[Completed] xposed for galaxy s4 i9505 - XDA Assist

Sir I use galaxy s4 i9505. I recently rooted my phone. It has lollipop version 5.0.1 . I want to install xposed framework for my phone, but whenever after installing xposed installer when I flash zip file and reboot, it goes into a bootloop. I tried using different roms but nothing happened. I request you to tell me what to do and if I need to download and special Rom then plz give me link. Also please provide me the link of xposed in taller and zip file for that particular rom
Please help sir.

Hello Dear ,
1st mate try to install any custom rom from custom recovery like twrp or philz ok
So try this rom
http://forum.xda-developers.com/showthread.php?t=3092479
Or this
http://forum.xda-developers.com/showthread.php?t=3252631
Or this
http://forum.xda-developers.com/showthread.php?t=3027063
After flash this rom just sit back & drink some coffee then wait 10-15 mins then ur s4 will booted normally ok
After u setup ur phone then flash xposed from this thread for touchwiz ok
http://forum.xda-developers.com/showthread.php?t=3113463
Again wait about 15 mins then it should boot normally &don't forget to wipe cache & dalvick ok
Thank You ,

Related

[Completed] I have flashed nameless rom android 5.0 and its stuck in boot loop

I had Archdroid installed in my phone .I have flashed it with nameless rom android 5.0.My phone model is GT-I9300 Samsung galaxy s3. Every time I wipe all data,and catche and flash this new rom its stuck in, boot loop.I tried installing nameless rom android 4.4.4 and again flashed it without wipe everything ,still its stuck in boot loop.I just wanna install this rom and want to get that awesome lollipop android 5.0,no matter what !!.Developers help me out guys!!!I want it so badly
XDA Visitor said:
I had Archdroid installed in my phone .I have flashed it with nameless rom android 5.0.My phone model is GT-I9300 Samsung galaxy s3. Every time I wipe all data,and catche and flash this new rom its stuck in, boot loop.I tried installing nameless rom android 4.4.4 and again flashed it without wipe everything ,still its stuck in boot loop.I just wanna install this rom and want to get that awesome lollipop android 5.0,no matter what !!.Developers help me out guys!!!I want it so badly
Click to expand...
Click to collapse
Maybe you have to stick to the installation instructions of the ROM you want to flash.
Please ask in the ROM thread, or in the [HELP THREAD] Galaxy S3 Ask any question. thread.
There you will get quick and proper help.
Thread closed and thank you.

