Database Info

[Q] Unlocking alcatel one touch-maybe!!!

Hello i read this theard on forum android serbia.In this theard we can se way for unlock telenor touch plus.I don`t know did can unlock and telenor one touch ot 990 this way. I please senior members to see this and say their opinions>, did is true and can we use for alcatel one touch ot 990.
How to unlock your Telenor Touch Plus.
1: Make a note somewhere in your IMEI number and the MAC / address you may need it later if you unlock after the WiFi does not work or you have any problems with the MAC address. Settings - About phone - Status IMEI Wi-Fi MAC address
2: Backup your phone using MyPhoneExplorer, or any other program because it deletes all the data (phonebook, messages, calendar)
3: Download the following files on your computer: OUK_P736VV1.0.0B13 21.04.2012. last official ROM (Default Stock ROM)
Kod:
http://files.podtwo.com/roms/stock/zte/blade2/OUK_P736VV1.0.0B13-update_signed.zip
TMV_Stock_Recovery – Stock Recovery
Kod:
https://www.box.com/s/6506d76c3edc2d468cad
TMV_Unlock - Aplikaciju za otključavanje
Kod:
https://www.box.com/s/00067a33efece7000f07
QPST program za Backup / Restore data
Kod:
https://www.box.com/s/03202f2b7e0412874954
(The program is used to backup phone settings, IMEI, MAC address)
4th Rename OUK_P736VV1.0.0Bxx-update_signed.zip to update.zip and copy to your memory card into the main directory.
5th Unzip all three archives (TMV_CWM_Recovery, and TMV_Unlock Install_QPST_FromGAF
.6th Connect phone to computer via cable. In the phone options enable USB Debugging option Settings - Application - Development - Debugging USB
7th Unpacked from the archive TMV_CWM_Recovery run install-recovery-windows.bat and wait. Stock recovery will be recorded and the phone will restart. This may take a few minutes. If you get <waiting for device> to mean that drivers are not installed properly and Windows did not recognize the phone. When all is finished turn off the phone (if you're able to extinguish it, just remove the battery).
8th Hold the Power button and Volume Down until you see the FTM on the screen.
9.From Install QPST unpacked the archive, run Setup.exe and install program
Backup through QPST:
First: Do backup your data as it is all erased.
2. Remove the archive and extract it and run setup.
Kod:
https://www.box.com/s/03202f2b7e0412874954
3. Put yourself in the recovery through a combination of buttons Power + Volume down button
4.Run QPST and mind you do in the bottom status bar, you have the option Server Running .... if you do not go to the Server and the server from the Run menu option. Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S1.jpg
5.Now add your unit. Go to the Ports tab and Add the new port.Choose USB / QC Diagnostic port and click OK.
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S2.jpg
6. :Here you can view the list of ports you have chosen
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S3.jpg
7. Now click the Start menu and click on Clients Software Download.
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S4.jpg
8.Backup tab, then on Browse, and save the file somewhere on your computer and press Start. When it is finished you will have all the settings of your phone taken.
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S5.jpg
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S6.jpg
9. To restore the settings you go to the Restore tab. Over Browse button to open your settings and turn on Allow phone / file ESN mismatch, if necessary.
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S7.jpg
10.When all this is done, turn off the QPST program, run from a folder TMV_Unlock Download.exe on Start to start unlocking. This process takes up to 10 minutes. When all is finished, return the settings from QPST program, described in the step above and you have the phone unlocked for all networks.

LOCK THIS.

Hi dejanxxxx!
Why need to download OUK_P736VV1.0.0B13-update_signed.zip? It is not used until the unlock process...

Lenovo A60+ ROOTED stock rom (Philippines). WORKING contact identification.

