Relocated from email discussion:
Hey, great tool[editorial: I think in reference to: http://code.google.com/p/cdmaworkshoptool/ ]. Would it be possible for me to get a copy of the most recent build? I'm looking into some things on the galaxy s3 because we lose the min and phone number on non-stock roms. -C
to C:
Most recent build is .2 which is public.. What exactly do you mean by lose? As in they must be reprogrammed after.a rom is flashed? Does the, normal version of dev term you have downloaded fail to write the number back?
3:39 PM (2 hours ago)
to me
It's a temporary problem with cm10. Development has been slow. It's lost on the first reboot and then mms doesn't work. In android, under status about it lists "My Phone Number" as unknown and Min as unknown. Just trying to see if I can write them while the OS is booted.
to C:
To write a mdn and min typically you would connect to the phone in diagnostic mode.. Send mode offline. Send spc. Then simply write mdn and min from the nam part of the interface.. There are typically three nv items which dev term writes for mdn, and min. Then, mode reset will reset and you can confirm if this wrote the nv item..
Did that answer any questions?
to C:
Having never tested a galaxy s iii I'm not sure if devterm should work... There is alot of chatter online about a program called ets, you might look.for that if devterm doesn't work. Please let me know if you are able to successfully write on the galaxy siii.
to me
We are able to write to it with qpst. I actually got the numbers back, but I'm not sure how. Now Im in the process of seeing if I can figure out how to replicate it. What is supposed to happen when you put it into reset mode? It doesn't work for me after that.
to C:
After mode reset the radio of the phone will literally reset.. Some phones this will actually turn off and on the whole phone.. Some will just show no.service temporarily... After mode reset.cdmadevterm will disconnect.from phone.. There are alot of variables, but typically if.qpst could write the phone devterm should also be able.. The mdn and min are really quite simply three nv items, I suspect the subsystem that normally stores this information is being overwritten or formatted by cyanogen...
if you have ever used cdma worksop or qxdm the mode offline and mode reset is functionally the.same..
to me
Thank you so much for going back and forth with me on this. I really appreciate it. The only major difference I noticed between an nv dump on stock and cm is that cm has a lock code for some reason. What is this ETS software you're referring to? CDMA workshop is a bit too expensive unfortunately.
Although I am not totally familiar with the tool it is linked on XDA in another section:
http://forum.xda-developers.com/showthread.php?t=1696621
I wonder if this might have something to do with the chipset not being qualcomm? On the other hand if you said it worked with qpst maybe they are somehow compatible?
The VIA tool probably won't work since we do have a qualcomm chipset. I still have not figured out how i managed to get it to work once but it came up with the unlock sim message I put in the code for my phone that I Found in nvram and then I tried the spc and a few other things and eventually hit dismiss. It said that it could not connect or something to that effect. Then I checked and it had my phone number as 000-000-xxxx which xxx was that unlock code. Then I restarted and I had the number again. I'm wondering if I somehow got the phone to let go of how its storing the phone number.
Hm. If it is qualcomm I would think that cdmaDevTerm should work... this is how one would normally write the mdn and min with devterm:
http://www.chromableedstudios.com/techninjutsu/howtowritemdnminwithcdmadevterm
Perhaps if this doesn't work you could include the response to the NV write from the LogQ tab to help understand the behavior? Maybe the rom is activating a different Nam profile or something?(I'm not sure if I even have a spot on the UI for that in devterm but a log might help understand)
(for logging purposes you may want to trying writing a fake phone number for privacy)
I guess my question also is: are you trying to figure out why the rom does this? or just a good way to fix it when it does?
I came across an HTC 8X at my work, and it's stuck in demo mode. I've tried to boot the phone, and one of two things happen. I either get a exclamation point and then the phone reboots or I get a menu with the IMEI, SN number etc. I've tried to wipe the phone from settings and the only thing I am able to do is "update demo phone". There is a application stock on the phone called Microsoft Retail Mode which requires an RAC code. It also gives me the option of an admin password. I am unsure as to where to get these codes/how else to get this thing out of demo. Any help would be greatly appreciated.
