Database Info

Carbon Rom[DISCONTINUED]

CARBON 4.4.2​
BASED ON CONCEPT "X"​RECOVERY TO FLASH THIS ROM​
About Carbon​
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use the code on CarbonDev GitHub. and on our Gerrit CarbonDev Gerrit.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
Features
All of our features can be found on the site here:
Carbon Features
Carbon Updates
Join us on these Social Media Channels to keep yourself up-to-date on all the latest Carbon news, updates, contests, and more! Join our completely open Google+ community for insider conversation with devs and other users.
Download Carbon
Carbon Rom V0.1
CHD_TO_A110Q_carbon_ConceptX.zip
Gapps
Ultra Slim Gapps
Instructions
* Download the ROM and GApps
* Reboot to recovery (CWM 6.0.4.4 only )
* Wipe data/factory reset
* Flash the ROM and then CHD_TO_A110Q_carbon_ConceptX then GAapps
* Reboot your phone
* Enjoy
What works:
- Network for phone calls (useless since no audio)
- Mobile data
- WiFi
- Sensors
- GPS
Bugs
1. No hwcomposer
2. SystemUI FC when msim is turned on
3. No Audio
4. No Bluetooth
5. No camera
4. FM and all other bus on CM11
THIS IS A WIP.
Changelog
For a detailed changelog, check out the changes made each night here:
Carbon Changelog
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon and my other roms better with every release. Your support means the world to us! If you've enjoyed Carbon and my other roms, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon and my other roms!
Credits
@kashifmin
@chrmhoffmann - for his MT6589 device tree and hacks
@Dr-Shadow - for MT6589 patches
@Xplodwild and OmniROM team for their hard work
Special thanks to Carbon ROM developers
Source:
1. Rom Source : https://github.com/CarbonDev
2. Kernel Source : https://github.com/kashifmin/KashKernel_4.2
XDA:DevDB Information
Carbon Rom 4.4.2, ROM for the Micromax Canvas 2 Plus A110Q
Contributors
digyvijaykumar123, kashifmin
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Carbon
Version Information
Status: Alpha
Created 2014-05-21
Last Updated 2014-08-20

gr8 work man

good job man thumbup....

grt
U really working hard bro...grt work again...

looking awesome bro

ROM Link not downloading
ROm not going to download I try many browser but not showing in chapter text check bro please upload every file in mega upload this rom is mega also
https://mega.co.nz/#!GxAm2AwL!l5-xCF0x1Nh69Sio5liPJUOYluIkGQUt-gob1zkpWcA

[ROM][4.4.4] MoKee OpenSource Project [UNOFFICIAL]

Disclaimer:
Code:
All the firmwares, custom ROMs, official firmware updates, mods and tools mentioned here belong to their respective developers/owners.
You will be doing everything at your own risk.
We nor the developers cannot be held responsible if you end up damaging or bricking your device.
Introduction:
MoKee OpenSource is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion.
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Read here for developer application; with this, you can host your unofficial MoKee builds on our server!
Features:
Odexed for faster performance (only in official releases, nightlies are deodexed)
Incremental updates
OTA updates - update on the fly!
Native exFAT support (Samsung devices only)
ListView animations
Multi window
Calendar - with lunar and solar calenders
Lunar calendar in lock screen
Task switching sidebar in recent apps (the list will increase if you install supported apps)
Bulk SMS recipients
Adjustable SMS font size
SMS sending delay
Smart dialing
Speed dialing
IP dialing
Custom carrier name
Network speed in status bar (upload and download!)
Built in timer in Apollo - determine when to stop playing music
MoKee Setup Wizard
Active Display
Adjustable navigation bar height
Unique Power Saver functions!
Custom screen off animations
** Not yet merged
PIE control
Auto hide status bar
Smart capture
Preview option in launcher (similar to the preview function in launchers found in Play Store)
Many more! Since we are constantly adding new features, see changelogs to keep updated!
Links:
Official Site:
http://www.mfunz.com
Google Plus Community (join us for faster response!):
https://plus.google.com/communities/...88317801966872
Statistics:
http://stats.mfunz.com
Bug Tracker :
http://issues.mfunz.com
Changelog :
http://changelog.mfunz.com
GitHub
http://github.com/MoKee
Kernel and device Sources:
https://github.com/sandymanu
Code Review:
http://review.mfunz.com
Download Link:
BUILD1 (10-22-2014)
MoKee Gapps (4.4.x):
http://www.androidfilehost.com/?fid=23329332407566631
BUGS:
- Second sim not working ( modem2 doesn't boot, work in progress)
- all other bugs in CM11
Installation Instructions:
Important note :
Two things are important for this ROM to be installed
First install the Philz recovery from here and install it ( Install it only using SP tool. Don't install using MobileUncletools )
After downloading the ROM unzip the ROM and open system/build.prop using Notepad++. Search for this line persist.radio.multisim.config=dsds and change dsds to none. Now pack the ROM back as zip and flash it using the regular steps as usual.
1. Wipe data/factory reset
2. Format /system
3. Flash ROM
4. Flash MoKee Gapps
5. Reboot
Issues with themes:
Please refer here: http://forum.xda-developers.com/show....php?t=2577469
Credits:
- MoKee Developers: http://www.mfunz.com/en/contributors
- CyanogenMod
- AOSP
- Koush for open-sourced SuperUser
- ParanoidAndroid for HALO
- Slim Roms
- OmniROM
- @chrmhoffmann, @Dr-Shadow, @XpLoDWilD and all others who made major contributions to bring 4.4 to MT6589
- kashifmin
XDA:DevDB Information
[ROM][4.4.4] MoKee OpenSource Project [UNOFFICIAL], ROM for the Micromax Canvas Magnus A117
Contributors
Santhosh M, kashifmin
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Cyanogenmod,AOSP
Version Information
Status: Beta
Created 2014-10-23
Last Updated 2014-10-23

Screenshots please
Sent using XDA Free mobile app

good work
I thought this ROM yesterday and u compile great work bro
HTML:

DevendraMilmile121 said:
I thought this ROM yesterday and u compile great work bro
HTML:
Click to expand...
Click to collapse
Thanks for the feedback

Status 7 Error
I have followed each step and also changed build.prop file as mention and while trying to install this ROM it is giving me status 7 error aborting installation.
I have Moded EBR files for internal memory increase that might be the reason why ROM giving this error.
Cannot use this rom any solution for the same.

dykhatri said:
I have followed each step and also changed build.prop file as mention and while trying to install this ROM it is giving me status 7 error aborting installation.
I have Moded EBR files for internal memory increase that might be the reason why ROM giving this error.
Cannot use this rom any solution for the same.
Click to expand...
Click to collapse
You have to use the Philz recovery mentioned in this thread only. No previous Philz and u should install via SP Tools only

Error: Bluetooth share stopped working
hii bro..
i flashed this rom as u mentioned with the philz recovery from this thread. Once it booted up an error message popped up telling "bluetooth share stopped working" with an ok button.. It continuously appears and i am not even able to touch the setup.. I tried flashing 3 times and i found no change.. So i flashed cm11 again

[Volte] [Oreo] Ground Zero Roms |Validus|Tesla|Tipsy [Lettuce]

he All-In-One thread for Ground Zero ROMs -Validus, Tesla,*and Tipsy
Brought to you by :
[https://img]
Ground Zero ROMs
Notes from the OfficialGoogle+ Community:
About the ROMs :
Validus is*GZ-AOSP*(Fancy name of AOSP-CAF?) based with a*Dark Wolfie theme*with*full OMS support*and has a lot of features.
Tesla is*GZ-AOSP*based with*full OMS support*and has handpicked useful features.
Tipsy is based on*Slim*with*full OMS support. Please flash responsibly*[https://forum]
G+ Community
https://plus.google.com/u/0/communit...59573276360638
Substratum G+ Community
https://plus.google.com/u/0/communit...17366580091389
Substratum Theme Compilation, which includes Tipsy Status Bar overlays, thanks to Jimmy Setiawan
https://www.dropbox.com/s/e1an28cun2...Theme.apk?dl=0
Theme Ready and TBO apps
http://forum.xda-developers.com/show....php?t=3113192
http://forum.xda-developers.com/show....php?t=2283828
GZR TWRP Themes
https://onedrive.live.com/?id=67559C...559CDE482EDC1E
George's Validus, Tesla and Tipsy TWRP themes
https://plus.google.com/114004832310...Bd89V?sfc=true
https://plus.google.com/114004832310...ts/AEpG9Sgpbmc
https://plus.google.com/114004832310...yk1aC?sfc=true
GZR Telegram Desktop Themes
https://plus.google.com/PeteBest444/posts/e7tgodAFSon
Installation Instructions
ALWAYS MAKE A NANDROID BACKUP FIRST!
Reboot to recovery
Wipe system, cache,*dalvik/art cache, data
Flash rom zip and gapps
Don't flash SuperSU. Magisk*is preinstalled for root
Reboot
Updating from a previous build/dirty flash:
Wipe system, cache, dalvik/art cache in recovery
Flash rom zip, gapps and any other zips you may use
Reboot
Never dirty flash from one*rom to another
Substratum support is there as long as you have root and latest Substratum app.*Some themes may have a little catching up to do, have fun testing them!
If you have any issues, grab a log after a clean flash, upload and link here please. Add steps to reproduce the issue in your post.
Do not report issues dirty flashing this over some unofficial build or with some kernel flashed.
Logcat Extreme app is great as you can choose to start recording a log just before reproducing an error and stop recording just after so you log just the part you need.
Xposed is not supported*here, if you want to run it and have issues, try an Xposed thread for support and bug reports here only welcome with a clean install with no Xposed present.
Make sure to state which rom you are running when asking for support
Dynamic Gapps
http://forum.xda-developers.com/show....php?t=3487192
Open Gapps
http://opengapps.org/
Downloads
Gzosp : oreo + volte
=
https://www.androidfilehost.com/?fid=817906626617943793
( final oreo build because it was a bringup of ground to zero ROMs )
Bugs =none
tester find all things working
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~
Tesla : nougat
=coming soon (maintained by @ravi
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~
Validus : nougat
https://www.androidfilehost.com/?fid=673368273298980139*( maintained by me)
Bugs = none found
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~
Tipsy : nougat
= coming soon[emoji769] (maintained by*@gh0st_RideR
Source Code:
https://github.com/GZR-ValidusOS
https://github.com/TeslaRom-N
https://github.com/TipsyOs
[https://img]
Source Code:https://github.com/TeslaRom-N
ROM OS Version: 7.x/8.x
ROM Kernel: Linux 3.10.x
Based On: AOSP +CAF/ Slim
KernelSource:-https://github.com/lineageos/android_kernel_cyanogen_msm8916
Credits -*all my great friends*[http://forums][http://forums]
Also the owner of gzosp =*@martinusbe
A little about our*TEAM*EXTREME
We are a small team of NOOB devs
Members Of Our Team =[http://forums] @ravi9967* @Prashant Maheshwari* @shrayansh*
@nithin chandra*
@nsytechno
@gh0st_RideR*
and our tester @Rishikesh S*
#StayXtreme
This ROMs is compiled and maintained by Team Xtreme
Sent from my YU5010 using Tapatalk

Hi does it work with yu5010 ? Most of other rom installs but after flash touch is not working. Pls repply soon. Thanks in advance.