Lenovo A60+ ROOTED stock rom (Philippines). WORKING contact identification either international format or local format.
this one works without any problems for PH Lenovo A60+ specially have tried ALL stock roms(chinese) and cooked/custom roms has problem with caller i.d. or number identification from international format (+63xxxxxxxxxx) to local format (0xxxxxxxxxx) in your contacts or phonebook. see instructions below to root your Lenovo A60+ without having issues/problems with caller/contact identification:
in ALL stock ROM and custom roms i have tried, ALL these have ISSUES or PROBLEMS with caller/contact identification. lets say:
a. your contact stored number is 0919xxxxxxx
b. 0919xxxxxxx calls you, the contact identification will show.
c. 0919xxxxxxx send you an sms/text. the contact will NOT show because the SMS sender is +63919xxxxxxx
twist:
a. your contact stored number is +63919xxxxxxx
b. 0919xxxxxxx calls you, the contact identification will NOT show. because the caller incoming number is 0919xxxxxxx and your phone number in contacts is 63919xxxxxxx. this two numbers is treated as two different numbers.
c. 0919xxxxxxx send you an sms/text. the contact will show because the SMS sender is +63919xxxxxxx
basically in the Philippines number formats sent by networks are:
receiving calls: 0919xxxxxxx or international format
receiving SMS/text: +63919xxxxxxx or local format
as said i have tried ALL(as of date january 14, 2012) stock roms and custom roms available in the internet for rooting this Lenovo A60+. have spent DAYS figuring out and trying out(kaskus, xda-dev, symbianized, etc). dont look any further and waste time like what i did. this procedure is for you to save yourself days and time lost!
----------------
DISCLAIMER: i am not responsible for any lost of data, your phone bricked or loss of your phones warranty. remember that ROOTING an android device VOIDS manufacturers WARRANTY. I DO not HOST any of these files.
BEFORE rooting, do this necessary steps:
1. backup your phone's IMEI. this is likely to be erased/lost in ROOTING or installing new roms. thus you wil get an "Invalid IMEI" message or your sim cannot locate networks or has no signal. check google play for IMEI backup apps and backup into your SD card. otherwise read the tutorial after on how to re-create your IMEI file and restore into your phone system.
2. BACKUP your contacts and messages/sms, applications etc. most likely all data will be lost too. so you need to restore it after ROOTING procedure.
3. DISABLE and turn off any anti-virus softwares in your PC and any PC to Phone applications such as IdeaTool, MobileGO, Snap Pea, Etc. so that this will NOT interfere with the rooting procedure.
----------------
TUTORIAL PROPER in rooting your Lenovo A60+ ROOTED stock room version with SU(superuser apk and binary), the EASY and beginner/newbie way:
Download these files and tool:
1. Philippine STOCK Lenovo A60+ ROM version A60+_ROW_S310_120823 ROOTED with SU or superuser: mediafire.com/?n1i35c3neu6ud3d - Size 125.45 MB - DO NOT unzip this.
2. Mobileuncle apk and Recovery Image: mediafire.com/?bo12ktkrrn57314 - Size 5.29 MB - unrar this to get a.) mobileuncle.apk b.) recovery.img
3. Windows Driver: mediafire.com/?31nddwqdot5ajp2 - Size 10.89 KB - UNZIP this. this is for your PC to read your phone via flashtool (so link number 4 will be able to communicate PC to Phone/Device).
4. Flash Tool: dropbox.com/s/f7gfyqtwyn5qkpa/ISO-8859-1__Flash tool.rar - Size 3.60 MV - unrar/unzip this to get "Flash tool" folder.
5. Firmware Upgrade: mediafire.com/?ehiyzbdmlauo7i7 - Size 166.59 MB - unrar/unzip this to get the folder "Boot". this is a chinese custom rom firmware build number A60+_S312_120630 with SU(superuser) and mobileuncle tools 2.3.6 pre installed and a lot of pre installed bloatwares. dont worry will be removing this and installing an english language rooted rom anyways.
Follow these step by step, with SIM cards REMOVED from the phone/device:
Step 1: Prepare needed files and copy to SD Card the three files:
a.) a60+ori.zip (link number 1) should be zipped file so DONT unzip this.
b.) mobileuncle.apk (unzipped from link number 2)
c.) recovery.img (unzipped from link number 2)
into the root/top folder of your SD card. see screenshot here: http://screencast.com/t/AvBLMyth
Step 2: INSTALLING the PC drivers - Turn off the phone, take the battery out, connect your phone to the pc(while battery is not inserted) via usb cable. your pc will detect your device and will try to search and install drivers. MANUALLY install(manually select the drivers pointing to the drivers folder on your pc) the drivers in the unzipped folder "MT6575 USB VCOM drivers" (link number 3) appropriate for your windows version(xp/vista/7).
Step 3: ROOTING with Flashtool - unplug usb cable from your phone, insert the battery (do not turn on the phone/device yet).
Run Flash Tool(Flash_tool.exe in the unzipped folder of link number 4). screenshot here: http://screencast.com/t/BLOR3S0Nn1
while in flash tool window:
a.) Click scatter-loading at the upper right corner of the flashtool window.
b.) browse to "Boot" folder which was extracted/unzipped in link number 5.
c.) select MT6575_Android_scatter.txt file and click open. see screenshot: http://screencast.com/t/6TaKi73J
d.)
d.1. Tick/Select all 9 options.
d.2. Click "Firmware -> Upgrade" button at the top.
See screenshot: http://screencast.com/t/OIKfwN0s
d.3. Flashtool will now be SEARCHING or WAITING for your device to be connected and ready to flash/write the files you selected in step d.1. see screenshot: http://screencast.com/t/1H3By7t3wsll
Step 4: while your phone is TURNED OFF, NO SIMS, NO SD card,.. and it has its battery on it; on your phone/device HOLD(press and dont release) "volume +" or "volume up" key(top-right side of your phone) and plug the cable until the progress bar at the bottom is running, when the progress bar turns RED, you can RELEASE the "Volume up/+" key. see screenshot: http://screencast.com/t/wDPM9Ym8AHG
Wait around 5 minutes. the progress bar at the bottom will show as RED then YELLOW, then TEAL. wait until a green circle in a pop up window appears. when the green circle appears; this mean success in flashing with the rom upgrade. see screenshot: http://screencast.com/t/OGLHkf55
Step 5: Close Flashtool application in your PC. unplug the phone/device USB cable. turn on the device you would notice the default language is Chinese. to change language, go to settings(purple icon with gear), scroll down to languages(violet icon with letter A). select first option at the top. tap English.
Step 6. INSTALLING MOBILEUNCLE CWM RECOVERY - Turn off your phone/device and insert your sim cards and your SD Card(the SD card you copied the 3 files in Step 1). turn it back on. on "New Sim Detected" pop up window. just close it.
6.a. turn OFF "GPS" and "Data conn." at the top(swipe the top area going down).
6.b. open the application "FileBrowser" which is pre installed in the firmware. browse to your SD card's root and install mobileuncle.apk that you copied in step 1(this is version 2011.01.04v1.2). a pop up window will show "Install blocked". tap "Settings" tap or check "Unknown sources". Tap "OK" on the "Attention" window. tap on back. tap again on mobileuncle.apk tap install. tap open. tap get started. tap OK in the chinese pop-up window.
6.c. tap on "Flash Recovery From SdCard" (its the second option from the top). tap on "recovery.img" then tap "OK". Superuser will pop up and quick tap OK to grant superuser permission.
6.d. the phone will reboot and enter CWM-based Recovery v6.0.0.3(english version, CWM stands for ClockWorkMod).
Step 7. INSTALLING THE STOCK ROM WITH ROOT USING CWM - IN CASE that the phone/device did not enter CWM recovery but booted as regular boot. turn the phone off. turn it back ON while you HOLD on the "Volume +/up" button. this will enter to CWM-based Recovery. otherwise proceed with steps below:
7.a. while in the CWM-based Recovery console, Lenovo A60+ touchscreen doesnt work. the hardware volume up and down works as buttons to scroll up and down. while the power button works as the SELECT button.
7.b. scroll down twice(press volume down button twice) to highlight "wipe data/factory reset" option. press power button to select it. scroll down and highlight "Yes -- delete all user data". press power buttn to select. wait for around 20 seconds to complete.
7.c. scroll down to "wipe cache partition" and press power button. scroll down to "Yes - Wipe Cache". wait 2 seconds to complete.
7.d. scroll down to "install zip from sdcard" and press power button. press again power button to select "choose zip from sdcard".
7.e. scroll down to locate and highlight "a60+ori.zip". press power button. confirm the install by scrolling down and select "Yes - Install a60+ori.zip". wait for around 1 minute for the process to complete. the process completes with the console last text "Install from sdcard complete." shows at the bottom while you will be able to choose from the options at the top again.
7.f. scroll down and select +++++Go Back+++++ then select "reboot system now".
Step 8: FIX on INVALID IMEI AFTER SUCCESSFUL ROOTING - by now you have a ROOTED A60+_ROW_S310_120823 ROM. all apps are working EXCEPT that your phone has "Invalid IMEI". this is because Device IMEI's are UNIQUE to each phone. now, lets fix this!!!
files and tools to download:
8.1. download t-kstore.com/imei.zip - Size 4.22 MB - its a dos based IMEI generator and encryptor and write to file.
8.2. download download.estrongs.com/app-es-file-explorer.html - Size 2.81 MB - an apk "es_file_explorer_v1.6.2.4.apk" and application to manage files in your android device. copy the es_file_explorer_v1.6.2.4.apk file to your SD card's root/top folder.
8.3. RE-CREATING your phone/device IMEI - locate your Unique Lenovo A60+ IMEI. there are two places these 15 digit number can be located. FIRST is when you open your phone, its in the sticker attached to your phone under the battery. on Philippine released phones its in between the stickers of Lenovo and NTC stickers. SECOND location is the sticker on the side of your phone's Lenovo box/carton/package.
8.4. extract/unzip imei.zip that you downloaded in 8.1.
8.5. go to the extracted folder and run "dos.cmd". this will run a DOS console window in your pc.
8.6. in the dos command line type:
imei.exe 123456789012345 123456789012345
then press enter to execute the command line.
whereas, the first set of numbers is your IMEI #1 and second set is your IMEI #2 as you located in Step 8.3.
after pressing enter this will generate your encrypted IMEI file with the name "MP0B_001_NEW". see screenshot: http://screencast.com/t/lUUzC3yiTNn
8.7. close the dos console window. rename that file generated "MP0B_001_NEW" to "MP0B_001" (without the qoutes) in the folder where you extracted imei.zip
8.8. copy MP0B_001 to your phone's sd card. for this tutorial just copy it to your sd card's root folder.
8.9. INSTALLING ES Explorer, moving the IMEI file to the phone's correct system folder - install and run es_file_explorer_v1.6.2.4.apk which you previously downloaded and copied to your SD card in step 8.2.
8.10. open ES File explorer on your phone. first window on first run just click okay. tap on the bottom left button of your A60+. tap "Settings". tap "File Settings" select or check "Show Hidden Files". tap back. scroll down and tap "Root Settings". tap or check "Root Explorer". SU pop up will show and grant root or tap yes to give privilege to ES File Explorer. tap or check "Up to Root" and "Mount File System". tap back twice.
8.11. on your sdcard's root/top folder locate the file MP0B_001 which you copied in your sd card in step 8.8.
long press on the icon then tap "Copy". a little pull up window will show at the bottom(which is the clipboard of es file explorer).
8.12. tap the "favorites" icon at the top-right corner. tap the device icon or the one with "/" which is to the right of the HOME or house icon. this will bring you to the root folder of your device. navigate(navigate by tapping the folders) to: /data/nvram/md/NVRAM/NVD_IMEI/
you will see 3 files. long press on the MP0B_001 then select "Delete". yes DELETE you wont be using this anyways. tap okay when youre asked to confirm deletion. at the bottom, swipe up the es file explorer's clipboard. tap on MP0B_001 icon which is in the clipboard. a message will show something like "MP0B_001 successfully copied...". exit es file explorer. RESTART your A60+.
EUREKA!!! you strike gold! you now have a ROOTED A60+ with working caller/sms identification.
Step 9: restore your backups, apps, sms, contacts, settings.
------------------
SHOUTS to: "mingxincun" (who cooked the stock rom to have SU and ROOT), Tyo Ramadhan(Indonesia LE group), T&K Online Store(for the imei fix), kaskus, xda-dev, symbianized pinoys and FB Lenovo A60+ users/fan page in facebook.com/lenovoa60plususers
repost from here: http://www.facebook.com/notes/guill...orking-contact-identification/539507352727233

PERFECT!!!
Dude thanks man. this is timely for everybody here in the PH. but untimely for me, unfortunately i followed the steps of kaskus. haha
nevertheless this is cool.
bro for others to really appreciate this post, you got to put them hyperlinks right.
Im copying the flashtool link but it gives me this bandwidth error, because Ill just be needing the root access. android market wont download apps i need to replace it.
nag eenglish lng ako pra mka benefit din yung mga forangers. hihihihi

Could you also help us how to swap sd card with internal storage? so that apps could directly install in the external sd card.

