Database Info

[Q] Phone stuck when turning on

Over the summer I rooted my Droid Razr HD phone and recently have been trying different roms to use and finally found one I liked (Liquid JB official). After being out late one night my phone died because it ran out of battery. Once I got home I tried plugging it in and letting it charge for awhile before turning it back on. When I finally tried turning it on my phone got stuck on the red Motorola "M" symbol. I let it sit for almost 30 min thinking it was just trying to load everything but this never changed. Is this usual for a rooted phone not to be able to turn on? It seems to me like my phone is not able to find the boot up file for the rom? Any help would be great I really would like to go back to using a different rom.
This problem has also happened to me using other roms to like Beanstalk and Eclipse and happens whether my phone dies or I shut it off or just reboot it.

SELind01 said:
Over the summer I rooted my Droid Razr HD phone and recently have been trying different roms to use and finally found one I liked (Liquid JB official). After being out late one night my phone died because it ran out of battery. Once I got home I tried plugging it in and letting it charge for awhile before turning it back on. When I finally tried turning it on my phone got stuck on the red Motorola "M" symbol. I let it sit for almost 30 min thinking it was just trying to load everything but this never changed. Is this usual for a rooted phone not to be able to turn on? It seems to me like my phone is not able to find the boot up file for the rom? Any help would be great I really would like to go back to using a different rom.
This problem has also happened to me using other roms to like Beanstalk and Eclipse and happens whether my phone dies or I shut it off or just reboot it.
Click to expand...
Click to collapse
thats defiantly not normal. you should wipe everything 100% clean and start over, also updating your recovery to the latest version. during the wipe process make sure you wipe "data-media-/sdcard" too (NOT external sd, unless you want to and have things backed up).
also, its extremely bad for the battery to let it run down to the point where it shuts off. its only a matter of time, repeatedly doing that, before you plug it in and it will not charge no matter how long you leave it on for.

bweN diorD said:
thats defiantly not normal. you should wipe everything 100% clean and start over, also updating your recovery to the latest version. during the wipe process make sure you wipe "data-media-/sdcard" too (NOT external sd, unless you want to and have things backed up).
also, its extremely bad for the battery to let it run down to the point where it shuts off. its only a matter of time, repeatedly doing that, before you plug it in and it will not charge no matter how long you leave it on for.
Click to expand...
Click to collapse
When I am installing a new rom I wipe Dalvik Cache, System, Data, and Cache each three times and then I also Format Data Three times. Is this what you mean my wipe everything 100%?
Also I am currently running TWRP v2.5.0.0, I have found a newer version on twrps website but when I go into Rom Manager and check for updates my phone does not come up as a possible clockworkmod Recovery?

SELind01 said:
Over the summer I rooted my Droid Razr HD phone and recently have been trying different roms to use and finally found one I liked (Liquid JB official). After being out late one night my phone died because it ran out of battery. Once I got home I tried plugging it in and letting it charge for awhile before turning it back on. When I finally tried turning it on my phone got stuck on the red Motorola "M" symbol. I let it sit for almost 30 min thinking it was just trying to load everything but this never changed. Is this usual for a rooted phone not to be able to turn on? It seems to me like my phone is not able to find the boot up file for the rom? Any help would be great I really would like to go back to using a different rom.
This problem has also happened to me using other roms to like Beanstalk and Eclipse and happens whether my phone dies or I shut it off or just reboot it.
Click to expand...
Click to collapse
In all likelihood, this is not a LiquidSmooth issue. I would suggest a clean install as the previous posters suggested. The latest stable version of LS is now at v2.10 for Android 4.3
LS 2.10 must be installed as follows, according to the devs:
New Flashing Instructions
wipe data/factory reset
wipe cache partition
wipe dalvik cache
format /system
Install ROM, NOT GAPPS YET!!
Reboot system, first boot may take a few minutes, don't panic ;-D
Setup your phones settings, anything that isn't Google related
or let your phone sit for 5 minutes
reboot back into recovery
wipe cache and dalvik
then flash gapps
reboot and enjoy
Click to expand...
Click to collapse
For the xt926, the download page for LS 2.10 is here: http://d-h.st/users/jsnweitzel/?fld_id=15202#files
gapps 8/13 or newer are supposed to be used with this ROM. dl from here: http://d-h.st/users/jsnweitzel/?fld_id=21058#files
The official ROM page is over at G+ https://plus.google.com/u/0/communities/117452480298315341829, if you have any additional questions.
Give it a whirl, and let us know what happens. Good luck.