[SC-04E] How to Flash Custom Rom on SC-04E

This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!AYJjzA6S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.
Flash custom touchwiz 5.0.1 Rom on sc04e
1 Update the Stock Rom to the lastest lollipop version:SC04EOMUGOI4
2. Make sure the soft-key can work. (if not, please refer to this post to solve the problem)
3. Flash Recovery. (CWM Recovery or Philz Recovery is recommended.)
4. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
5. Flash the custom touchwiz rom via cwm recovery, be aware of its version at 5.0.1 i.e Albe95 LolliROM 6.0 DEODEX & ODEX
6. Flash the Kernal for 5.0.1 in cwm recovery.
7. Reboot and Enjoy it.
Download
SC04EOMUGOI4 Link: https://mega.nz/#!hEZ3kQoT!UDugAgYis-NtshJorGu9slTDzACbR6EQPCf9vjrXeZg
Albe95 LolliROM 6.0 DEODEX & ODEX Link:https://mega.nz/#!KoRATJoK!1iXg0-hWGimgimWkvTIOzVjcP6bXyzxGSb0lmMQ_-RI
Kernal for 5.0.1 Link: https://mega.nz/#!wV5CWTxR!qXbJP2SOkjQgyn8izCL4OTo4RBqUi4nMGA-3_ebJ9OE
Reserved
Reserved
adagiov said:
Reserved
Click to expand...
Click to collapse
Thanks for your effort! :good: i`m not able to download at the moment but sounds promising!
Gargoyles said:
Thanks for your effort! :good: i`m not able to download at the moment but sounds promising!
Click to expand...
Click to collapse
You can download the Baiduyun Application to downlad the related files. Problem might occur because it is a Chinese skydrive. And I will upload to other skydrive if Baiduyun skydirve does not work.
Please advise specific skydrive if you know.
Hey thread, when i flash i9505 rom, reboot and it stop in Docomo logo and then it automatic reboot to recovery, i can't go to the mainscreen, i can't pass the bootscreen Docomo
mvstark98 said:
Hey thread, when i flash i9505 rom, reboot and it stop in Docomo logo and then it automatic reboot to recovery, i can't go to the mainscreen, i can't pass the bootscreen Docomo
Click to expand...
Click to collapse
try to enter in recovery and wipe cache and data.
Thank you so much for this post.
I have managed to update to Omega V40 on my sc-04e.
And I am able to use spmode, camera and wifi.
adagiov said:
Please Leave your problem or feedback below.
Click to expand...
Click to collapse
fix link,please,thank u
verticsss said:
fix link,please,thank u
Click to expand...
Click to collapse
Sorry, I have no idea what else link is available to both you and me.
verticsss said:
fix link,please,thank u
Click to expand...
Click to collapse
Sorry for the late reply, I tried to fix the link via Mega.
Hi,i would really appreciate it if you could just spare some few minutes of your time to help me out with my phone.
So I bought this barely used Samsung Galaxy S4 (i9505) from a guy. It came with android 4.2.2 and a boatloader/Baseband of SC04E0MUAMG2 and when I boot on it shows ntt-DoCoMo before booting up (so am guessing it was locked before, it came unlocked because every SIM I have tried has worked, and also it came rooted).
The issue is I really want to upgrade to Stock Lollipop or a custom lollipop rom like Aurora or Albe95 roms, but each time I try flashing a stock rom using Odin, it says fail (usually its when it gets to ' NAND write start, Auth fail '). Since Stock refused working I decided to try Flashing a custom rom using a custom recovery, it flashed successfully but when I tried flashing the modem and boatloader for the custom Rom, Odin would show fail again, I tried if on every port on my system and even unticked F.reset and auto-reset, but the result was still fail.
So I bought mobile odin pro to try out the stock again, it did install the stock but it was buggy, camera wasn't working, Mic wasn't working, the back button wasn't working. I just had to remove it. Currently am on Imperium 12.1 custom Rom( i installed it because it didn't require flashing modem and boatloader. The only problem is camera and Mic still won't work on this rom, but when I go back to the backed-up android 4.2.2 everything works fine. So yeah, that's my predicament. I am clueless as to what to do next so please help me out. I would really like to use a stock or custom Rom.
Am having a bit of an issue here, I followed the steps listed here to install a custom lollipop rom, I finally got my camera and microphone working after I flashed that Laneham but my wifi (which was working with the custom rom before) is refusing to work now. It won't come on. Is there any solution for that? Have tried doing a data reset and wiping my internal memory but to no avail.
adagiov said:
Flash custom touchwiz 5.0.1 Rom on sc04e
1 Update the Stock Rom to the lastest lollipop version:SC04EOMUGOI4
2. Make sure the soft-key can work. (if not, please refer to this post to solve the problem)
3. Flash Recovery. (CWM Recovery or Philz Recovery is recommended.)
4. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
5. Flash the custom touchwiz rom via cwm recovery, be aware of its version at 5.0.1 i.e Albe95 LolliROM 6.0 DEODEX & ODEX
6. Flash the Kernal for 5.0.1 in cwm recovery.
7. Reboot and Enjoy it.
Download
SC04EOMUGOI4 Link: https://mega.nz/#!hEZ3kQoT!UDugAgYis-NtshJorGu9slTDzACbR6EQPCf9vjrXeZg
Albe95 LolliROM 6.0 DEODEX & ODEX Link:https://mega.nz/#!KoRATJoK!1iXg0-hWGimgimWkvTIOzVjcP6bXyzxGSb0lmMQ_-RI
Kernal for 5.0.1 Link: https://mega.nz/#!wV5CWTxR!qXbJP2SOkjQgyn8izCL4OTo4RBqUi4nMGA-3_ebJ9OE
Click to expand...
Click to collapse
hefp: kernel SC-04E for miui 4.4.2 ?????
DaveHert said:
Am having a bit of an issue here, I followed the steps listed here to install a custom lollipop rom, I finally got my camera and microphone working after I flashed that Laneham but my wifi (which was working with the custom rom before) is refusing to work now. It won't come on. Is there any solution for that? Have tried doing a data reset and wiping my internal memory but to no avail.
Click to expand...
Click to collapse
If you want to use stock lollipop rom, you have to flash the lastest offical rom(SC04EOMUGOI4 ).
First, you flash the stock rom, you will find everything works well except back and menu button. If you have other problem(eg. wifi does not work), you may try flash the stock rom again.
Second, fix the back and menu button problem. You can find solution here.
Then, you can enjoy the stock lollipop rom.
If you want you try other custom rom based on lollipop rom. Please follow this post.
And you have mentioned, your odin did not work via PC, sometimes it is caused by usb cable. You can try with a replaced cable, buy one or two repalced usb calbe, and usually it will help you solve the problem.
If repalced usb cable can not work, you can try with other computers.
dunglt said:
hefp: kernel SC-04E for miui 4.4.2 ?????
Click to expand...
Click to collapse
Here is the Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
adagiov said:
This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!4JQQkT4S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.
Click to expand...
Click to collapse
Help: I need kernel miui v7 for sc-04e
adagiov said:
This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!4JQQkT4S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.
Click to expand...
Click to collapse
Mind you; Give me the kernel of SC-04E S4- v7 for MIUI 6.3.29 Kernel OB2 because I used the boot up on the all-black, wait 30 minutes still applies.
thanks a lot.
vitnamese fixed rom 4.4.2 is here password is 0915710079
http://4share.vn/f/7a494f484a4b434b/affiliate/2021884
problem is i cannot download this file, if some one can please let me know
HELP
hey brothers , can you help me to use xposed in my sc-04e docomo in 5.0.1 albe rom ?
and any one use docomo sc04e can use NFC ? tq. regards

