Its been more than a month that I have been researching to rectify my Phone's flash.
I download several tools like fastboot, adb etc (these two by the way disappears in a flip of second as I open them). My phone is hard bricked but By luck Its detectable under COM ports in device manager.
I have SP Flash Tool (Old and new version, both encounters the same problem during Flash process). when I flash it says "BROM ERROR: S_DL_PMT_ERR_NO_SPACE(5069)" which I think is a problem of eMMC. By research, I found either eMMC is corrupted or damaged or there is a partition overlap in there.
Also, formatting by means of SP Flash Tool, can't help it.
When I run a memory test in SP Flash Tool, it fails to complete eMMC Pattern Test.
Please, Help me out to bring my phone back to life!
Thank you.
Guys Please Help When I Was Using Sp Flash Tool I Click "Format All" And Now My Cell is not going to be charge and switch on please help me any member any body i have mt6575 device china android phone Model Coca Z1 Firmware due to corrupt firmware my downloading stops at 56% then sp flash tool give many errors now please help that how i can install bootloader in my android device again. my pc is not supporting that phone by connecting through usb cable even i have downloaded many corrected drivers and also installed when i was using sp flash tool it was working but after format all i ost my boot loader.:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Ulefone power 2 Development and Support-
Basic Device Details-
Display- 5.5 inch
OS- android 7.0 Nougat
Chipset - MT6757T
RAM- 4GB
Disclaimer-
Code:
i am not Responsible for any damage to Your Device..
official Firmware-
https://drive.google.com/drive/folders/0B8NC4kBpjQhYV1lWOEtYWThRRms
twrp Recovery-
https://drive.google.com/open?id=0B1aXJDZjE8bvM0h0aTVEOEdBS1U
SP Flash tools and Driver-
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Magisk-
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
No verity opt-Encrypt-
https://www.androidfilehost.com/?fid=673368273298927206
extras-
Greenify for Battery-
http://m.hiapphere.com/apk-com.oasisfeng.greenify
Build.prop tweaks-
[Must Backup official before try-
https://forum.xda-developers.com/attachment.php?attachmentid=4248841&stc=1&d=1503381757
Guide-
Flash Firmware-
1. Install Vcom Driver Run SP flash tools, Load Scatter File , Check Everything and then click Download, as soon as connect your Switched off Phone.
Flash twrp-
Code:
fastboot oem unlock
fastboot flash recovery recovery.img
or use inbuild script
if you have Scatter then you can Flash with SP flash tools.
Root-
flash Magisk via twrp or you can also use Supersu 2.78XX.
Mod-
Will be added Soon....:good:
version- 3.00XX
Credit- XN Logos
Donation- https://Paypal.me/droiddeveloper
Please Don't create mirror Without the Link of This Page.
I tried it but it didn't work. twrp is installed but my phone doesn't boot into the system anymore. When I reboot it goes back to Twrp and then the touchscreen doesn't work anymore. I have to connect an USB-mouse. But it still doesn't boot.
When I try to flash or wipe sth it says "unable to mount"
I had to flash the original software again with SP Flash Tools
No flash No verity encrypt to Disable boot verification
XN Logos said:
No flash No verity encrypt to Disable boot verification
Click to expand...
Click to collapse
sorry but what does that mean?
So i used your TWRP Recovery, normally it should work and it does but why is my data shown as 0.
Thank you too. Please help
where is the scatter file?
gasperoni said:
where is the scatter file?
Click to expand...
Click to collapse
no Scatter included use Fastboot, or You can take scatter from ROM.
Ok but where is the recovery image file to flash via SP Flash Tools? I only see an exe-file saying "flash recovery" and a 12.6MB file called "rk" but it's shown me as a mp4-file
it worked!!! Thank yoU!! @gasperoni, just start "Flash Recovery.exe" and do what is written in the window. It's really easy.
i have include a Script which have ability to unlock bootloader and then flash twrp, if you flash with SP flash tool your Device not bootup because bootloader is Loacked. so Simply use Given Instruction Not SP flash.
any custom ROM
non yet
hm..i install twrp with your "flash recovery.exe", my phone reboots, i have to press "volume up" to unlock my bootloader. then trwp starts.
until here everything works fine. But when i am installing Superuser and restart my phone, it writes sth like "orange mode, your phone is untrusted" and just boots into twrp, touchscreen isnt working. So i have to flash it again, but i didnt achieve twrp of course :S
Unlucky25 said:
hm..i install twrp with your "flash recovery.exe", my phone reboots, i have to press "volume up" to unlock my bootloader. then trwp starts.
until here everything works fine. But when i am installing Superuser and restart my phone, it writes sth like "orange mode, your phone is untrusted" and just boots into twrp, touchscreen isnt working. So i have to flash it again, but i didnt achieve twrp of course :S
Click to expand...