(I'm unable to flash the ROM as well)
I don't know if you saw this, but it looks like someone did a hard reset, and it took it out of demo mode...perhaps that would work?
http://forum.xda-developers.com/showpost.php?p=41593797&postcount=10
Hello everyone,
I come to you with a very strange case, which I have yet to find elsewhere on the web. I hope one of you guys can help me with this...
I'm trying to unlock my LG-p500 phone, I paid for an unlocking code and was ready to follow the instructions to unlock it. I was expecting for a window to pop after typing the first code (2945#*500#), but nothing happened, I tried to enter a different sim card from a different provider and it didn't displayed "phone restricted" as it was supposed to (according to instructions and different forums), but it simply displayed "No service" and "Emergency calls only". I also tried to type 2945#*71001# to get the menu but again... the phone didn't responded to any of these codes (I'm now observing that actually the phone does not respond to many of the secret codes of LG-p500 and Android as well, but it does responds to a number of them, such as *#*#4636#*#*)
Ever since then I've tried SO many things to work it out. I rebooted, unrooted, rooted again, formatted, recovered, installed custom roms, reverted to the original rom, software updated, I almost bricked my phone while trying to get this done but nothing seemed to work. I figured to try to get that menu in a friend's LG-p500 phone, unmodded in any possible way, and surprisingly the window to input the code still did not appeared and it didn't responded to any of the codes above.
It made me wonder of whether the provider had blocked the option of entering the codes, as me and her are with the same phone from the same provider, getting similar results.
I searched for hours for a solution to the problem but with no luck. I would really appreciate getting some help with this, as i'm totally clueless of what to do next. I will be very grateful for any response.
Much thanks!
Shay
Shuye said:
Hello everyone,
I come to you with a very strange case, which I have yet to find elsewhere on the web. I hope one of you guys can help me with this...
I'm trying to unlock my LG-p500 phone, I paid for an unlocking code and was ready to follow the instructions to unlock it. I was expecting for a window to pop after typing the first code (2945#*500#), but nothing happened, I tried to enter a different sim card from a different provider and it didn't displayed "phone restricted" as it was supposed to (according to instructions and different forums), but it simply displayed "No service" and "Emergency calls only". I also tried to type 2945#*71001# to get the menu but again... the phone didn't responded to any of these codes (I'm now observing that actually the phone does not respond to many of the secret codes of LG-p500 and Android as well, but it does responds to a number of them, such as *#*#4636#*#*)
Ever since then I've tried SO many things to work it out. I rebooted, unrooted, rooted again, formatted, recovered, installed custom roms, reverted to the original rom, software updated, I almost bricked my phone while trying to get this done but nothing seemed to work. I figured to try to get that menu in a friend's LG-p500 phone, unmodded in any possible way, and surprisingly the window to input the code still did not appeared and it didn't responded to any of the codes above.
It made me wonder of whether the provider had blocked the option of entering the codes, as me and her are with the same phone from the same provider, getting similar results.
I searched for hours for a solution to the problem but with no luck. I would really appreciate getting some help with this, as i'm totally clueless of what to do next. I will be very grateful for any response.
Much thanks!
Shay
Click to expand...
Click to collapse
The device's hidden menu is only accessible thru stock ROMs and the stock dialer.
shinobisoft said:
The device's hidden menu is only accessible thru stock ROMs and the stock dialer.
Click to expand...
Click to collapse
I figured that, that's why I've also tried to access that menu via an unmodified LG p500 phone, which probably still runs the stock rom but I couldn't access that menu through that phone as well.
I'm starting to conclude that my phone was already unlocked from the provider itself, and perhaps that is the reason why I cannot access that menu again.
