Several sleeve reviews with pics - Nexus 6P Accessories

Hey all, thought I'd post a few quick reviews of some sleeves I ordered from Amazon. I've always preferred to keep my devices naked in hand, but protected in my pocket.
First up is the Rustic Leather iPhone 6 Plus Sleeve Handmade by Hide & Drink :: Guatemalan Cacao - $9.99 at time of review
Pros:
Cheap
Excellent Quality
Great Protection
Very Attractive
Can Charge Phone While In Case
Cons:
Adds A Slight Amount Of Width
I was very pleasantly surprised with the quality of this case when I opened the package. For $10, this sleeve is an absolute no brainer. Honestly, I'd consider it a bargain at two to three times the price. I'm pretty sure I paid $50 for a similar iPod Touch case from Saddleback Leather a few years ago. This product is very comparable, but uses a thinner piece of leather. The Saddleback case was very rigid, which was good and bad. Good in that it was very protective, bad in that it was very bulky in the pocket. I'd actually say this case is a better product because of the thinner leather. It's certainly not skimpy by any means, and I think it's a better compromise of protection vs bulk.
As you can see from the product name, it was designed for the iPhone 6 Plus, but as you can also see from the pics, it's a perfect fit for the Nexus 6p. Very tight to slide the phone in, but fairly easy to remove because of the cutout at the bottom.
Highly Recommended
================
Next up is the xhorizon TM Dark Elastic Neoprene Absorbing Pouch Case Cover ZY for 5.5 inch iPhone 6 Plus - $6.49 at time of review
Pros:
Super Cheap
Decent Protection
Keeps Screen Clean
Slim In The Pocket
Cons:
Less Protective
There's not a whole lot to say about this simple Neoprene case, other than that it does its job well. The Nexus 6p fits perfectly inside and remains fairly snug, requiring a bit of a tug to remove. Nothing significant really, but you don't have to worry about your phone just falling out of this case. As you can see in the pics, the back of the case is slightly taller than the front, which offers a bit of added protection for the top of the phone.
Another nice feature of this case is that the Neoprene does a great job of cleaning the screen as you slide the phone in and out of the case. This became especially apparently when I switched from this case to the leather case above. All of a sudden my screen seems peppered with little dots of lint that I hadn't noticed before.
Protection from this case will be mostly limited to scratches and scuffs from the detritus in your pocket. It may help pad the device in the event of a short fall, but I certainly wouldn't depend on it. For my purposes, though, I find it to be a great case.
Recommended
================
Third is the Synthetic Leather iPhone 6 Plus and 6S Plus Sleeve - Slightly Padded Microfiber Lined Executive Professional Synthetic Leather Case by Dockem (Dark Brown) - $9.99 at time of review
Pros:
Slim
Cons:
Unattractive
Creased
This was the first sleeve I ordered for my Nexus 6p and based on the 4.7 out of 5 star average Amazon review (out of 29 reviews!), I had fairly high expectations. This was probably one of the most disappointing items I've received in more than a decade of shopping at Amazon. As you can see in the last pic, it's a very flimsy, thin sleeve. The one I received has a very ugly crease through the middle of it, which was not caused by shipping as it was in a box laying flat with one other item and several inflatable pockets of cushioning.
The Nexus 6p does fit in the case, but it's a pretty tight fit. It's a little more difficult to extract the phone than I expected, but it is manageable with the slot cut out of the top. Not sure what else to say really, I hate this one.
Definitely Not Recommended
================
Last is the SOSAM 2Xpack Microfiber Sleeve Pouch Cover CasePouch For iphone 5 5S /iphone 6 6plus , Samsung HTC ONE / Blackberry Z10 Mini Wallet Purse Hand Bag Cloth Coin Cell Phone Bag Mobile Pouch (Black) - $8.00 at time of review
Pros:
Dirt Cheap
External Pocket
You Get Two?
Cons:
Major Lint Collector
Weird Clasp
You Get Two
At least with this case, I wasn't expecting much. With an effective cost of $4 each, how good can they be? Well, let's just put it this way, I want my $8 back. I have two dogs, and as soon as I opened this package, dog hair was immediately sucked from throughout my house to the felt of this pouch. You'd have thought these things were made by Dyson! On the positive side, the Nexus 6p fits fairly well into this case with a bit of extra room on the sides. The top is another matter though, the device protrudes a few millimeters from the top edge of the pouch. The unwieldy closure is a pain to use and despite the manufacturer's description of a drawstring closure, neither of mine function in that manner. You have to feed the longer string (with the bead) through the shorter string which catches on the bead to keep the pouch closed. Not very innovative and not really that functional.
About the only positive thing I have to say about this case is that it sports an external slot/pocket where you could store a pair of earbuds or a few bucks. Don't waste your money.
Absolutely NOT Recommended
================
I'm still waiting for my fitBAG Beat White custom tailored sleeve for Huawei Nexus 6P. Fine nappa leather pouch with integrated microfibre lining for display cleaning to arrive from Germany. I'll update this post when I receive it.

