Related
[ROM][7.1][UNOFFICIAL] CM14.1 for Nexus 7 2012 (grouper)
*** Disclamer
By downloading and installing this ROM you agree that you do so at
your own risk, and that you understand that it probably voids your
warranty. (But does anyone still have an active warranty on this 2012
device?)
Introduction
@AndDiSa's AOSP 7 builds look pretty nice, but I needed something that seamlessly upgrades from CM13. @GtrCraft who provided our CM13 builds has moved on to other devices, so we need a new CM maintainer. I may not be the right person for that job... but I can at least share the build I made for myself. Perhaps someone will be motivated to join the fun or even take over.
[Images on screenshots tab.]
Installation instructions
Back up your data and previous ROM with TWRP 3.0.2.
Download from link below.
Wipe system, cache, dalvik.
Also wipe data unless you are coming from CM13.
Install the ROM.
Optionally add opengapps-pico.
With default settings it will give an error about insufficient space. To avoid that, first copy this gapps-config-grouper.txt file, perhaps edit it to your taste (instructions here), then copy to the device in the same directory as the opengapps zip. The opengapps updater-script will look for it there when you install opengapps.
Reboot.
WAIT for system to settle before you decide it is slow. Some of the app optimization which used to happen during initial boot now seems to happen in the background. When it's finished, responsiveness will improve.
Download
cm-14.1-20161226-UNOFFICIAL-grouper.zip (AndroidFileHost)
Credits / Thanks
Google / AOSP
CyanogenMod
@AndDiSa for AOSP 7.1 -- I use his kernel tree directly, and many of his device tree mods
@GtrCraft for the CM13 tree upon which mine is based
XDA:DevDB Information
Unofficial CM14.1 for Nexus 7, ROM for the Nexus 7
Contributors
aaopt, AndDiSa,GtrCraft
Source Code: https://github.com/aperomsik/cyanogenmod_android_device_asus_grouper/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.1.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-11-25
Last Updated 2016-12-31
Reserved
Changelog
Nearly all builds include CM sync -- only mentioned specifically when it was the main point of the build.
20161226 (AndroidFileHost)
LiveDisplay works (due to upstream work).
20161212 (AndroidFileHost)
NFC
20161208 (AndroidFileHost)
CM sync, including 7.1.1r4
20161130 (AndroidFileHost)
Stock camera works.
20161125 (DevHost)
Initial posting.
seems to be pretty stable so far but i cant get pico gapps to install even after installing the rom with the gapps-config.
There is a 3.4 kernel build for grouper which was helpful for cm13. Can you incorporate that into your build ?
why is this not even on development thread?
is this based on anddisa's device,vendor trees? cuz that build is super fast. i am downloading anyway.
turnert said:
seems to be pretty stable so far but i cant get pico gapps to install even after installing the rom with the gapps-config.
Click to expand...
Click to collapse
Sorry about that. I meant to say .gapps-config goes with the gapps zip, not with the ROM. Corrected, and also edited for clarity. If it still doesn't work for you, look at the log file it generates in the same folder as the zip, and make sure it says it read your config file.
abhifx said:
why is this not even on development thread?
Click to expand...
Click to collapse
I had originally put it in development, but it took me too long to fill in the devdb new project page... after it made me reload the page and reenter some things, apparently I wound up in general by mistake.
abhifx said:
is this based on anddisa's device,vendor trees? cuz that build is super fast. i am downloading anyway.
Click to expand...
Click to collapse
Yes, when I saw how fast @AndDiSa's AOSP 7 ROM was, I had to try a CM14 build. I'm using his kernel and vendor trees, and many of his recent device tree commits cherry-picked into a fork of @GtrCraft's CM13 device tree.
Requested mods to move this to development section.
Also can't install gapps with the given script. Anyone up for new gapps zip?
abhifx said:
Also can't install gapps with the given script. Anyone up for new gapps zip?
Click to expand...
Click to collapse
Please pastebin your resulting open_gapps_log.txt, and send me the link . You should find the log file on the device in the directory where you had put the gapps zip and config files. For comparison, mine is here.
aaopt said:
Please pastebin your resulting open_gapps_log.txt, and send me the link . You should find the log file on the device in the directory where you had put the gapps zip and config files. For comparison, mine is here.
Click to expand...
Click to collapse
will post it in the evening, i dont think gapps is picking up the config file, should the config file go inside the zip file? i am just pasting it outside the zip file.
Frankly the ROM is working fine, however i have yet to lock gps and test it which is my main usage.
After seeing CM booting, i would love to see other derived ROMs (AICp, RR etc)
Maybe you can post a guide others may build it too (i dont have the disk space or the bandwidth to do it anyway)
abhifx said:
will post it in the evening, i dont think gapps is picking up the config file, should the config file go inside the zip file? i am just pasting it outside the zip file.
Frankly the ROM is working fine, however i have yet to lock gps and test it.
Click to expand...
Click to collapse
Not in the zip file... Just alongside, in the same folder on the device (or usb stick if you install via OTG) where the Gapps zip is.
Sent from my MotoG3 using Tapatalk
The config files name needs to be "gapps-config.txt" or ".gapps-config". I just tried the first option an gapps installed just fine!
abhifx said:
will post it in the evening, i dont think gapps is picking up the config file, should the config file go inside the zip file? i am just pasting it outside the zip file.
Click to expand...
Click to collapse
I was having issues as well with the config file. I tried putting it in all kinds of places, but no dice.
I ended up using the Aroma Open Gapps package which worked great.
Haven't tried much on this ROM yet, but things feel snappy.
hawkshot said:
I was having issues as well with the config file. I tried putting it in all kinds of places, but no dice.
I ended up using the Aroma Open Gapps package which worked great.
Haven't tried much on this ROM yet, but things feel snappy.
Click to expand...
Click to collapse
ah yes.. Aroma Gapps, which keeps on cancelling this huge package. oh well will try renaming the text file
---------- Post added at 01:25 PM ---------- Previous post was at 12:49 PM ----------
ok this was even more weird, i copied the files in a separate directory (the config file was in txt format as suggested by @gothier) and this worked. earlier everything was in the root directory and nothing worked no matter was was the file extension, hidden or not.
Thanks OP.
I've successfully installed the ROM on my Grouper device.
Also, I've installed Opengapps via CF's Flashfire app and it worked very well.
Thank you for the rom.
I updated from CM13, install gapps with config , only rename it to ".gapps-config-grouper". I use all from USB drive via OTG for all my android devices.
All work fine.
Even in pico gapps package I had to exclude some apps so it could be installed. I've written in in gapps-config.txt this way:
GoogleTTS
calsync
A bug
When I pull down the notification/ quick settings, the device crashes and reverts to lock screen.
eNVy said:
When I pull down the notification/ quick settings, the device crashes and reverts to lock screen.
Click to expand...
Click to collapse
havent crashed on me yet.
@aaopt, it seems anddisa has a made some changes wherein camera is also working, maybe you can update the same for CM14.1?
It doesnot happen always. Sometimes only.
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Download Links
LineageOS:
Downloads: https://download.lineageos.org/d2vzw
Google apps addon:
OpenGapps: http://opengapps.org/ (you'll want a zip for the ARM platform, Android version 7.1)
HEADS UP: Be sure you flash the gapps package with your rom. If you boot your rom, then go back and try to flash gapps after the fact, you're gonna have a bad time.
Firmware:
Your best bet is to be on the MF1 bootstack/NE1 modem combo. Here's a flashable zip (this only needs to be done once): http://www.invisiblek.org/firmware/d2/d2vzw_MF1_firmware_NE1_modem.zip
Misc Links
Changelog:
Link: https://download.lineageos.org/d2vzw/changes/
Learn to build yourself:
Link: https://wiki.lineageos.org/devices/d2vzw/build
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[ROM][OFFICIAL] LineageOS 14.1 Nightlies for the Verizon Samsung Galaxy S3 (d2vzw), ROM for the Verizon Samsung Galaxy S III
Contributors
invisiblek
Source Code: http://github.com/LineageOS
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2016-12-05
Last Updated 2016-12-05
reserved
Hallelujah!