Link2SD
thanks for the tut bro!!!
to increase internal storage of A60+
we need to install Link2SD
Using Minitool Partition wizard
we need to create 2 partition in our SD card
first partition must be set to Primary & Fat32
second partition must be set to Primary & ext4 (A60+ doesn't recognized fat, fat32, ext2, & Ext3 in second partition)
please note that the second partition even we sized it as 2gb when we open the link2SD storage info
the second partition display it as 1Gb only, but worry not it will still going to use the other space yuo have created
mine, was set to 2gb and have transferred 153MB of files to the second partition
and it is still showing 100% free and used: 153MB
@guilliam perhaps you can add this to your tut.
Thanks again..God Bless!

thanks for this i have rooted my lenovo a60+ hehe, there's one problem i've encountered when i go to setting and click on the about phone the settings becomes force close, is it happened to you? well i had follow the instructions though.. anyway thanks for this TUT hehe hope there will be rom for our lenovo a660+ which had no bugs at all hehe

Guidance needed!
Hello Guiliam
Thanks for such a detailed post. I am quite new to this, and just have some basic understanding on the rooting/flashing etc. I am planning to root my Lenovo A60+ which I have bought in China, which has unnecessary bloatware and more importantly there is no Google Play app in that. I am based in India, and would want to know if your ROM will work for me as well?
Is your post only covering Rooting part or does it also cover any flashing part (custom ROM), the reason I ask is because apart from rooting, I also want to install the ROM which is in English (or can the language be changed automatically?)
I am looking to root my "Lenovo A60+" - primarily for reasons like:
1. I do not have stock Google Play Store app, and I am not sure how to download that app.
2. I have bought this phone in China, and there is lot of unwanted Chinese software which I want to get rid of.
3. I want to get rid of the Chinese keyboard (iFlytek) and only have Android keyboard.
I have questions like:
1. If my rooting fails for some reason, can I un-root the device to restore it to the previous state (i.e. with all the stock apps)
2. I want to avoid bricking my phone, even if it happens, will I be able to go back to the previous state by un-rooting?
Some details of my phone:
Model - Lenovo A60+
Android version - 2.3.6
Build number - A60+_S318_121108
Baseband version - MAUI.11AMD.W11.50.SP.V13.P10,2012/07/13 13:26

"Step 2: INSTALLING the PC drivers - Turn off the phone, take the battery out, connect your phone to the pc(while battery is not inserted) via usb cable. your pc will detect your device and will try to search and install drivers. MANUALLY install(manually select the drivers pointing to the drivers folder on your pc) the drivers in the unzipped folder "MT6575 USB VCOM drivers" (link number 3) appropriate for your windows version(xp/vista/7)."
Anyone I need help...I dont get this step >_<"

Eternal29 said:
"Step 2: INSTALLING the PC drivers - Turn off the phone, take the battery out, connect your phone to the pc(while battery is not inserted) via usb cable. your pc will detect your device and will try to search and install drivers. MANUALLY install(manually select the drivers pointing to the drivers folder on your pc) the drivers in the unzipped folder "MT6575 USB VCOM drivers" (link number 3) appropriate for your windows version(xp/vista/7)."
Anyone I need help...I dont get this step >_<"
Click to expand...
Click to collapse
You'll need to cancel Windows looking for the drivers. Of course, the installation will fail.
Then go to Device Manager and look for the device with the "!". Right-click on that device, choose Update Driver then locate the drivers that you downloaded.
---------- Post added at 03:19 PM ---------- Previous post was at 03:15 PM ----------
Thanks a lot for this excellent tutorial!
I've just successfully rooted an a60+! Now I can get Link2SD to work on this.

anasuri said:
Hello Guiliam
Thanks for such a detailed post. I am quite new to this, and just have some basic understanding on the rooting/flashing etc. I am planning to root my Lenovo A60+ which I have bought in China, which has unnecessary bloatware and more importantly there is no Google Play app in that. I am based in India, and would want to know if your ROM will work for me as well?
Is your post only covering Rooting part or does it also cover any flashing part (custom ROM), the reason I ask is because apart from rooting, I also want to install the ROM which is in English (or can the language be changed automatically?)
I am looking to root my "Lenovo A60+" - primarily for reasons like:
1. I do not have stock Google Play Store app, and I am not sure how to download that app.
2. I have bought this phone in China, and there is lot of unwanted Chinese software which I want to get rid of.
3. I want to get rid of the Chinese keyboard (iFlytek) and only have Android keyboard.
I have questions like:
1. If my rooting fails for some reason, can I un-root the device to restore it to the previous state (i.e. with all the stock apps)
2. I want to avoid bricking my phone, even if it happens, will I be able to go back to the previous state by un-rooting?
Some details of my phone:
Model - Lenovo A60+
Android version - 2.3.6
Build number - A60+_S318_121108
Baseband version - MAUI.11AMD.W11.50.SP.V13.P10,2012/07/13 13:26
Click to expand...
Click to collapse
I'm in the same situation!
Did you root it yet?

sir do you have root procedures for lenovo s720?

dehq said:
I'm in the same situation!
Did you root it yet?
Click to expand...
Click to collapse
Rooted it today, and it's awesome!
It has Google Play
Thank you, @guilliam!

the link #4 ( dropbox ) is not working. has exeeded bandwith ;o(

Does anyone have ROM with Polish language?

Thanks Very Much
You saved my life dude. Thanks a lot.

Can we fix the contact id on all rom or just that rom you attached.
Stock rom is ok but it can't play some game that others rom can (Bad pigges, ashalt 7 can run on S317 but S3110 and S311 can't)
PS. Does anyone have A60+ row s311 121023. Please backup and sent it to me. [email protected]. Thank in advanced because I want to unroot my device for guarantee

Worked simpleee
As simple as its is.. U can stop @7 if IMEI is fine with ur device as was with mine..
---------- Post added at 01:54 PM ---------- Previous post was at 01:49 PM ----------
Can u help to format now after rooting the device once by the above method? The usual method by pressing the vol- key doesnt work anymore...

Question, I need help!
Hi, thanks for the great tutorial, I have successfully rooted my Lenovo a60+! My question is, can I install custom ROMS on my freshly rooted phone? Popular ROMS like Cyanogenmod or Paranoid Android require phone compatibility, and my phone is not on their list. I'm starting to feel sick after I have rooted my phone because I have no idea yet how to install custom roms (which was my main reason of rooting), will you be nice to me by answering these questions?
- Does custom ROMS do require phone compatibility?
- Are all or some custom ROMS compatible to all android phones as long as they are rooted?
- If so, do you have a list of ROMS that are compatible to my Lenovo a60+?
- Lastly, please tell me that there is a way to upgrade the phone's OS from gingerbread to jelly bean or even ice cream sandwich.
Please help me! I have an empty rooted Lenovo a60+ and I need a custom ROM to be installed before I put my data back again. Thanks in advance, and also for the root tutorial. ))

Please! Anyone! Heeeellpp!!!
My Phone is Bricked!
It stays in the Lenovo screen and will not eventually boot up.
I have installed Chainfire 3D from the market and was surprised that it did not have the options that I was expecting from the tutorial, so I read the description on the application, it says, ''Driver not installed, you need to install driver before you can access options''. So i installed the drivers, then everything was ok, I can still use my phone, but Chainfire 3d still needs me to update the drivers, so I did, then, suddenly, my phone's screen just froze, and I cannot access my notifications, home back menu keys, power button, in fact my screen does not work anymore. Feeling nervous, I left it untouched for an hour and checked it back its still the same the moment i left it. So I took the battery out, tried to turn it on again, and now, I'm stuck with the Lenovo screen and will not boot up to stock ROM, please Help me! I need my phone as soon as it is fixed! Please HELP!!!
Here are the details of my rooted Lenovo A60+:
- Followed the rooting process here, so I have Clockwork recovery mod 6
- Has a installed Chainfire 3d 1.7
- Installed stock ROM
- Has no backups
- Can access the recovery mode
- Already done the ''wipe data'' ''wipe cache'' ''factory reset'' and everything, wiped my phone clean.
Please help me, my parents are going to kill me if I can't fix my phone.

Thanks for the post. When I tried I got an error "S_PART_NO_VALID_TABLE (1037)" after the status bar showed 100% in red colour. Need help please. Thank you.

Thank you for the post but it cannot work
Error S_PART_NO_VALID_TABLE (1037), and the status bar stays 100% red color. Anyway, thanks