Do you think the phone would fit in any of these if it has a slim case on it?

Only the Sosam, which I really wouldn't recommend.

911jason said:
Only the Sosam, which I really wouldn't recommend.
Click to expand...
Click to collapse
That's too bad. I would love to find one that can handle a slim case. I need it to put my phone in when I stick it in my backpack prior to going through airport security.
Thanks for these reviews - VERY helpful!

Related

Poetic Revolution S4 case

http://www.amazon.com/Poetic-REVOLU..._20?s=wireless&ie=UTF8&qid=1369583887&sr=1-20
Anyone grab this one yet? Curious how well it fits, and how well it works with the glass screen protectors. Looks very durable, and I know that their tablet versions are highly respected.
I got the poetic atmosphere from amazon for 6.95 (it's now 8.95) and I love it.
Fits great and I love that that you can still see the back of the phone somewhat. Although it says clear it's really more smokey and best of all it's light and keeps the phone thin
bkrickles said:
I got the poetic atmosphere from amazon for 6.95 (it's now 8.95) and I love it.
Fits great and I love that that you can still see the back of the phone somewhat. Although it says clear it's really more smokey and best of all it's light and keeps the phone thin
Click to expand...
Click to collapse
Appreciate the reply, but that case is a very different animal compared to the Revolution.
dh350nwo said:
http://www.amazon.com/Poetic-REVOLU..._20?s=wireless&ie=UTF8&qid=1369583887&sr=1-20
Anyone grab this one yet? Curious how well it fits, and how well it works with the glass screen protectors. Looks very durable, and I know that their tablet versions are highly respected.
Click to expand...
Click to collapse
Probably late to the party, but here is my Amazon review:
3/5 Stars -
After spending approximately 2 weeks searching and deliberating for a Galaxy S4 case, I settled on purchasing the Poetic Revolution. I was drawn to the Poetic Revolution because it combines a sturdy outer shell with a built-in screen protector/cover. This is a rugged case which will no doubt keep your expensive piece of technology safe from minor accidents, moisture, tumbles and scratches.
I also have to admit that I like Poetic's brand logo; maybe I've been watching too much Game of Thrones.
Being under $20 at the time of purchase made this buy a bargain, compared to similarly designed S4 cases.
It's important to note that, while this case is a value, it's not perfect.
1. It's difficult to keep clean. the TPU/rubberized plastic body is something of a lint magnet. Depending on the surface or pocket your device is in, it picks up white flecks very easily and can be a little challenging to clean with just a simple finger wipe. Likewise, the screen cover (not being directly attached to the phone's screen) has a tendency to capture dust underneath it. The plastic below my home button has become a minor haven of dust.
2. The belt clip is almost useless. Part of my initial draw to this case was I was looking for something with a kickstand, and thought this might be a viable alternative for something portable. The reality is the included belt clip is unwieldy to use when attached to an actual belt or pocket, and the attachment mechanism (using tension to clip to the top and bottom of the phone), seems very prone to breakage over time. Likewise, to actual utilize the belt clip as a kick stand, you have to lug it around. Personally, I prefer my device sans kickstand, so I haven't found myself using it.
oblivion0 said:
Probably late to the party, but here is my Amazon review:
3/5 Stars -
After spending approximately 2 weeks searching and deliberating for a Galaxy S4 case, I settled on purchasing the Poetic Revolution. I was drawn to the Poetic Revolution because it combines a sturdy outer shell with a built-in screen protector/cover. This is a rugged case which will no doubt keep your expensive piece of technology safe from minor accidents, moisture, tumbles and scratches.
I also have to admit that I like Poetic's brand logo; maybe I've been watching too much Game of Thrones.
Being under $20 at the time of purchase made this buy a bargain, compared to similarly designed S4 cases.
It's important to note that, while this case is a value, it's not perfect.
1. It's difficult to keep clean. the TPU/rubberized plastic body is something of a lint magnet. Depending on the surface or pocket your device is in, it picks up white flecks very easily and can be a little challenging to clean with just a simple finger wipe. Likewise, the screen cover (not being directly attached to the phone's screen) has a tendency to capture dust underneath it. The plastic below my home button has become a minor haven of dust.
2. The belt clip is almost useless. Part of my initial draw to this case was I was looking for something with a kickstand, and thought this might be a viable alternative for something portable. The reality is the included belt clip is unwieldy to use when attached to an actual belt or pocket, and the attachment mechanism (using tension to clip to the top and bottom of the phone), seems very prone to breakage over time. Likewise, to actual utilize the belt clip as a kick stand, you have to lug it around. Personally, I prefer my device sans kickstand, so I haven't found myself using it.
Click to expand...
Click to collapse
Nope, not late at all. Enjoyed the review and it pushed my decision to avoid buying this case at this time.
it's just me... but looks like a coffin