Is this the eighth or ninth life of this great phone?
@invisiblek, are there plans for the release of a Snapshot of CM13.0 for the d2vzw?
Congratulations on the "official" release!! Thank you for such an excellent and stable ROM for our ooooold, but no longer irrelevant, s3!
Nice job! Wich partitions can I mount as f2fs?
Just out of curiosity regarding the CM14.1...
Anyone having issue with internet connectivity specifically with the Play Store only (downloaded from Open GApps)?
Also, is anyone having issues with their external MicroSD. Though the external MicroSD can be viewed and can browse it, I'm Specifically stating the inability to execute, open, write to, etc...?
I had already sent the issues I'm having along with all my log files to @invisiblek and was curious as to any others experiencing the same/similar issues I experienced.
Thank you all for your time and understanding!
Thank you @invisiblek and other contributors. This is a great rom for this old phone. My DD is a LG G4, again, I went back to that after three Note 7's and all that drama. It's sad when a years old Galaxy S3 is running the latest and greatest but my LG G4 is still on last years Android! Yikes
I'm only using the SGS3 as a Wifi device so I can't comment on Cell radio functions but it's very smooth and seems markedly faster than when I was last using it as a DD. The only issue I've had and it may not even be related to this rom... I wanted to use Chainfire's PryFi to stick it to Kohls and Walmart that use WiFi Mac trackers, but when I launch PryFi and turn it on, it almost immediately crashes no matter what I do. Wipe cache, dalvik, reset and I get the same thing.
Thanks for the great work. Much appreciated!
@invisiblek, I'm reading elsewhere that the CM14.x should be installed first, then after the setup is accomplished, reboot back in to the recovery, then flash the GApps package.
Is this correct?
I just wanted to be sure in regards to the unconventional method of flashing the CM and the GApps together then reboot.
But, as you may know, after installing the 2 conventionally, I'm having trouble with the Play Store as well as the External MicroSD after setup.
I'd really appreciate your confirmation.
Thanks a Bunch!
Sent from my d2vzw using XDA Labs
Ibuprophen said:
@invisiblek, I'm reading elsewhere that the CM14.x should be installed first, then after the setup is accomplished, reboot back in to the recovery, then flash the GApps package.
Is this correct?
I just wanted to be sure in regards to the unconventional method of flashing the CM and the GApps together then reboot.
But, as you may know, after installing the 2 conventionally, I'm having trouble with the Play Store as well as the External MicroSD after setup.
I'd really appreciate your confirmation.
Thanks a Bunch!
Sent from my d2vzw using XDA Labs
Click to expand...
Click to collapse
I had a problem installing the first time - I put build+Open GApps Aroma in the que and when the Aroma install was supposed to come up everything went black but the phone was still on. I flashed one and then the other without booting and it booted into initial setup normally.
But, I created a Nandroid with TWRP 2.8.7.0 and tried to restore the last Unofficial 14.1 build nandroid that worked normally but I couldn't get the sim card to work. Same when I tried to restore the new official. I tried numerous different ways to hold my mouth but it would never mount the SIM and settings was crapped out. I was able to restore my last MM nandroid and have it work normally. I've just switched to the latest TWRP 3.x.x.x. Don't know if that has anything to do with it....
I'm clean installing the new official again! It got stuck on boot (wrong boot animation, too) but pulling the batt and restarting, it went normally. (My Tibu settings were in the /data wipe. Gotta mount one and pull them )
Master Cylinder said:
I had a problem installing the first time - I put build+Open GApps Aroma in the que and when the Aroma install was supposed to come up everything went black but the phone was still on. I flashed one and then the other without booting and it booted into initial setup normally.
But, I created a Nandroid with TWRP 2.8.7.0 and tried to restore the last Unofficial 14.1 build nandroid that worked normally but I couldn't get the sim card to work. Same when I tried to restore the new official. I tried numerous different ways to hold my mouth but it would never mount the SIM and settings was crapped out. I was able to restore my last MM nandroid and have it work normally. I've just switched to the latest TWRP 3.x.x.x. Don't know if that has anything to do with it....
I'm clean installing the new official again! It got stuck on boot (wrong boot animation, too) but pulling the batt and restarting, it went normally. (My Tibu settings were in the /data wipe. Gotta mount one and pull them )
Click to expand...
Click to collapse
Thank you for your response!
I always had the latest TWRP 3.0.2-0 installed.
I flashed the CM14.1 20161207, Open GApps Pico 20161207 and, at first, SuperSU 2.78 Stable then when I retried a fresh install, i used SuperSU 2.78 SR5.
The same issues occurred (primarily) with the Play Store not being able to access the Internet the Internet and being able to see everything on my External MicroSD but, still not being able to read, write, move copy, install, etc...
I did see, during the initial bootup where you have the initial setup of CM & Google, the Google setup went fine but, I did notice that the carrier name reflected "no service" or "unknown" or something similar. I had ventured in to the network settings and did see everything needed in there so I didn't give it another thought.
To be honest, my opinion is that i really don't think that the release of the OFFICIAL CM14.1 Nightly was not ready yet.
I had to E-mailed @invisiblek the list of issues along with the installation log files from both the CM14.1 and the GApps but, I haven't even received an acknowledgement of at least a thank you.
@invisiblek is listed as the primary point of contact for Cyanogenmod and other than e-mailing him along with posting the issue here to his attention, I'm not sure how else to report any issues/feedback to Cyanogenmod... Cyanogenmod doesn't really pay attention to their own forums that has resulted in most individuals not even bothering with posting anything there anymore.
I'm personally going to put CM14.1 on hold till there's either some indication of improvement or finding some information reflecting my issues with some fixes, tryouts, solutions, etc...
I'm real disappointed with this...
Sent from my d2vzw using XDA Labs
Ibuprophen said:
Thank you for your response!
I always had the latest TWRP 3.0.2-0 installed.
I flashed the CM14.1 20161207, Open GApps Pico 20161207 and, at first, SuperSU 2.78 Stable then when I retried a fresh install, i used SuperSU 2.78 SR5.
The same issues occurred (primarily) with the Play Store not being able to access the Internet the Internet and being able to see everything on my External MicroSD but, still not being able to read, write, move copy, install, etc...
I did see, during the initial bootup where you have the initial setup of CM & Google, the Google setup went fine but, I did notice that the carrier name reflected "no service" or "unknown" or something similar. I had ventured in to the network settings and did see everything needed in there so I didn't give it another thought.
To be honest, my opinion is that i really don't think that the release of the OFFICIAL CM14.1 Nightly was not ready yet.
I had to E-mailed @invisiblek the list of issues along with the installation log files from both the CM14.1 and the GApps but, I haven't even received an acknowledgement of at least a thank you.
@invisiblek is listed as the primary point of contact for Cyanogenmod and other than e-mailing him along with posting the issue here to his attention, I'm not sure how else to report any issues/feedback to Cyanogenmod... Cyanogenmod doesn't really pay attention to their own forums that has resulted in most individuals not even bothering with posting anything there anymore.
I'm personally going to put CM14.1 on hold till there's either some indication of improvement or finding some information reflecting my issues with some fixes, tryouts, solutions, etc...
I'm real disappointed with this...
Sent from my d2vzw using XDA Labs
Click to expand...