[Q] ZTE V5 Red Bull V9180 WCDMA 2GB RAM, 8GB ROM- root, cwm

So by today (22.09.2014) is your phone oficialy renamed from "ZTE Red Bull V5" to "ZTE V5"
POSTING A PROBLEM
If you have some sort of problem with your device please please get us this info, so we could help you:
1-what rom/firmware are you using
2-what recovery
3-if you have rooted your device
4-what caused the problem
5-step by step description what you did before the problem shows up.​
Hi i just made this thread to make a base for everyone who bought this (form me) superb phone.
So far we got root, custom recovery, and many chinese roms (based on Nubia UI, Color OS, LEWA OS, FROG OS...).
There are Mokee AOSP 4.4.4. rom in develpoment and CM11 in development, CM12 also.
2015.02.13 - Latest firmware is 1.17 (andorid 4.4.2, nubia UI2.5.1)!!!
Changelog(google translation from chineese):
-optimize the signal problem
-solving open U disk mode or restart the phone, ringtones revert to the default issue
into the video again, this video from one schedule to start playing the video
-update time management software, to solve the problem of the shutdown alarm clock does not ring
-media library interface, Pictures Pictures folder appear as a blank
-to use the gallery under OTG open unsupported file error
-switching to the media library interface, multiple exposure, suggesting that language View screenshot untranslated
-save the video recording status suspended again after recording, the Pause button to display the error
-optimization manually Focus
-video recording in the recording pause again, long display of detailed information is incorrect
-horizontal screen - portrait - horizontal screen operation, not full screen
-video player interface to open the USB mass storage press the return key error
here is link to my google drive. It contains stock roms from 0.50 to 1.12, GAPPS ect. Also contains tools to root and flash custom recovery.
MY GOOGLE DRIVE ZTE V9180 FOLDER
In my Google Drive there is also two custom recovery CWM and TWRP (thanx a lot to FAZERGOO from 4PDA.ru, here on XDA it is fazerg, so please thank him for his work)..the script in my root+recovery folder is updated, so you have option to flash CWM (6.0.5.1) or TWRP (2.8.0.0.)
here is list of commands you can dial in dialer and get some hidden menu and settings:
*#06# - displays IMEI
##36 - update server settings for OTA
*#*#4636#*#* - display phone information, battery information, battery history, usage statistics, WiFi information
*#406# - touch screen calibration
--proximity sensor calibration--
*#777# - no cover of proximity sensor
*#776# - cover proximity sensor with hand 2-5 cm above..so the bar is in the green
*# 405# - MHL test
to go to recovery you have to poweroff the phone and hold "vol+" and "power" for 2 sec
to go to safe mode....???
best resources for ROMS (chinese sites):
bbs.anzhi.com
www.tdbeta.cn
www.ztehn.com
And of course our friends from Russia thread:
www.4pda.ru
proDOOMmans mega drive where you can find all Mokee, CM11, PAC roms:
HERE! and dont forget to hit THANKS button for everyone who develop and help us to use this device!!!!
TIPS & TRICKS
-HOW TO CHANGE LCD DENSITY and switch to phablet UI!!! Beware, the camera app is little bit smaller then the screen, becaouse of the density, but still works well.
-HOW TO ADD ONE HAND FEATURE
-did you know that when holding home button on locked screen lights a flashlight?
-when you double tap home button on locked screen the time changes to media player controls?
-when you tap several times on any home screen your glas will broke?
-when you zoom out with two fingers on any home screen you will get into screen manager?
-in alarm clock app there is setting "power of alarm", when turned on, you can turn off your phone at night and the phone turns on by itself in the alarmclock time and wakes you up?

complete guide by navin_n
People always asking again and again on flashing ROMs, Recovery, GApps, Root etc. So, I have made detailed step by step guide for this. Hope now it will be clear to everyone for these processes:
BEFORE YOU DO ANYTHING FROM FOLLOWING, PLEASE MAKE ANANDROID BACKUP, BEST WITH TWRP!!!​BECAUSE TWRP CAN MAKE BACKUP INCLUDING PRESIST AND MODEMST PARTITIONS!!![/CENTER]
GUIDE TO FLASH STOCK ROM:
NOTE:
1. Be sure to backup all important data (contacts, messages, call records, etc.) before proceeding
2. Ensure that Phone Battery is at least 40%.
3. Downloaded required STOCK ROM.
4. Phone with Stock Recovery.
STEPS:
1. Copy the downloaded zipped STOCK ROM to the root directory of External SD card or Internal SD card.
2. Power-off the phone.
3. Put the phone in the Recovery Mode and for this you need to press Vol+ and Power button at the same time for few secs and then release the Power Button.
4. In the Stock Recovery, perform wipe data/factory reset and wipe cache partition (In the menu, use +/- volume keys to scroll up/down & power button for confirmation).
5. Depending on which SD card you have copied the zipped STOCK ROM, choose "Apply update from /sdcard" or "Apply update from external /sdcard" accordingly.
6. Select the zipped STOCK ROM to flash.
7. Wait until you get the confirmation of successful flashing.
8. Reboot the phone by selecting "reboot system now".
9. DONE. (Initial boot may take some time so have patience.)
GUIDE TO INSTALL CUSTOM RECOVERY + CUSTOM ROM:
AS FOR CERTAIN REPORTS IT IS STRONGLY RECOMMENDED TO FLASH CWM RECOVERY IF YOU HAVE 1/8 VERSION
REQUIREMENTS:
1. Be sure to backup all important data (contacts, messages, call records, etc.) before proceeding.
2. Working Windows PC with ADB Drivers installed - without proper installation of drivers the process will not be successful.
3. Ensure that Phone Battery is at least 40%.
STEPS: (If you need only Custom Recovery, then follow the steps from 2 to 7, other steps you can skip)
1. Download the required zipped Custom ROM and copy it to the root directory of External SD card or Internal SD card.
2. Download the Recovery Tool zip file. (Link to download the Tool) . Make sure to download whole files. After that copy the zipped file to the root directory of C:\ or any place you prefer and then unzip the downloaded file.
3. Enable USB debuging mode. ("Menu Button" >> System settings(Settings) >> About phone(On the phone) >> Tap 6 times on Build number>>"Back button">> More >> Developer options >> Enable USB Debugging)
4. Connect the phone to the PC.
5. Go to the folder where you have unzipped the Recovery Tool file, and then execute the batch file "run.bat".
6. In PC, new window will open. Input your choice of Custom Recovery accordingly.
7. Follow the steps on-screen until all completes.
8. After completion, in the Fastboot menu, select "Boot recovery".
9. If the Custom Recovery was flashed succesfully, you will get CWM or TWRP recovery menu.
10. Perform wipe data/factory reset and wipe cache partition.
11. To flash the firmware: Select "Install ZIP" >> "choose zip from sdcard0 or sdcard1" depending on which SD card you have copied the ROM, external or internal >> Select Custom ROM >> Click Yes to flash selected ROM.
12. Wait until you get the confirmation of successful flashing.
13. Reboot the phone by selecting "reboot system now".
14. DONE. (Initial boot may take some time so have patience.)
GUIDE TO INSTALL GAPPs & ROOT:
REQUIREMENTS:
1. Backup all important data (contacts, messages, call records, etc.) before proceeding, if necessary.
2. Requires CUSTOM RECOVERY.(Mandatory)
STEPS:
1. Download appropriate flashable zipped GAPPS & ROOT files and copy it to the root directory of External SD card or Internal SD card.
2. Power-off the phone.
3. Put the phone in the CWM or TWRP Recovery Mode and for this you need to press Vol+ and Power button at the same time for few secs and then release the Power Button.
4. Flash the zipped files (one at a time): Select "Install ZIP" >> "choose zip from sdcard0 or sdcard1" depending on which SD card you have copied the file, external or internal >> Select Zipped File >> Click Yes to flash selected file.
(No need to do wipe data/factory reset and wipe cache partition)
5. After successful flashing, reboot the phone by selecting "reboot system now". If it ask to fix the permission when you reboot, select Yes.
7. Wait until you get the confirmation of successful flashing.
8. DONE. (Your phone will have GApps and Root Permission)
and don´t forget to hit thanx button to @navin_n, @fazerg and me maybe @DallasCZ

APPS taht can be remover (thanx navin_n)
If you have already Rooted your device then you can easily uninstall the system apps using "Root Uninstallers" available in Google Play.
However, for me , i prefer to use Root Explorer and delete the apps from system folder. The following apps are safe to delete but still i advise you to backup the files before deleting. If you use Root Explorer, make sure to change attribute of the system folder from Read Only (R/O) to Read Write (R/W) when deleting.
Be ware you make it on your own!! If there is also odex file, delete them too!!!
APPs that can be deleted:
folder --> /system/app
nubia_account.apk - only if you log in in nubia account (maybe you need this to use themes)
nubia_Calculator_v1.2.1.apk - calculator app (i dont like it so i installe another one and delete this)
nubia_Calendar_v1.0.apk - nubia calendar app
nubia_ClockWidget.apk - clock widget
nubia_Music.apk - nubia music player
nubia_myfile.apk - nubia file manager
nubia_NBSecurity.apk - nubia antivirus and system cleaner
nubia_NotePad_v1.1.5.apk - nubia notepad
nubia_zbiglauncher_v2.0.apk - nubia launcher for old people (everything is biiig)
NubiaPlatLogo_V1.0.0.apk - nubia lanim showing when you tap on NUBIA version in "about phone"
ZAppDataBackup.apk - nubia main app for backup your phone
ZDataBackup.apk - nubia backup app
ZQuickSearchBox.apk - nubia quick search box (if you install GAPPS it contains original google search box)
ZVideo.apk - very basic media player
If you dont use Live Wallpapers you cen delete the main app:
LiveWallpapersPicker.apk
and of course all livepaper apks
BasicDreams.apk
HoloSpiralWallpaper.apk
LiveWallpapers.apk
MagicSmokeWallpapers.apk
NoiseField.apk
PhaseBeam.apk
folder --> /system/preset_apps
TP_360AppStore_1.9.203.apk
TP_360Video_1.2.0_Nubia.apk
TP_BaiduInput_1000541a.apk
TP_baidumap_6.2.0.apk
TP_baiduvideo_5.3.0.apk
TP_gowhere_1044_131118_150501.apk
TP_iReader_2013122410.apk
TP_JdAndroid_2.6.0.apk
TP_QQ_4.2.apk
TP_QRCodeScaner_v1.0.apk
TP_tieba_5.5.2.apk
TP_Weibo_4.0.0_602.apk
TP_weixin_502.apk

