Andromadus - Test Builds
To start with here you will find test versions of ROMs built by me from the Andromadus github repo http://github.com/Andromadus, think of them along the same concept as nightly builds just not every night These are development ROM's, if you want to run bleeding edge development ROM's and at least know how to use adb and logcat then you might find something of interest here. If you require something that works 100% of the time all of the time then this might not be for you. That said you can always give it a try and if it doesn't work restore your previous nandroid backup!
What IS Andromadus?
Initially it was a group of people who got together to make ICS work on the HTC Desire Z because nobody else seemed to want to support devices with physical hardware keyboards/trackpads. Whilst the idea stays the same It has grown slightly to support some other hardware and some of the work we have done is now used in many other devices. Andromadus builds of CM10 or CM10.1 are basically CM sources with a few additional tweaks or additions to support our phones.
1. New versions will be added as and when I feel there are enough changes to warrant one, don’t ask when the next version is coming.
2. If we decide to release a "Stable" version of these roms they will be published in another Andromadus thread.
Direct all your queries with release versions to that thread and in the same vain do not discuss these releases anywhere but here.
3. I will do as best I can to answer questions but if you don't get an answer from me I'm sure somebody else will be along to help. Help each other and I have more time to spend fixing things!
4. Don't ask for what's changed since the previous version, have a look at the recent submits on the Andromadus github if you want to know or wait for the mini changelogs when I post a new release.
5. If there is something in particular to test it'll be mentioned!
6. As always if you didn't wipe between installations then at least verify that the problem exists on a clean install before posting here. Nandroid/superwipe/install/check at the end of the day you can always restore your nandroid if the problem is reproducible on a clean installation. If you can't be bothered to try this then I really can't be bothered to try to help you :>
7. All that said ensure you make a nandroid/backup before hand. I take no responsibility for what you do to your phone with these ROM.
8. Whilst I can't stop you I would rather these builds were not used as a base for any ROM/MOD/ETC. The source is all available if you want to do your own builds with which you can do whatever you like.
9. Tell us what works/what's worse/what's better but don't ***** when something breaks or isn't fixed yet, report it and move on.
10. Sometimes people forget that we do this for fun, for ourselves, and sometimes your super important issue is way down on our personal list of things to be fixed.
If you ignore any of the above you will in turn be ignored.
Now that's all out of the way as always have fun
As usual you need to flash the ROM then GAPPS.
Checkout http://andromadus.flinny.org for links/files/changelog's
This a team/community effort, I'll not list everyone who has helped along the way here that list is in the beta thread but I will say thanks to all of them again and obviously anyone that has been missed.
Reserved
Build 5 was pretty stable, interested to see what has changed.
Tapatalked from Desire S running Andromadus
Build 5 was first build i used of AOSP 4.2 and it was fantatic experience, i never expected 4.2 to work so flawlessly on desire s so fast after release. And to be honest i did not see many bugs.
So i flashed build 6 and i was not disapointed, as you said you will release only stable and advanced releases and it was the point with 4.2 build6.
It would be nice to see official changelog, but i have noticed some nice little resize job done and few small glitches fixed.
I just found one thing i dont know how to fix. On android keyboard swype Lithuanian dictionary doesnt work. It is not in official list until i refresh it and then it pops up and i install it ( it worked well with build 5) and with build 6 it just doesnt work, and when i return to dictionary list there is no Lithuanian dictionary again .
Sensors are not working properly. When i make a call, screen turns off even when i don't block the sensors and it stays that way till the time call is going
Sorry man posted it in wrong thread. Its for andromadus cm 10.1 but do look into the matter as its really is irritating
Sent from my Desire S using Tapatalk 2
Thanks for the info..
Why there is no Google Now on lock screen? Only unlock option...
I have latest gapps, updated Google Search etc.
Taranis said:
Why there is no Google Now on lock screen? Only unlock option...
I have latest gapps, updated Google Search etc.
Click to expand...
Click to collapse
That's just the way it is for 4.2, Google made it that way.
I thought I saw videos on YT with Google option on 4.2...
Taranis said:
I thought I saw videos on YT with Google option on 4.2...
Click to expand...
Click to collapse
Yeah, that is for devices with On Screen buttons (Galaxy Nexus or Nexus 4/7/10). For those, the buttons are replaced with a dotted circle on the lockscreen, swiping up from which opens Google Now. Since AOSP doesn't officially support any device without hardware buttons, Google probably thought that it would be best to remove the option from the lockscreen, since swiping from the buttons opens that anyways
Trouble with bluetooth
Hi,
Thanks for your work on this rom!