Click to collapse
I'll attempt to try to help with some of the issues here, as I have direct contact with invisiblek pretty much daily. First I will start off with a few questions, NOT poking, just asking, this also may address some previous posts as well... You have a verizon SCH-I535 correct, and not another variant? Just making sure. And to start you wiped data in TWRP (wipe to install new ROM option basically). Told it to flash your 12/07 build? Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps? After it rebooted, it sometimes takes a while to get the setup to actually start and display, sometimes it goes to a black screen for minutes, but be patient, it will come.. At that point in time, it will initialize sim card and be connected, as this was my experience on all 3 of my S3 phones in my household. Then proceed through setup...
Is your external card formatted as "portable storage", or is it formatted as "Adopted storage". Also what type of filesystem do you have the card formatted with? What file manager are you using to try to access your card with? There was some expected changes that might have to be worked out as the "unofficial" roms were running Selinux in permissive mode, and the "official" roms are running it in Enforcing mode. That is bound to cause some small differences in the way the 2 roms behave. Also, I need to ask why you are trying to install SuperSU on a rom that already has Root (and the ability to manage it) built into the rom? There might be some issues being caused by that in itself.
I know that personally BusyBox (I rely on it daily) will NOT install on the official for me, but installs fine on the unofficials. Also, I have had limited luck with the built in file manager. I have used ES File Explorer forever, and it continues to behave well on this rom. Also, even if you are going to nandroid back and forth between official and unofficial, it is best to do a wipe of DATA before the nandroid... As far as the play store goes, I haven't experienced any lack of connectivity. I do get very small intermittent blips where it seems like it isn't connected for a second or 2, but it is very rare, and it has always been like that as far as I can remember.. Part of the reason that is for me is because I use a network extender, and it has always been the achilles heel with CM.
Try going into TWRP, do the "wipe to install new rom", add the cm zip, and ALSO add the latest "Opengapps arm 7.1 pico or micro" (your choice) build into the zip queue so that they are flashed in succession. Let it rip, and see if that offers you any different results. After you get it initially setup, go into developer options and enable root as needed. Give it a run and see what issue are still present, if any. I am surprised to hear some of these issues, as between myself, my kids, and a handful of friends, everyone is super stoked at how well these early builds are running... I myself have less than 3 reported issues from friends that we are looking into, and they are all just cosmetic bugs so far... I will be glad to try to help in any way possible..
P.S. There have been quite a few things resolved/changed between TWRP 2.8.7.0 and 3.0.2-0, I would highly suggest not only upgrading to the latest TWRP version, but also making sure you are on the firmware versions that are mentioned in the OP.
Stealth111
Stealth111 said:
I'll attempt to try to help with some of the issues here, as I have direct contact with invisiblek pretty much daily. First I will start off with a few questions, NOT poking, just asking, this also may address some previous posts as well... You have a verizon SCH-I535 correct, and not another variant? Just making sure. And to start you wiped data in TWRP (wipe to install new ROM option basically). Told it to flash your 12/07 build? Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps? After it rebooted, it sometimes takes a while to get the setup to actually start and display, sometimes it goes to a black screen for minutes, but be patient, it will come.. At that point in time, it will initialize sim card and be connected, as this was my experience on all 3 of my S3 phones in my household. Then proceed through setup...
Is your external card formatted as "portable storage", or is it formatted as "Adopted storage". Also what type of filesystem do you have the card formatted with? What file manager are you using to try to access your card with? There was some expected changes that might have to be worked out as the "unofficial" roms were running Selinux in permissive mode, and the "official" roms are running it in Enforcing mode. That is bound to cause some small differences in the way the 2 roms behave. Also, I need to ask why you are trying to install SuperSU on a rom that already has Root (and the ability to manage it) built into the rom? There might be some issues being caused by that in itself.
I know that personally BusyBox (I rely on it daily) will NOT install on the official for me, but installs fine on the unofficials. Also, I have had limited luck with the built in file manager. I have used ES File Explorer forever, and it continues to behave well on this rom. Also, even if you are going to nandroid back and forth between official and unofficial, it is best to do a wipe of DATA before the nandroid... As far as the play store goes, I haven't experienced any lack of connectivity. I do get very small intermittent blips where it seems like it isn't connected for a second or 2, but it is very rare, and it has always been like that as far as I can remember.. Part of the reason that is for me is because I use a network extender, and it has always been the achilles heel with CM.
Try going into TWRP, do the "wipe to install new rom", add the cm zip, and ALSO add the latest "Opengapps arm 7.1 pico or micro" (your choice) build into the zip queue so that they are flashed in succession. Let it rip, and see if that offers you any different results. After you get it initially setup, go into developer options and enable root as needed. Give it a run and see what issue are still present, if any. I am surprised to hear some of these issues, as between myself, my kids, and a handful of friends, everyone is super stoked at how well these early builds are running... I myself have less than 3 reported issues from friends that we are looking into, and they are all just cosmetic bugs so far... I will be glad to try to help in any way possible..
P.S. There have been quite a few things resolved/changed between TWRP 2.8.7.0 and 3.0.2-0, I would highly suggest not only upgrading to the latest TWRP version, but also making sure you are on the firmware versions that are mentioned in the OP.
Stealth111
Click to expand...
Click to collapse
Okay... I tried to sort out and answer all the questions the best i could.
I also attached the log files. They are dated according to the Nightly releases.
Q: You have a verizon SCH-I535 correct, and not another variant?
A: Yes. I have an SCH-I535.
Q: And to start you wiped data in TWRP (wipe to install new ROM option basically).
A: 1) Factory Reset. 2) Wipe Dalvik, Data, Internal Storage, Cache and System. 3) Format Data. Then Restart Recovery back to TWRP.
Q: Told it to flash your 12/07 build?
Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps?
A: Install and select CM14.1 12/07 build then the Open GApps 7.1 ARM Pico. To add... I tried flashing the 2 above only, then tried the same 2 above with SuperSU 2.78 Stable, lastly the 2 above with SuperSU 2.78 SR5. All resulted with the same issues.
Q: Is your external card formatted as "portable storage", or is it formatted as "Adopted storage".
A: Portable Storage.
Q: Also what type of filesystem do you have the card formatted with?
A: VFAT
Q: What file manager are you using to try to access your card with?
A: Stock & ES File Explorer Pro
Q: Also, I need to ask why you are trying to install SuperSU on a rom that already has Root (and the ability to manage it) built into the rom?
A: I'm aware of the stock root manager but, i've always preferred SuperSU's root management.
I really appreciate your assistance and please don't hesitate to defer to @invisiblek if necessary.
Also, please keep in mind that I'm not in a race. Take your time because patience is a virtue...
Thank you very much!!!
I wonder if the GApps issue is the underlying issue. I hope @MastahF & @Rapper_skull is aware of and working on it?
Sent from my d2vzw using XDA Labs
Stealth111 said:
I know that personally BusyBox (I rely on it daily) will NOT install on the official for me, but installs fine on the unofficials.
Stealth111
Click to expand...
Click to collapse
I installed Stericson BusyBox Pro using Google Play and it works fine! Lucky me!
Ibuprophen said:
Okay... I tried to sort out and answer all the questions the best i could.
I also attached the log files. They are dated according to the Nightly releases.
Q: You have a verizon SCH-I535 correct, and not another variant?
A: Yes. I have an SCH-I535.
Q: And to start you wiped data in TWRP (wipe to install new ROM option basically).
A: 1) Factory Reset. 2) Wipe Dalvik, Data, Internal Storage, Cache and System. 3) Format Data. Then Restart Recovery back to TWRP.
Q: Told it to flash your 12/07 build?
Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps?
A: Install and select CM14.1 12/07 build then the Open GApps 7.1 ARM Pico. To add... I tried flashing the 2 above only, then tried the same 2 above with SuperSU 2.78 Stable, lastly the 2 above with SuperSU 2.78 SR5. All resulted with the same issues.
Click to expand...