Hi, I'm interested in buying this phone.. Could you tell me your first impressions?
It seems very good but I can't see any support for it, even if it has a Snapdragon 400..
Sent from my VOTO X2

DallasCZ said:
ROOT
the only way to root it so far is to run an Chinese exe, which will root your phone and install superuser (chinese one). Then you need to uninstall the superuser and install one from google play.
CWM
so far there is only chinese CWM 6.0.4.6..looking for someone who can make it english.
Click to expand...
Click to collapse
Hi, can you please provide me the exe file to root and explain me the process to root? I would be really grateful for your help! Thanks
I have WCDMA/GSM V5 3G 9180

ROOT CWM
Hello,
i made a simple bat file, which will root your phone, install custom recovery or original recovery.
here is the link: Dallas Google Drive.
you made everything on your own ..i am not responsible for any phone software/hardware damage.

jday17 said:
Hi, I'm interested in buying this phone.. Could you tell me your first impressions?
It seems very good but I can't see any support for it, even if it has a Snapdragon 400..
Sent from my VOTO X2
Click to expand...
Click to collapse
Hi,
there ar ea lot of Chinese phones, this phone is ment to be sell china only.
There are many forums but in Chinese.
I wrote a little review on gizchina.cz (is in Czech language,so use google translator)

TIP
For new users i recommend do this:
-boot your phone and see vhich version of formware you have (latest at this time is 0.50).
-If you have 0.44, then go to dialer and dial ##36. You get to the menu where you can select which server will be used for updates (at this time is 0.50 only for few people for feedback). then go to ybout phone and tap serach for updates and you get the update.
-after update is installed, go to about phone and tap 5times "build number" line , go back and go to "more" and "developer option" and turn on usb debugging.
-launch my root.bat, select root your phone and th ephone will reboot to bootloader and will be rooted.
-now you can install custom recovery (from my bat.file) it is bilangual CWM 6.0.4.9 recovery. Everything works fine as i used it.
-now after root and cwm recovery installed, make backup of your 0.50 rom and then you can proceed to delete bloatware (a lot of bloatware).
for rotted phones with CWM recovery:
if you want to make update from ZTE OTA, you have to load original recovery, the one in my package is not functional with update to 0.50 and above, so you have to flash from CWM recovery this package, then reboot and get the proper stock recovery, which will be functional with the update 0.44-0.50 and later.

DallasCZ said:
For new users i recommend do this:
-boot your phone and see vhich version of formware you have (latest at this time is 0.50).
-If you have 0.44, then go to dialer and dial ##36. You get to the menu where you can select which server will be used for updates (at this time is 0.50 only for few people for feedback). then go to ybout phone and tap serach for updates and you get the update.
-after update is installed, go to about phone and tap 5times "build number" line , go back and go to "more" and "developer option" and turn on usb debugging.
-launch my root.bat, select root your phone and th ephone will reboot to bootloader and will be rooted.
-now you can install custom recovery (from my bat.file) it is bilangual CWM 6.0.4.9 recovery. Everything works fine as i used it.
-now after root and cwm recovery installed, make backup of your 0.50 rom and then you can proceed to delete bloatware (a lot of bloatware).
for rotted phones with CWM recovery:
if you want to make update from ZTE OTA, you have to load original recovery, the one in my package is not functional with update to 0.50 and above, so you have to flash from CWM recovery , then reboot and get the proper stock recovery, which will be functional with the update 0.44-0.50 and later.
Click to expand...
Click to collapse
Thanks for the info! I'm currently updating to 0.5 and will let you know if I manage to root it too.
I`ve read the review and mine phone too has the squeaky back cover. It started squeaky after just few back panel removals. This is not a concern for me, but I wanted to ask you something else: How is you call quality? When I do calls the other side can hear me perfectly but the sound through my ear speaker is muffled and not very clear. Increasing the volume make it even worse. Do you experience such an issue?

-the back cover is really squeaky (i allready ordered another one)
-I am very happy vith the call quality. I had a nexus s whos volume vas up to 100%. Now i am about 60% and everything is loud and clear as i can hear
root and installing cwm is like a charm..i made it in the las 2 weeks (as i own the phone) about 10times
one Question: If you reboot the device do you also have the message "android is upgrading" every time no matter what you do or not do with the system?

DallasCZ said:
-the back cover is really squeaky (i allready ordered another one)
-I am very happy vith the call quality. I had a nexus s whos volume vas up to 100%. Now i am about 60% and everything is loud and clear as i can hear
root and installing cwm is like a charm..i made it in the las 2 weeks (as i own the phone) about 10times
one Question: If you reboot the device do you also have the message "android is upgrading" every time no matter what you do or not do with the system?
Click to expand...
Click to collapse
- I tried updating to 0.5 both through FOTA and with direclty downloaded update from the chinese official site to the sd card, but I always get some error (forgot what it was), will try tomorrow once again.
- My apps are upgrade after each reboot too. I was hoping that 0.5 will fix this issue, but It seems this is not the case.
- I'm on the hunt for a new back cover too, but I will wait for the official blue ones Share your thoughts on the one you purchased after a few days of usage
My only problem with the phone I experience is the bad incoming sound quality during calls. I will have try another sim card.
ps: boy this phone is a beauty

HuKuTo said:
- I tried updating to 0.5 both through FOTA and with direclty downloaded update from the chinese official site to the sd card, but I always get some error (forgot what it was), will try tomorrow once again.
- My apps are upgrade after each reboot too. I was hoping that 0.5 will fix this issue, but It seems this is not the case.
- I'm on the hunt for a new back cover too, but I will wait for the official blue ones Share your thoughts on the one you purchased after a few days of usage
My only problem with the phone I experience is the bad incoming sound quality during calls. I will have try another sim card.
ps: boy this phone is a beauty
Click to expand...
Click to collapse
Hi, can you please tell the name of chinese official site for our phone? thanks!

SITES IN cHINESE LANGUAGE
Hello,
so there are many sites. To see attachments you have to register to the sites, which is a little bit tricky due to instatnt need of translation in the registration process, but it can be done.
official with a lot of new information also from ZTE service:ztehn.com
the best for custom ROM and Recovery (development):anzhi.com
to see anzhi.com you need to add two adress in your windows hosts file see here
also some good information can be found here on myzte.cn

another tip
-If you get the "android is upgrading" on every boot, then you have to uninstall titanium backup, reboot, wait 3 minutes and let the system settle down, then install titanium again, reboot, and its done.
-if you want to restore WIFI access point and passwords form Titanium Backup, use backup from tar file, not from XML!!!

Waiting on a custom rom
Hello everyone,
I used the method I found at needrom.
It did the trick; the device was rooted, gapps installed, an multilangual.
But I didn't manage to install the latest update (50). I thought it was because the device was rooted, so I removed root, whitout succes, I am still not able to install the update.
Also I think the contact manager is buggy; newly added contacts dissapear after rebooting the device, it doesn't matter if I sync the device. I have to import my contacts from my SD card every time this happens.
So, I hope there comes a good custom rom for this device with this excellent hardware! I have Miui unofficiall on my Xiaomi Mi2s, it works like a charm. I hope soon this device appears on the list one of these days

update
-if you installed the ROm from needrom, i think you cannot upgrade to 0.50.
-on www.ztehn.com you can download the full 0.50 rom (only english and chinese language) this rom you can flash.
-contacts: If you are in contacts, press "more" and "advanced" and check the "default storage" it must be set to your google account. Then go back and check "display settings" and check which accounts are to show in contact list.
I had same problem and the problem was, that all new contact automaticly save to local storage and i have the local storage unchecked to display..so i havent seen my newly added contacts!!!

I have same issue
I have same isse. I dont hear anyone. But everyone hear me. i think that built in speaker doesnt work.

ZTE v5 DualSIM v1.06 beta released (4.4.2 + Nubia UI 2.0, package contains new recovery, H106 update package and G050 restore package)
http://pan.baidu.com/share/link?shareid=2878143782&uk=2436317143 Pass: [COLOR=#0640]j7cb
MD5:[/COLOR][COLOR=#0640]3C318AE402AC5424444F5862B540AF2D
[COLOR=#0640]Uploaded to my MEGA acc: link (1.06 unzipped too)
[COLOR=#0640]BETA release [COLOR=#0640]but seems stable (according to chinese forum feedbacks) I will try thi[COLOR=#0640]s next week, when i receive my v9180 2/8G. [/COLOR][/COLOR][/COLOR]
[/COLOR][/COLOR]

I sucessfully installed 1.06 and its looking good so far. The problem Im facing is the "No connection to google servers" error when I try to add my google account. There is no playstore and I tried to manually install it trhough .apk but again no luck. Have you guys managed to run the playstore with this new firmware?

install my gapps package trough cwm recovery.