[ROM] AICP-ROM [14.0] [Pie] 9.0.0 [Stable]Unofficial 17-01-2019

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we are now based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
If there are any bugs, either we will sort them out or the GZOSP team, if it concerns their code base. This ROM isn't GZOSP supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 14.0
Download link: https://androidfilehost.com/?fid=11410963190603902341/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, pico/nano GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 28.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure might vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
The root solution can be flashed together with every OTA update (= ROM Update).
Currently supported Root Solution:
Magisk stable
Magisk versions >= 17.2 don't usually require to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time.
Unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
To be able to flash using the built-in OTA app, TWRP recovery is needed.
Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
Put the Github link to your kernel HERE (mandatory), not posting the kernel source violates the GPL, and also violates the rules on XDA ...
Device tree source:
Vendor source:
Put the Github link to your used vendor HERE. This is also not mandatory, but might help users.
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
Contributors:
(mention all the devs who have contributed to your device tree, kernel, vendor, etc,
only mention the main ones though, probably the top four or so, otherwise this list will be a mile long xD)
The following informations are ONLY needed, when you are not opening up a devdb thread on XDA!
ROM OS Version: 9.0.x Pie
Kernel: Linux 3.18.x
Version Information:
Status: NIGHTLY
Release Date: 17-01-2019
You want to see a "normal" night at the "DEV office", click here!!​
XDA:DevDB Information
[ROM] AICP-ROM [14.0] [Pie] 9.0.0 [Stable]Unofficial 17-01-2019, ROM for the Xiaomi Redmi Note 4
Contributors
hungphan2001
Source Code: https://github.com/AICP
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: 10.1.x
Based On: AOSP
Version Information
Status: Beta
Current Stable Version: 2019-01-17
Stable Release Date: 2019-01-17
Current Beta Version: 2019-01-17
Beta Release Date: 2019-01-17
Created 2019-01-17
Last Updated 2019-01-17

Power off alarm working?

Yayyyyyyy!
Finally!

---

Deleted

[ROM][10][UNOFFICIAL][PERSEUS] AICP android Q r31 [29/MAR/2020]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
Latest Stable Release Version 15.0
Download link: https://androidfilehost.com/?fid=4349826312261756417
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery.
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work),
6. Flash the root solution of your choice (optional).
7. Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/PriNcEFuL/kernel_xiaomi_sdm845
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Discord Community
AICP Telegram channel for server notifications on official builds​
XDA:DevDB Information
AICP, ROM for the Xiaomi Mi Mix 3
Contributors
PriNcEFuL
Source Code: https://github.com/AICP
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest EU
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 15.0
Stable Release Date: 2020-03-29
Created 2020-03-28
Last Updated 2020-03-28

Reserved

Reserved

This rom is awesome, smooth and there is a lot of customizations and tweaks.
Nice work, than you for this rom.

error
PriNcEFuL said:
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
Latest Stable Release Version 15.0
Download link: https://androidfilehost.com/?fid=4349826312261756417
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery.
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work),
6. Flash the root solution of your choice (optional).
7. Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/PriNcEFuL/kernel_xiaomi_sdm845
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Discord Community
AICP Telegram channel for server notifications on official builds​
XDA:DevDB Information
AICP, ROM for the Xiaomi Mi Mix 3
Contributors
PriNcEFuL
Source Code: https://github.com/AICP
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest EU
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 15.0
Stable Release Date: 2020-03-29
Created 2020-03-28
Last Updated 2020-03-28
Click to expand...
Click to collapse
when im in TWRP (all wipes,etc) I try to install the rom zip say "ERROR"...any idea?

gastis_89 said:
when im in TWRP (all wipes,etc) I try to install the rom zip say "ERROR"...any idea?
Click to expand...
Click to collapse
No need to quote the OP. It's just clogging-up the thread!
Regarding your problem, have you noticed the following with the OP? "ROM Firmware Required: Latest EU
Which is at the time of this writing: xiaomi.eu_multi_MIMix3_20.3.26_v11-10

Does Hardware GPS working?

Kirrr said:
Does Hardware GPS working?
Click to expand...
Click to collapse
Yes Hardware GPS works
---------- Post added at 09:27 PM ---------- Previous post was at 09:25 PM ----------
gastis_89 said:
when im in TWRP (all wipes,etc) I try to install the rom zip say "ERROR"...any idea?
Click to expand...
Click to collapse
What recovery? Best is Mauronofrio 3.3.1-17

Awesome rom any plans for gesture navigation?