Click to collapse
I know this may sound funny but I've had this EXACT response from clean installs using the tiny GApps packages. Try one of the larger ones or the Aroma installer. (I know it's annoying if you want to keep all that crap off your phone ...)
As I said, I installed without using the qeue. I also wiped Dalvik/cache AFTER the installations, as per the OpenGApps instructions.
Oh, and my phone is purring like a kitten with 12/7 on it! XD
PS - Except for that dang restore issue. Scared to try it again but I gotta try it again eventually.
Master Cylinder said:
I installed Stericson BusyBox Pro using Google Play and it works fine! Lucky me!
Click to expand...
Click to collapse
I have the same version as well. I go to the store, click install on the Pro version. It installs just fine... I then go in and open the program, it immediately asks for the needed root permissions, which I promptly give it, then I close the welcome message. When I actually then click install from within the program, it then tries to install for about 2 seconds and then says "oops, it looks like the installation was unsuccessful, maybe try a different location"....
Who knows.... :laugh:
Other than that, I agree, purring like a kitten!
Stealth111
Master Cylinder said:
I installed Stericson BusyBox Pro using Google Play and it works fine! Lucky me!
I know this may sound funny but I've had this EXACT response from clean installs using the tiny GApps packages. Try one of the larger ones or the Aroma installer. (I know it's annoying if you want to keep all that crap off your phone ...)
As I said, I installed without using the qeue. I also wiped Dalvik/cache AFTER the installations, as per the OpenGApps instructions.
Oh, and my phone is purring like a kitten with 12/7 on it! XD
PS - Except for that dang restore issue. Scared to try it again but I gotta try it again eventually.
Click to expand...
Click to collapse
I tried the nano on one attempt thinking that pico was the culprit but, the same issue...
Sent from my d2vzw using XDA Labs
Sorry to ask this again but wich partitions should be remounted as f2fs for better performance?
Sent from my Pixel using XDA Forums Pro.
Ibuprophen said:
I tried the nano on one attempt thinking that pico was the culprit but, the same issue...
Sent from my d2vzw using XDA Labs
Click to expand...
Click to collapse
I had the same problem with Nano. If you're gonna spend the time to do it, go big. Bigger rather than smaller.
Pierre2324 said:
Sorry to ask this again but wich partitions should be remounted as f2fs for better performance?
Click to expand...
Click to collapse
Here's a link that, i believe, will answer your question:
http://forum.xda-developers.com/showthread.php?t=2537119
Good Luck!
Sent from my d2vzw using XDA Labs
---------- Post added at 02:14 AM ---------- Previous post was at 01:54 AM ----------
Master Cylinder said:
I had the same problem with Nano. If you're gonna spend the time to do it, go big. Bigger rather than smaller.
Click to expand...
Click to collapse
There was a member in the GApps thread who had mentioned that he had a similar issue.
He stated that what worked for him was flashing a GApps Pico package on from about 30 days ago.
I believe that others had to flash their GApps packages from about 30 days ago had worked for them.
I know that this is an issue for many others who also reported it to the Dev(s).
I can't think of what in the world is going on...
Sent from my d2vzw using XDA Labs
Running smooth as ice.......only issue I've had was a single browser hicup. Incredible work, makes me smile knowing I have a newer version on my ancient phone than most of the $700+ flagship phones. Invisablek you sir are the man:good:
During the last few months I have been testing several Nougat rom/kernel/modem/su combinations for the hlte N9005 international.
I created this thread to share my setup, hoping it will help others to save the many hours of research, trial, error and frustration I had before reaching the jackpot.
I have 3 hlte phones at my disposal, two myself and one my wife. All three are running trouble free.
By using my setup you will get:
Absolutely no freezes, reboots or FCs
Stable root and Safetynet checks ok
GPS fast and stable fix - average 5 seconds worst 20 seconds
Low battery drain (of course actual drain depends heavily on your apps and usage)
Everything works (AFAIK - you tell me what does not)
Keep in mind my main goal is to provide a stable setup. I will do my best to update this thread regularly, but it is very unlikely I will be using the very latest builds available, mainly because before I adopt a new build it must be thoroughly tested.
If you're interested head to the guide in Post #2
Why Resurrection Remix?
RR has, IMHO, the best combination of features and stability. The RR team has been around for a long time without the ups and downs of other roms. For the Note 3 we are in a very fortunate time, with an official build and many unofficial builds to choose from.
Since RR is based on LineageOS, it is available for most devices. It is very likely when we finally retire our Note 3 and move to another flagship, RR will be there for it.
Why Not Oreo?
Well, thread title says it all.
Credits and Thanks:
@vidwhal for the current RR build
@gj86 for Synergy kernel
@Jairus980 for Xenial kernel
@Hereiwas and @jcadduono for modems and bootloaders
@topjohnwu for Magisk
@stangri and @kantjer for Magisk unofficial daily beta builds
@Deic for the Safetynet fix Magisk module and @NovelliJack for finding the module
@MastahF and all other contributors that made the Open GApps project possible
Special thanks to @tarkzim for the RRN build used in initial setups.
and everyone else I forgot to mention.
>>>>>>> I know - screenshots below are from a previous setup. I will update then sometime in the future.
Rock Stable Setup
Using Resurrection Remix
Revision 11 - 11-Mar-2018
Phase 1 - Prepare for install
Here I am assuming you have a Windows PC. If not you will need to use google search to adapt my instructions to your available OS/hardware. The PC is only required for this phase.
1 - Samsung USB Driver:
Make sure you have the Samsung USB driver installed in your Windows PC.
If not download and install the latest driver:
- SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.65.0.exe
2 - Odin:
If you do not have Odin, get it here, unpack to any folder and create a shortcut pointing to Odin3 v3.09.exe.
There are newer versions of Odin, but they may have issues with our Note 3. Odin v3.09 is the one to use.
3 - TWRP
New to TWRP? Read this guide: TWRP: the complete guide to using Recovery on Android.
If you do not already have it, install TWRP 3.2.1-0. Download it from https://dl.twrp.me/hlte. More info here.
If you no not have TWRP installed download the .tar file and flash with Odin.
If you have an older version download the .img file and use your current TWRP to flash the image into recovery partition.
4 - Update Bootloader and Modem:
You have to install latest Nordic Countries Bootloader and Modem. I have prepared a "tar.md5" with both.
And yes, modem is not country or region dependent. Rest assured Nordic will work no matter where you are.
Get it from here: N9005_Nordic_XXUGPQB1-Modem_XXSGBQD1-Bootloader.tar.md5
Updating bootloader and modem is a must!
If you don't you may get the "SIM Card not detected" error and GPS fix will be slow or not work at all.
There are many sure ways to flash modem and bootloader so that they "stick". What always works for me is:
- Restart into Recovery (TWRP)
- Select Reboot->Power off
- Turn on directly into download mode by holding Down Arrow+Home+Power at the same time
- Connect phone to PC
- Flash with Odin using the AP slot
Now you should check if update was successful. The best way is to install the app Phone INFO, run it and select the Firmware tab. The correct Bootloader and Baseband (modem) above should be displayed. There is a screenshot in first post.
If the update did not work repeat the steps carefully until it does. You may, as a last resort, after powering off remove the battery, wait for about 30 seconds, reinsert the battery and then turn on directly into download mode.
Thanks to @Hereiwas for the files I have used in previous setups. Check out in his thread Bootloader and Baseband for SM-N9005.
If you need more info on flashing modems and bootloaders also take a look at @jcadduono thread [Direct Download] Latest Bootloaders & Modems.
PHASE 2 - Download the necessary installation files
1 - Resurrection Remix Nougat rom - thanks @vidwhal:
Download from here: RR-N-v5.8.5-20180101-hlte-Official-vidwhal.zip.
Please note that I am not the rom builder or developer. All credits go to @vidwhal and the RR Team.