SELind01 said:
When I am installing a new rom I wipe Dalvik Cache, System, Data, and Cache each three times and then I also Format Data Three times. Is this what you mean my wipe everything 100%?
Also I am currently running TWRP v2.5.0.0, I have found a newer version on twrps website but when I go into Rom Manager and check for updates my phone does not come up as a possible clockworkmod Recovery?
Click to expand...
Click to collapse
you are wiping very well, i was just confirming you wipe everything possible short of the external sd.
the wipe im talking about in twrp is wiped when you wipe "data", the one where you have to type "yes" before it will wipe. in cwm, in the formatting section (i forget what its called), there is an option that specifically says "data-media /internal sd" or something close to that.
as for the latest recoveries, here is a tool by Tucstwo that i have been updating lately http://www.mediafire.com/download/2o061zcmzlaycb5/Razr_HD_Recovery_Flasher_V8.rar
also, twrp 2.5 doesnt have all the selinux bugs worked out, you need 2.6.3.0, which is in the above utility.

[Q] Restart loop(not bootloop) - really weird

Hey lads,
I got a really weird problem and I've tried nearly everything I can think of. I had EMUI 2.3(b121sp06) and I tried the online OTA update to b307 if I remember right(was automatically suggesting the update) and at the update screen it loaded to about 99% and then stopped. Said not to press power while on this screen but obviously it wasn't going to finish. So I reset the phone and it started the "recovery loop", so basically keep trying to apply the update. I had to flash CWM to break out and flashed the whole system by hand(recovery,system,boot,cache,cust and userdata img files) and it starts up but it keeps resetting and seemingly it's random. Android boots up, I don't touch the phone--> boom reset. Weird thing is it even does it in recovery.
If I really want to explain the problem it's like as if my finger got stuck on the power button(that naturally made me think that the button might be f*cked), but booting into fastboot and not having resets cleared my suspicion. What I also noticed is that every time it boots up it doesn't recognize the sim card and I have no signal or whatsoever.
Tried multi tool unbricking method -> doesn't work
Tried factory reset from stock recovery(had to be fast so it doesn't reset before) ->doesn't work
Tried wiping dalvik cache and factory reset from CWM ->doesn't work
Tried killing battery by letting it keep resetting -> battery drained, reset loop stopped ->put the phone on charger->reset loop started again
I have no f*cking clue how can I get out of this, will keep trying though. Any help is appreciated, thank you!

Hi
Did you try to remove the Sd Card ? Honor 6 reboot is often due to faulty SD Card.
Which model do you have ? L04 ?
B307 upgrade sure ?
Seb

Yes, that was my first idea, still does it though. I have the L02 and I'm not positive it was b307, but it started with 3, could be b303 if there is one.

I don't know for L02 but for L04 there is a Full ROM that you can flash with the three buttons method. (Vol+,Vol-, power and put the ROM in /dload folder on the SD card).
Maybe there is such thing for L02 ?

There is, but as I said the phone restarts even in recovery. It's like the phone restarts every 30 secs except for fastboot.

if it's not SD card or internal flash problem so, it seems to be hardware related to me (

Would make sense but it occurred only after I tried OTA. Would be really surprised if that killed that hardware :-/

xXPhoenixXx said:
Would make sense but it occurred only after I tried OTA. Would be really surprised if that killed that hardware :-/
Click to expand...
Click to collapse
Have u fixed the issue yet????

kamalnath93 said:
Have u fixed the issue yet????
Click to expand...
Click to collapse
Unfortunately not, I'm out of ideas, trying to negotiate with the seller to sort something out, I think the phone is beyond saving

Same thing happened with me. Don't have any solution. Have you fixed it?

xXPhoenixXx said:
Hey lads,
I got a really weird problem and I've tried nearly everything I can think of. I had EMUI 2.3(b121sp06) and I tried the online OTA update to b307 if I remember right(was automatically suggesting the update) and at the update screen it loaded to about 99% and then stopped. Said not to press power while on this screen but obviously it wasn't going to finish. So I reset the phone and it started the "recovery loop", so basically keep trying to apply the update. I had to flash CWM to break out and flashed the whole system by hand(recovery,system,boot,cache,cust and userdata img files) and it starts up but it keeps resetting and seemingly it's random. Android boots up, I don't touch the phone--> boom reset. Weird thing is it even does it in recovery.
If I really want to explain the problem it's like as if my finger got stuck on the power button(that naturally made me think that the button might be f*cked), but booting into fastboot and not having resets cleared my suspicion. What I also noticed is that every time it boots up it doesn't recognize the sim card and I have no signal or whatsoever.
Tried multi tool unbricking method -> doesn't work
Tried factory reset from stock recovery(had to be fast so it doesn't reset before) ->doesn't work
Tried wiping dalvik cache and factory reset from CWM ->doesn't work
Tried killing battery by letting it keep resetting -> battery drained, reset loop stopped ->put the phone on charger->reset loop started again
I have no f*cking clue how can I get out of this, will keep trying though. Any help is appreciated, thank you!
Click to expand...
Click to collapse
Its might be a battery problem Or power flex cable. Try to turn on the phone during charge