Is there a way of assuring that my phone is unlocked? I figured that I can use other sim cards from other Israeli providers, I thought there were two types of locks (that's what they told me in customer service), so if I can use sim cards from other local providers, does it mean that I can also use the phone for sim cards from international providers as well?
Thanks!
Greetings to all the developers and registered users on this site... Yes, this is my first post, but I read here pretty often and I used the search function, trust me! Seriously, I've tried all I could and I am at my wits end, but this is technology, we can't let it own us, we gotta continue owning it and that's what online communities like xda help us do, so thanks for all your past, present, and future contributions here. So I got this Metro PCS Kyocera Hydro Wave (C6740N) that I can't factory reset for a number of reasons, but mainly because I believe that there is either no boot-loader or no recovery partition as a result of Metro PCS flashing the ROM...
Anyway, lets get to the juice:
- Device powers on/off, but no combo of Vol -/+ and Power buttons bring up a recovery menu or anything (holding any combo down just boot-loops)
- Device has no SIM and no micro SD card, and the battery is not removable
- Device is locked... Like, pattern-locked/google account info/too many attempts/yada yada yada
- Device has no data and no WiFi connection active, so I could not use the google account to get past the lockscreen
- Device does not have USB debugging enabled/Google drivers for ADB do not work (Windows 7 auto-detects when I plug in the phone and installs a generic Microsoft driver which cannot be removed even after uninstalling the device, and also I pointed the Device Manager to the correct Google drivers I installed with the Android SDK Tools, as well as the Samsung Naked Universal Drivers I found on this forum, and Kyocera ADB drivers I found through Google which all failed, Windows returned a message stating that the most up-to-date or best driver for this device is already installed)
What I've tried (everything possible really):
- Hard reset/Recovery from phone: FAILED
- Connect to Linux and install ADB, then tried running the adb shell, adb devices, fastboot devices, etc but phone not detected: FAILED
- Connect to Windows 7 and install ADB (Android SDK Tools), I literally checked every single box and installed Platform-tools, google drivers, everything, got to the command prompt as admin, cd to the ADB directory, ran same commands as in linux, also tried commands on several forums and posts like adb shell rm /data/system/gesture.key to remove the lock but everything: FAILED
- Connect to Windows 7 and attempt to install proper drivers using RootGenius, MoboRobo, PDAnet, and several other suggestions which all were oblivious/unable to detect the device despite Windows recognizing it, so they all: FAILED
- Connect to Windows 7 and attempt running ADB through a Cygwin terminal, but the command "sudo" was not recognized/not valid, so: FAILED
- Connect to Windows 7 and use XRYViewer to extract data from the phone, possibly to see the system files and get an actual understanding of what everybody is saying you need to mount from the recovery partition, but no clue how to use this, since I can't find an XRY file in the internal storage, so: FAILED
- Connect to Windows 7 and access data/recover data from device using "Wondershare Dr.Fone for Android" and "iLike Android Data Recovery Pro" but both programs instructed me to enable USB Debugging, which is not possible, so the both also: FAILED
Despite this being my first post, I have scoured the forums here in addition to every other forum and webpage regarding this issue as well... There just isn't much about this phone except negative reviews, and I have come to the conclusion that on this particular model phone, I am out of options... I have a paperweight... I'm not very familiar with Android... So please correct me if I'm wrong...
Any input?
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...
Mojo2XL, I guess you did not find an answer?
Mojo2XL said:
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...
Click to expand...
Click to collapse
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..
barabeka said:
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..
Click to expand...
Click to collapse
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls
elliwigy said:
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls
Click to expand...
Click to collapse
okay. i will try something, when my phone will come. is your Wave locked?
barabeka said:
okay. i will try something, when my phone will come. is your Wave locked?
Click to expand...
Click to collapse
i bought another phone and they threw it in free but it has a pin code lock so i cant even get to google screen to bypass frp as im stuck at pin lockscreen and these darnphones have no recovery..
i doubt ull figure out a way as im real savvy with this stuff lol theres no recovery to boot into in order to reset and no way to update tje phone wothout knowing the pin code
any luck? i cant believe this thing is this locked down. makes apple look like chils play
warriorpluto said:
any luck? i cant believe this thing is this locked down. makes apple look like chils play
Click to expand...
