hello , i got really irritated about the new dailer for the one plus , i tried to install the old one by rooting the device and going through TWRP . everything worked fine for a couple of days .
afterwards i tried to call and every-time i pressed on " Contacts " the phone crashed and it enterned a loop that it just crashed again and again , i could make a single phone call!
i saw here a "Toolkit" that allow me to flash cm11s, it can solve the problem?|
i tried to wipe through the TWRP and it worked. but after about a few days , the problem came back and i wanna throw the phone to the sea already but i cant cause it costed me money.
desperate for assistance. thank you.
Related
Hello everybody !
I have a huge problem here with my NS, I hope you could help me : I installed this CM7 Final 3 days ago, and everything was fine until I decided to do Nandroid backup. The backup went fine, but when the phone has reboot, I had immediatly this error message : "Sorry, the process com.android.phone has suddenly stopped. thanks to try again". Abd this message appears every 3 seconds, anbd I can't do anything....plus I have no signal, no radio, no network. Another strange point is that we I reboot the phone, it never ask me to enter my PIN code .....
First thing I did was to restor my system from Rom Manager, but the same problem appeared. Then I tried to restore the system manually with the recovery, and same problem.
I don't what to do now ; the only solution I imagine now is to wipe everything and reinstall CM7 .....but I wish I could find another way...
Thanks for your kind help (and sorry for my english, I'm french).
Hi everyone
I've been looking for hours and hours on the internet and im really sick of it at this point, its very frustrating ):
You see, yesterday i decided to factory reset mi moto g (xt32)(4.4.2) because i was getting an error when trying to sync my google account (was getting the "no reliable connection bla" error) i looked it up and they said sometimes it fixes after a hard reset.
So i hard reseted it (i wiped something about "/fsgs" "/persist" "/somethingelse" while in cwm) but then i got a boot loop problem, looked that up and used this thread http://forum.xda-developers.com/moto-g/help/xt1032-bricked-please-help-t2980601
I didnt have any problem with the instructions of the first link but didnt do what the second link said because it gave me an error when trying to flash the br-rom in the last step, but my moto g was booting "normally" then so i didnt care
Later, i decided to flash a retail US 4.4.4 stock rom that i got from here http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
When it booted i couldnt get the wifi the work, i clicked the switch but it instantly went off, and the phone wasnt detecting my sim card anymore,
As i said i've literally spent half a day trying to solve these problems ):
Thanks
bump for mother mary's sake
im still trying to solve this ): anyone ?
I am really not sure what happened to the phone but I will tell all I did that might have connection to the current sitiuation.
I rooted the phone a while back , no issues with root.
As internal memory is low on this phone (4 gbs) I used link2SD.I have used in past with other phones never had a issue but this time the apps which were linked magically disappeared and some wont start saying " Application has stopped working " , So I decided to , oh wait I forgot I also had TWRP custom recovery on this phone too , no issues happened with it either, yet. So I decided to restore to a backup I made with TWRP a few days ago, I have previously done this thing and it worked perfectly unlike this time.I booted to recovery then restored to that backup but when I booted back the device wouldn't start! All it was showing was the boot screen(circles moving in weird pattern) I waited around 3 hours then I decided to factory reset , I took out the battery (BAM I did a mistake here I guess) went to recovery did a normal factory reset then again I was at the boot screen looking at circles This time I gave a around 10 hours but it still didnt load up , then I took out the battery again next what I see it when I try to start my phone NOTHING WILL HAPPEN only screen turns on for like few miliseconds showing only back screen (NO KARBON LOGO OR ANYTHING) and goes off again. I tried pressing Vol Up and choose recovery mode but it wont let me go in recovery it turns off again as soon I choose okay (RECOVERY DONT LOAD AT ALL NOT EVEN THE LOGO). Please explain what happened to phone and how can I fix it. :crying: :crying: :crying: :crying:
Go To Karbonn Care
I think I told you its rooted and stuff, which voids warrenty
Same thing happed to me with my sparkle v and now its not even receiving stock firmware via sp flash tool
Flash stock firmware by removing the battery
DeepSahota said:
Go To Karbonn Care
Click to expand...
Click to collapse
Hey can you please help me.I have karbon sparkle v.everything is on stock.after marshmello ota updates the phone was little bit unstable .many google apps were getting fc. Recently in decided to factory reset my device.after factory reset I can't get past the "checking connection" screen that we get after factory reset. There is no option to skip that to as usually it is available in other devices and ROMs.can u please tell me how can I fix this.can I flash stock 5.1 via stock recovery ?or maybe 6.0.1 again? I can't bypass the screen so I cannot switch on USB debuinging else everything would have been OK ?.please suggest something
Hey, 2 months ago I installed gltools on my Prestigio Multipad Ultra Quad 8.0 3G tablet. First time it was succesful, but I wanted to install latest version (without uninstalling old one) , then it bricked my tab. I was stucked in bootloop, I searched web to find solution and it looks I have to uninstall gltools via revovery using zip file. ABORTED... So I decided bring tablet to servis, I waited 3 weeks till than answered me ( I had to go there and ask myself :silly: ) . Answer was like they cant do anything.... Or when they do , it will cost as new tablet, because its hard damaged in system... So i let him lay in box. But yesterday I was bored and wnated my tablet back, so I googled more info, I found that uninstalll_gltoos zip can do only CWM or TWRP. But how it install on bricked tablet? ... As i googled more I found one tutorial in my language , how to install CWM , I played with it around maybe 20 minutes and CWM was flashed into bricked tablet. Then I just succesfuly uninstalled it, cleared data and did factroy reset, and tablet is working again :victory: ...I just asked myself what a dumbass works in this servis lmao... If 17 year old boy did it in 20 mins and he coulnt in 3weeks . So my question is : When I will again trying install gltools, and get again into bootloop, just need repeat steps in CWM as I did first time and it will work again? Or there is chance I can brick it harder and uninstalling gltools,wipe cache/fac reset will not enought to fix it? Thanks!
PS: Just want isntall gltools as first time as did, but I am afraid even if I repaired it.
@delete0000 well done ! Now that you have your custom recovery installed, if anything "goes wrong", it would made the system crash. You simply need to reboot into recovery and flash the gltools uninstaller! There's no way you can mess up the boot
dev>null said:
@delete0000 well done ! Now that you have your custom recovery installed, if anything "goes wrong", it would made the system crash. You simply need to reboot into recovery and flash the gltools uninstaller! There's no way you can mess up the boot
Click to expand...
Click to collapse
Thanks for the fast reply!
Hello guys,
within the last days my phone got really slow, so I decided to reinstall my OS (cyanogenmod 11) + some "optimization Tools".
At first everything worked fine...but at some point I probably did a mistake because atm my phone just makes an unhealthy sound and restarts, usually at the sim card unlock screen after some seconds (ODIN and CWM work fine).
I used CWM to delete everything and reinstalled Cyanogenmod(because thats the only ROM I have on my phone and I cant copy anything on it) ...but nothing happened -> same OS, same Apps, same Setting...and same problem
Then i tried out ODIN3....it took around 20 minutes to install my stock rom....but NOTHING changed, still cyanogenmod, still WA installed, still userdata...
Am I missing permissions to delete the files on my phone or what is going on ?
Any suggestions on how to fix it with cwm or ODIN ?
Thanks in advance
Hope it's ok to push after 8 hours :c