This is the rom thread: [ROM][HLTE][UNOFFICIAL][OMS]Resurrection Remix N.
Please note this build may not be the latest available. The goal here is to have a stable rom that you will be able to use as a daily driver with no issues for a long time. Only after a lot of testing a new build makes into my setup.
I modified the zip to remove Magisk. This will make it easier to use newer or beta Magisk builds if necessary in the future. Remember Safetynet is a cat and mouse game and changes happen fast.
Special thanks to @tarkzim, who produced the RR builds used in earlier setups. He did a fantastic job of producing a very stable build without a Note 3 device for tests. His builds led me to create this thread.
2 - Magisk v16.0 Official - thanks @topjohnwu):
Magisk Installer: Magisk-v16.0.zip
Magisk Manager: MagiskManager-v5.6.1.apk (optional - you might need it in the future)
Magisk Uninstaller: Magisk-uninstaller-20180222.zip (optional - you might need it in the future)
if you decide to use newer builds do it at your own risk. I strongly recommend to keep these.
3 - Gapps:
Open Gapps Pico: open_gapps-arm-7.1-pico-20180311.zip
Not much to say here. Open GApps FTW.
Again the above build is the one I tested. Use this for a failproof installation, but feel free to use a newer build. Usually it will not be a problem.
I prefer Pico Gapps so I have the bare minimum as system apps. And I live by the KISS Principle. All other gapps I need are installed as user apps so I am allowed to use Titanium Backup to backup/restore them with data.
If you would rather use another Gapps package just pick the one you want. All packages should work but the Aroma. Aroma does not work in TWRP 3.
4 - Xenial Kernel - thanks @Jairus980:
Xenial Kernel: [Hlte][Xenial-b26x][02.01.18][N7.1-GSM].zip
Kernel thread: [Kernel][Xenial][Hlte].
With Xenial you have some fixes like the correct charging current in lock screen and working Gravity, Linear acceleration and Orientation sensors. Of course there is a lot more under the hood. If you plan to do some kernel tweaking Xenial offers more options.
If you do flash Xenial kernel do not report any bugs in RR thread. To report a bug you must first go back to stock kernel by dirty flashing RR and Magisk. If you are still able to reproduce the bug then you may post it in RR thread.
Even if there is a newer kernel release, you should keep using the build I posted here to have my tested stable setup.
Special thanks to @gj86 for his Synergy Kernel, used in my previous setup. It is also a great option.
5 - GPS Fix:
In this setup there is no need for a GPS fix. GPS is fast and rock stable as it should always have been.
But you really must update your modem to my recommend Nordic QB1 or GPS will be slow or not work at all.
Do not worry about your current location. The modem will work not matter where you are.
Latest RR builds somehow made GPS fix slower. I checked the gps.conf file and it is exactly the same as in previous builds.
I have my own optimized gps.conf, prepared originally for Marshmallow CM13, with a few more adjustments for Nougat.
After installing my gps.conf in latest RR build, gps fix is back to normal, taking only a few seconds.
I prepared a flashable zip to install my gps.conf. It saves existing gps.conf and put mine in its place.
Download it from here: Fix-GPS-for-hlte-la14.1-based-roms-v1.zip.
PHASE 3 - Backup!!
Now it is time to make backups of your current setup.
Use TWRP to make a nandroid backup. You will need it if something goes wrong. If you are paranoid like me make two and save them on your PC hard drive.
If you use Titanium make also a Titanium full backup. Remember that you should never restore system apps or settings. Use Titanium only to restore user apps and xml backups of wifi passwords, call log and sms messages.
The steps to install the new ROM will not erase your internal storage, but why not make a backup of everything to your PC or an OTG USB Drive.
PHASE 4: Install
- Make sure you have updated TWRP and your bootloader and modem as instructed in phase 1
- Make sure you have all files downloaded from phase 2 in your phone - preferably in external sdcard
- Make sure you have backups!!
- Reboot into Recovery (TWRP)
- Use advanced wipe to wipe System, Data and Cache
- Flash RR-N-v5.8.5-20180101-hlte-Official-vidwhal.zip
- DO NOT WIPE ANYTHING
- Reboot System (be patient - it will take a while, around 3-4 minutes)
- Pick your preferred launcher
- Check Settings->Date & Time and make sure it is ok
- Reboot into Recovery (TWRP)
- Flash [Hlte][Xenial-b26x][02.01.18][N7.1-GSM].zip
- Flash Magisk-v16.0.zip
- Flash open_gapps-arm-7.1-pico-20180311.zip (or the one you prefer)
- DO NOT WIPE ANYTHING
- Reboot System (this time it will be faster)
- Go to Settings->Accounts and add your google account
- Customize your other settings
- Run Magisk Manager and check if SafetyNet passes
- If not disable/reenable "Magisk Hide" option in Magisk Manager Settings and try again
- Restore/install apps/data
- PROFIT!
[Reserved]
wow, nice to see that someone using and "sharing" my builds
but a little tip for you, maybe you can ask me first before you post something are modified from me, no offense and i saw that includes my name on it.
just remind you and i think i will keep building this when i'm free, anyway, thank you for posing this. all good.
EDIT: also i think there is no need for removing magisk separately, it's fine for flashing newer magisk over the older one.
tarkzim said:
wow, nice to see that someone using and "sharing" my builds
but a little tip for you, maybe you can ask me first before you post something are modified from me, no offense and i saw that includes my name on it.
just remind you and i think i will keep building this when i'm free, anyway, thank you for posing this. all good.
EDIT: also i think there is no need for removing magisk separately, it's fine for flashing newer magisk over the older one.
Click to expand...
Click to collapse
Sorry, you are absolutely right.
Thanks for being cool with it.
The main point in changing the rom zip is removing the magisk manager system app. It is a little tricky for noobs to remove the system app to be able to install the v5 beta Magisk Manager.
And thanks again for making your fantastic RR build available.
Thank's for your work. I installed all, but then I had a problem. When I try to open settings/apps, it crashes everytime....
sperug said:
Thank's for your work. I installed all, but then I had a problem. When I try to open settings/apps, it crashes everytime....
Click to expand...
Click to collapse
This does not happen in my phones.
In my work phone I have 600+ apps installed. It takes a while to open but no crashes.
If you post a logcat I may be able to help.
I reinstalled everything, and before made a full wipe, also of the internal storage. And the problem was no more present! Wow! And thank you again...
I checked AFH and have 30+ downloads of installation files.
Any more success or failure cases? Please let me know.
This might be a silly question: You wrote I should download the latest NORDIC COUNTRY Bootloader and Modem.
Is this also correct if im not living in an other region or should I download the one from my Country? Thanks.
BobbyKa said:
This might be a silly question: You wrote I should download the latest NORDIC COUNTRY Bootloader and Modem.
Is this also correct if im not living in an other region or should I download the one from my Country? Thanks.
Click to expand...
Click to collapse
AFAIK it should work for you no matter where you are.
I live in Rio de Janeiro, Brasil and use it.
If it does not work for you just flash another one.
I tried the Nordic ones and everything seems to work. Not a killer but would be great: is there a way to get SPen functions inclidung Air Command? Thanks for the help.
BobbyKa said:
I tried the Nordic ones and everything seems to work. Not a killer but would be great: is there a way to get SPen functions inclidung Air Command? Thanks for the help.
Click to expand...
Click to collapse
To use Sammy Spen apps/features you need a Touchwiz based stock rom.
There are some apps with similar features for AOSP roms.
Many users say the best is SPenCommand developed by @emandt. It is paid but users say that the app is well worth the price.
Check the SPenCommand Google+ Comunity.
Great post. I don't see google assistant working, any clue?