Video review of 4 cases

(with a kinda drop test)
s line case, Nillkin Amazing Armor Bumper,Samsung protective cover+
http://youtu.be/94QtQB9x2CE?list=UUACeOFuBKLUX5JzaYFqAwWQ
Thanks for the reviews...in regard to the Nillkin case/bumper...I only found sellers in China on eBay...you know of any US sellers or Amazon sellers? I checked both but didn't find anything...thanks!!
Yes your correct I purchased it from a China supplier via eBay. It took a couple of weeks to arrive but overall good value for money.
I have two of the 3 main cases reviewed in same colors. The Samsung protective case fits better than the Nillkin. The Nillkin required some excess removal around the USB and mics to fit without slightly pulling away from bezel near the home button and allowing light to peak through the USB port. The fit here is much better on the Samsung case.
The lack of side grip is actually worse and more like the Verus Thor case, the Samsung protective case gets more slippery when cold than the Nillkin case. The Nillkin despite its smooth sides doesn't lose as much grip when cold.
Also, the Nillkin case fits the headphone jack better IMO because it covers all the chamfered edges. Once I fitted the USB port, I could say that I prefer its fit around the USB port better for the same reason but there is some concern about the fit near the mics. The Samsung case fits the mics perfectly and tight and even accommodates the Verizon spacing here. My modification on the Nillkin is not precise so I think the Samsung case may actually sound better on a call.
The review mentions the Nillkin is easy on, easy off; exactly, but it appears the Samsung case is harder to remove than even the Verus Thor despite looking and feeling quite similar around the bezel lip. The Samsung case feels as if it needs to stretch to come off but less cooperative at doing so when cold.
Others have said the Nillkin is compatible with the OEM wireless charger cover. If so, the case may appeal to both the wireless chargers and frequent battery replacement users.
I may try the S curve case but would like to know if it covers the chamfered edges as nice as the Nillkin but also fits the mics as perfectly as the Samsung protective case+?
damn that sucks about the Samsung case.. amazon is full of 5 star reviews so I got it.. and now I'm reading it sucks. and i spent 20 bucks on that stupid thing. damnit. oh well it comes Monday so we'll see. I'm using the diztronic now and it's nice, but i agree with him that the s line case is great. I've got the same one, but it doesn't fit as well as it should around the bottom lip of rhe phone, and the cutouts don't match the Verizon one. also, there's no raised edge around the camera and i don't like that since I place my phone down on its back.
Sent from my Samsung Galaxy Note 4 using Tapatalk.
There must not be a perfect case out there at the moment. What disappoints me about the Samsung protective case+ is the cold grip and ease of removal. Your results may differ; hoping warmer weather improves the ease of removal. I do think the warmer weather grip is good. We've had a warm day and a cold day since the case arrived. The fit is as nice as the Verus Thor.
To be fair on the grip gripes, I have small hands and suffer from dry skin in colder environments. Both tend to make these cases cold, hard and slippery.
Thanks for the commentary on the S Line case.
The cases compromise one thing or another. For now, I can deal with the lack of grip of the Samsung case because it's minimal. Don't get bummed until you try it yourself.
I got the Samsung, and i have no problem with grip issues. probably bc i used the diztronic for like 3 weeks.. and the sides of that are slippery too. this to me is decent enough grip. I actually love this Samsung case. it's thin. feels better than the diztronic. really keeps the phone shape the same. I got the blue and it looks so cool
Sent from my Samsung Galaxy Note 4 using Tapatalk.
I thought I was going to buy the Tech 21 Tactical Impact in matte black today. T-mobile only had the mesh in purple; I tried the fit on my phone and hate the exposed chamfered edges near the headphone jack. Also lacks the raised camera lip. Disappointing. The salesman said the black matte case, which they didn't have ATM, would be identical in fit. Deal breaker for my pursuit of a better case. The Nillkin Armor bumper case and Samsung are the better cases, for me. The Verus Thor is third for me.
Next week I should recieve e.grips which I plan to stick on the Samsung case.
It's amazing that we can't find a great slim case with a good grip.

What case do you use on Nexus 6P?

Hey guys. I just decided to try Nexus 6P. Looking for some great cases to protect it! But also I don't wanna spoil the original look of it since the design's so unique and beautiful!Just got two clear cases for my former Nexus 6 from AMZ and looks wonderful, yet the clear case get darken yellowed after few weeks using, so just share your N6P case experience here and enjoy!
Long response incoming:
I initially bought a official microfibre Adopted case (in carbon) from Google along with my N6P (aluminium). I paid full price for it, but I thought it was worth the premium for an official case and the design was cool and unique. Massively underwhelmed when I received it, because it's nothing more than a generic TPU case with a thin "sticker" of microfibre on the back, which I sensed would be prone to staining and, over time, peeling. The fit was also really tight and button presses weren't that responsive. I decided in the end that the Nexus branding wasn't worth the premium, so I returned it.
I then ordered a charcoal Diztronic case. I've had good experiences with Diztronic in the past, having used their case on my Galaxy Nexus as a daily driver. It was cheaper than the Spigen Rugged Armor and I appreciated the minimalist aesthetic, not being a fan of the faux carbon fibre pattern on the Spigen. The fit and finish was great, and the buttons were clicky and responsive. My only minor niggle was the cutout for the camera sensor wasn't completely accurate, as it cut off part of the circle surrounding the sensor (100% an aesthetic oversight with no impact on function).
I then bought a Speck Candyshell Grip (in white) during the Black Friday sale, when it was 50% off. Definitely my favourite case of the three I've tested so far. It provides the most protection (being a dual-layer silicone and polycarbonate hybrid), looks striking, and, as the name implies, provides a ton of grip.
I've had a Speck Candyshell on my iPod touch and over 4 years later, it's still kept my iPod in perfect condition. The case itself is scratched up and turned a bit off-white, but I haven't exactly been gentle with it (having taken it traveling and camping) so I'm confident in its protective capabilities.
I'll likely be rocking the Speck case as my daily driver for the time being, and I'll only swap back to the Diztronic when I want a more toned-down look and slimmer profile (maybe if I'm at a fancy event wearing slacks).
Finally, I also pre-ordered a white Crash Guard + Project S from Evolutive Labs when they offered 25% off the first 50 pre-orders. IMO this would be the solution to preserving the Nexus's original design and aesthetics, while still providing a lot of protection (if the demo videos are any indication). I have no idea what Project S is, though (hopefully some kind of transparent skin, though they said it wasn't going to be made of the same material as the Rhino Shield).
I have a tempered glass screen protector from intelliARMOR protecting the front (second generation/first revision, the model prior to production of the two distinct "case-friendly" and "edge to edge" versions). It's been fine with both the Diztronic and Speck cases, though I'm curious as to whether the edge-to-edge versions might also be compatible with the Speck and Crash Guard, as there's just 1 mm between the edges of the cases and screen protector, where I find dust and grease can get trapped in between.
If you're looking for clear cases, there're Spigen's Ultra Hybrid and Neo Hybrid EX cases. The Ultra Hybrid is a single-layer case with a clear polycarbonate back framed by TPU along the edges. I wouldn't recommend it personally because I've heard that clear TPU will stain over time (as likely what happened to your original case), and the visor is completely exposed and thus prone to scratches.
The Neo Hybrid EX consists of 2 pieces: a clear TPU shell and a coloured polycarbonate bumper (essentially, the reverse of the Ultra Hybrid). It looks to be the best clear case I've seen in terms of protection (as the visor is actually covered), but I don't know how the clear TPU will fare over time, whether it will also be prone to staining. I'd wait on reviews for this case before ordering, and for it to be listed on Spigen's Amazon store, which will likely be cheaper than buying it off their main website or eBay store.
To be honest it's the first device that I don't have a case for it although I have a tampered glass and a pouch. But I'm waiting for some skins from dbrand and a wooden skin from toastmade.
Tapatalked with my Nexus 6P
I got the carbon cloth backed Nexus 6P case originally and I really like the look and feel of it, but it's not the most protective. The only issue I've had with it is taking screenshots (the case presses buttons you don't mean to) and it wouldn't work with a tempered glass screen protector (it peels it up).
On the black Friday I got the Speck CandyShell in black/slate and I'm digging it. It's more protective and it makes the button presses a little harder, which I like. I would think it'd work with a glass screen protector as the bezels don't intrude onto the glass very much.
I use a Supcase Unicorn Beetle Hybrid as my standard case. I usually slide it in my pants or jacket pocket. I do wish there was a belt clip for the Beetle Hybrid, but to get a belt clip case combo you typically are into something much thicker and substantial that is, for me, unnecessary. When I'm wearing a suit, I use it bare and carry it in a Story Leather belt clip holster made for the iPhone 6s Plus. The phone has a Skinomi Tech Glass protector on it.
My experience mirrors LuckyDragan a little bit.
My first case was the microfiber case from the Google store. While it looked nice and the in hand feel was decent, I felt it cost way too much for what it was. I ended up returning it because when I pressed the edge of the case by the buttons it would change the volume. Not cool for a $35 case.
Next case is the reg. Adopted case. It's not bad. I really like the textured sides. It's also fairly narrow. Thing is, I paid $10 for it, at the reg. price of $20, I'm not sure if it's worth it. By the pics I've seen, I think it looks better than the Diztronic, especially the fingerprint cut out.
3rd case is the Spigen Rugged Armor. Except for the camera cut out (I don't like how it doesn't leave room for the blueish oval), I think it looks the best of all the cases I've tried so far. My nags are that It's all little wide and slippery. At $13.00?, it's a good buy.
4th case is the Speck Grip. My favorite so far. It's not as thin as the other cases but not bulky. The grip is awesome, no problem using the phone with one hand. At first glance, I didn't think it was the best looking case, but it's starting to grow on me. The protection and how it makes the phone so much easier to handle makes it a winner. @ $20 I paid during the Google store's sale, I think it's worth it. @ the reg. price of $40, idk.
If haven't yet, check out Pilz review thread, so much good info.
White Speck case as my daily driver.
I have tried the Diztronic one, while it does provide protection, did not like how loose the edges felt, definitely not as snug and stiff as my Diztronic Ultra that is on my GS6. It easily bent out edges for my taste, and thought of getting some debris that could scratch up the phone was bugging me somewhat. If you need a very minimalist, fingerprint resistant, and decent lip for screen protection, that is the case to have.
Also have the Supcase Unicorn Hybrid Ultra. great case, snug and firmer edges than the Diztronic one, but damn, is that case slippery. I have a habit of placing the phone on my car seat, and that thing just slides around like a hockey puck on ice when placed on its back. Placing it face down did help... still preferred it over the Diztronic.
But snagged the White Speck Candy Shell Grip case at 50% off, love it. Excellent grip, very tight and solid felling edges, does not slide when placed on a my car seat. Wished they offered a matt finish white version of this, since I am not a fan of shiny cases, but the black rubber lines offset it enough to be likable for me. Sporting the Orzly TGSP,with that case there is a minimal space between the glass and the edges of the case, nearly perfect sealed fit. Hoping the intelliglass ones are a bit more of an coverage so that it could have a near gapless glass to case seal, still waiting on receiving mine...
Currently have the Tudia case which is brill, but also got the Spigen rugged case coming.
Official microfiber case in carbon. No screenshot issues or button issues in general. I love the soft fabric feel. Feels more "welcoming" than the cold, hard plastic/TPU of other cases I've used. Regarding durability, I'm a little concerned, but only time will tell how the microfiber will hold up.
Smoked Ringke fusion is my case of choice, at least for now. I also have the Orzly flexicase and Spigen rugged armor. Don't really care for either of those.
Anyone want to trade a case for the spigen rugged armor? mint condition and hasn't been used other than trying it on once.
PuffinNugz said:
Smoked Ringke fusion is my case of choice, at least for now.
Click to expand...
Click to collapse
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.
I use spigen rugged armor, it's a good case that offers high protection to your phone..
i intend to order the verus high pro shield case though, just want to wait for some time until they fully supply the updated case.. the first batches had a defect about the charging port..
InfestedAdam said:
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.
Click to expand...
Click to collapse
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g
PuffinNugz said:
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g
Click to expand...
Click to collapse
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.
InfestedAdam said:
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.
Click to expand...
Click to collapse
Yeah, not sure about amazon, but I bought mine from that ebay link. Pretty sure they are the actual sellers.
The Spigen rugged arrived today and it is SOOOO much nicer than the Tudia one. Better fit and feels nicer and more secure.
Sent from my Nexus 6P using Tapatalk
I've had a few cases so far.
SR Tech - Typical TPU case. Decent protection. Cutouts were slightly off. Total fingerprint/oil magnet. Got real slippery after a week or so of use and required a wipe down. Did not interfere with my Pleson TGSP.
Spigen Rugged Armor - Soft touch finish felt really good in hand. Very good protection at the sacrifice of some added bulk. Cutouts were precise and buttons had a nice tactile feel. Soft touch got some smudges on it occasionally but not nearly as bad as the SR case. Did not interfere with my Pleson TGSP but it was really close.
Spigen Thin Fit - Very interesting finish on this case. Kinda felt like the back of the Nexus 6. Fingerprints weren't really a problem but oil/smudging was. Case snapped on snugly and provided good protection for the covered areas. Top and bottom of the phone were exposed. Did not interfere with my Pleson TGSP.
Nillkin Nature - This is my daily driver. Pretty much the same as the SR Tech, only about half the thickness. Cutouts are more precise and there is a cover for the Type C port, which I really like. This is literally the thinnest case I've ever used and it really helps make the already large 6P more manageable in the hand. I wish it came in a matte finish so oil/fingerprints weren't so much of an issue, but other than that I'm happy.
Adopted for now until bumpers start arriving and be reviewed.
Ringke smoke and Google Microfiber. Like both and switch weekely
Sent from my Nexus 6P using Tapatalk
I switch from the official google carbon case and spigen ultra hybrid. They are great cases but the buttons on both aren't the best. I also have speck case but I use it for when I go to the gym. Diztronic case is nice but phone feels loose inside and verus case.. Its whatever.
Sent from my Nexus 6 using Tapatalk

