Quick question all,
I was previously on B145 then upgraded to B148. I didn't like and tried to go back B145 and failed. (Before researching through the forum), I took it to flash B300 firmware and was successful but stuck for more than a week trying to figure how to get out of it. Flashing KK never worked (or so I thought), so I decided to try B324...turns out, it flashed and I was on 5.1.1 C900B324. Then I tried B327 and worked for that as well. Now I'm back to B324 and want to go back to B145.
I've been reading around to start at B127 and work up from there, but no KK firmware seems to work at all...some firmwares process, but fail at 19% and some at 90%, others fail at the very start.
Now, was my mistake done when I flashed B300 while still on KK B148? Or, after flashing so many firmwares with adb/fastboot? fyi, whenever I flashed a firmware...I did (Boot.img, Recovery.img, Cache.img, Cust.img, System.img and Userdata.img)...should I have not flashed some of these images when trying to downgrade? Still looking to downgrade back to B145 presently, although there is many cool features of LP.
All the help is appreiciated.
Thanks!
jfer671
Flash b324 then flash b300 from Italy then flash 137sp03 and then flash b145
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
I think I've tried this and all other avenues, but I'll give it a go once more.
Okay, so is this B300 the (Rollback 5.1 to 4.4)? Or (Downgrade C900B308)? Also, after the correct transition to 300, which img(s) of 137SP03 do I flash and also for B145?
I've been accustomed to flashing Boot/Recovery/Cust/System/Cache & Userdata images...should there be specific images to flash in each for 137 and 145?
Thanks for the feedback!!
Flash using 3 bottom and must work
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
chudy_85 said:
Flash using 3 bottom and must work
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
I'll try this out and hopefully all goes as planned
chudy_85 said:
Flash using 3 bottom and must work
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
Ok, just as I mentioned before.
I can transition down to B300 from B324. Extract Update.app from B137SP03 and force by 3 buttons; it loads up to 19% and then fails after. I've repeated like 5x already with same results.
I also put the unextracted B137SP03 file into dload and tried 3 button but same Failed results.
Any other ideas? fyi, my bootloader is unlocked as well.
Read this topic and try repair you phone.
Here it's the link
http://forum.xda-developers.com/showthread.php?t=3192839
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Related
Does anybody knows how to root my mate with b331 firmware? Where can i find a guide step by step to root my mate to put out the folder to increase the volume which is very low.
Unlock bootloader then flash twrp for lp and then flash supersu.zip
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
chudy_85 said:
Unlock bootloader then flash twrp for lp and then flash supersu.zip
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
I unlocked the bootloader but i cant flash twrp.where can i find the files twrp and supersu? could you pls tell me step by step how to flash twrp?
depeche3 said:
I unlocked the bootloader but i cant flash twrp.where can i find the files twrp and supersu? could you pls tell me step by step how to flash twrp?
Click to expand...
Click to collapse
Her you have twrp
http://forum.xda-developers.com/showthread.php?p=64127308
And her you have supersu.zip for twrp
https://download.chainfire.eu/696/supersu/
Do It that.
Enable debugging USB in setting
Then use twrp to install
When it's install copy supersu.zip to sdcard
Go to twrp and find supersu.zip and flash
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
I discovered something interesting.
Bootlogos from oneplus one works for our mi4c.
You can use this tool to make your own:
http://forum.xda-developers.com/oneplus-one/themes-apps/mod-customize-ones-bootlogo-t2857153
To flash it :
splash logo:
Code:
fastboot flash bk2 logo.bin
fastboot logo :
Code:
fastboot flash logo logo.bin
For both displayed is opo splash logo, so you must make separate files for splash and fastboot logo.
Enjoy !
Also feel free to share your logos.
Mi4c original logos attached below
nice
So we can get rid of the Mi logo? Would be nice to have Android logo like most phones I.e. Samsung s6&7
Potentially yes, we only need PNG of it.
Wysłane z mojego Mi-4c przy użyciu Tapatalka
How safe is it to flash this?
I tested it, and it worked. Done in 4 seconds.
can I flash by phone only?
no pc available for right now...
Try dd via terminal or make for flashable zip
Wysłane z mojego Mi-4c przy użyciu Tapatalka
AndropaX said:
Try dd via terminal or make for flashable zip
Wysłane z mojego Mi-4c przy użyciu Tapatalka
Click to expand...
Click to collapse
hi @AndropaX
me as a noob, i'm afraid it can bricked my phone...
as the OP http://forum.xda-developers.com/oneplus-one/themes-apps/mod-customize-ones-bootlogo-t2857153
said, don't used out of dated
and it confusing me
can you please explain in detail step by step how to change bootlogo
thank you
ps. i have flashed your google bootlogo in RR Rom, and it works :good:
but, i'm can't make my own :crying::crying:
This apply only for oneplus one, where this causes bricks on lollipop bootloader, we have mi4c, so don't worry...