I would like to report an issue with the Bluetooth functionality in this (and earlier) versions of this rom. In my circumstance it doesn't produce an error of crash.
For example. My phone is connected with a handsfree carkit (parrot) and when entering the car it recognizes the phone, asks for pin code and 'gets connected'. The problem is that the phone is not visible (as usual) on the handsfree device and the overall functionality does not work.
If I can be of any assistance in this I'll gladly be of help.
Thanks for your work!
Well Google switched the bluetooth plugin in 4.2 from bluez to bluedroid. It has been causing issues across devices, even Nexus 7 has issues. As Flinny said we can't do much unless someone upstream fixes it.
Read more here...
http://forum.xda-developers.com/showthread.php?p=35093862
Tapatalked from Desire S running Andromadus
Anyone know why the sound disappear?. notifications, alarms, ringtones, ect.
Thanks for the enlightenment!
suku_patel_22 said:
Well Google switched the bluetooth plugin in 4.2 from bluez to bluedroid. It has been causing issues across devices, even Nexus 7 has issues. As Flinny said we can't do much unless someone upstream fixes it.
Read more here...
http://forum.xda-developers.com/showthread.php?p=35093862
Tapatalked from Desire S running Andromadus
Click to expand...
Click to collapse
Flinny, almost everything works great.
Issues I found (AOSP build 6):
- laggy Camera animations (not very important, maybe it cannot be better),
- high Android OS battery usage (battery really lasts less),
- dictionaries other than English doesn't work with swype keyboard feature,
- some people wrote about bluetooth audio issues.
ROM is very smooth, hope it will be smooth in next builds. Great work!
Taranis said:
Flinny, almost everything works great.
Issues I found (AOSP build 6):
- laggy Camera animations (not very important, maybe it cannot be better),
- high Android OS battery usage (battery really lasts less),
- dictionaries other than English doesn't work with swype keyboard feature,
- some people wrote about bluetooth audio issues.
ROM is very smooth, hope it will be smooth in next builds. Great work!
Click to expand...
Click to collapse
camera animations do lag sometimes and some pictures you take tend to not show up in gallery after you have taken them.
As for battery all i can say is :highfive: battery is almost same in all 4.0/4.1/ 4.2 roms AND it is not at all bad here. I managed to get from full charge(100%) to 81% in 30 hours. I doubt many roms can do something like this in low-med usage.
Other then that this rom is my personal favorite until someone release 4.2 rom with better theme or perfomance.
The only thing i lack in here is conservative cpu governor and maybe little undervoltage.
Taranis said:
Flinny, almost everything works great.
Issues I found (AOSP build 6):
- laggy Camera animations (not very important, maybe it cannot be better),
- high Android OS battery usage (battery really lasts less),
Click to expand...
Click to collapse
+1
Who can tell me how can I put GPS shortcut on quick setting ??I have everything I need except GPS shortcut...
Anyone else have an issue where Calendar just wont sync at all to any Google account? I don't have the options to sync calendars under any of the google accounts I've set up on the device. Tried reflashing, clearing app data etc.
Apart from that, great rom. Super nice battery life.
noponies said:
Anyone else have an issue where Calendar just wont sync at all to any Google account? I don't have the options to sync calendars under any of the google accounts I've set up on the device. Tried reflashing, clearing app data etc.
Apart from that, great rom. Super nice battery life.
Click to expand...
Click to collapse
Clean or dirty install?
By dirty install remove Google accound(s) and then add your accound(s) again.
Worked for me!
For JB4.2 based roms (CM10.1 and AOSP4.2)
if you use a BT headset and are having problems with the mic give this a try.
download the following file.
http://andromadus.flinny.org/libbt-vendor.zip
extract it
Push it to your phone with adb - from the command line
adb remount
adb push libbt-vendor.so /system/vendor/lib
adb reboot
try it now.
Give it a try again and tell me if it all works... If all goes to plan new builds soon
Nick.
So, I'm obviously not remotely an expert when it comes to Android mods, but I'm finally fed up with being stuck on Android 4.1 - since it doesn't appear we'll ever get any upgraded qwerty phones ever again, I figured I'd try diy'ing it.