Sent from my Pixel using Tapatalk
---------- Post added at 09:22 PM ---------- Previous post was at 09:10 PM ----------
Please ignore, I installed nano gapps and it worked
Sent from my Pixel using Tapatalk
what about battery life ?
has anyone tried this on Sprint Note 3 sm-n900p ?
svbarbosa said:
Check the SPenCommand Google+ Comunity[/URL].
Click to expand...
Click to collapse
I installed SPenCommand but the App doesn't open. When clicking the Icon nothing happens. Anyone knows about this Problem or knows another app for this?
Beside that everything (incl. Batterylife) seems great on this first day of testing.
I have followed your step to instal, wipe dalvik/art, system, data & chache. Flash ROM then reboot.
I got 'Could not do normal boot'.
Enter TWRP again and instal synergy kernel and reboot, I still got 'Could not do normal boot'.
My phone:
Samsung Galaxy Note 3 SM-N900S (Korea)
TWRP 2.8.7.0 hlteskt
CP N900SKSU0GPC5
BL N900SKSU0GPB1
sent from my Galaxy Note 3 using XDA Labs
BobbyKa said:
I installed SPenCommand but the App doesn't open. When clicking the Icon nothing happens. Anyone knows about this Problem or knows another app for this?
Beside that everything (incl. Batterylife) seems great on this first day of testing.
Click to expand...
Click to collapse
I have never used SPenCommand myself. Just read good things about it many times in other threads. Try to search and get help from people who are using it.
You may also check these apps: Note Buddy (S Pen Helper) and CM S Pen Add-on(ROOT).
And this guide on them: The Ultimate S Pen Customization Tool for Your Galaxy Note 3.
But be advised that I have no experience using these apps. Just found them using google.
opexblue said:
I have followed your step to instal, wipe dalvik/art, system, data & chache. Flash ROM then reboot.
I got 'Could not do normal boot'.
Enter TWRP again and instal synergy kernel and reboot, I still got 'Could not do normal boot'.
My phone:
Samsung Galaxy Note 3 SM-N900S (Korea)
TWRP 2.8.7.0 hlteskt
CP N900SKSU0GPC5
BL N900SKSU0GPB1
sent from my Galaxy Note 3 using XDA Labs
Click to expand...
Click to collapse
Sorry I can not be of help here. I only have the hlte N9005 international Note 3.
Maybe you could replace Synergy RC9 by a kernel that you are sure works with your N900S.
svbarbosa said:
Sorry I can not be of help here. I only have the hlte N9005 international Note 3.
Maybe you could replace Synergy RC9 by a kernel that you are sure works with your N900S.
Click to expand...
Click to collapse
Thank you for fast response. I will try other kernel.
Hey there, I own a Mi5S Plus with MIUI Stable 9.2.1 (based on Android 7.0).
For a bug that gives me a terrible battery drain (3 hours of screen usage tops) I decided to install Lineage OS 15.1.
I've got last version of TWRP (3.2.1-1), Unlocked bootloader, the phone has ben rooted.
As explained on the official guide:
- Factory reset with TWRP;
- Install *.zip file with last LOS update, positioned in /sdcard/
- Returns ERROR 7, I do exactly as suggested online
so:
- I delete “assert” strings from “updater-script” file and I zip it back up;
Here I have 2 different outcomes:
1) Invalid zip file format (I used both OSX and Win, using both native apps and third party ones);
2) Missing file “updater-binary” even if it is right in the zip.
What if, being the string after “assert” referring to a specific MIUI version, the problem is due to my installed MIUI version? It makes no sense, I know.
Here's what I'm talking about:
ui_print("Target: Xiaomi/natrium/natrium:6.0.1/MXB48T/V8.2.4.0.MBGCNDL:user/release-keys");
What should I do? I've tried them all!!!
I had the same problem installing the AospExtended 5.3 and I solved flashing the 8.1.4 modem.
Hello A7600-F Tablet owners, It's been awhile since there has been an updated ROM for this tablet. I have released ported ROMs for this tablet before, however they all had some annoying bugs and many of you reported issues with corrupted SD card partitions. The goal of this ROM is to provide as close to daily driver material for this old tablet as possible.
What better ROM than Resurrection Remix to do the job! :good:
Instructions:
Follow carefully! This process involves going back to STOCK firmware FIRST! This is to ensure your Internal storage gets properly formatted.
SAVE YOUR PERSONAL DATA! (Some where other than your tablet) You will lose it when flashing stock firmware. Don't worry about the struggles of getting ROOT on stock firmware, I have expedited the process greatly.
STEP 1: Get back to stock firmware. THIS STEP ERASES EVERYTHING, so save your data!!! Don't skip this step.
- Get any stock firmware file from here and follow the tutorial also in this link!
- The SP-Flash tool and drivers are all conveniently included with the firmware download.- Don't worry about taking the battery out when the tutorial says to.- If you have issues with the driver provided in the download, try these. (Run dpinst.exe) - Once completed boot into the new firmware just to ensure that you were successful. (Don't worry about going through initial setup we don't need it)
STEP 2: Install TWRP without root. You should now have a stock A7600-F Tablet, lets put TWRP back on.
- We will install TWRP with the same SP-Flash tool so that root is not required.
- Download the SP-Flashable TWRP image and scatter file from here.
- Follow the instructions in the tutorial linked in step 1 again but use the extracted TWRP scatter file you just downloaded instead of the stock firmware scatter file.
- You should only see "RECOVERY" listed in SP Flash Tool instead of all the stock partitions like last time - Once complete unplug the USB and use Vol-UP and Power buttons to get into TWRP
STEP 3: Wiping Instructions. THIS IS IMPORTANT! You should have TWRP installed and running at this point.
- DO NOT WIPE INTERNAL STORAGE! Doing so will cause the Corrupt SD-Card errors!
- Just don't do it! There is never any need to wipe internal storage on most devices.
- Go to Wipe -> Advanced Wipe
- Select only: Dalvik/Art Cache, System, Cache, and Data
- Wipe it.
STEP 4: Installing RR 7.1.2. You should now have an A7600-F with the stock partitions restored, and no ROM installed, sitting in the TWRP main menu.
- ROM Download: here
- GAPPS Download: here (Select Arm, 7.1, and whatever size you want)
- Now simply flash the ROM ZIP followed by the Gapps ZIP.
Reboot and Enjoy!
Things I improved over previous ROM PORTS:
- Better Audio quality
- Smoother Substratum OMS Support
- Camera Fixes
- FM Radio (Headphones only)
Kernel Source: here
Just yesterday I've dusted off this tablet, and so I was browsing the forums to see what rom I can put inside, and lickily, about the same time this thread was created! Installing it right now, gonna post a follow-up once I'm finished tinkering with it.
OK, firstly wanna thank you for this awesome rom, it's stable and fast, no major issue with it. What I did find, however, is that the camera flash is not working along with the night mode which is not turning on. Besides those two issues, everything seems to be in working order
Cheers!
LukaHM said:
OK, firstly wanna thank you for this awesome rom, it's stable and fast, no major issue with it. What I did find, however, is that the camera flash is not working along with the night mode which is not turning on. Besides those two issues, everything seems to be in working order
Cheers!
Click to expand...
Click to collapse
Thanks for the report.
Camera flash? My A7600 Does not have a flash. No actual LED to produce a flash.
As for the Night mode, I have ported a lot of ROMS to this device and I havn't ever seen the night mode work right. If I even do get it to turn on, it lags the whole device.
SaberShip said:
Thanks for the report.
Camera flash? My A7600 Does not have a flash. No actual LED to produce a flash.
As for the Night mode, I have ported a lot of ROMS to this device and I havn't ever seen the night mode work right. If I even do get it to turn on, it lags the whole device.
Click to expand...
Click to collapse
Haha, I've turned the damn thing over, looked at the sensor, and you're right. Havent actually used this device previously to know about it, so glad we have that one sorted out!