How to repair hard bricked LG Bello 2 (LGX150)

In this thread I'll discuss how to unbrick hard bricked LGX150. After accidentally deleting key system app on my phone, I was left with dead device. Let this thread be a guide how to hopefully revive it; from installing fresh firmware to writing its IMEI to be able to connect to your mobile provider. ​
***Note that I'm am not responsible for any possible further damage you do to your phone! This method has worked on my phone. That's the only device I'm certain it works on. Furthermore, this firmware is only for LG Bello 2 (LGX150), so in no way try to use it on any device other than one mentioned!***​
Tools you are going to need are linked at the bottom.
Before we even start, you'll need to disable driver signature enforcement. Note that I'm using Windows 10. To do that, follow this simple guide. I'll be waiting...
Disabled? Great. Now, we are going to install MediaTek drivers. Open Device Manager and select to add legacy hardware in the action drop menu. We want to install it manually, so choose that option.
After clicking on next and "have disc", find the extracted driver folder location you've previously downloaded and choose:
MTK_Driver_ext>SP_Drivers_v1.6>cdc-acm.inf.
Select MediaTek DA USB VCOM. The prompt box will open where you'll click on "install anyway". Now, plug your phone in and right click on it in Device Manager. Choose "Update driver" and in the following list install driver MediaTek DA USB VCOM under MediaTek. That's it. You we have successfully installed the driver. Your phone should be listed in ports as "MediaTek DA USB VCOM (Port X)".
Awesome. Now for the more interesting part.
Download "SP tool.7z" and "LGX150-00-PIN-EUR-XXX-JUL-15-2015+0.user_3.zip", and extract them.
Run SP tool as an administrator, and in the download tab choose "MT6582_Android_scatter.txt" as an Scatter-loading file. If everything is okay, loaded files should now fill previously empty box. Okay, great! The moment of truth has come.
Press download button and reinsert your phone. Don't touch any button, either on the phone or computer. The bar at bottom should now change in color and flashing procedure should take place. Leave the room and return momentarily. Pray if religious.
Everything went smooth? The big green "okay" window has shown? If no, try different version of SP tools. If yes, remove the cable from phone, and battery as well. Wait for 15 seconds and reinsert it. Try to power the phone on.
Congratulations. For the next part, we'll rewrite its IMEI since it has been deleted, but more on that in a few days. You may want to check the post on how to root it here.
Credits go to the member on panduoduo.net named Ari*****e123, but I'm not sure whether the stars are because it's hidden or it is for real. Anyways, this is the link of the member. I can't thank her/him enough because this is the only firmware that actually worked, and we know how scarce options are for LGX150. If someone could show me how to donate to her/him, if possible, I'll gladly do so. Thank you, Ari*****e123.
Also, MediaTek developers for developing many, many great tools absolutely free of charge.
downloads:
MediaTek drivers
SP Tool
Firmware

Works perfectly, thanks. Could not find lg x150 firmware except here. Had to use similar firmware of x155 or x160.
Only found billions of links where people try to sell it for few bucks and offering file that requires password, but nowhere for free. Even that chinese you mentioned disappeared together with website. I am lucky to have found this thread.
The cause of my broken lg x150 was option in lucky patcher to remove all odex files, which broken all system apps, because they are special apps which unlike other apps do not have apk file with dex inside.
Just few observations:
- have to use spflashtool v5.1828 (5.1532 and 5.2036 do not work with this firmware)
- can root with kingoroot
- can replace root with supersu as in this guide https://forum.xda-developers.com/android/software-hacking/replace-kingoroot-supersu-manually-t3573361
- xposed framework works. just beware installing xposed after having some apps dex files linked via apps2sd will cause such apps to break, in that case just relink dex
- apps2sd works (except making ext4 primary 2nd partition on sd card, also enable su during boot and compatible namespace separation in supersu options, and enable addition of boot scripts before and after mount in apps2sd options and add this before:
Code:
su
setenforce 0
the new line after line setenforce 0 is vital for it to work properly, have to press enter key (new line) so that cursor is in new line, can check after reboot in terminal type getenforce and if it says permissive means that worked)
- can change imei via mtk engineering mode either via some apps or via code *#*#4636#*#* - cds information - radio information
- can't use uny custom recovery, boot, root, kitchen
- there are many guides for this in hovatek forum and in androidmtk website
- spflashtool 5.1532 is last version to work with nonencrypted flash files, so anybody may use that for readback (backup) of partitions and restore, for example I backed up rooted partitions, so no need to reroot or connect to internet for that ever again, no need to redo kingoroot rooting, just beware in start address you enter linear start address and partition size, not physical start address from scatter file! if system partition after readback can open via 7-zip means it is ok
- damaging imei, mac, calibration may require additional tools, but this can only happen if you format something via spflashtool or manually edit scatter file, so avoid that, see my problems: https://forum.hovatek.com/thread-21408.html

Chuwi hi9 Pro unlock, root, TWRP, etc.

If you dont have full ROM backup from your device or official ROM, dont do anything in terms of modding but to install vcom drivers (in my case they wont work without Virtual Serial Port Drivers) for bootloader, and adb/fastboot drivers, make sure theyre working, install Miracle Box / SPFlashTool (or similar ?) to be able to backup/flash your ROM/partitions from/to your device.
Check if it works for you (ie backup your ROM and try to flash something (cache) back.
Now when people are scared enough I want to tell you that it is almost impossible to kill (brick) your MTK phone, it happens mostly when people flash something that is not suppoused to be flashed (something from another device), the worst case if you flash wrong preloader or erase preloader but even after this there is a chance for resurrection. it takes time and efforts though.
++++++++++++++++++++++++++++++++++++
This is TWRP 3.2.2.0 recovery for Chuwi hi9 Pro.
Partitions available for backup:
boot, recovery, system, vendor, data (not incl. data/media = internal sd), cache and "para" (if you have got "recovery loop" - flash "para")
.img flashable - boot, recovery
look for detailed instructions for coomon things in other treads, like
- how to install bootloader vcom drivers and adb / fastboot drivers
- How to work with adb / fastboot command from your computer cmd window.
- how to use Miracle Box / SPFlashToll
This is detailed instruction how to make SPFlash backup out of your phone though Miracle Box does it in one click (well, almost)
- how to unlock bootloader (fastboot mode)
- how to use toilet paper (manual mode)
- how to install twrp recovery
- how to root
Unlock, Install, Root in one post
++++++++++++++++++++++++++++++++++++++
So, main point of this thread is TWRP, youll need:
- roll of toilet paper
- spflashtool backup (just in case)
- backup of your data (if you care) - your data will be erased during the process.
- unlocked bootloader
- twrp image
If something went wrong (highly unlikely), but "if".
Worst case scenerio: your phone will not boot into system / recovery
Solution: reflash (fastboot or flash tool): boot / recovery / system
Worst case scenerio: flash factory ROM (SPFlashTool)
Steps to do when you have all knowledge and all files ready.
IN YOUR CURRENT SYSTEM
In settings->System->About tablet -> click several times "build number" untill you see message "now you are developer"
In settings->System->Developer options: Enable USB debugging and OEM Unlock, connect cable
REBOOT INTO FASTBOOT
Power off, Power on holding "vol+"
Youll see black screen with 3 strings of menu (very small font):
- recovery
- fastboot
- system
use "vol+" for navigation, use "vol-" to confirm your choice (fastboot)
OR from your pc cmd window (shift+right click on adb folder -> choose "open command window here") type: adb reboot bootloader
press Enter
UNLOCK BOOTLOADER
on your pc (if cmd window is not ooened yet: shift+right click on adb folder -> choose "open command window here") type: fastboot oem unlock
press Enter
watch your phone and pc screen for messages
if you have vision problems, make sure you have a magnifying glass.
INSTALL TWRP
download hi9pro_twrp.img to your /adb folder
from the same cmd window type:
fastboot flash recovery hi9pro_twrp.img
*
Reboot into twrp and flash Magisk
*
Basically this is it
There is no command from fastboot to reboot into recovery (correct me)
You can power of, power on holding "vol+", choose "recovery" from menu
command to reboot into system: fastboot reboot
+++++++++++++++
* NEW *
Infect_Ed has posted TWRP recovery that he has compiled from source. DOWNLOAD FROM HERE
We don't know how to make twrp recovery work with encrypted data partition.
Read next paragraph if you are OK to trade security (encripred userdata) for functionality.
++++++++++
==========
In case you want to have your userdata decrypted (and full functional twrp), use following steps:
*** Please, note all userdata AND internal SD will be wiped during the process***
If you care
Save Internal SD card content to your ext.SD or computer
Make a Titanium backup of user apps (check Enable external data backup in Titanium settings)
If Titanium fails to write to your ext.SD than change Titanium backup folder location to int.SD
and after backup is done copy Titanium backup folder to ext.SD or PC.
Disable any passwords/pins from Settings->Security & Locations
(I know they are stored in /data/.. and will be erased anyway but just in case)
- Reboot into TWRP
- ftom TWRP -> Wipe ->Format userdata -> Confirm with "yes"
do not reboot into system
- flash encryption_prevener_hi9pro.zip to prevent system automatically encrypt userdata (it is used to insert modified fstab.mt6797 into vendor/etc)
- reboot system
- restore your int.SD content and apps
============
Link to official ROM/Firnware
*** Read this if you have Recovery Loop - no matter how you boot (buttons, from twrp recovery or from adb/fastboot shell) your device you always end up in TWRP recovery ***
- download 2018-09-29--para.zip
- unzip it - there is a folder 2018-09-29--para with 3 files inside
- connect your phone in twrp recovery mode to your computer
(you may need to turm "enable mtp" option in TWRP->mount)
- copy that folder into your sd card, the path is : TWRP/Backups/Hi9Pro
- click "Restore" (on the next screen make sure ExtSD is chosen as backup path)
- check checkbox "para", run restore, reboot
explanation: para is a partition contains last issued kernel reboot flag(command), like "reboot to recovery, reboot to system, etc." I think there is one flag that tells to kernel something like "reboot to recovery, do something untill its done", since this "something" never done, device reboots into recovery over and over again. This happend to me when I tried "factory reset" command from android settings, so android have sent my device into recovery mode where that "factory reset" command had to be performed but never done because its now not stock recovery but twrp.
**** If you have following problems:
Unknown Baseband -> Unknown IMEI -> NO sim card -> NO cell network
Look here first
****
***** If you came here from there.*****
and you are following their instructions, please, note, step 7. Unlock bootloader : DO NOT DO command "fastboot flashing unlock", just skip it.
Also, try to avoid "fastboot boot recovery.img" command to reboot into recovery (just use physical buttons for reboot). I'm not sure but something caused "recovery loop" in one case at least.
****** back-to-encr.zip if you want to encrypt your decrypted userdata (original fstab.mt6797 will be flashed, no data loss, you will not be able to mount userdata in TWRP, first boot may take long time due to encryption process - 10-60 min- depends how much data do you have)
******* twrp_recovery_chuwi-hi9pro_infectEd-XL is same Infect_Ed recovery adopted for our screen.