I have successfully flashed TWRP, rooted the phone, and installed what I believe(?) to have been the most recent version of CM11 (I figured it'd be cleanest to keep the phone closer to what it was designed for - I've seen tons of apps require 4.4 at minimum, not too many that require 5+): cm-11-20150626-SNAPSHOT-XNG3CAO1L8-moto_msm8960_jbbl.zip. Was the most recent version I could find, anyway?
I booted it up and for the most part, everything seemed to be working. Everything except Chrome, which crashes reliably and immediately. I tried clearing all the caches (the app's cache + data, and the phone's, from recovery), uninstalling and reinstalling Chrome, I tried the beta version (crashes), I tried a fork, Brave (crashes). Other browsers are working fine, but I like Chrome.
One weird thing I did notice: I was thinking it might be a gapps issue, but weirdly, the Play store, gmail, maps, everything else just installed and seem to work out of the box before I did anything with gapps? I did also try flashing the most recent base 4.4.4 gapps zip from what I could tell (gapps-444-base-20170209-1-signed.zip), but I'm not sure how to tell if it actually did anything? It said it flashed successfully, but (other than having to wait for all my apps to recalculate because I cleared all the caches), nothing noticeably seemed to change on the front-end as a result, and yes, Chrome still crashes. Should I be using a different gapps install than that for the Photon Q? Or anything else I should check/try? Thanks!
Yay! Answered my own question, with sufficient digging!
Answer seems to be basically: the newest version of Chrome (v55) exposed some sort of weird incompatibility with CM, so the easy fix is just not to use it, at least for now. I sideloaded Chrome v54, and it stopped crashing, yay! Source: https://forum.xda-developers.com/showpost.php?p=70762641&postcount=198
Just FYI, the latest version available for this device is CM13.
They are working on Lineage.
Edit - seems you found the CM13 thread already
Yep - I'm glad to see people other than (and smarter than) myself recognize the Photon Q's unique place as being the final and, sadly, best qwerty slider available for our use, and that it therefore needs to be actively maintained even if Motorola won't... I just figured it'd be better to use an OS closer to the one the device was intended to be used with. Once I'm done testing CM11 out on my old half-working phone (re-purposed to a test phone) and push it to my new fully-functional one, I will probably at some point upgrade that first phone to the latest to try it out (probably once a Lineage build comes out, so I can be on a build that's actively being maintained). For right now, though, I figured I'd stick with CM11. Any case, looks like CM13 exposed the same Chrome issue, anyway.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub... and at CarbonROM Gerrit.
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash!
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
We recommend MindTheGApps. OpenGApps should work, but please make sure you clearly mention the gapps you're using when reporting bugs.
Get CarbonROM
Changelog
Join the CarbonROM Discord server
GitHub
Gerrit
Kernel source
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
CarbonROM, ROM for the Sony Xperia Z3 Compact
Contributors
Myself5, CarbonROM
Source Code: https://github.com/CarbonROM
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: AOSP
Version Information
Status: Stable
Created 2018-04-01
Last Updated 2018-07-19
Wow thats good. Thank you very much.
Hi, Myself5! Thanks a lot that you still support our device though you have newer devices.
User experiences and issue list for 2019-03-11 Release
First of all, thanks to @Myself5, @rcstar6696 and all other members of the CarbonROM team for the release of CarbonROM 6.1 Oreo for our device! :good::victory:
User experiences with CarbonROM 6.1:
Installation was smooth. I flashed cr-6.1 and OpenGapps ARM 8.1 on top of my working cr-5.1 installation (dirty flash), so all of my apps and their settings were kept. MindTheGapps 8.1.0 arm, which are recommended by the Carbon devs, are also working fine. Keep in mind that there is no guarantee that a dirty flash works in all cases, so you might have to wipe your data partition. This generally is recommended when updating to a new Android version anyway.
Besides of some small issues (see below), everything runs stable and the system is snappy and smooth. Thermal management and charging speed is fine.
Magisk 16.0 works fine, as well as Xposed Framework (SDK 27) v90-beta3 or alternatively Systemless Xposed (SDK 27) v90.1-beta3 Magisk module. However, there are some force-closes of background apps every now and then, caused by the beta status of Xposed v90.
My Xperia Torch Boost Magisk module is still working well on cr-6.1.
Selinux is set to enforcing, just as it was in cr-5.1.
I found out that Android Messages SMS/MMS app has a high battery drain, which e.g. is also reported for Pixel devices on Android 8 Oreo, so a general bug by Google. Because of this, I switched to Textra SMS (of course you can also use one of the other SMS/MMS apps around), which fixes the battery drain.
Improvements in comparison to cr-5.1:
The camera button now acts exactly like in Sony Stock ROMs, so now focussing and taking pictures is possible with Stock Sony Camera. You can also invoke the Stock Sony Camera by long-pressing the camera button, just like in Stock ROMs, but this doesn't work when the device is off or locked. In this case you can use a double press on the power button, which can be enabled in Carbon Fibers settings.
Booting the device is noticably faster than on cr-5.1.
Lower battery drain than on cr-5.1.
Better, more uniform design.
The ROM is being updated to the latest Android Security Patches.
Apps can be "locked" in the Recent Apps, so when pressing the Clean All button, they keep running.
4K video recordings are possible.
Missing features in comparison to cr-5.1:
There is no option to turn on Network Traffic Indicators yet. (This has been added in 2018-04-05 Weekly.)
Default Camera-App does not allow to save photos to sd-card, puts photos in wrong orientation and is all around very limited. However, there are good alternatives like Open Camera and the Stock Sony Camera. (Since 2018-05-01 Weekly, Snap Camera is used again.)
Issues in Carbon ROM 6.1:
Video recording doesn't work yet with the built-in Camera app, as well as with several other apps like Open Camera and the Stock Sony Camera. Until this is fixed, you can use Footej Camera for video recording as a workaround. (This has been fixed in 2018-05-08 Weekly by @AdrianDC and Milos Ratkovic.)
DoubleTap2Wake isn't working yet. (This has been fixed in 2018-04-11 Weekly.)
The SystemUI (Quick Settings etc.) always is shown in white theme. I know that this is Oreo's default design, but it should change to dark theme when using a dark wallpaper. (See @Myself5's reply in post #14.)
The gyroscope doesn't work properly yet with certain apps, e.g. Vr Tester - Gyroscope Sensor App and Accelerometer Gyro Tester. (Obviously this is a bug of those apps or of Oreo in general, since @Myself5 could reproduce it on his Pixel 2 XL device, running on stock ROM. Many other apps that use the gyroscope are working fine on cr-6.1.)
Saving and accessing files on SD card doesn't work for certain apps and tools, which could be a Linux permission or SELinux denial issue. For further information and partial workarounds, see post #45, post #49 and post #51. (This has been fixed in 2018-06-05 Weekly.)
Screen Cast still isn't working for me with 2018-04-11 Weekly (I tested this with a Sony and an LG Smart TV which both connected fine to my Z3c on stock ROMs), even with the new boot image from post #103 which is working with @Myself5's Fire TV stick and Wireless Display Adapter. This has been fixed in 2018-04-17 Weekly.
WiFi isn't working on 5 GHz band in some countries, as has been reported in post #1634 on the Z2 cr-6.1 thread, including links to posts with possible workarounds and fixes. There's also an article in the xda wiki with further information. Since 2018-05-01 Weekly, Germany (DE) is used as Wifi country code, but there have been several reports by users from other countries that this doesn't work for them, so is not an universal fix. As a workaround, until this is fixed, you can use my Magisk module from post #195, which you have to change to your own country code by following the instructions that I gave there. Edit: @marcogiannetta posted an improved Magisk module in post #373 which changes the Wifi Country Code accordingly to the system language. A similar issue (wifi dosent connect in Iran) also has been reported on the bug tracker and is being looked after by the devs. Edit: According to post #2092 on the Z2 thread, this issue can also be fixed by installing WiFi regional problem solver Xposed module.
Music files can't be played from SD card with Vanilla Music, Sony Music and several other players. This issue was fixed in 2018-05-08 Nightly, but reappeared on 2018-05-15 Nightly. Until this is fixed again, you can use jetAudio HD Music Player as a workaround. (This has quickly been fixed again in the 20180515-2340 Weekly build.)
When making a screenshot via the Power menu, most of the time the Power menu itself is visible in the screenshot. There should be a slight delay (just 1/10th second might already be sufficient), so the Power menu is already hidden again before the screenshot is taken. This has been fixed in 2018-07-05 Weekly.
Apps like Netflix, MyCanal and MagineTV don't work because DRM WideVine is not supported yet, whereas in CarbonROM 5.1 it was supported. This has been fixed in 2018-08-15 Release.
Lock screen rotation has been removed since 2018-09-11 Release. It was a useful feature when using the phone in landscape orientation e.g. in a car holder and IMO should be added again. Edit1: As a workaround, I made LockscreenRotationEnabler Magisk module which adds this functionality by adding a setting to 'build.prop'. Edit2: Lock screen rotation can also be enabled with GravityBox [O] Xposed module.
NFC extended length isn't supported, which is needed e.g. for reading identity cards with apps like AusweisApp2. (This has been fixed in 2019-03-11 Release.)
NFC-HCE isn't supported, which is needed for Google Pay. (This has been fixed in 2019-03-11 Release.)
Wish list for some further improvement of Carbon ROM 6.1:
Long press camera button to wake and launch camera app when the screen is off or the phone is locked. Edit: I found a workaround which I described in this post.
A toggle to switch to dark UI theme for quick settings. Edit1: The dark UI theme can be forced with ForceDarkModeOreo Xposed module. Edit2: ForceDarkModeOreo unfortunately is one of the Xposed module which cause random app crashes, so it's not advisable to use it. Let's hope that the devs will add this feature eventually.
About time this one got its own thread, huh
Everything works great, no bugs so far and no problem with camera recording (using Footej Camera), though missing hardware key rebindings and i cant enable power notifications
Downloading right now. Lets see how it compares to Omni 8.1
EDIT (my comment from a few pages later):
After a few days with it, I can say it's already suitable for daily use. Using MindTheGapps (tho I will switch to OpenGapps pico, I don't want Google app ), Magisk 16.
It's smooth and very stable. No crashes or major issues for me so far.
Battery life is acceptable, worse than stock (doh), and perhaps even LOS 14.1. Thermal management and charging speed is fine.
No idea about the camera, mine is broken (HW) and I never use front one.
A few suggestions and comments:
Add some power balancing options like with LOS (better performance or battery life).
Also, I love how you can customize RGB values on LOS to make it more yellowish even during day, plus night light. Any idea what workaround I could use? My blueish screen is killing me and I can't use night light all day.
Good to hear night mode is being worked on.
How to make quick tiles menu like on 7.x? I preferred auto expanding options for mobile data and silent mode. Can't find it in fibers.
Hi, Great that development is ongoing - Thanks a lot!
One thing, got the same problem with the none carbon Oreo Version:
got problems with whatsapp. Video isn't running. The phone doesn't build up a connection. Chat works, but whatssap call or video not.
Skype ist working without problems ...
Any Ideas?
I installed it with a full wipe - system, cache, dalvik, data, internal storage. Used TWRP 3.2 for ROM (to mind error 7) and TWRP 3.1 for installation of MindTheGApps.
Thanks for help!
Thanks for the ROM, working great for me.
I have accidently deleted live wallpaper picker. Tried download a few different versions from the internet but nothing works. Where can I get the one this ROM is using?
FYI: I now posted my first impression and experiences in post #4. I'm planning to update it when new Weeklies arrive or when other users report some issues that are worth listing.
@Myself5: Please have an eye on the missing features and issues that I postet there, so they will hopefully get fixed in the next Weeklies.
Happy Easter to all of you!
Nice post, okij
okij said:
[*]The SystemUI (Quick Settings etc.) always is shown in white theme. I know that this is Oreo's default design, but it should change to dark theme when using a dark wallpaper. Also, forcing dark theme via Dark Tricks Xposed module doesn't work.
Click to expand...
Click to collapse
It'd definitely be nice to have the dark theme overall. I'm not sure if I'm the only one, but I really dislike the white Oreo style. Is it possible to have it look more like Nougat, also in the 'settings' app? I, for one, always loved the color scheme that Goolge made from Lollipop to Nougat.
Kocane said:
Nice post, okij
It'd definitely be nice to have the dark theme overall. I'm not sure if I'm the only one, but I really dislike the white Oreo style. Is it possible to have it look more like Nougat, also in the 'settings' app? I, for one, always loved the color scheme that Goolge made from Lollipop to Nougat.
Click to expand...
Click to collapse
Doesn't substratum work?
Metall Boy said:
Doesn't substratum work?
Click to expand...
Click to collapse
Substratum works fine
Greets ted!
okij said:
FYI: I now posted my first impression and experiences in post #4. I'm planning to update it when new Weeklies arrive or when other users report some issues that are worth listing.
@Myself5: Please have an eye on the missing features and issues that I postet there, so they will hopefully get fixed in the next Weeklies.
Happy Easter to all of you!
Click to expand...
Click to collapse
For things like Networks indicator: Some additional features will surely come with time, as you said.