Thanks SaberShip. The ROM works great for general use and apps but I'm having an issue downloading files. It says SD card not found Download to default folder. I attempt to download to Downloads folder where it says I have 10.43gb stroage available but it keeps telling me SD card not found. I don't use an SD card for storage on the device. Do I need to use one or can you offer any other advice? I've carefully gone through above installation steps 3 times.
---------- Post added 08-02-2019 at 12:38 AM ---------- Previous post was 07-02-2019 at 11:57 PM ----------
caoiveen said:
Thanks SaberShip. The ROM works great for general use and apps but I'm having an issue downloading files. It says SD card not found Download to default folder. I attempt to download to Downloads folder where it says I have 10.43gb stroage available but it keeps telling me SD card not found. I don't use an SD card for storage on the device. Do I need to use one or can you offer any other advice? I've carefully gone through above installation steps 3 times.
Click to expand...
Click to collapse
So I put in an sd card and I then had option to save to downloads or sd. I still could not select downloads but I could select sd card which is worrying for me now. Thanks again Sabership. Nice work
caoiveen said:
Thanks SaberShip. The ROM works great for general use and apps but I'm having an issue downloading files. It says SD card not found Download to default folder. I attempt to download to Downloads folder where it says I have 10.43gb stroage available but it keeps telling me SD card not found. I don't use an SD card for storage on the device. Do I need to use one or can you offer any other advice? I've carefully gone through above installation steps 3 times.
---------- Post added 08-02-2019 at 12:38 AM ---------- Previous post was 07-02-2019 at 11:57 PM ----------
So I put in an sd card and I then had option to save to downloads or sd. I still could not select downloads but I could select sd card which is worrying for me now. Thanks again Sabership. Nice work
Click to expand...
Click to collapse
What app are you using? I have not seen any issues with downloading yet. If you see 10.43Gb it sounds like your internal storage is formatted correctly. I haven't seen any download issues with Firefox and ES-File Explorer.
Unable to flash firmware - because unable to install Android USB driver on Windows 10
Thank you for the new firmware. However, the instructions to install the Android USB driver in smartphone flash tool (link below) the link below does not work.. There is a signature error and everyone (as per youtube video comments) is having same problem.
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Pls advise.
D2sx34 said:
Thank you for the new firmware. However, the instructions to install the Android USB driver in smartphone flash tool (link below) the link below does not work.. There is a signature error and everyone (as per youtube video comments) is having same problem.
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Pls advise.
Click to expand...
Click to collapse
Main post updated with signed drivers. Please try it now.
Thank you @SaberShip!
The installation of Resurrection Remix 5.8.5 was successful after installing the signed Android USB driver!. System is stable and fast. Thank you again.
App issues:
1. Netflix app (not available on playstore, but at netflix web site) works online, but does not allow video downloads.
Netflix diagnostic error for download is OF.NA.4 -which probably means device does not meet security requirements. ? any workarounds?
// Amazon Prime video works, with offline video downloads as well. Google chrome works. Tried other apps as well.
Documentation issues (minor):
1. "- GAPPS Download: here (Select Arm, 7.1, and whatever size you want)" --> Google Apps Super package did not install since the device ran out of space (error 70). Google Apps "Nano" worked.
System issues:
1. Wifi still does not auto-reconnect after Wireless Access Point is rebooted, but given that this has happened with different ROMs I am concluding it is due to a hardware issue with this device (and not ROM specific).
// Skype camera issue fixed. Camera image is NO longer upside down.
D2sx34 said:
Thank you for the new firmware. However, the instructions to install the Android USB driver in smartphone flash tool (link below) the link below does not work.. There is a signature error and everyone (as per youtube video comments) is having same problem.
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Pls advise.
Click to expand...
Click to collapse
Netflix app not working on ROM due to Widevine DRM
Great job on the ROM!! - it is fast and stable.
I have been investigating why the <latest> Netflix app with offline download capability does not work with Resurrection Remix 5.85 ROM.
I found that some other ROM has similar problem, and it was caused because Widevine DRM was not supported. Netfix (latest app and offline download) started working after Widevine DRM support was added to that ROM.
Is it possible to support Widevine DRM in this ROM?
Here is the quote from another ROM:
"Quote:
Originally Posted by Federek
I recently found out the reason why after opening the Netflix app it shows the error "this app is not compatible with your device". The only workaround right now is to download an old APK directly from Netflix website (it doesn't support the feature of downloading movies). After some digging, I'm pretty sure the error is due to the fact that on, I think any Oreo rom available for bacon, Widevine Drm is not supported (as u can see in the screenshot below). I think it's connected to the files in the screenshot below, but I didn't manage to find a solution. I believe it must be implemented by someone directly in the rom code (I'm absolutely not an expert). I'm also sure it's not connected with root or anything else (the Netflix app is available in the play store for me).
(sorry is my first post)
[/IMG]"
SaberShip said:
Hello A7600-F Tablet owners, It's been awhile since there has been an updated ROM for this tablet. I have released ported ROMs for this tablet before, however they all had some annoying bugs and many of you reported issues with corrupted SD card partitions. The goal of this ROM is to provide as close to daily driver material for this old tablet as possible.
What better ROM than Resurrection Remix to do the job! :good:
Instructions:
Follow carefully! This process involves going back to STOCK firmware FIRST! This is to ensure your Internal storage gets properly formatted.
SAVE YOUR PERSONAL DATA! (Some where other than your tablet) You will lose it when flashing stock firmware. Don't worry about the struggles of getting ROOT on stock firmware, I have expedited the process greatly.
STEP 1: Get back to stock firmware. THIS STEP ERASES EVERYTHING, so save your data!!! Don't skip this step.
- Get any stock firmware file from here and follow the tutorial also in this link!
- The SP-Flash tool and drivers are all conveniently included with the firmware download.
- Don't worry about taking the battery out when the tutorial says to.
- If you have issues with the driver provided in the download, try these. (Run dpinst.exe) - Once completed boot into the new firmware just to ensure that you were successful. (Don't worry about going through initial setup we don't need it)
STEP 2: Install TWRP without root. You should now have a stock A7600-F Tablet, lets put TWRP back on.
- We will install TWRP with the same SP-Flash tool so that root is not required.
- Download the SP-Flashable TWRP image and scatter file from here.
- Follow the instructions in the tutorial linked in step 1 again but use the extracted TWRP scatter file you just downloaded instead of the stock firmware scatter file.
- You should only see "RECOVERY" listed in SP Flash Tool instead of all the stock partitions like last time - Once complete unplug the USB and use Vol-UP and Power buttons to get into TWRP
STEP 3: Wiping Instructions. THIS IS IMPORTANT! You should have TWRP installed and running at this point.
- DO NOT WIPE INTERNAL STORAGE! Doing so will cause the Corrupt SD-Card errors!
- Just don't do it! There is never any need to wipe internal storage on most devices.
- Go to Wipe -> Advanced Wipe
- Select only: Dalvik/Art Cache, System, Cache, and Data
- Wipe it.
STEP 4: Installing RR 7.1.2. You should now have an A7600-F with the stock partitions restored, and no ROM installed, sitting in the TWRP main menu.
- ROM Download: here
- GAPPS Download: here (Select Arm, 7.1, and whatever size you want)
- Now simply flash the ROM ZIP followed by the Gapps ZIP.
Reboot and Enjoy!
Things I improved over previous ROM PORTS:
- Better Audio quality
- Smoother Substratum OMS Support
- Camera Fixes
- FM Radio (Headphones only)
Click to expand...
Click to collapse
SaberShip, thank you for all your work and caring about the A7600-F! Your instructions are clean and elegant. It's great to be able to install your ROM without root. It looks and performs great.