guys im facing the same problem now... waiting for any solutions

I have tried stop & uninstall some app
I've tried as quickly as I can when the phone (nokia x) is on, then I stop> uninstall I consider potentially cause this problem (facebook, whatsapp, uc browser) and then it managed to prevent the continuous restarts. but problems arise even though the application had me uninstall and then I restart the phone. and it is back again, I uninstalled the app that has remained with the error settings and restart repeatedly. who knows what else : '(

xXPhoenixXx said:
Hey lads,
I got a really weird problem and I've tried nearly everything I can think of. I had EMUI 2.3(b121sp06) and I tried the online OTA update to b307 if I remember right(was automatically suggesting the update) and at the update screen it loaded to about 99% and then stopped. Said not to press power while on this screen but obviously it wasn't going to finish. So I reset the phone and it started the "recovery loop", so basically keep trying to apply the update. I had to flash CWM to break out and flashed the whole system by hand(recovery,system,boot,cache,cust and userdata img files) and it starts up but it keeps resetting and seemingly it's random. Android boots up, I don't touch the phone--> boom reset. Weird thing is it even does it in recovery.
If I really want to explain the problem it's like as if my finger got stuck on the power button(that naturally made me think that the button might be f*cked), but booting into fastboot and not having resets cleared my suspicion. What I also noticed is that every time it boots up it doesn't recognize the sim card and I have no signal or whatsoever.
Tried multi tool unbricking method -> doesn't work
Tried factory reset from stock recovery(had to be fast so it doesn't reset before) ->doesn't work
Tried wiping dalvik cache and factory reset from CWM ->doesn't work
Tried killing battery by letting it keep resetting -> battery drained, reset loop stopped ->put the phone on charger->reset loop started again
I have no f*cking clue how can I get out of this, will keep trying though. Any help is appreciated, thank you!
Click to expand...
Click to collapse
Hey I tried to root my phone and its stuck in the same restart loop. I am trying to install some roms, CM or stock. U also try and let me know if it works.

Kuber.ksp said:
Hey I tried to root my phone and its stuck in the same restart loop. I am trying to install some roms, CM or stock. U also try and let me know if it works.
Click to expand...
Click to collapse
my phone is working only on charhing.. pufffff

snrtrt said:
my phone is working only on charhing.. pufffff
Click to expand...
Click to collapse
Did you follow the guide here?
Sent from my Honor 8 using XDA Labs

In the past my battery lost it's endurance pretty much. Furthermore I've read that a defective battery causes lots of weird behaviours on our Honor 6, which was the same to mine.
In my case a replacement of the battery worked well, to get my Honor 6 back to life:
https://www.youtube.com/watch?v=ceyzXavxFAw
It's not that difficult and lasts approx. 30-45 mins. Spare Batteries are available for 6 - 10 bucks on ebay or directly from the chinese internet stores.

Borg666 said:
In the past my battery lost it's endurance pretty much. Furthermore I've read that a defective battery causes lots of weird behaviours on our Honor 6, which was the same to mine.
In my case a replacement of the battery worked well, to get my Honor 6 back to life:
It's not that difficult and lasts approx. 30-45 mins. Spare Batteries are available for 6 - 10 bucks on ebay or directly from the chinese internet stores.
Click to expand...
Click to collapse
It's really important that we use original chargers for the health of our device.

A handful of problems after performing a factory reset

Hi.
I installed some dodgy app which required root access to operate (but it didn't even though I allowed it in SuperSu) and this is where my problems started.
First of all, I noticed each and every app I tried to run would immediately crash. That included system apps, such as the Settings app. At that stage I was left with only the launcher working and attempts to uninstall apps would also cause a crash. Even the shutdown menu was broken and the phone hung up so I was forced to reboot it by holding the power button for 10 seconds.
After that, the phone would no longer be able to boot, it was stuck in a boot loop, but recovery still worked (TWRP for that matter) so firstly I wiped the cache partitions (including dalvik cache) but that didn't help, as the phone still wouldn't boot. In this case there was only one thing left for me to try and that was the factory reset capability of TWRP which claimed to not even touch internal storage so I was fine with that and did the wipe.
Thankfully, the phone booted afterwards and it welcomed me with the first startup guide (the language selection dialog was really buggy but that's Huawei's fault) and the phone was seemingly ok, except that the whole internal storage had been wiped out but not only that - the external microsd card was empty as well! Could you believe that? I couldn't. TWRP promised not to touch internal storage and the external memory card wasn't even mentioned but why would it wipe it anyway?
That's for the story behind it, now for the actual problems I'm facing right now:
The stock remote app is gone
The boot animation has changed to a different one (now it's a silver "android" logo instead of the "honor" logo)
Battery usage stats are not available (see: http://i.cubeupload.com/BXCknW.png)
Sound quality from the built-in speaker seems noticeably worse
Hereby, I'm asking you guys to help me out with all of this.
The "remote app missing" problem could be solved by someone sharing their apk file with me, that's probably the simplest one to fix.
As for the boot animation, I have no clue as I don't even know what files are responsible for that.
The same for the battery stats problem, I'm already through a couple of full-charge-to-discharge cycles as well as wiping the cache partition, but the problem remains.
The sound quality probably has to do with the DTS sound enhancer. The config file for that is either "/cust/unicom/cn/xml/dolby_config.xml" or "/cust/unicomelectric/cn/xml/dolby_config.xml" and I'm asking you to upload these files somewhere so I can compare them with mine to see if anything is different.
The device I'm using is the H60-L02 variant running the B532 ROM.

Does the 3 buttons method erase internal storage as well? I've already set up quite some apps and having to do it again wouldn't be the most pleasant surprise. But at least in this case I could make some backups and whatnot...
Also, would it work if I flashed B535 straight away or does the 3 buttons method expect the same version which is already installed, in this case B532?

pudup said:
It will wipe internal storage. You can flash any *full* ROM as long as you're not moving up or down from kitkat-lolipop/marshmallow.
Click to expand...
Click to collapse
Okay, so I decided I'd do the whole thing today. I downloaded the full B535 ROM on my PC, backed up all the stuff I care about from the phone to the PC as well, and also I downloaded the MultiTool.
Though the MultiTool thread says this in bold red:
VirusPlus said:
EMUI 3.1 WARNING! Update over rooted or system modded in EMUI 3.1 gives a BRICK.
You have to restore system and REMOVE root before every update in EMUI 3.1 for now.
Click to expand...
Click to collapse
So I also fired up Titanium Backup in order to defrost all the frozen apps, which went fine, and then I wanted to unroot the phone but I've been unable to do so so far.
To unroot, I launch the SuperSU app, navigate to the "Settings" tab and select "Full unroot". The problem being, it just gets stuck on the screen saying "Uninstalling, please wait...". I don't know how long it usually takes to complete, so far I've waited for maybe 10 minutes and nothing seems to change. Should I care about that? Is that warning about updating rooted/modified EMUI 3.1 resulting in a brick still true?
Can I skip this step and just flash the stock recovery followed by the 3 buttons method?
EDIT:
After some trial and error with the multi tool and different recoveries, I was able to finally unroot. Next, I flashed the stock recovery for B532 and attempted to do the 3 buttons method, but it would say "Install failed. The update package does not exist" (could be because I'm doing the update from a USB flash drive as I don't have an micro sd card big enough to fit the package). So I rebooted the phone into system and used the Updater to perfrom a local update where it would let me pick the USB drive. It completed without errors and then rebooted into some kind of updater (black background and some bluish emui colors) where it also took some time to finish thankfully successfully. I can right now see the phone booting and for what it's worth, the boot animation is once again the good old "honor" logo and not that ugly silvery "android" one
And now it's "Optimizing system...". I really hope it finsishes successfully as it's already a bit late here and I wouldn't like the phone to be unusable tomorrow :laugh:
36% ready...
46% it's kind of fun to watch this, and now 49%
I'd like to thank @pudup once more for helping out, I'm not really that much into flashing recoveries, roms and all that myself. Without your help I would probably be too scared to try doing something on my own :crying:
86%, 89%, 95% and 100%. Aww, what a relief Good old stock lock screen and wallpaper.

