Hello All
I have a serious problem here.
Tried to flash custom ROM on the device using SP Flash Tool v5.1532 and apparently I used the wrong files which bricked the device, now I can't even turned it on....
PC recognize it as ADB device (VCOM drivers installed) but nothing more.
When the device is connected to its charger, I can only see a red dot at the top left side....
I found the right files (for sure...) and tried again to flash, the whole process went O.K but still can't turn on the device...and i know battery is full...
Please directing me to some info which might help me :fingers-crossed:
Best regards and thank you in advance.
Yariv
Hi,
Thanks for using XDA assist.
Unfortunately, I couldn't find a helpful thread that could have helped you out. However, I would suggest posting in the Android Q&A, Help & Troubleshooting forum as there is no dedicated forum for your device.
Good Luck! - gsstudios
Related
Hello guys, i need little help with my phone, so here is what happened: Two days ago i tried to turn on my phone, it started booting but the cycle repeated again and again so I got in recovery and wiped data/catche, but that didn`t helped. I thought that if i change the rom maybe I can fix the problem so I downloaded my rom from needrom (there were 2 roms for my device) and started flashing with Flash tool. I downloaded the first rom to my phone and tried to turn the phone on but nothing happened.. I downloaded the second rom and it worked, the phone booted but the only think that I can see is blank white screen, the touch is working and the buttons, when i click somewhere i feel the device vibrating but thats it. One time i managed to make the device appear in my computer as a normal android phone, dont know how this happened. So can someone help me please, if you have a phone like mine can you backup your rom and send it to me or help me find a working one, or some idea how to fix the blank screen. Thanks in advance
Hi,
I can't find anything relevant on XDA to help you, so you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Darth said:
Hi,
I can't find anything relevant on XDA to help you, so you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
Thank you for the help , I will.
Thank you. Thread closed.
Good day Sirs!
Please help me, yesterday i try to install PhilZ Touch.img using Flashify. installation went ok, but when ask to reboot, only shows acer's logo and after 5secs turn off, try Power + Vol up for recovery, shows the option for SD IMAGE, FASTBOOT, CLEAN. when i click any of that device will shutdown. tried also flash tools. but when i connect my device computer will start to recognize the tablet but after 2 seconds it will shutdown, flash tools will halt.
is anyone know how or what can i do to flash the tablet.
tablet: Acer Iconia B1A71
F/W : RV05RC05
JB 4.1.2
Thanks
Lhan13 said:
Good day Sirs!
Please help me, yesterday i try to install PhilZ Touch.img using Flashify. installation went ok, but when ask to reboot, only shows acer's logo and after 5secs turn off, try Power + Vol up for recovery, shows the option for SD IMAGE, FASTBOOT, CLEAN. when i click any of that device will shutdown. tried also flash tools. but when i connect my device computer will start to recognize the tablet but after 2 seconds it will shutdown, flash tools will halt.
is anyone know how or what can i do to flash the tablet.
tablet: Acer Iconia B1A71
F/W : RV05RC05
JB 4.1.2
Thanks
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
I'm sorry to hear about your trouble. We cannot provide technical support nor can other members reply to your posts here on XDA Assist and there is no forum specifically for the Acer Iconia B1 family at this time but I suggest that you ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!
Mike B. said:
Hello and thank you for using XDA Assist.
I'm sorry to hear about your trouble. We cannot provide technical support nor can other members reply to your posts here on XDA Assist and there is no forum specifically for the Acer Iconia B1 family at this time but I suggest that you ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!
Click to expand...
Click to collapse
Thank you Sir, for the quick response, i will try asking on the url provided. Thanks Sir.
Hey guys, I know that this must have been brought up again by others but no matter how I tried, I wasn't able to find a working solution. If there is already a link with a proposed solution, please post it as an answer so I can follow it.
Anyway, I messed up with my Lenovo A5500-H tablet and I absolutely screwed it...
I downloaded a firmware upgrade and changed the name of a boot.img.p file to boot.img, flashed it to my tablet, rebooted and, voila! It is now stuck in an endless rebooting... Recovery mode does not work and I can find no other working key combination (apart from Power+Volume up which brings me to the "Recovery Mode" / "Fastboot Mode" / "Normal Mode" selection-none of which works).
I have googled it A LOT and I have come to the conclusion that the only possible solution could be to make a bootable SD card, so as for the tablet to boot correctly.
What I am asking for is for the right bootable file / image for my Lenovo A5500-H tablet. Please help!
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!
Thanks!
Primokorn said:
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!
Click to expand...
Click to collapse
Thank you a ton! Already posted...! Hope it works...
Hi there.
First time posting, i'm needing assistance in finding a firmware that works for an Mpie phone, model number is Mpie-I9199 Plus. Been searching for a day or so, no luck so far. Or if anyone has a working one of these phones and is able to link me to a working firmware that would be great. I am able to use tools such as SP tools and MTK Droid tools and such, i'm just having trouble finding it, or alternatively a working preloader.bin for one. Customer done screwed up their phone and brought it to me, but all it is is a black screen, no boot, no powering on, no lights, until you plug it in without a battery, then you get a red light and hear the ding on the laptop. SP tools knows it's there but it gets a DRAM error when using the I9200+ files and the I9199 files.
Any help would be greatly appreciated
Update
Just an update, i used some Mpai-G9000 files and it actually allowed the phone to turn on, so i got a first step. Would using the firmware from the I9199 mixed with the preloader from the G9000 give me some functionality other than just turning on with a grey screen?
Hello and thank you for using XDA Assist,
please ask in this section:
Android Q&A, Help & Troubleshooting
The experts there will be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
I have a Coolpad F1 8297 (from Hong Kong) which is currently bricked. The problem is unique for me. Sometime back I had rooted my phone and installed custom Rom (something like ASOP don't remember exact name and probably it was for 8297w). The same was installed through TWRP recovery module. I am sorry but I must say that I was playing around with TWRP options and through mistake I deleted something and since that day my phone remained in boot-loop. I can only see the Chinese script & F1 displayed on the screen when I push the power button. I also cannot enter TWRP recovery. I tried to connect to the PC but even then it would not connect. I have installed all necessary drivers etc. Tried changing ports, cables and everything that I found on the net. When I attach the device to PC it connects and disconnects and this goes on endlessly. Please therefore help me getting a fix for my phone. Thanks.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist