[ROM] [DISCONTINUED] Cyanogenmod 12.1 - Lenovo A7000-a [MT6752] [aio_row] - Miscellaneous Android Development

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I or any other contributor are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for CyanogenMod is available in the CyanogenMod Github repo.
And if you would like to contribute to CyanogenMod, please visit Gerrit Code Review.
IMPORTANT INFORMATIONS
We will not support users and answer questions from users which:
have flashed mods
modified system files
didn't follow our instructions word by word
are unfriendly
INSTRUCTIONS
Installing CyanogenMod 12.1 on your Lenovo A7000-a or coming from another ROM:
Flash a custom recovery via SPFT (any other installing methods will do, just make sure you have TWRP recovery installed) From my tests, only valid signed zips can be successfully installed, so please do not try to modify the zip yourself.
Push Slim GApps (arm64) and the CM 12.1 zip to your device
Boot into Recovery
Perform factory reset
Flash the CM 12.1 zip from SD card
Flash GApps for 5.1.x from SD card
Reboot (be patient, "optimizing apps" takes a while)
Don't restore system data using Titanium Backup! ( Restoring Apps + Data might cause problems and is not recommended, avoid it if possible! )
DOWNLOADS
Lastest Release (2016-01-28)[1% battery bug - will be fixed in few time] : https://drive.google.com/file/d/0B__FXU5sYM3QVjE5QjZiYWRhYkk/view?usp=sharing
OLD (2015-12-20): https://drive.google.com/file/d/0B__FXU5sYM3QMWw3cnNvbWE2N0k/view
Lastest TeamWin Recovery Release : http://d-h.st/Wfaj
-----------------------------------------------------------------------------
Google Apps (arm64): wiki.cyanogenmod.org/w/gapps
BUGS
Report bugs for builds below the thread. Please keep in mind that bugs are expected on these builds.
Current status:
Builds: STABLE
Known issues: Notification LED color can't be changed manually.
FAQ
ROOT! ROOT! Give me root or i'll die!!! Where root is???
First of all do not flash any supersu/superuser/superman zip package to get root. Go to Settings>Developement Settings>Root acces > Apps Only
Are these gapps <insert random gapps package here> working with cm12.1?
Use the suggested package
When do I have to wipe data?
You must wipe data only when you're switching from another rom or migrating to Snapshot branch from Nightly and vice versa. You don't need to wipe data when you update in the same release channel.
Why no <insert miui feature here>?
Because this is CyanogenMod
XDA:DevDB Information
Cyanogenmod for Lenovo A7000-a, ROM for all devices (see above for details)
Contributors
Rohan Taneja, lokjianming, nofearnohappy, ibule, nobita iful
Source Code: https://github.com/RohanTaneja/android_device_lenovo_a7000
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP 2.8.7.4
Version Information
Status: Stable
Stable Release Date: 2016-01-28
Created 2015-12-21
Last Updated 2015-01-28

CHANGELOG:
Code:
[B]2016-01-28[/B]
[LIST]
[*]Repo sync to LMY49F
[*]Fixed App2SD issues
[*]Added complete MT6752 specific codes
[*]Used Stock RIL by lenovo
[/LIST]
[B]2015-12-20[/B]
[LIST]
[*]LMY48Y repo
[*]Based on Redmi Note 2's device tree
[*]Added A7000-a's binaries
[*]A lot more....
[/LIST]

found this post after a year! thank you very much very good job
*I dont know if it is a bug,but i cant sync to google(actually theres no tab to select like "contacts,gmail,celedar etc)
also great job

Wow!! Finally!! Been waiting for a cm rom for our a7000.
Looking forward for improvements.
Thanks a lot man.
Guys, let's support him.
Sent from my Lenovo A7000-a using XDA Free mobile app

Screenshots would be useful
Thanks for giving LIFE to our A7000 and I hope it comes out of Beta soon

testing it......will give detailed review i a little while.......

bladehunter said:
testing it......will give detailed review i a little while.......
Click to expand...
Click to collapse
After using it for 24 hrs...
Rom is simply amazing......
Very smooth.....
As for the bugs....
1) Recent screen is a bit laggy...
2) On trying to use link2sd to convert integrate update into system google play services went AWOL......
3) Would love if its possible to get super su.......(I prefer it )
4) Battery backup is horrible....... Only 4 hrs (on 2G)
Would get at least 20 hrs on stock s152......
Will update it more.......

bladehunter said:
After using it for 24 hrs...
Rom is simply amazing......
Very smooth.....
As for the bugs....
1) Recent screen is a bit laggy...
2) On trying to use link2sd to convert integrate update into system google play services went AWOL......
3) Would love if its possible to get super su.......(I prefer it )
4) Battery backup is horrible....... Only 4 hrs (on 2G)
Would get at least 20 hrs on stock s152......
Will update it more.......
Click to expand...
Click to collapse
Thanks for that, man.! Gotta try it soon.
Sent from my Lenovo A7000-a using XDA Free mobile app

Joel Asignar said:
Thanks for that, man.! Gotta try it soon.
Sent from my Lenovo A7000-a using XDA Free mobile app
Click to expand...
Click to collapse
i am back to s153........won't be able to update it any time but a final warning u won't be able to last long on this rom as u cant set default storage to SD card.......xinternalSD is a temporary fix but does not last long

bladehunter said:
i am back to s153........won't be able to update it any time but a final warning u won't be able to last long on this rom as u cant set default storage to SD card.......xinternalSD is a temporary fix but does not last long
Click to expand...
Click to collapse
How you reverted to s153 ??

something wrong with screen
Hello
I have installed this ROM.... And after sometime like 2-3hrs the screen is going black... Don't know what is the problem....
I thought it might be my phone problem.....
So I. Did factory reset cleared caches n dalvik caches n tried again to install this ROM .. But I got the same issue...
So got back to original stock ROM s153 n I'm not getting screen black issue...
N I have tried installing aosp ROM also don't get any screen black issue....
So plzz help what might b the issue
And in this cm12.1 ROM can't sync google account... Like contactsgmail drive etc ect

Omj12393 said:
How you reverted to s153 ??
Click to expand...
Click to collapse
i had a nandroid bakup.......!!!!!!
but u can flash the stock rom of s153........
hear is the link - http://forum.xda-developers.com/chef-central/android/stock-firmware-lenovo-a7000-t3205521

to install gaps corectly, install rom turn off the gps THEN install gaps from recovery

Guys., any updates/progress yet?
Sent from my Lenovo A7000-a using XDA Free mobile app

guys this is a cm12.1 bug...
goldynaidu said:
Hello
I have installed this ROM.... And after sometime like 2-3hrs the screen is going black... Don't know what is the problem....
I thought it might be my phone problem.....
So I. Did factory reset cleared caches n dalvik caches n tried again to install this ROM .. But I got the same issue...
So got back to original stock ROM s153 n I'm not getting screen black issue...
N I have tried installing aosp ROM also don't get any screen black issue....
So plzz help what might b the issue
And in this cm12.1 ROM can't sync google account... Like contactsgmail drive etc ect
Click to expand...
Click to collapse
edit - found a fix
should keep brightness at 25% or above

Guys.. Go to brightness settings and turn off adaptive brightness. Now screen black issue is not there.. And also.. Anyone confirm that GPS is working I said #onlyGPS not high accuracy.. If GPS only works... Plz tell me... Fast...

Is the GPS workjnh?... And is the Google apps working perfectly?.. Anyone reply please.. The op is not replying

Arvind Balaji said:
Is the GPS workjnh?... And is the Google apps working perfectly?.. Anyone reply please.. The op is not replying
Click to expand...
Click to collapse
Sorry about not replying, kinda off these days.
Gapps are tested working try Slim or OpenGapps (arm64)
I will be releasing a CM build in the end of this month, after getting relieved from Practicals.

Rohan Taneja said:
Sorry about not replying, kinda off these days.
Gapps are tested working try Slim or OpenGapps (arm64)
I will be releasing a CM build in the end of this month, after getting relieved from Practicals.
Click to expand...
Click to collapse
K thanks... The problem now is... When I grant root permission to resolution changer app.. The phone reboots.. I granted always.. So bootloop... Then reflashed and denied root permission for it.. Typed desired resolution and then granted it permission only for once.. So it will ask for next time.. So the resolution changed and rebooted.. Then.plz fix it... I don't want my phone to reboot.. Plz look into this ****..
And good luck for the practicals.. Sorry for bothering!!!??????

Been using the rom for a couple of days and it's very satisfying already even with it's beta state. Good work @Rohan Taneja. Thanks a lot. Works almost perfect. I'll try to look for some bugs and see if I can provide a logcat.

Related

[UNOFFICIAL][AOSP][5.1.1] VanirAOSP Lollipop 5.1.1 R1 i9105/p RELEASED

VanirAOSP is a project coded by professional level developers and supported by the open source community that focus on bringing in improved versions of common features and improvements found in open source while focusing on writing new improvements and original coding with the highest standards
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
To Enable Alarm:
1. you can try going in sound setting, turn off and then on the link ringtone & notification vol. setting
2. go in the interruptions menu and turn off and then turn on the event & reminders setting
when it did not work for me, I performed these steps and after it worked. special thanks to @cappoccia for steps
CHANGES LOG
01/24/2015: compiled and booted without problems.
01/25/2015: released as initial build.
01/26/2015: read how to fix Superuser issue to run all application that required root.
01/30/2015: compile and upload the exodus for both i9105p.
04/01/2015:download VanirAOSP 5.1 source code.
04/05/2015:recompile it many times and got rom worked fine.
05/10/2015: updated to Android 5.1.1 R1 and everything works fine.
Click to expand...
Click to collapse
DOWNLOADS:
click here to download it.
10/05/2015: click here.
-Use 5.1's GAPPS.
Working:
Calls and data.
Audio (Playback & Recording).
Video (Playback & Recording).
Playback .
recording audio and video.
Mic.
Bluetooth.
Wifi.
AOSP Keyboard.
CM Theme Chooser.
All Display & Lights features (check the screenshot).
Vanir's options.
Not working
I didn't fetch any critical bug or features missed or doesn't working.
Instalaltion
Download rom, gapps then ChaiFire SuperSu then put into sdcard.
Reboot into twrp recovery.
Choose Wipe and select cache, system, data and swap to wipe.
Click on Install and add rom then select the gapps then add ChainFire root with the latest version that's compatible with Android Lollipop 5.0.2 that you can download from attacched files.
Install the packages, reboot.
Wait a few seconds to update the apps.
Enjoy
Click to expand...
Click to collapse
How To Install Root on 5.1:
Download UPDATE-SuperSU-v2.46.zip and copy to sdcard from attacched file.
Reboot into TWRP Recovery.
Click on Install.
Choose UPDATE-SuperSU-v2.46.zip.
Swipe to start flashing.
Reboot and install SuperSu's Chainfire application and run the script to
complete installation.
Click to expand...
Click to collapse
Installation Guide of i9105:
Take same rom.
extract updater-script in meta-inf and rename all s2vep to s2ve.
remove old updater-script and replace edited one.
Flash the rom then NFC Destroyer, enjoy.
Click to expand...
Click to collapse
Contributors
@haky86
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-01-04
Last Updated 2015-05-10
Reserved
Good to see that S2 plus's development has got a great pace.
Keep doing great work guys. :good:
Good job keep it up.
Very nice rom , no lagging , and batery life is nice ^^
naskodeuces said:
Very nice rom , no lagging , and batery life is nice ^^
Click to expand...
Click to collapse
so no lagging like CM12?sound good, that's why i love AOSP based roms instead of CM. more roms will be available next days
haky 86 said:
so no lagging like CM12?sound good, that's why i love AOSP based roms instead of CM. more roms will be available next days
Click to expand...
Click to collapse
Good work... What is exodus? Waiting for it and what is the roms that we can expect?
Good job Hakam!
cracker12 said:
Good work... What is exodus? Waiting for it and what is the roms that we can expect?
Click to expand...
Click to collapse
exodus have exodus panel and based on pure source and may have the stock launcher.
haky 86 said:
so no lagging like CM12?sound good, that's why i love AOSP based roms instead of CM. more roms will be available next days
Click to expand...
Click to collapse
No , for me not , it is really smooth, no problem with sound like in RR , or wifi problems , like i said battery is awesome , it was 100% at 6:00, and now is 63% ( 14:34) and my wifi is on all the time + music, whatsapp and facebook ?? Good work keep it up ??
naskodeuces said:
No , for me not , it is really smooth, no problem with sound like in RR , or wifi problems , like i said battery is awesome , it was 100% at 6:00, and now is 63% ( 14:34) and my wifi is on all the time + music, whatsapp and facebook Good work keep it up
Click to expand...
Click to collapse
is data connection works?
haky 86 said:
is data connection works?
Click to expand...
Click to collapse
Like a charm
naskodeuces said:
Like a charm
Click to expand...
Click to collapse
strange someone told me stop after switching to wifi any way, since you say is work, i can stay in peace xD, u tesed on i9105 or P?i need confirm for booting on i9105 guys.
haky 86 said:
strange someone told me stop after switching to wifi any way, since you say is work, i can stay in peace xD, u tesed on i9105 or P?i need confirm for booting on i9105 guys.
Click to expand...
Click to collapse
For me it is working , i tested it on P
Try to disable it a while then turn it back on
, lemme know if its still work
naskodeuces said:
No , for me not , it is really smooth, no problem with sound like in RR , or wifi problems , like i said battery is awesome , it was 100% at 6:00, and now is 63% ( 14:34) and my wifi is on all the time + music, whatsapp and facebook ?? Good work keep it up ??
Click to expand...
Click to collapse
What about the music in bluetooth headset is it have bug like rr ???
SH1M4BD3 said:
Try to disable it a while then turn it back on
, lemme know if its still work
Click to expand...
Click to collapse
Pls answer my qouestion in RR thread ?
---------- Post added at 05:36 PM ---------- Previous post was at 05:35 PM ----------
BECKHAM 7 said:
What about the music in bluetooth headset is it have bug like rr ???
Click to expand...
Click to collapse
Sry i dont have any Bluetooth headset :/
strange. data did not work for me.
i got 1905p. I check apn and it is ok but still no data connection.
Guys, flash Nebula kernel and test after.
guys about bugs i said are same of cm12
Sent from my VanirAOSP 5.0.2 GT-I9105P using XDA Free mobile app

[ROM][UNOFFICIAL] CyanogenMod 12.1 Nightlies / Releases [EOL]

#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
General:
These are UNOFFICIAL CM12.1 Lollipop Nightlies brought to you by Open Desire Project and TeamCodefire as a continuum to CM10, 10.1, 11.0 and 12.0 builds. Builds are generated automatically on daily basis. Process starts around 00:30 PST/PDT. If it fails, then there will be no build until the reason for failure is taken care of which can take time. Last 7 nightlies will be kept on the server. If you want a longer history of them, you are free to archive them yourself.
Thanks and credits:
Andromadus
CodeAuroraForum
CyanogenMod
BananaGranola
Epic Beard Men
eXistZ
Flemmard
Flinny
goo.im
Juansheng
paulb_nl
randomblame
synergye
kylon
TeamCodefire (for build server and hosting, priceless)
All the rest that have helped to construct these builds and develop software for ace directly or indirectly in the past.
Githubs:
CyanogenMod
Open Desire Project
Changelogs:
CM Gerrit
CM Google+
Github (see above)
Installation instructions:
Download Nightlies / Releases
Download gapps from here
Put the files on SD card
Reboot to recovery
Do factory reset (ie. format /system, /data, /cache, /sd-ext and /sdcard/.android_secure)
Flash cm-12.1-YYYYMMDD-UNOFFICIAL-ace.zip
Flash gapps zip
Remember to flash boot.img via fastboot if you have S-ON
Reboot and enjoy
Update instructions:
Download Nightlies / Releases
Put the file on SD card
Reboot to recovery
Flash cm-12.1-YYYYMMDD-UNOFFICIAL-ace.zip
Remember to reflash boot.img via fastboot if you have S-ON
No need to flash gapps as CM backuptool script should take care of them (results may vary depending on which gapps package you are using)
Reboot and enjoy
InspireMod
codefi.re
Kernel
Source: github
Compiler: stock AOSP gcc-4.8
Branch: cm-12.1
Kernel Version: 3.0.101
defconfig: ace_defconfig
Contact:
My Google+ (I don't accept Hangouts invitations though, use IRC if you need something that requires direct chat.)
My twitter
#opendesireproject @ freenode
Donations:
For build server & hosting: codefi.re (use the donation button)
I don't really need your money right now but if you insist on donating to me I suggest you donate that money to EFF instead here: https://supporters.eff.org/donate
XDA:DevDB Information
[UNOFFICIAL] CyanogenMod 12.1 Nightlies / Releases [EOL], ROM for the HTC Desire HD
Contributors
Mustaavalkosta, paulb_nl, kylon, Phantom Shadow
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Created 2015-04-02
Last Updated 2018-10-05
Reserved
CM12.1
CM12.1 is finally here with us...
Cant Wait ...
Happy Flashing...
First build is now on the mirrors. Expect everything to be broken, be thankful for anything that works. OTA updater app is not included as backend needs some work to support multiple versions thus I'll probably kick myself to finally finish the rewrite of the backend code. There's no schedule for these nightlies yet as I haven't really had time to think how I'll juggle 3 different versions so they don't start compiling at the same time. New builds will come as DOGE builds did for the previous version meaning whenever I feel like making one until things settle down a bit and build schedule is decided.
Bugzilla has 12.1 specific product now so you can use that for bug reports.
Thank you so much for your TITANIC labor!
Thank you so much, Musta, for your TITANIC labor!!! :good:
In "Desire HD Android Development" you're a real Legendary Developer!
Only thanks to you, our "older" is still alive :fingers-crossed:
Where you only have enough time for everything
Thank you SO MUCH again!
after installing the ROM I have a message saying I have not enough space on the system (should get at least 250 mb free)
However I have been able to flash the Gapps smoothly
After flashing Gapps, the message persists and I can not install anything (neither from the playstore or from an apk)
On the other hand, everything seems to work (wifi,sound,camera,...)
pascuals said:
after installing the ROM I have a message saying I have not enough space on the system (should get at least 250 mb free)
However I have been able to flash the Gapps smoothly
After flashing Gapps, the message persists and I can not install anything (neither from the playstore or from an apk)
On the other hand, everything seems to work (wifi,sound,camera,...)
Click to expand...
Click to collapse
same problem here, the other seems to work well but with a bit of lag, thanks for the effort
Thank you all for keeping our device not only up to date but keeping it to the newest available software!
An old question: is it possible to update (dirty flash) from cm12 to this? Maybe musta can add this to faq so I will be the only one who asks
Vega Bullet said:
Thank you all for keeping our device not only up to date but keeping it to the newest available software!
An old question: is it possible to update (dirty flash) from cm12 to this? Maybe musta can add this to faq so I will be the only one who asks
Click to expand...
Click to collapse
i did dirty flash and get youtube error, and after i removed it any google error (google service i think) so this is not good. but maybe after any update it will be good...? after that i did clean flash, and get error as writed before, and not working keyboard.so I'm back.
Sent from my Desire HD using xda premium
Vega Bullet said:
Thank you all for keeping our device not only up to date but keeping it to the newest available software!
An old question: is it possible to update (dirty flash) from cm12 to this? Maybe musta can add this to faq so I will be the only one who asks
Click to expand...
Click to collapse
With major version upgrades dirty flashing is just anybody's guess whether it will work. At least upgrade your gapps while you are at it and you may have more luck with it.
As always, many thanks to Mustavaalkosta and all others devs involved in this project!
You keep this nice device alive! :good:
Can't wait to try... See you soon for the feedback. Thank you again!
pascuals said:
after installing the ROM I have a message saying I have not enough space on the system (should get at least 250 mb free)
However I have been able to flash the Gapps smoothly
After flashing Gapps, the message persists and I can not install anything (neither from the playstore or from an apk)
On the other hand, everything seems to work (wifi,sound,camera,...)
Click to expand...
Click to collapse
Same here on an Inspire 4G. Very slow install, even considering ART. Reboots take about 5 minutes.
NanoWeber
NonoWeber said:
Same here on an Inspire 4G. Very slow install, even considering ART. Reboots take about 5 minutes.
NanoWeber
Click to expand...
Click to collapse
I think the problem is with my Inspire 4g and not the ROM. While trying Advanced wipe, I get:
E:Block device not present, cannot wipe SD-ext.
E:Unable to wipe /sd-ext.
I've made a pigs ear of the install somewhere along the line. Yawn.
NanoWeber
how to update from cm12 to cm12.1
dear bro
i download 5th April nightly,
shall i use update from ota? or
start in recovery flash as u said n install ROM and Gapps? plz specify which gapps is support this rom cm12.1 bcoz there is list of gapps over there.
plz guide
aasifnasim said:
dear bro
i download 5th April nightly,
shall i use update from ota? or
start in recovery flash as u said n install ROM and Gapps? plz specify which gapps is support this rom cm12.1 bcoz there is list of gapps over there.
plz guide
Click to expand...
Click to collapse
Android 5.1 Gapps:
https://www.androidfilehost.com/?fid=95916177934550505
H
aasifnasim said:
dear bro
i download 5th April nightly,
shall i use update from ota? or
start in recovery flash as u said n install ROM and Gapps? plz specify which gapps is support this rom cm12.1 bcoz there is list of gapps over there.
plz guide
Click to expand...
Click to collapse
Full wipe every flash, don't update. This is an early beta release and there are likely to be big changes which might break things under the hood.
I think a lot of users are starting to get confused between the CM12 and CM12.1 releases.
Hello
indeed I am confused too. Is the 12 nightlies project abandoned/replaced by 12.1 ?
I am using a CyanogenMod 12 Nightlies rom . Anyone can explain me what's better in CyanogenMod 12.1 Nightlies ?
As I can see the Kernel is the same , what's new in 12.1 compared with 12 ? Any valid reason to move from 12 to 12.1 ?
Thank you!
aand ...BTW THANKS for the continuos work to leave alive HTC Desire HD !!!
NonoWeber said:
I think the problem is with my Inspire 4g and not the ROM. While trying Advanced wipe, I get:
E:Block device not present, cannot wipe SD-ext.
E:Unable to wipe /sd-ext.
Click to expand...
Click to collapse
sd-ext is not present unless you've partitioned sdcard, so don't worry if you get only that error message
graziano68 said:
Is the 12 nightlies project abandoned/replaced by 12.1 ?
Click to expand...
Click to collapse
Well, probably not abandoned but focus will shift to 12.1. I haven't made any decisions yet but it's likely 12 will move to weekly schedule or something similar.
graziano68 said:
I am using a CyanogenMod 12 Nightlies rom . Anyone can explain me what's better in CyanogenMod 12.1 Nightlies ?
As I can see the Kernel is the same , what's new in 12.1 compared with 12 ? Any valid reason to move from 12 to 12.1 ?
Click to expand...
Click to collapse
What's better? At the moment probably nothing as things are just starting to come together and many things are still shoddy at best. There are not even official nightlies out yet.
You can check the full 5.0.2 -> 5.1.0 changelog here. There are some 14 000 changes.
Matt_85 said:
sd-ext is not present unless you've partitioned sdcard, so don't worry if you get only that error message
Click to expand...
Click to collapse
Thanks. I thought I'd finally bricked my phone after all these years of flashing.
NanoWeber

[ROM][5.1.1][I9305][UNOFFICIAL][BETA2][20150508] CyanogenOS 12.1S

CyanogenOS 12.1S UnOfficial Rom for i9305[/CENTER]
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
About CM:
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important Information:
1.This is an unofficial rom ! It is not developped by OnePlus or Cyanogen Inc
2.This is still in beta version ! So you may find bugs ! I might need help from devs to fix them as I am a little dev
3.Updates wont be that fast ! My connection is so slow
4.This rom includes all OnePlus and Cyanogen Inc apps including Hexo Theme
5.for variety of choises I put CyanogenOS and CYanogenMod apps!You may find two icons of the same app but different versions
6.I need testersssss
Bugs(that I found,if you found any new one tell me)
1.Flashing will take a long time
2.In first boot,after some minutes , bootanimation will disappear and a black screen comes for 2 or 3 secs!Dont be afraid
3.If you get unknown baseband flash another modem from here http://sourceforge.net/projects/amchaprojekt/files/Modems/
4.tell me I am sure there are more
5.custom kernels might not work I tested agni v2.9.1 and I got a black screen
Download:
Beta 2 (stable build ) release : uploading now ...
I built beta 2 but I need testers.It might not even flash or boot so I need testers and reports
Change log (not confirmed ! until testing)
Baseband fixed
CM sources updates
Bug fixes
Added more tweaks and optimizations
...
Beta 1 20150501 release https://mega.co.nz/#!VRkSCRYJ!Hh8LZHpx_vKpOrxMEAJWCMwVCM4IUxVnUucv41ipNIk
Installation:
Copy GApps and CyanogenOS ZIPs to your SDCard
Boot into Recovery
wipe data factory reset
wipe cache
wipe dalvic cache
format system
Flash CyanogenOS zip from SDCard
Flash GApps zip from SDCard
Reboot
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 12.1:
Copy CyanogenOS ZIP to your SDCard
Boot into Recovery
Flash CyanogenOS zip from SDCard
Reboot
ScreenShots
see next post
Credits
@winxuser I used your boot.img file (sorry I didnt ask permission first)
@Amcha team
@OnePlus
@Cyanogen Inc.
...
XDA:DevDB Information
CyanogenOS 12.1S, ROM for the Samsung Galaxy S III I9300
Contributors
achrafi9305
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: v2
Beta Release Date: 2015-05-08
Created 2015-05-02
Last Updated 2015-05-08​
Screenshots
see attachements
Are there any important differences to normal CM?
dawidd6 said:
Are there any important differences to normal CM?
Click to expand...
Click to collapse
basicly it is the same but this one seems the same as official CyanogenOS in OnePlusOne maybe there are many additions specially the apps and hexo theme...
Beta 1 uploaded
https://mega.co.nz/#!VRkSCRYJ!Hh8LZHpx_vKpOrxMEAJWCMwVCM4IUxVnUucv41ipNIk
I need testers !
You do not quit just like the previous?
It promises to be fun ...
krakowiak84 said:
You do not quit just like the previous?
It promises to be fun ...
Click to expand...
Click to collapse
previously I got problems finishing builds!
but now I got it successfully now ! but the build might contain many problems ! we need to fix them together
achrafi9305 said:
previously I got problems finishing builds!
but now I got it successfully now ! but the build might contain many problems ! we need to fix them together
Click to expand...
Click to collapse
In the evening, I check what works and what does not ...
Screen looks cute with the camera
What kernel will work?
krakowiak84 said:
In the evening, I check what works and what does not ...
Screen looks cute with the camera
What kernel will work?
Click to expand...
Click to collapse
I am not sure about kernels ! Agni 2.9.1 didnt work for me ! try latest agni.
achrafi9305 said:
I am not sure about kernels ! Agni 2.9.1 didnt work for me ! try latest agni.
Click to expand...
Click to collapse
OK I download and test
The installation went normally.
Does not read sim card ..
GSM network does not work
New camera and gallery nicely presented
OK thanks for testing!
I finished beta 2 build with fixed baseband ( I hope so I need someone to tell me if it is fixed or not) I am uploading it now
Don't you own this device? Do you have your sources on github?
rodman01 said:
Don't you own this device? Do you have your sources on github?
Click to expand...
Click to collapse
I own this device but I use it so much at work so I need it to be stable !
Sorry I cnat upload sources to github simply because my internet is so slow (even uploading the rom file takes long time)
New Rom is coming!
In addition to this rom,I am trying to get temasek unofficial cm12.1 rom as well
achrafi9305 said:
In addition to this rom,I am trying to get temasek unofficial cm12.1 rom as well
Click to expand...
Click to collapse
That would be awesome, Temasek's rom was one of the best for s3 :good:
dark'em said:
That would be awesome, Temasek's rom was one of the best for s3 :good:
Click to expand...
Click to collapse
lets hope I can build it ! I got a first build but it gave me a flashing error! I ll try to figure it out
Can someone testing the rom please tell me if you try to add a wifi point with EAP security, does the SIM option appear in eap method?
The installation went normal.
Appstore and stuff worked.
Bugs i found before switching back:
When someone called me, i couldnt accept nor deny the call i could only send a generic sms.
This would not have been so bad, but the Phone did not stop ringing only a restart of the Device could fix it.
The other Bug i've found.
I am an Ingress Player so i was bad that the GPS did not work (properly/at all)
The app showed me for 10 secounds in the wrong Position 300M away and then went off completely.
So i hope that helped
Keep up the good work.
Max
Incom1ng said:
The installation went normal.
Appstore and stuff worked.
Bugs i found before switching back:
When someone called me, i couldnt accept nor deny the call i could only send a generic sms.
This would not have been so bad, but the Phone did not stop ringing only a restart of the Device could fix it.
The other Bug i've found.
I am an Ingress Player so i was bad that the GPS did not work (properly/at all)
The app showed me for 10 secounds in the wrong Position 300M away and then went off completely.
So i hope that helped
Keep up the good work.
Max
Click to expand...
Click to collapse
GPS errors are quite regular on 5.1 it's common to all cm based rom as the call error, i have it on cm12 nightly

[6.0.x|SM-T520|BETA] Unofficial CyanogenMod 13.0 for the Tab Pro 10.1 (picassowifi)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review.
Downloads
Use Latest TWRP When Flashing
5/17 Build
https://www.androidfilehost.com/?fid=24545070682210625
Instructions
Install Latest TWRP Recovery
Wipe Everything (Factory Reset)
Install ROM
Install GApps (optional)
Reboot
Profit
Google Apps
OpenGapps: http://opengapps.org (use an ARM, 6.0 zip)
NOTE: Be sure you flash the gapps package with your rom before you boot up the first time.
Sources
Device: https://github.com/awid777/android_device_samsung_picassowifi
Kernel: https://github.com/awid777/android_kernel_samsung_picassowifi
Known Issues
Camera does not work (Along with the torch)
I'm sure there's more - Post here if you find any
XDA:DevDB Information
Unofficial Cyanogenmod 13 for the Galaxy Tab Pro 10.1 (picassowifi), ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
awidawad, crpalmer, shevt
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 3
Beta Release Date: 2016-05-17
Created 2016-05-05
Last Updated 2016-05-17
Before You Post a Bug
PLEASE include steps to reproduce the bug, and a logcat would be nice. If it's hardware related or your device reboots please post your last_kmsg.
How to logcat?
See here (read up to the end of the "logcat" section).
Upload it to a pastebin, include the link in your bug report.
or if you're on your phone and can't get to a computer:
If you install a terminal (this one works nicely) and type this:
Code:
su
then, accept the superuser prompt, and type
Code:
logcat -d > /sdcard/logcat.txt
it should save a logcat at /sdcard/logcat.txt. You can change the filename, and it will overwrite whatever exists already at /sdcard/logcat.txt
How to get last_kmsg?
Copy /proc/last_kmsg and upload the file contents to a pastebin, include the link to that in your bug report
Please feel free to ask questions pertaining to this rom and post bugs or any issues you may run into. Any help/contributions would also be appreciated as my free time is limited.
DEVICE CHANGELOG
Code:
17MAY16
*Fixed SD Card
*Kanged Tab S blobs (WIP)
*Cleaned up minor bugs
*Enabled auto power modes
15MAY16
*Rotation Fix Implemented
*Added OpenGL ES 3.1 Support
*Various GPU and performance fixes
*Misc. CM Changes
04MAY16
*Initial Build
Best man ... ??
I will try it and give you Feedback...
Thank you very much sir! finally CM13 for this device I’m giving it a try
Thank YOU
I will definitely be thankful if this whole thing will work als daily driver one day! :fingers-crossed:
Thank you for your effort @awidawad !! :good::good::good:
Keep our picasso alive!
Works pretty good so far, thanks! Only thing I noticed is slow animation on the notification bar and auto rotation doesn't seem to work... Other than that great work!
Sent from my SM-T520 using Tapatalk
Cryonic90 said:
Works pretty good so far, thanks! Only thing I noticed is slow animation on the notification bar and auto rotation doesn't seem to work... Other than that great work!
Sent from my SM-T520 using Tapatalk
Click to expand...
Click to collapse
Works very good .. got same problems
nice a lot of us have been hoping for this. thanks!
Wow, this is awesome. Thank you for your hard work. I'm gonna try it as soon as a stable version is released.
Cryonic90 said:
Works pretty good so far, thanks! Only thing I noticed is slow animation on the notification bar and auto rotation doesn't seem to work... Other than that great work!
Sent from my SM-T520 using Tapatalk
Click to expand...
Click to collapse
I've noticed the same things. What I've found for auto rotation is a reboot or soft reboot temporarily fixes the issue for me. I'm going to look into fixing the camera and then look into auto rotation. As for the animation I haven't experienced it myself but will look out for it and take it from there.
Sent from my SM-T520 using XDA-Developers mobile app
Great work! So happy to finally have M on my tablet.
The main problem I see is that my external SD card doesn't get mounted.
Proper symlinks exist and point to '/sdcard1', but that folder is missing.
Dear awidawad,
Thank you very much for your CM13.0-unofficial-bacon build!
awidawad said:
What I've found for auto rotation is a reboot or soft reboot temporarily fixes the issue for me.
Click to expand...
Click to collapse
I/we have the exact same issue with CM13 and picassolte. Autorotation works after a reboot, but once the device goes to sleep for the first time it stops working. Logcat shows all kinds of activity related to rotation when it works, but once it stops, nothing is logged. It looks like the motion sensor is not reactivated when the device wakes from sleep.
Hello
mt520 picassowifi
seems to be very pleasant
but i can't access external sd & usb key
thanks
regards
I'm currently experiencing the same issues (auto-rotation, no camera, SD not mounting), but this is simply fantastic. And the awesome battery life from Android M makes it all worth it while you work out the bugs. Way to go keeping this device alive!
Ok, so I gave it a try and it seems quite smooth and stable. Awesome work awidawad, thank you again!
Because I use this tablet for online television streaming with the magineTV app (in Germany) I recognized that "widevine DRM" is not installed.. so I can't start streaming.
I guess this is also necessary to have if you're using google play movie or other streaming apps.
I just wanted to tell
There is problem in flashing of cm-13.0-20160505-UNOFFICIAL-picassowifi.zip.
https://www.androidfilehost.com/?fid=24531035584725336
Permanent return in TWRP.
M0lle said:
I/we have the exact same issue with CM13 and picassolte. Autorotation works after a reboot, but once the device goes to sleep for the first time it stops working. Logcat shows all kinds of activity related to rotation when it works, but once it stops, nothing is logged. It looks like the motion sensor is not reactivated when the device wakes from sleep.
Click to expand...
Click to collapse
Thanks for this observation, helps a lot. :good:
validatus said:
Hello
mt520 picassowifi
seems to be very pleasant
but i can't access external sd & usb key
thanks
regards
Click to expand...
Click to collapse
Flangan25 said:
I'm currently experiencing the same issues (auto-rotation, no camera, SD not mounting), but this is simply fantastic. And the awesome battery life from Android M makes it all worth it while you work out the bugs. Way to go keeping this device alive!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Thanks for letting me know. Tested my own SD card and have it noted. Will add this to bug list and work on a fix.
crisis_trustee said:
There is problem in flashing of cm-13.0-20160505-UNOFFICIAL-picassowifi.zip.
Permanent return in TWRP.
Click to expand...
Click to collapse
Are you using the latest TWRP?
crisis_trustee said:
There is problem in flashing of cm-13.0-20160505-UNOFFICIAL-picassowifi.zip.
https://www.androidfilehost.com/?fid=24531035584725336
Permanent return in TWRP.
Click to expand...
Click to collapse
I have the same issue, using the latest version of twrp, the 0504 works fine with the same version of twrp
Sent from my SM-T520 using Tapatalk
Newbie approach also possible?
Thanks for all the good work you're doing. I'm thrilled that I can upgrade my device to MM 6.0.
Sorry for my newbie questions, but as more readers are not really techies, maybe you can give an answer to these two questions?
1) Do you need root to flash this ROM? If so, how can I do that? Is there a sort of manual for non-techies available?
2) Where can I find TWRP Recovery, I can only find TWRP Manager (Requires root), TWRP Coordinatot (Requires root). Or do you mean something else? Can you give a link, please? How does it work?
Thanks a lot.
Also on behalf of lots of unexperienced users.
Best,
Hans

[ROM][CM11][4.4.4] Resurection Remix Nougat for Samsung Galaxy Y GT-S5360

Resurection Remix Nougat rom for Samsung Galaxy Y GT-S5360
Hi There the users are still using our totoro, I'm just a newbie developer and this is my first rom for the totoro but I did every Thing I can . Presenting to you the Resurection Remix for totoro
As we all know, Resurection Remix series of RR team is really nice with lots of nice features, after using it on my mi mix,
I had an idea to build the same rom for totoro.
Features:
Android Nougat launcher
Resurection Remix bootanimation(old)
Modded Material lock screen
Materials Status bar
Nougat Easteregg
and a lot of stuffs
Installation :
Same as cm11 but I prefer using TWRP to see the RR logo while installing
For TWRP , Go to Mohamad Afane's thread for that .
Here is the link to the thread https://forum.xda-developers.com/galaxy-y/development/recovery-twrp-2-8-6-0-touch-recovery-t3069824
Download:​Latest build:​Build 2.3 :​
From mediafire :https://www.mediafire.com/file/65v12vm9a41s772/RR v5.8.4[totoro][Build 2.3].zip
From g-drive :https://drive.google.com/open?id=0BzxtfqIfsOgqZFZiY3dldE9vMHM
Click to expand...
Click to collapse
Old builds :
Build 2.2
Mediafire :http://www.mediafire.com/file/n388jhj7u69tebf/RR+v5.8.4[totoro][Build+2.2].zip
G-drive : https://drive.google.com/file/d/0BzxtfqIfsOgqVE1FXzdUYnRuLWs/view
Dropbox : https://www.dropbox.com/s/uok03ibpmmov59k/RR v5.8.4[totoro][Build 2.2].zip?dl=0
Build 2.1
From Mediafire : http://www.mediafire.com/file/kfv27o7n8ezutbd/RR+v5.8.4[totoro][Build+2.1].zip
From G-drive : https://drive.google.com/file/d/0BzxtfqIfsOgqSVNGNG01dWFDYmM/view
From Dropbox : https://www.dropbox.com/s/s2mabqr16b225gf/RR v5.8.4[totoro][Build 2.1].zip?dl=0
Build 2.0 :
From Mediafire : https://www.mediafire.com/file/4gjmfazfcb4vxsa/RR v5.8.4[totoro][Build 2.0].zip
From G-drive : https://drive.google.com/file/d/0BzxtfqIfsOgqTzcxTk9XMlR6SzA/view
From Dropbox : https://www.dropbox.com/s/mh958nexbbmye8t/RR v5.8.4[totoro][Build 2.0].zip?dl=0
Click to expand...
Click to collapse
For gapps , dowload this gapps package from raisul2010.5369's cmx11 link :https://forum.xda-developers.com/devdb/project/dl/?id=20183
Bugs list :​Root(fixed with the fix bug patches down bellow)​Two battery bar on the status bar in build 2.3​Some usual cm11 ,Check Herehttps://forum.xda-developers.com/showthread.php?t=2766229​Others,tell me ​To fix The root bug :
First. Flash other CM11 kernel with cwm 6.0.5.3( I prefer flashing Pinaslang kernel)
Then Reboot and flash this file with other files to help your device run cm11 smoothy I give you bellow
Fix bug file : https://www.mediafire.com/file/wn5t3si4rpnfd2q/fix root RR rom.zipand remeber to choose yes,fix root when ya reboot
Or just flash this and you don't need to do too much step if you do the first option
https://download.chainfire.eu/370/supersu/
Scripts to Deal with lags (RECOMMENDED):
Broadcom Booster : https://forum.xda-developers.com/showthread.php?t=2494092
PurePerformances™X : https://forum.xda-developers.com/showthread.php?t=2361379
Speedroid : https://forum.xda-developers.com/galaxy-y/development/mod-speedroid-v1-t3456774
After Flashing these, Reboot system and Then reboot to recovery once again and flash railsul2010.5396's samurai kernel
About Cyanogenmod
* Your warranty is now void.
* Me / CM / AndroidARMv6 Team are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
Click to expand...
Click to collapse
Thanks to :
-Samsung
-Google
-railsul2010.5396 for giving me advices and his kernel, also his gapps package ,too
-androidarmv6
-Cyanogenmod
-Resurrection Remix team
-EatHeat for his pie
Credits:
-psyke83
-bielt.v3
-spacecaker
-vdhero(Me,for building it )
XDADevDB Information
[Rom][CM11][4.4.4]Resurection Remix for Samsung Galaxy Y GT-S5360
Contributors:
Source Code: http://github.com/androidarmv6
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 2.6.x
ROM Firmware Required: Stock 2.3 Firmware
Based On: CyanogenMod
Version Information :
Status : Stable
Current Stable Version: Build [2.3]
Stable Release Date : 2017-10-15
Current Beta Version: Unknown ( Because I didn't release It)
Beta Release Date: Unknown
Created : 2017-09-16
Last Updated : 2017-10-15
Some Screen shot for ya
Screenshot from the rom
http://www.mediafire.com/view/dd8569mjeya84dn/Screenshot_2017-09-15-19-58-26.png
http://www.mediafire.com/view/4pxb77bbcecnacj/Screenshot_2017-09-15-20-03-51.png
http://www.mediafire.com/view/b44bupkpi97vm34/Screenshot_2017-09-16-10-36-33.png
http://www.mediafire.com/view/ls38ul5qyd498fz/Screenshot_2017-09-16-10-37-58.png
http://www.mediafire.com/view/m3gpze2bp5pl7wk/Screenshot_2017-09-16-10-36-26.png
http://www.mediafire.com/view/f0iqjvg6o3j7df6/Screenshot_2017-09-16-10-37-48.png
http://www.mediafire.com/view/k9bsne80f70n6qs/Screenshot_2017-09-15-00-09-01.png
http://www.mediafire.com/view/u9asskdsql81293/Screenshot_2017-09-15-00-08-56.png
Downloading... Flash Later :thumbup:
Btw... I cant Download The twrp..
Sent from my GT-S5360 using XDA Freemium
I Flash it... then many bugs and graphical bugs appeared...
1. Circle Battery turns pixelated and with black background
2. Android Platlogo is not appearing in About Phone...
3. The Status Bar Is little bit laggy...
4. Gestures and Omniswitch FC...
5. Many Excess apk...
6. Lockscreen Bugs...
7. No Music Player...
And Still Using it to find More...
Sent from my GT-S5360 using XDA Freemium
thank you for reported bugs
Crahm06 said:
I Flash it... then many bugs and graphical bugs appeared...
1. Circle Battery turns pixelated and with black background
2. Android Platlogo is not appearing in About Phone...
3. The Status Bar Is little bit laggy...
4. Gestures and Omniswitch FC...
5. Many Excess apk...
6. Lockscreen Bugs...
7. No Music Player...
And Still Using it to find More...
Sent from my GT-S5360 using XDA Freemium
Click to expand...
Click to collapse
Thank you for reporting me about the bugs, I'm fixing it :good::good::good:
Did you turn on the lockscreen
Crahm06 said:
I Flash it... then many bugs and graphical bugs appeared...
1. Circle Battery turns pixelated and with black background
2. Android Platlogo is not appearing in About Phone...
3. The Status Bar Is little bit laggy...
4. Gestures and Omniswitch FC...
5. Many Excess apk...
6. Lockscreen Bugs...
7. No Music Player...
And Still Using it to find More...
Sent from my GT-S5360 using XDA Freemium
Click to expand...
Click to collapse