Click to collapse
i believe it can be done with a pc
Did you happen to get the files the other member posted that was only available for eight days?
Mojo2XL - Sort of.
I saw a youtub video (sorry no link) that says there was a OTA update that changed the phone's firmware that solved all the problems mentioned here. Thing is I have no carrier and cannot find this new firmware, but, I am still hunting....
eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse
I'm having the same problem, I have been trying to get this thing to hard reset for a week now. There has to be a way to reset this Hydro Wave.. Has anyone dealt with this thing?
Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it
WhiteWolf77 said:
Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it
Click to expand...
Click to collapse
That doesn't work on this phone the hydro wave from AT&T has factory reset protection so it cannot be reset using the volume down and power button reset
Any update?
dannybz said:
Any update?
Click to expand...
Click to collapse
let me work on this, been trying to master as many FRP bypasses as i can. I don't have the device but a client is in the same boat
I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.
PhoneScrambler said:
I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.
Click to expand...
Click to collapse
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear
I'm new to this forum, but NOT new to this site . I have visited here on numerous occasions seeking the help that needed . With that being said, I would like to offer a Bonafide, Tried and True way to factory reset the Kyocera Hydrowave . I KNOW that this work's for I have done in on numerous occasions for a friend of mine that works for Metro PCS ....
Step One: Completely power off the phone .
Step Two: Hold the Power AND Volume DOWN Buttons SIMULTANEOUSLY .
Step Three: DO NOT release any buttons, even when you get to the Boot Menu . (Very Important, If you don't do it right, you have to start all over lol ) .
Step Four: Once inside the Boot Menu, ONLY release the Power Button; or the Boot Menu will close and you have to start all over again .
Step Five: Use the Volume Down Button to Highlight the Wipe/Factory Reset Option .
Step Six: Use the Power Button to Select the option .
Step Seven: Watch the bottom of the screen for the progress, and then use the Volume Up Button to restart .
And there you have it . I hope that this helps out SOMEONE out there, because I feel good giving back for the help that I have received on here .
PS.( If you would like for me to post a Video Tutorial on this, can someone please tell me how to post the Video; I guess by me being a Newbie on here, I'm not allowed to do as of yet ) . If Anyone needs to contact me, as I'm not on here very often, my email is [email protected] .
LilAnt530 said:
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear
Click to expand...
Click to collapse
As unrealistic as it may sound it actually works Trust me on this. its similar to the LG attack which... is nothing but entering a long password.
betanews.com/2015/09/16/bypass-the-android-lollipop-lockscreen-by-entering-a-really-long-password
Just give it a go. it already worked for one dude on youtube. it takes a while but it honestly works. If you can get it, update the phone as soon as possible turn the screen timeout off and let it update. when the phone resets the update will install and you will be able to factory reset.
I mean it couldn't hurt. if you're locked out with no factory reset and ADB tools won't work what else can you do?
Hello, I'm Andrea & Im pretty new & a bit nervous to attempt some of these steps. But I very much need some help please.
I have the Moto G Stylus XT2043-4 {2020, I think} through Metro PCS, we've got 3 of these identical phones. However 1 of them is NOT BOOTING UP Correctly. {Using chat with Motorola rescue assistant, they stated: Phone has A/B Slot boot failure, & it is in AP Fastboot Flash Mode (Secure) & only way to fix is to Completely Reset & Start From Scratch.
You see this is My Daddy's phone, who Passed Away on March 6th... & I Desperately Don't Want To Completely WIPE ANYTHING as in User Info/Data if at all possible. So I'm turning here in hopes of assistance to SAVE My Daddy's Stuff that's on his phone.