I installed your ROM a week ago. Unfortunately, I've spent much time since then trying to get NordVPN to work. It worked fine on the stock version of my tablet. Now, it connects to NordVPN servers, but fails to adopt the remote IP address (whatismyv6.com reports my ISP IP).
I've exhausted [email protected] I'd be grateful for any pointers you might have.
Hello,
so i will thank Sabership, too, for his new build. I went the way as most builds are normally flashed - reboot from AIM build into TWRP, did a factory reset, and flashed RR and a new GApps build. Everything went fine, i am just typing on it. The bug with WiFi not connecting automatically i am hoping will be gone, it was the only bug i found in AIM for me.
One question: the security patch date is of November 2017. Will there be an update (as asked in AIM, too)?
Regards
jfaheyfan said:
SaberShip, thank you for all your work and caring about the A7600-F! Your instructions are clean and elegant. It's great to be able to install your ROM without root. It looks and performs great.
I installed your ROM a week ago. Unfortunately, I've spent much time since then trying to get NordVPN to work. It worked fine on the stock version of my tablet. Now, it connects to NordVPN servers, but fails to adopt the remote IP address (whatismyv6.com reports my ISP IP).
I've exhausted [email protected]. I'd be grateful for any pointers you might have.
Click to expand...
Click to collapse
I believe VPN connectivity may have been one of the issues with the original ROM even before I ported it to the A7600F. Therefore, there isn't much I can do unfortunately.
If you absolutely need VPN, your options are to use Stock ROM or find a different ROM that has VPN working. Another possible workaround is to setup NordVPN on your router or whatever gateway is between you and the internet: https://support.nordvpn.com/Connectivity/Router/1047409322/Setting-up-a-router-with-NordVPN.htm
Catfish78 said:
Hello,
so i will thank Sabership, too, for his new build. I went the way as most builds are normally flashed - reboot from AIM build into TWRP, did a factory reset, and flashed RR and a new GApps build. Everything went fine, i am just typing on it. The bug with WiFi not connecting automatically i am hoping will be gone, it was the only bug i found in AIM for me.
One question: the security patch date is of November 2017. Will there be an update (as asked in AIM, too)?
Regards
Click to expand...
Click to collapse
I have witnessed wifi disconnection issues on every ROM I've ever ported/used for this device aside from Stock I wish there was more that I could do. As mentioned in the title and before, this ROM is ported from another device. What this means is that I don't have the source code and therefore cannot update things like Android security patch dates. If this were a ROM built from source, I would simply have to sync with updated RR sources to get the new patches and RR bugfixes/features. To do it with a port, I need to find a whole new ROM with the updated sources and then port the whole ROM over to this device again. That is just too much work.
As a side note, I had intended this to be the last ROM I ported for this device due to its age, however If there is enough demand and I can find one, maybe someday I will port a more updated Oreo ROM to this device. Good quality MT6582 Oreo ROMs built from source are still not really common.
SaberShip said:
I believe VPN connectivity may have been one of the issues with the original ROM even before I ported it to the A7600F. Therefore, there isn't much I can do unfortunately.
If you absolutely need VPN, your options are to use Stock ROM or find a different ROM that has VPN working. Another possible workaround is to setup NordVPN on your router or whatever gateway is between you and the internet: https://support.nordvpn.com/Connectivity/Router/1047409322/Setting-up-a-router-with-NordVPN.htm
I have witnessed wifi disconnection issues on every ROM I've ever ported/used for this device aside from Stock I wish there was more that I could do. As mentioned in the title and before, this ROM is ported from another device. What this means is that I don't have the source code and therefore cannot update things like Android security patch dates. If this were a ROM built from source, I would simply have to sync with updated RR sources to get the new patches and RR bugfixes/features. To do it with a port, I need to find a whole new ROM with the updated sources and then port the whole ROM over to this device again. That is just too much work.
As a side note, I had intended this to be the last ROM I ported for this device due to its age, however If there is enough demand and I can find one, maybe someday I will port a more updated Oreo ROM to this device. Good quality MT6582 Oreo ROMs built from source are still not really common.
Click to expand...
Click to collapse
Thanks for your answer. If only i could do something like that of my own... i have so much interests, i don't know if i could learn that in a usefull time!
By the way, why did you call it "old"? i'm using the Galaxy S2 build 2011, with LineageOS 16. I think this is an old device , like my Galaxy Tab 1 and 2.
But anyway, thanks for your work. After some time i'll write again about issues i found, if it will be helpful.
Regards
Thank you, SaberShip. It's been on my list to get a DD-WRT enabled router, so maybe now's the time.
I've had no problems with WiFi.
If you build an updated Oreo ROM, I volunteer to test it. I'm fond of my A7600-F.
SaberShip said:
Hello A7600-F Tablet owners, It's been awhile since there has been an updated ROM for this tablet. I have released ported ROMs for this tablet before, however they all had some annoying bugs and many of you reported issues with corrupted SD card partitions. The goal of this ROM is to provide as close to daily driver material for this old tablet as possible.
What better ROM than Resurrection Remix to do the job! :good:
Instructions:
Follow carefully! This process involves going back to STOCK firmware FIRST! This is to ensure your Internal storage gets properly formatted.
SAVE YOUR PERSONAL DATA! (Some where other than your tablet) You will lose it when flashing stock firmware. Don't worry about the struggles of getting ROOT on stock firmware, I have expedited the process greatly.
STEP 1: Get back to stock firmware. THIS STEP ERASES EVERYTHING, so save your data!!! Don't skip this step.
- Get any stock firmware file from here and follow the tutorial also in this link!
- The SP-Flash tool and drivers are all conveniently included with the firmware download.
- Don't worry about taking the battery out when the tutorial says to.
- If you have issues with the driver provided in the download, try these. (Run dpinst.exe)
- Once completed boot into the new firmware just to ensure that you were successful. (Don't worry about going through initial setup we don't need it)
STEP 2: Install TWRP without root. You should now have a stock A7600-F Tablet, lets put TWRP back on.
- We will install TWRP with the same SP-Flash tool so that root is not required.
- Download the SP-Flashable TWRP image and scatter file from here.
- Follow the instructions in the tutorial linked in step 1 again but use the extracted TWRP scatter file you just downloaded instead of the stock firmware scatter file.
- You should only see "RECOVERY" listed in SP Flash Tool instead of all the stock partitions like last time
- Once complete unplug the USB and use Vol-UP and Power buttons to get into TWRP
STEP 3: Wiping Instructions. THIS IS IMPORTANT! You should have TWRP installed and running at this point.
- DO NOT WIPE INTERNAL STORAGE! Doing so will cause the Corrupt SD-Card errors!
- Just don't do it! There is never any need to wipe internal storage on most devices.
- Go to Wipe -> Advanced Wipe
- Select only: Dalvik/Art Cache, System, Cache, and Data
- Wipe it.
STEP 4: Installing RR 7.1.2. You should now have an A7600-F with the stock partitions restored, and no ROM installed, sitting in the TWRP main menu.
- ROM Download: here
- GAPPS Download: here (Select Arm, 7.1, and whatever size you want)
- Now simply flash the ROM ZIP followed by the Gapps ZIP.
Reboot and Enjoy!
Things I improved over previous ROM PORTS:
- Better Audio quality
- Smoother Substratum OMS Support
- Camera Fixes
- FM Radio (Headphones only)
Click to expand...
Click to collapse
Does usb otg work?
thierry_w said:
Does usb otg work?
Click to expand...
Click to collapse
Just tested, It works perfectly with my USB wireless Keyboard and mouse combo.
When I tried a USB flash drive it did not mount automatically, however "SDA" does appear in the /dev/block/ directory so you can likely mount the flash storage manually with some terminal commands. YMMV
USB OTG works with both my wired and wireless trackballs (Logitech).
I mount/unmount flash drives with StickMount and explore them with Total Commander.
excellent. Works very well