Creating Backup on XT1033 stuck on Bootloop

Hi everyone,
I hope I am in the right forum to post my query. I am trying to find a solution to the existing Problem. Before I get to describe the problem specifically I must make it clear that this is my first time on any android forum. While trying to find a solution for the existing problem, I had to google words like Bootloop, Softbrick, TWRP, Custom Recovery, Root, Flash, ROM etc. They still do not make much sense to me (I will be reading more about them in the coming days). So now you can imagine how big of a Noob I am.
Well, I own a Moto G 1st Gen XT1033. Since yesterday it is in a Bootloop. The phone boots completely at times but automatically restarts itself after a while. Sometimes I have 1-2 minutes at maximum to use the phone. Until now I have been able to delete quite a bit of data for example pictures and certain apps because I thought that Bootloop was happening because of no space on the memory. The last app that I installed 3 days back from Google Play after which this problem started occurring, I was also able to uninstall it. Until now I have tried wiping out Cache by going in the recovery mode but that didnt fix the Reboot problem. I also tried holding the Volume Up + Volume Down + Power button for 2 minutes (I read it on internet somewhere as a fix to the problem) but that didnt help either. I have never created a backup and I don't want to do a Factory Reset as a fix to the problem because I don't want to lose the data. I also tried to follow your solution for backing up data but I got lost. I don't know where to start from. Thats why I am writing here.
I don't know if my phone is rooted. I did turn on Developer Mode on my phone in the past (if this info helps).
I do not know which Android version I have but I am guessing that it is Lollipop.
I never installed TWRP or any Custom Recovery software on my phone before.
The battery is working ok.
What I am looking for is:
1) Step by step guide to create a backup
2) Resolving Bootloop issue if possible
Thanks

without custom recovery no data backup is possible.
u need to unlock your bootloader and install The Twrp recovery to perform the backup.
but only fix for you is factory reset.

jbanti said:
without custom recovery no data backup is possible.
u need to unlock your bootloader and install The Twrp recovery to perform the backup.
but only fix for you is factory reset.
Click to expand...
Click to collapse
Thank you @jbanti Apologize for my late response. As far as I know unlocking the bootloader will erase the memory. One can recover data by ADB Pull by using these Threads:
https://forum.xda-developers.com/moto-g/help/moto-g-1st-gen-xt1033-boot-loop-stock-t3357472 (Post #4)
https://forum.xda-developers.com/showthread.php?t=2426426
So I know that there it is possible using`adb pull` command to take backup of whole device but I don't know how. I get lost in the 2nd thread. Any lead would be appreciated
Thanks

Primux Sirico 2 issues

Hello everyone, I have lots of issues with this tablet since I bought it. It works painfully slow, yet resetting it doesn't change anything, still the same problem. I also tried to root it via Kingroot and it werk, however it took me lot of time due to the system being unresponsive / unstable and almost useless. It comes with android 4.0.3 and I also tried looking up for any possibilites to reinstall the firmware since I'm extremely sure it could be caused from the firmware it also got installed from the factory. I also tried searching for custom roms and other ways around for TWRP or any custom recovery, but no result. I also tried up with the Flashify app to try extracting / backing up / dumping the recovery and the kernel but the app freezes up. I also tried a possibility to update the firmware from their official page, hence it failed to do so since it gives an error in their flashing software that dosen't tell me nor it logs it what it could be caused up from the connecting part.
primux.es/producto/tablets/tablet-primux-siroco-2-101/189
(not sure if anyone understands spanish thought but I can translate if needed)
This is the page from where I tried to download and install their software and their firmware down below on the page. primuxcomputers.es/primux/siroco2upgrade.pdf
There are the instructions where I tried to follow but at the "Imagen 9: Icono" part got me stuck in there. It requests me to insert the cable in the tablet holding the "Home" button and while holding it, plugging in the USB cable throught PC, and tap quickly the "Power" button 3 times. However it gives me a red X icon and yet nothing shows up in the devices: No ID, no other kind of detection no logs no nothing. After it showed up the X on the status, it disconnects itself and it changes to ready / green icon and plugs itself in again but nothing really happens to detect it again thought.
I also tried to boot in recovery mode but nothing happens menawhile Flashify keeps on the rebooting in recovery mode in loop doing nothing else... I'm seriously in pain with this tablet. And if you ask me to return it, not gonna even bother doing that..
I seriously hope any answer very soon and don't get dissapointed by the ignorance of this topic..