Click to collapse
Same issue for me.
I tried twice to install the recovery with the .exe file. Both times I bricked the phone. Why?
kylebutler said:
Same issue for me.
I tried twice to install the recovery with the .exe file. Both times I bricked the phone. Why?
Click to expand...
Click to collapse
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash software says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.
ml11ML said:
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash softwhttps://forum.xda-developers.com/usercp.phpare says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.
Click to expand...
Click to collapse
I had also issues using the flash tool provided on the Ulefone website, the same as you say (with the checksum). None of checksum-generating software worked for me, so I was searching long for an alternative and found this flash tool: https://spflashtool.com/. Using this tool, flashing worked for me perfectly even without having to bother with checksums.
Good luck!
pavelmracek said:
I had also issues using the flash tool provided on the Ulefone website, the same as you say (with the checksum). None of checksum-generating software worked for me, so I was searching long for an alternative and found this flash tool: https://spflashtool.com/. Using this tool, flashing worked for me perfectly even without having to bother with checksums.
Good luck!
Click to expand...
Click to collapse
Thank you very much for this! That tool works flawlessly unlike the ulefone garbage.
On another note... anyone know if there is source code for the power 2 to be found somewhere or did the dev just port another recovery somehow? I tried a while back just porting twrp by swapping files but i couldn't get the image to repack with the kitchen tool so i gave up.
ml11ML said:
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash software says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.
Click to expand...
Click to collapse
hey, how did you set your IMEIs after bricking? I usually used Engineer Mode to set them, but thats not working since i am missing "CDS Information"
Unlucky25 said:
hey, how did you set your IMEIs after bricking? I usually used Engineer Mode to set them, but thats not working since i am missing "CDS Information"
Click to expand...
Click to collapse
Uh, i never even bothered to think about imei as it just worked without doing anything.
ml11ML said:
Uh, i never even bothered to think about imei as it just worked without doing anything.
Click to expand...
Click to collapse
ok nevermind, i found a solution..yeyy
so if anybody stumples across here, who has no IMEI set, CDS information in MTK mode and no rooted phone... u can set your IMEI in MTK engineering mode under "GPRS"!
Hi,
I flash unnoficial twrp into my doogee s88 pro using this command
Code:
fastboot flash recovery twrpname.img
Then I dind't flash Vbmeta and now my doogee is in infinite loop (is restarting all the time) and I can't acces to recovery mode pressing volume up + power either volume down + power.
I tried to connect to PC to send fastboot commands but doogee is in automatic reboot all the time and I can't send any command.
In the screen appears:
Orange state
Your device has been unlocked and can't be trusted
Your device will boot in 5 seconds
With SP Flash Tool I can format whole flash and now I'm try installing a ROM stock with SP Flash Tool.
I can format whole flash connecting USB cable in power on exact moment, and SP Flash Tool has been able to format flash.
Now I have problem with Download the stock firmware. I download from differents websites but in all situations SP Flash Tool have an error 50005 (firmware not comtabile) and 10001 (DA or Auth virification failed)
I keep trying to revive the doogee
My S88pro is also in infinity loop. I didn't do nothing. From one day to another it loops. Does anyone has a solution. Need to access a wallet. Can't find my private keys.
bambo1543 said:
My S88pro is also in infinity loop. I didn't do nothing. From one day to another it loops. Does anyone has a solution. Need to access a wallet. Can't find my private keys.
Click to expand...
Click to collapse
The first task that you don't have to do is FORMAT with SP Flash.
Although mobile are in infinete loop you can flash original firnware with SP Flash tool, but you lost everithing.
With SP Flash you can read all flash memory and separate the different partitons, but I try many times unsuccessfully.
What is the type of nand memory you have? Emmc or ufs?
I have an oppo a91 CPH2021, from my friend. He tried to Unlock bootloader without any success and leaving it in an unbootable state. I would like help to FULL flash the device, as if it was blank and or a dump of every on of the partitions both emmc and ufs. For some reason when i go to flash the combo ufs/emmc partitions from the .ofp or .ozip, it switches from combo to ufs and only flashes the ufs part. Any advice on this issue would be massively appreciated.
Apparently no vbmeta partition. I also read i could possibly need to write preloader to emmc memory.