Hello. I made a mistake last week. I flashed accidently twrp with a scatter File from the HI9 Air through the spflashtool on the Hi9 Pro. Now it doesnt turn on etc. Is it hardbricked or can i still get it back to life?

No, its not complitely bricked if flash tool still recognizes your phone in bootloader mode. Most likely youve made same mistake I did. Depends of how you flashed that recovery - recovery only or full sisyem WITH new recovery. most likely you flashed only recovery partition. than, first, try to reflash backed recovery & next to recovery ("para") partition. in "download only mode" therell be an error "pmt has changed" than try "format & download" and "firmvare upgrade" - use scatter file contained only those two partitions. if you didnt make a backup ill put here that "para" partition and you can use hi9pro twrp img. in case this wont work, you may want to reflash the whole rom. We need to find factory rom image (from Chuwi or someone who did a back up prior he entered his credintals - thats another mistake Ive made Ive dumped a rom with all my logins information). if I have time I'll try "factory reset" to make a backup from "clean" system.
again, its almost impossible to brick mtk completely. even if flash tool doesnt recognize you phone (dead battery) there is a jump-pins method.
upd. Just looked @ Air scatter and found that Air recovery partition size is same as Pro (~16mb). now I dont know haw was that possible to overwrite next to recovery partition(s) and I think I used same Air img as you did and I've got size warning message when I flash it. anyway here is archive with scatter for recovery and para. just add twrp hi9 pro recovery (rename recovery.img to recovery.bin) and try to flash.

I didnt made a Backup (stupid me) i flashed the recovery file with a scatter file. When i plug the device in the pc the USB sound comes and its recognized as MEDIATEK USB PORT (COM8), but its removed automatic (USB Sound for disconnecting) The Screen stays black. So i have to wait for a Rom and a scatter File then?
---------- Post added at 19:50 ---------- Previous post was at 19:39 ----------
I tried your idea. I got an error Message: "Status Preloader Invalid" The Preloader File Format is invalid.

you know how to use flash tool , first you have to press "download" THAN connect usb cable.
but this is a good sign (pc recognize something), you may want to google for something like "unbrick mtk 6797 sp flash tool" for more info
this is archive w. 4 1st partitions (incl preloader)
Ive gotta go. Dont smash your tablet its 100% repairable, well 99.999%

thats how it looks
https://photos.app.goo.gl/9EK8vTwcTS3fDf1a7
---------- Post added at 20:21 ---------- Previous post was at 19:58 ----------
Still get an error Message for the PRELOADER. I read some Tutorials and dont find a Problem in my setup or my doing. Sucks :-/ But Thank you very much for your help

is it "MEDIATEK USB PORT (COM8)" appears for a second in the devices tree or "mediatek preloader usb vcom (android) (com8)"
if second, then everything is OK with the connection.
if its exactly MEDIATEK USB PORT (COM8) then there is something wrong
try to connect cable with diff buttons combination, i.e. "vol+" + connect cable .
try different "download agent" (DA_PL.bin ?)
Though I also used AllInOne_DA and flash tool V.5.1728
also, you might find Miracle Box Tool is easier to use
try "read" option first to backup your current rom
View attachment 4598709
I shoul ask this first:
- have you ulocked bootloader ?
- when your press "power" and "vol+" after some wait is anything appears on the screen
(boot menu: fastboot, recovery, regular boot) ?
- when your press "power" and "vol-" after some wait is anything appears on the screen
(chinese written) ?

Good Morning.
Bootloader is unlocked, no matter which key combinations ill try the screen stays black. When i have the usb cable at the PC (no matter which Port or cable) it the plugin - plugout sound plays every few seconds/minutes (not the same time in between). It is recognized as "MediaTek USB Port (COM4)" (different PC i tried). When ill try to install the vcom drivers i get the message that the best drivers are already installed and that are the mediatek usb port driver.
Image of the device manager: https://ibb.co/erkW6e
zelipukin said:
is it "MEDIATEK USB PORT (COM8)" appears for a second in the devices tree or "mediatek preloader usb vcom (android) (com8)"
if second, then everything is OK with the connection.
if its exactly MEDIATEK USB PORT (COM8) then there is something wrong
try to connect cable with diff buttons combination, i.e. "vol+" + connect cable .
try different "download agent" (DA_PL.bin ?)
Though I also used AllInOne_DA and flash tool V.5.1728
also, you might find Miracle Box Tool is easier to use
try "read" option first to backup your current rom
View attachment 4598709
I shoul ask this first:
- have you ulocked bootloader ?
- when your press "power" and "vol+" after some wait is anything appears on the screen
(boot menu: fastboot, recovery, regular boot) ?
- when your press "power" and "vol-" after some wait is anything appears on the screen
(chinese written) ?
Click to expand...
Click to collapse
---------- Post added at 07:34 ---------- Previous post was at 07:07 ----------
zelipukin i made a short Video about the behavior. The Device seems to activate when i push vol+ or power, but it looses connection when i stop holding the button or sometimes even when i hold the button.
https://drive.google.com/file/d/1m3YLrH5ZaVLttcSfDxx3RvL0DaXPcxzk/view?usp=sharing

...thinking
Just tried...seems like backups I made(and posted here) from Miracle Box is incompatible with SP Flash.
SP Flash doesn't like this and doesn't like that when tries to restore those backups but Miracle Box restores individual partitions or whole ROM w/o problem.
SP Flash is so inconvenient if you try to make a backup ... its also inconvenient when you try to restore.
Where did I get that Miracle Box for free ?
Let me figure out something...
....
This is something beyond my understanding but let me to describe what I did
- in SP Flash I choose scatter file and recovery.bin (like I sent to you)
- download only - no go
- download+format - no go
- firmware update - warning message about wrong partition size or something like this - Ignored - Flashed
- Bricked again (like yours - black screen - that's it)
- OK, I have several backups. Tried all of them - none of them works... except one
- Flashed that backup with SP Flash - no questions, no warnings, no errors - device came alive
- Flashed only recovery.bin - everything went fine
- Tried to find difference btw different backups - but couldn't find any
- So I tried to flash those files (to try 3.zip) several times and everything went OK, so this is 100% working backup.
Try it and see what happens, then we can go somewhere else. I still suspicious about those MTK Usb Com(8) instead of preloader usb. Also if you used "Firmware upgrade" option once, I beleive you'll need full ROM flash. Keep looking for it @ Needrom.com.
Strange things happen. Couple years ago I lost MTP connection with my MiMax. I tried everything possible but no luck - have to use UMS Enabler so I can read/write ExtSD at least, but MTP works with Chuwi.
I spent numerous hours trying to connect Chuwi in preloader mode until found that solution about Virtual Serial Port drivers.