Review: MoKo [Heavy Duty] case for Nexus 6P Huawei

Hi guys,
I finally got around to doing a review on the Moko Heavy Duty Case for my 6P. I ordered this on amazon.ca. I've rocked this case for about a week now since I did that video, and I am pleasantly surprised.
The cutouts are precise, and the case does not look or feel cheap. The fingerprint scanner is easy to use still as well. The plastic is pretty soft, and I don't think it would stay on on its own without the black shell, but it does fit perfectly. Also, didn't notice much pocket lint or anything else sticking to it like some have reported. Overall it's a great option for a more rugged case for the Nexus 6P, especially here in Canada, where the options can be sparse. Here's the link from amazon.
Nexus 6P Case - MoKo [Heavy Duty] Full Body Rugged Holster Cover with Swivel Belt Clip - Dual Layer Shock Resistant for Huawei Google Nexus 6P 5.7 Inch Smartphone 2015, PURPLE https://www.amazon.ca/dp/B00JP6J1A0/ref=cm_sw_r_other_awd_HnYMwbXKYG11S
11 bucks plus tax, and since I have PRIME, also got free 2 day shipping. Yes, I have a compulsive online shopping problem...
I will also post reviews for my Spigen Rugged Armour and a Poetic Revolution cases shortly.
https://youtu.be/k2k6gPdRPUY
Sent from my Nexus 6P using Tapatalk
I've got one in blue but I don't use it anymore. It's a pretty nice case and the quality is fantastic I just wish they would stop putting those huge bumps on the back for no reason. They serve absolutely no purpose and double the thickness of the phone. They do this on these cases for all phones and just still makes no sense.
RED ZMAN said:
[...] I just wish they would stop putting those huge bumps on the back for no reason. [...]
Click to expand...
Click to collapse
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)
daniels220 said:
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)
Click to expand...
Click to collapse
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?
RED ZMAN said:
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?
Click to expand...
Click to collapse
I have the black version. Based on the pictures on Amazon the colors looked like they'd be pretty in-your-face, especially since the highlight color is visible directly around the edges of the screen. I'm afraid I don't have any holsters—I've never used one.
I realize, I forgot to mention the most important thing! The headphone and USB-C cutouts on this case, as shipped, are not large enough for most cables. The stock USB-C cable fits but scuffs the sides, many high-quality third-party cables won't, and the only headphone plugs that will fit are the super-tiny ones that some headphones have for exactly this reason. But! If you have a decent utility knife, some courage, and a steady hand, it's possible to enlarge the cutouts without messing up the case. (I cut away a tiny bit of the TPU near the jacks as well, since it was being deformed when plugging in a cable.) With this done it works beautifully—the case is even thin enough to use a Square credit-card reader in the headphone jack.

Quite possibly the best rugged case for the G5S Plus, and it's only $10 from Amazon

Like so many other owners of the Moto G5S Plus, I've struggled with finding a quality case. I've bought several off Amazon, and one from eBay that ended up going directly in the trash can, it was that bad.
I'll admit, I'm very picky. I want a case that's rugged, that offers good camera and screen protection, and is well made. I initially settled on this one from Amazon, and even though it provided adequate protection, I've never been happy with how grippy the soft silicone inner shell is, which makes it a pain when taking it in and out of pockets.
Every few weeks since I've purchased the phone, I've been searching on Amazon to see what's become available, and every time I've tried another case, I've been thoroughly disappointed, until now.
I came across the CoverOn Tank Series case on Amazon, and it looked promising, but only had one review. At $10, I thought I'd take a chance. It arrived today, and I'm very pleased with it. The design of the case is nearly identical to the Supcase Unicorn Beetle Pro, without the built in screen protector, which for me is a plus. The case back and the front bezel are made of polycarbonate, and the TPU shell is fused to the polycarbonate back of the case. The sides of the TPU offer just the right amount of grip, with additional cushion on the corners. The button covers are very tactile with zero gap, which prevents additional dust from getting inside the case. The case also has port covers integrated into the TPU, with the cutouts for the microphones and speaker perfectly placed. On a scale from 1-10, it's an easy 9.
In my opinion, and after just a few hours of use, there's two cons for this case.
1. I'm not a big fan of port covers, and actually cut them off the Unicorn Beetle Pro case for my old phone, because on that particular case, the material was too stiff and the port cover put too much tension on the USB cable when it was plugged in. Maybe it isn't a problem, but I just wasn't comfortable with it. On the CoverOn Tank cover, I may be keeping the port covers. There isn't much tension from the port covers on this case, but the covers are sometimes a bit of a pain to get open. However, because of a lack of tension, after the port cover has been open for any extended period of time, such as while the phone is charging, it takes a while before the port cover will fully recess back into the opening in the case. If I get tired of it, I'll probably just cut the port covers off the case.
2. The polycarbonate screen bezel could fit a little tighter to the TPU. It's not loose enough that I would worry about the case and bezel separating, but it's not quite as snug as the Supcase. It is tight enough, though, to get the job done.
Overall, I'm very pleased with this case, and it would take an amazing, new case coming out for me to consider switching. If you're unhappy with the case you have, give this one a shot, I doubt you'd be disappointed.
The attached images are some of the stock photos from Amazon.
I've been looking for something with port covers, actually, but that particular case is not available in the UK. Ringke is another option, but only made for G5 Plus, not the S.
The link says it ships to the UK. It's not on Amazon UK but they do ship from Amazon.com
Received mine in the UK after ordering from Amazon.com
Really pleased with it. Think it's the best case I've ever seen.

Categories

Resources