Video recording: I think it was the Z3 thread where I explained it in detail: The commits to fix Video recording do work (kind of), but are WIP, so we're all working on getting them stable and polished, then they will be merged as fast as possible. When that happens is rough to estimate, I wouldnt expect it to take much longer than 2-3 Weeks though.
DT2W: As you said. Fixed and merged, will be included in the Next Weekly.
For the Dark Theme: Isn't that a Pixel only feature? For that to work you'd need assets for a "dark theme". On Pixel devices those are on the /vendor partition, so obviously not present on our Z3C. Correct me if I'm wrong please.
Thanks for the detailed report, will gladly keep on checking it with followup builds.
Metall Boy said:
Doesn't substratum work?
Click to expand...
Click to collapse
It does. Install the Substratum app and flip the switch in CarbonFibers -> Privacy to make it work.
The Switch is disabling the Security measures Google merged in the March ASBs. By default Subs completely removes them, but we decided to go for an opt-in for those that want to use it while keeping the "security" Google intended to have with merging it for those that don't want to.
First off all, thank u for this amazing work! Rom is awesome.
1 - I saw that DT2W is fixed in the next build. It's possible add a feature present in gravitybox? When smartphone is in the pocket, sometimes screen turns on because DT2W. Gravitybox has an option to disable this when proximity sensor is covered.
2 - Someone can tell me if led notification works? Not work here...
Sorry bad English...
Sorry for asking again - anyone using this rom with working whatsapp video oder whatsapp call? When I try it the connection always hang up - no connection. Chat works.
Any idea anyone?
Thanks!
marlontravagli said:
1 - I saw that DT2W is fixed in the next build. It's possible add a feature present in gravitybox? When smartphone is in the pocket, sometimes screen turns on because DT2W. Gravitybox has an option to disable this when proximity sensor is covered.
Click to expand...
Click to collapse
Yes, this is a great additional feature when using DT2W and one of the reasons that I use GravityBox. @Myself5: It would be great if you could implement this feature for those of us who don't use Xposed. In GravityBox it can be found under "Power tweaks -> Proximity wake up" and the additional option "Ignore for incoming call" which is also worth implementing.
2 - Someone can tell me if led notification works? Not work here...
Click to expand...
Click to collapse
I can confirm that LED notifications are working here, just tested this with missed call (using Google Dialer) and incoming email (using AquaMail).
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Laus_bub said:
Sorry for asking again - anyone using this rom with working whatsapp video oder whatsapp call? When I try it the connection always hang up - no connection. Chat works.
Click to expand...
Click to collapse
I don't use WhatsApp, but I guess that the not working video call has to do with the not fully working video recording (see #1 in the issues list I posted here).
Hello All,
I just updated from CR5.1 to 6.1 this day, and tried to install Magisk.
But Magisk Manager failed to update, and if I flashd through TWRP (the good one, 3.1) I'm stucked in Sony logo.
Log said :
"Parsing boot image : [/data/user_de/0/com.topjohnwu.magisk/install/boot.img]
No boot image magic found!
! Unable to unpack boot image
Failed!
! Installation failed"
I have to "install" Magisk uninstaller in TWRP to bring life to my phone
EDIT : magisk 16.0, manager 5.6.4.
Some idea pls ?
ElLoloFR said:
Hello All,
I just updated from CR5.1 to 6.1 this day, and tried to install Magisk.
But Magisk Manager failed to update, and if I flashd through TWRP (the good one, 3.1) I'm stucked in Sony logo.
Log said :
"Parsing boot image : [/data/user_de/0/com.topjohnwu.magisk/install/boot.img]
No boot image magic found!
! Unable to unpack boot image
Failed!
! Installation failed"
I have to "install" Magisk uninstaller in TWRP to bring life to my phone
EDIT : magisk 16.0, manager 5.6.4.
Some idea pls ?
Click to expand...
Click to collapse
Did you try removing all other modules? For me the very same thing is happening if I try to use the fbind (Folder Bind) module. You can try to remove all modules, if u use the Magisk Manager for Recovery Mode (mm).
I tried and :
"No magisk installation found."
So I installed Magisk v16, then installed this one.
I could install mm, this was the only module installed.
I uninstalled mm, rebooted without uninstalling Magisk V16, and the phone booted !
But I can't open Magisk Manager v5.6.4, stucked in the app logo...So Magisk seems to be installed, but I can't use it :/
EDIT : Well, after a recovery reboot, reinstall f magisk V16, phone boot correctly and Magisk is alive.
I don't know how this is working, but it's working.
No doubt, you helped me, many thanks