I have read and attempted the advice/info in some of the threads here & I frankly get a little confused and a bit more nervous when it comes to things here {commands/input correctly} BUT I HAVE TO TRY. Also I am UNABLE To Do Anything as far as Switching USB Connection Type, Debugging, or Enable ADB, from the phone screen or when connected to pc. I feel like I literally need baby steps & entirely walked through this process PLEASE???
I'll post a couple pics of what screen says currently as it attempts to power up, hopeful this will help anyone willing to help me here.
Thank you for reading this longa** post & any attempts to assist me are very greatly appreciated, as I just can't bear to Ruin the last of my Daddy's pics & things from his phine, it is literally the only thing my son & I have left of my Daddy...
Feel free to message me if needed if any possiblity to help.
Love & Light,
Andrea
Moto G Stylus {2020}
Model: XT2043-4
Carrier: Metro PCS
Firmware: SOFIA_T_QPRS30.80_64_6_6_5_2
DenaliRyda said:
Hello, I'm Andrea & Im pretty new & a bit nervous to attempt some of these steps. But I very much need some help please.
I have the Moto G Stylus XT2043-4 {2020, I think} through Metro PCS, we've got 3 of these identical phones. However 1 of them is NOT BOOTING UP Correctly. {Using chat with Motorola rescue assistant, they stated: Phone has A/B Slot boot failure, & it is in AP Fastboot Flash Mode (Secure) & only way to fix is to Completely Reset & Start From Scratch.
You see this is My Daddy's phone, who Passed Away on March 6th... & I Desperately Don't Want To Completely WIPE ANYTHING as in User Info/Data if at all possible. So I'm turning here in hopes of assistance to SAVE My Daddy's Stuff that's on his phone.
I have read and attempted the advice/info in some of the threads here & I frankly get a little confused and a bit more nervous when it comes to things here {commands/input correctly} BUT I HAVE TO TRY. Also I am UNABLE To Do Anything as far as Switching USB Connection Type, Debugging, or Enable ADB, from the phone screen or when connected to pc. I feel like I literally need baby steps & entirely walked through this process PLEASE???
I'll post a couple pics of what screen says currently as it attempts to power up, hopeful this will help anyone willing to help me here.
Thank you for reading this longa** post & any attempts to assist me are very greatly appreciated, as I just can't bear to Ruin the last of my Daddy's pics & things from his phine, it is literally the only thing my son & I have left of my Daddy...
Feel free to message me if needed if any possiblity to help.
Love & Light,
Andrea
Moto G Stylus {2020}
Model: XT2043-4
Carrier: Metro PCS
Firmware: SOFIA_T_QPRS30.80_64_6_6_5_2
Click to expand...
Click to collapse
Unfortunately, I don't think there is any way to get data off of the phone.
The only thing that might be possible, is if he backed up the photos with google photos, and he signed in with another device like a PC.
You could use the PC to access the photos.
https://photos.google.com
sd_shadow said:
Unfortunately, I don't think there is any way to get data off of the phone.
The only thing that might be possible, is if he backed up the photos with google photos, and he signed in with another device like a PC.
You could use the PC to access the photos.
https://photos.google.com
Click to expand...
Click to collapse
Thank you for your info & thought; sd_shadow...
However, my Daddy was 80 years Young & barely able to use this device & had never laid a finger on any other type of system, computer, etc... I tried to show him how to use a tablet once as his TV remote went out & hid TV had an app to utilize in replacement until the company dould bring him another TV remote once the weekend had ended but he wasn't too comfortable with that so I had to scurry and figure out how to reprogram his scrambled TV remote quickly or else he'd planned to stay on the same annoying TV channel all weekend... Infomercials & all...
thank you anyways, I'm holding into hope there's gotta be someone out here in techi~land here who can give some help... Sure,y someone somewhere.... Thank you very much though... Have a positive evening...
I think if you remember his pin or pattern you would be able to flash and use TWRP to access and backup his data on an external SD card and then reflash the rom on the phone and then restore his data back.