Thanks for your help so far. Seems like my Device is half dead after 2 Hours of use

I'll tried to change the Drivers for the mediatek, it shows the device now with the preloader, but i think it doesnt work right. when i change the usb port it comes back as MediaTek USB Port (COM4). I made you a 15 Second Clip of the behavior.
https://drive.google.com/file/d/1m7wyIlIYJLN7ikmgUTzHBJtBdbZQrYaa/view?usp=sharing
Really weird. :-/
---------- Post added at 14:55 ---------- Previous post was at 14:40 ----------
and no chuwi hi9 pro rom at needrom yet. :-/

Sorry, haven't seen there is second page of this thread.
Saw a video where one guy showed how he changed drivers to right ones.
Main idea is in that short period of time when wrong drivers appear click right mouse button and choose "uninstall drivers"
after this in his video in next attempt system found usb vcomm by itself. worth to try
or other videos where guys catch a moment when this port appears in device tree but choose "update drivers"-> "browse my computer..."-> "let me pick from a list of device drivers" -> remove flag from "show only compatible.."->
I cleaned system, removed apps,accounts, etc. and made a backup of a "clean" ROM (well, almost). will put somewhere when/if I get good wifi somewhere (its 3GB.. w/o data partition) I'm on slow & limited mobile network.
but I don't think you need anything but recovery & para if you never used "format" & "firmware upgrade"

i think i used the upgrade one, after download only didnt work.
Ill tried the same method with changing drivers.
I will sit this one out, till you have uploaded the rom
Thanks for helping me out!
zelipukin said:
Sorry, haven't seen there is second page of this thread.
Saw a video where one guy showed how he changed drivers to right ones.
Main idea is in that short period of time when wrong drivers appear click right mouse button and choose "uninstall drivers"
after this in his video in next attempt system found usb vcomm by itself. worth to try
or other videos where guys catch a moment when this port appears in device tree but choose "update drivers"-> "browse my computer..."-> "let me pick from a list of device drivers" -> remove flag from "show only compatible.."->
I cleaned system, removed apps,accounts, etc. and made a backup of a "clean" ROM (well, almost). will put somewhere when/if I get good wifi somewhere (its 3GB.. w/o data partition) I'm on slow & limited mobile network.
but I don't think you need anything but recovery & para if you never used "format" & "firmware upgrade"
Click to expand...
Click to collapse

Just a few questions after using Hi9 Pro for about a week:
1) Where is the microphone ? Is it the small hole under the volume button ? (Strange position)
2) On the back side the two metallic stripes separating the plastic of the metal body are they something like antennas ? (LTE or WiFi or both ? )
3) What is the version of Bluetooth ? (4.0 or 4.1 or 4.2 ? )
4) Is it possible to use some kind of fast charging with a suitable charger or software app (firmware update) ?
MediaTek has a technology called "Pump Express" or something like that...
5) Do you have sudden, unexpected pop-ups of full screen advertisements while you are working with your tablet ?
How do we get rid of them ?
6) How do I find the LTE band the tablet is actually using while it's in use ?
I don't mean the table of supported bands, I mean the active band while using it.
Thanks!

1) looks like and its logical bc its close to mouth than if they put it in the bottom.
2) not sure, but most likely
3) according to this https://www.manilashaker.com/mediatek-helio-x10-vs-x20-vs-x30-chip-comparison-difference-specs/ its 4.2
4) too many different opinions, cant find the truth
5) none so far
6) you can try to find some info from mtk engineering mode *#*#3646633#*#* from you dialer
but its not intuitive and complicated

zelipukin said:
1) looks like and its logical bc its close to mouth than if they put it in the bottom.
Click to expand...
Click to collapse
Yes, it is a very small hole at the bottom right as you hold it, with a size of the edge of a needle!
zelipukin said:
1)3) according to this https://www.manilashaker.com/mediatek-helio-x10-vs-x20-vs-x30-chip-comparison-difference-specs/ its 4.2
Click to expand...
Click to collapse
Thank you.
zelipukin said:
5) none so far
Click to expand...
Click to collapse
But how did you do that ?
Did you add an Ad Block after rooting the tablet ?
The kind of ads I get, is more of suggested apps to install from Google Play.
It is literally bombarding me with an exhaustive rate.
I went to settings to "advertisements" of Google and it says that I can't turn it off.
Could it be some app that I installed that is spamming me this way ?
Can you suggest something to stop it ?
zelipukin said:
6) you can try to find some info from mtk engineering mode *#*#3646633#*#* from you dialer
but its not intuitive and complicated
Click to expand...
Click to collapse
I installed LTE Discovery and although I'm not rooted it seems that it works OK and it's showing me the bands.
The signal strength is lower than a mobile phone at the same position, same time, same provider.
Do you have an equal signal strength like your mobile phone ?
One more question:
7) Is it feasible for a developer to build a custom ROM for this device if he wants to or there are certain restrictions forbidding custom firmware ?
Is there any chance for a custom ROM in the future, because I don't think Chuwi will upgrade to 8.1 or better Android.
Thank you!

Regarding ads - I didn't do anything, I looked @ settings->google->ads and I can turn it on and then off w/o problem
Also I culdnt find any junk software so far, the phone came from GearBest factory sealed. I didn't do any system modifications except installing Magisk and modules - ExCard Access Enabler, init.d injector, Magisk SELinux Manager, ViperX (slightly better sound from speaker)
I didn't try the device as a phone, though it fit in a pocket of one of my jeans. I'd like to try but my current phone (miMax) has a micro sim.
7) Depends how popular is this device and who (developers) got it. Also, depends if this chipset is used in many other similar models (popular, prefferable) than you don't need to be a real "developer" to port ROM from a similar device and if you find that divice X is updated to 8.1 there is a chance someone will make a port (or you can try to do it yourself). I'm not a big fan of immediate upgrading to a newest version, for me they usually bring more limitations (you cannot let apps to modify files on your own sdcard f.e.) than benefits. I still use >2 y.o. andr. 6.0 custom rom on my MiMax.

zelipukin said:
Regarding ads - I didn't do anything, I looked @ settings->google->ads and I can turn it on and then off w/o problem
Also I culdnt find any junk software so far, the phone came from GearBest factory sealed.
Click to expand...
Click to collapse
Me too, I got a sealed and clean tablet from GearBest but If you look closer to that setting, it says that you can turn on or off the specialized ads for you, but you can't close ads completely.
For example, during web browsing do you see ads inside various sites ?
Or when opening apps on your tablet ?
I think we need an ad-blocker for this.
zelipukin said:
I didn't try the device as a phone, though it fit in a pocket of one of my jeans. I'd like to try but my current phone (miMax) has a micro sim.
Click to expand...
Click to collapse
I meant for mobile 4G data, not as a phone.
In my country we have three bands for LTE:
B3, B7, B20.
When the tablet rotates between 3 and 7, I have poor to zero signal.
But I saw with LTE Discovery that when it switched to 20 then the signal is very good.
So, with the help of MTK Engineering I disabled 3 and 7 bands and everything seems OK now.
I hope B20 to be used everywhere near to me.
zelipukin said:
7) Depends how popular is this device and who (developers) got it. Also, depends if this chipset is used in many other similar models (popular, prefferable) than you don't need to be a real "developer" to port ROM from a similar device and if you find that divice X is updated to 8.1 there is a chance someone will make a port (or you can try to do it yourself). I'm not a big fan of immediate upgrading to a newest version, for me they usually bring more limitations (you cannot let apps to modify files on your own sdcard f.e.) than benefits. I still use >2 y.o. andr. 6.0 custom rom on my MiMax.
Click to expand...
Click to collapse
I'm not familiar with Android internals so much, I am only using a Note II with TWRP and a custom 7.1.2 ROM and I'm missing some simple customizations not available with out Oreo 8.0 stock ROM.
I haven't even tried yet your first post regarding rooting and all the others because I'm not so sure where to find these tools and how to use them.
It could help a lot when you find some time to add more descriptions and links in your first post, if possible like Hi9 Air thread.
Thank you!

I dont know how and why, but I dont have any agressive advertisements. Checked Opera I'm using for webbrowsing - even "block popups" option wasn't checked. Had to download app yesterday (AutoNotification) from gp store and when I started it in a "free mode" there was a message like "to use this app in a free mode you have to agree to see ads", clicked "ok" , then message "downloading..." appeared...and nothing, no ads. I connect my tablet to the internet through my phone but dont think that matter.

Just a few more short questions:
8) Is there any other way to wake up the device instead of pressing the red button ?
For example double tap or maybe using the volume buttons or any other way.
Because I'm afraid of pressing the same button again and again.
9) Does this device have a WiFi 2x2 MIMO ?
I haven't found any particular info on this.
10) What is the kernel of the ROM ?
Is there any GUI compatible like Kernel Aiutor to make changes or take a look at info for the device ?
Thank you!