Xposed install problem

Hi guys
When I try to install this xposed xposed-v69-sdk21-arm I keep getting stuck at the android lollipop boot screen. Am i using the right version?
Any help please, Im running 5.0.2
thanks for all time and help
I searched the forum and found this thread apparently I need these zips for stock 5.0.2 but i cant find them anywhere.
If anyone could help me i would appreciate it.
cheers
post #1
Download
XposedInstaller_3.0_alpha4.apk
xposed-v66-sdk21-arm.zip
flash the zip by custom recovery
wipe cache and dalvik
reboot
install apk
reboot again
done

need some help

Hi XDA i want to install cy 12.1 Lolipop 5.1.1 os in my Samsung galaxy grand || 7102 so my issue is i don't have a computer( it was a break) so i How can i install CWM recovery in my device? help me i need much!
If you want to install cwm recovery and flash cm 12.1 without pc ,i will guide you.
I think it is better to install T.W.RP instead C.W.M
HERE YOU GO :-
1)Root your device using kingroot orfarmroot.One of these apps should work for ur device.
If you dont know how to use these apps then ask me
2)Now lets say your device is Rooted,You have to install T.W.R.P.
Download image file of TWRP :- http://forum.xda-developers.com/showpost.php?p=65199538&postcount=69
Flash the image file by Rashr orFlashify app.
If you don't know how to use these apps then ask me
3)Now T.W.R.P is installed on ur phone.Now you are ready to flash a custom rom like CM 12.1
4) Dowload the ROM you want to and put it in external sd card.
5)Go to T.W.R.P recovery by hardare key combo.
Vo up +Power+Home
6)Take backup of your current ROM.
If some thing goes wrong ,then you can restore your stock ROM
7)Flash the ROM as instructed by the ROM devs.
Hoping it will help you.
thanx bro i install cwm with rasherflash tool nd i install properly cm12.1 on my grand 2 but i face issue about 2nd sim colling voice didn't come i set up both sim as a 3G network but still no voice from 2nd sim calling i need much help
raymond_bqg said:
If you want to install cwm recovery and flash cm 12.1 without pc ,i will guide you.
I think it is better to install T.W.RP instead C.W.M
HERE YOU GO :-
1)Root your device using kingroot orfarmroot.One of these apps should work for ur device.
If you dont know how to use these apps then ask me
2)Now lets say your device is Rooted,You have to install T.W.R.P.
Download image file of TWRP :- http://forum.xda-developers.com/showpost.php?p=65199538&postcount=69
Flash the image file by Rashr orFlashify app.
If you don't know how to use these apps then ask me
3)Now T.W.R.P is installed on ur phone.Now you are ready to flash a custom rom like CM 12.1
4) Dowload the ROM you want to and put it in external sd card.
5)Go to T.W.R.P recovery by hardare key combo.
Vo up +Power+Home
6)Take backup of your current ROM.
If some thing goes wrong ,then you can restore your stock ROM
7)Flash the ROM as instructed by the ROM devs.
Hoping it will help you.
Click to expand...
Click to collapse
Brother i facing big issue and issue was wifi drop i set as a never off wifi on sleep but when my device go to sleep mode downloding stop plz help me
mahu patel said:
Brother i facing big issue and issue was wifi drop i set as a never off wifi on sleep but when my device go to sleep mode downloding stop plz help me
Click to expand...
Click to collapse
On my cm 12.1 os grand 2

[Completed] Galaxy s7 flat stuck in "Echo Rom" Boot screen

I rooted a few days ago, yesterday I flashed Echoe Rom with FlashFire app. It was running beautiful after a few tweaks. Today I flashed xposed framework zip. After Flash it is now stuck in echoe boot screen. I am able to get into recovery but apparently I flashed it to the main hd instead of sd because when I do factory reset it is still showing echoe rom and still getting stuck in boot up. I tried to flash stock rom using odin and get a big fat fail!! I know, my name says it all...thats why I chose it. lol Any help would be greatly appreciated.
Hi !
S7 model have some more variants , I wanted to look for something related but I can`t without the exact variant
Anyway you can try re-flashing the rom you were using before Echo Rom or / and flash the xposed uninstaller
Good luck !

Categories

Resources