did you turn on lock screen by change screen security to slide, I turn it off on the rom, you have to turn it on
Try to use Sir Raisul CMX11 Material Theme Rom As your Base.... :thumbup:
Sent from my GT-S5360 using XDA Freemium
the rom update
Crahm06 said:
Try to use Sir Raisul CMX11 Material Theme Rom As your Base.... :thumbup:
Sent from my GT-S5360 using XDA Freemium
Click to expand...
Click to collapse
I built v2.1 of the rom to fix some bugs, can you try it out
vdhero said:
I built v2.1 of the rom to fix some bugs, can you try it out
Click to expand...
Click to collapse
I will flash it and give you reports later:thumbup:??
Sent from my GT-S5360 using XDA Freemium
Hey! Just installed your ROM on my GT-S5363 and it's ok, even pretty fast for CM11 based ROM. However the root checker app says like my phone's actually not rooted. So my question is what kinda app should I use to root my phone? Thanks in advance and wish you a nice Friday!
Fix bug
emillyWse said:
Hey! Just installed your ROM on my GT-S5363 and it's ok, even pretty fast for CM11 based ROM. However the root checker app says like my phone's actually not rooted. So my question is what kinda app should I use to root my phone? Thanks in advance and wish you a nice Friday!
Click to expand...
Click to collapse
After flashing the rom,flash other cm11 kernel with cwm6.0.5.3 then reboot. after that,flash the fix bug file with some files that help galaxy y run cm11 smoothier and when you reboot choose yes,fix root,and It'll reboot and it'll start optimizing and reboot into recovery once more and flash raisul2010..5396's samurai kernel or there's an easy way that is flash the update SU on chainfire download sever but the seacond option will takes about 2mb of memory when the first option wil only takes 100kb . Thank you for using my rom.Have a nice day
vdhero said:
After flashing the rom,flash other cm11 kernel with cwm6.0.5.3 then reboot. after that,flash the fix bug file with some files that help galaxy y run cm11 smoothier and when you reboot choose yes,fix root,and It'll reboot and it'll start optimizing and reboot into recovery once more and flash raisul2010..5396's samurai kernel or there's an easy way that is flash the update SU on chainfire download sever but the seacond option will takes about 2mb of memory when the first option wil only takes 100kb . Thank you for using my rom.Have a nice day
Click to expand...
Click to collapse
You're more than welcome and thanks so much for your reply as well. Gonna give it a try as soon as possible. Have a nice day too!
Google apps including PlayStore unavailable
Hello bro and thanks a lot for your wonderful work! Hopefully you can reply on this report soon.
I have read all the bugs from the previous updates and prior to installing the 2.2 version I have encountered these bugs:
- The root issue (hopefully you can find a way to make it automatic or at least include all the necessary zips with the steps in the post)
- Lock screen lags
- Status bar dark background lag
- Lots of extra apps (at least in my opinion)
- Necessary missing apps such as google play
- Can't add accounts from the settings.
Waiting to hear a reply from you kind brother and Congratulations for the wonderful work again!!
kailopictza said:
Hello bro and thanks a lot for your wonderful work! Hopefully you can reply on this report soon.
I have read all the bugs from the previous updates and prior to installing the 2.2 version I have encountered these bugs:
- The root issue (hopefully you can find a way to make it automatic or at least include all the necessary zips with the steps in the post)
- Lock screen lags
- Status bar dark background lag
- Lots of extra apps (at least in my opinion)
- Necessary missing apps such as google play
- Can't add accounts from the settings.
Waiting to hear a reply from you kind brother and Congratulations for the wonderful work again!!
Click to expand...
Click to collapse
If you want to have Google Play and add your Google account you need to flash Gapps, as in every CM-based rom.
Sent from my Moto Z Play using XDA Labs
erriperry said:
If you want to have Google Play and add your Google account you need to flash Gapps, as in every CM-based rom.
Sent from my Moto Z Play using XDA Labs
Click to expand...
Click to collapse
Could you kindly pass me a link for appropriate gapps for S5630?
kailopictza said:
Could you kindly pass me a link for appropriate gapps for S5630?
Click to expand...
Click to collapse
You can use this GAPPS package
fix root
I edited the post to add another way to fix root, check the thread again if you guys want to fix the root quickly
Thanks to all of you for using my rom
I'm on other custom stock rom, how to flash this rom, gapps, kernels, mods, etc?
Can someone post a simple flashing procedure please.
Thanx in advanced, best regards !
installation
rubentkato77 said:
I'm on other custom stock rom, how to flash this rom, gapps, kernels, mods, etc?
Can someone post a simple flashing procedure please.
Thanx in advanced, best regards !
Click to expand...
Click to collapse
It's simple.First ,boot you phone to recovery and flash this TWRP package
#https://androidfilehost.com/?w=files&flid=28622
After that reboot the recovery and you'll see the TWRP menu.Go to wipe,tick every thing except sdcard and swipe the bar.
Then go back to main menu and go to mount,tick every thing except mount system read-only
then go back and choose install then flash the rom,if you want gapps,choose add more zip and choose this gapps package http://forum.xda-developers.com/devdb/project/dl/?id=20183
And don't forget to add flash this superSU package to fix root after first boot
https://download.chainfire.eu/370/supersu/
Simple :v
vdhero said:
It's simple.First ,boot you phone to recovery and flash this TWRP package
#https://androidfilehost.com/?w=files&flid=28622
After that reboot the recovery and you'll see the TWRP menu.Go to wipe,tick every thing except sdcard and swipe the bar.
Then go back to main menu and go to mount,tick every thing except mount system read-only
then go back and choose install then flash the rom,if you want gapps,choose add more zip and choose this gapps package http://forum.xda-developers.com/devdb/project/dl/?id=20183
And don't forget to add flash this superSU package to fix root after first boot
https://download.chainfire.eu/370/supersu/
Simple :v
Click to expand...
Click to collapse
Wow wow wow new Galaxy Young !!!!
What performance mod do you recomend?
Thanx, loving the ROM.
Best regards

Categories

Resources