Wysłane z mojego Mi-4c przy użyciu Tapatalka
@AndropaX
thanka you mate, its works like a charm
:good:
@AndropaX is there a way to flash the boot logo only and not fastboot logo? Because when using the tool, it seems it combines both into one .bin file?
I've attached the image I want to use
This tool is made for oneplus one, which has splash and fastboot logo in one partiton, mi4c has separate partitions for it. So simple ignore fastboot.png
#GETRESURRECTED
Just made this and added the powered by android to make it like other phones. Added a preview and the boot if anyone wants to try it
Nougat bootloader
Can I flash in on nougat bootloader
any idea why am I getting error something about max. storage when trying to flash logo and end up with no success? device is seen properly through fastboot devices, it used to work in past, not sure what is issue now
running official LOS 14.1 with newest firmware for it
EDIT: never mind, on the other try it worked fine, but still would prefer to know how to make flashable ZIP so I don't have to use PC next time
AndropaX said:
This tool is made for oneplus one, which has splash and fastboot logo in one partiton, mi4c has separate partitions for it. So simple ignore fastboot.png
#GETRESURRECTED
Click to expand...
Click to collapse
Does this tool work on nougat? And how do I create my own bootlogo?
Is it possible to downgrade from B560 to B331 ?
I already tried Hard reset but it stucks on Huawei Screen and if I try it over the Software Upgrade function (with dailer code), it always brings me to my TWRP Recovery but nothing happens.
Any solutions for Downgrading back?
Flash stock recovery for b560
Flash downgrade pack
Flash full b331
All this file you have in my topic with firmware
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
chudy_85 said:
Flash stock recovery for b560
Flash downgrade pack
Flash full b331
All this file you have in my topic with firmware
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
What Packs should I take? I have Europe Mate 7.
xBiOTeCHx said:
What Packs should I take? I have Europe Mate 7.
Click to expand...
Click to collapse
1st download this tool
https://mega.nz/#!9kBWnY7T!ybhARn5UNXAyxrdQZ1ytKks24eCyzxkgdVhEza6zwFQ
put your phone in fastboot mode
open this tool & flash Stock Marshmallow Recovery
Restart phone
Download this downgrade package
https://drive.google.com/file/d/0BzKA9jiieekaTGhyVW9lcW9sb3c/view
extract update.app and copy in dload then start update
if your phone is TL10 download this file : https://mega.nz/#!4hQGUS6b!89ntJ_iq1NfYScSJnv6LMVfB_cJFLXSkCcN1uVG25Y8
if your phone TL09 download this file: https://mega.nz/#!4sAG0aaR!ZA_LqkBq6U56fZ3Owh2IIWtDL1bKfKoDHBkjCiy35j4
and install it
Is it possible to downgrade from B560 to B331 ? i have Middle East Mate 7
Hi, help please! so I'm getting an 'internal problem with device- please contact your manufacturer' on boot before lockscreen.
This is after the usual bootloader warning.
What have I corrupted exactly?? I went to LOS and back to 5.1.9...
Magisk?
Wysłane z mojego ONEPLUS A6000 przy użyciu Tapatalka
add_pl said:
Magisk?
Wysłane z mojego ONEPLUS A6000 przy użyciu Tapatalka
Click to expand...
Click to collapse
What about it?
Custom recovery. You don't have to worry about that message.
the.Great.Skua said:
Hi, help please! so I'm getting an 'internal problem with device- please contact your manufacturer' on boot before lockscreen.
This is after the usual bootloader warning.
What have I corrupted exactly?? I went to LOS and back to 5.1.9...
Click to expand...
Click to collapse
This screen is being caused by the flashing of the wrong version of Magisk. Uninstall Magisk, then flash Magisk 16.4
I had that as well and to fix it I did the following (running magisk 16.7 without twrp).
1) uninstall -> restore images
2) selected Preserve AVB 2.0/dm-verity
3) install -> direct install
4) reboot
No more message and also after doing this the backups started working again under my google account.
I solved the problem bij using Oxygen updater from the playstore. Reinstalling the last update solved the case.
So as the title goes i'd like to go back to stock with root. I dont know what happened but i downloaded the OTA and install when boot. To. Recovery i encountered "error 7". Can anybody help me fix this. Am happy with stock rom and kernel with magisk.
Bump
You must install Old Twrp 3.0.1
Wysłane z mojego RNE-L21 przy użyciu Tapatalka
I agree, is a recovery problem!
Which version of twrp recovery are you using?