I love the textured power button on my new phone and would love a case that had the same. Anybody run into one?
I am not a fan of the cases without buttons as the buttons then feel to deep to hit easily. Anybody got a case slim enough that you can hit the buttons easily?
I cut out my Moko case to expose the textured power button.
Related
Hey guys,
so i had a chance to review this case. I am a big fan of incipio and specially the feather for other devices..but this one fails in every simple aspect...wrong measurements? who knows.however the protection given is awful.. I rather choose the body glove or skullcandy
Here is the video for u
http://youtu.be/DK1d7VQfTjs
I got to say this review is exactly my experience and opinion of the incipio feather case for the One S. I had my One S in it for 1 week when the thin bar of the case above the volume rocker button cracked in half without reason. After it cracked, I noticed the case did not fit the phone as well as I thought it did and there was actually a little flex room when pressure was applied to various area of the case. The thin plastic bar above the volume rocker is the weakest part of the case when it flexs so I think that is why it cracked in half right there. Maybe I just got a defective one. Only thing I might add to this review is that the case does not have a notch cutout for the power button and it can be hard to turn the phone off/on at times. Hopefully incipio revises this case because it really looks nice on this phone.
I just got my verus iron shield and love the case but the volume buttons are very stiff and volume up almost doesn't work. Is there some kind of way I can mod the case?
Sent from my Note 4
I noticed that right away with mine but... some cases are annoying with the ease of button presses. I have the Verus Thor and the power button requires intent to activate; no accidental engaging. The volume buttons are easier to press and sometimes actually do engage without intent when handling the phone in landscape mode. I think it is a feature. I wouldn't mind if my volume buttons were harder to press. Not sure if it gets easier going forward with use but I hope mine doesn't get easier. It's not often that I adjust the volume. It's more of a set and forget unless I accidentally bump it. The buttons are easy to see and feel; IMO, increases the value of this case.
So far the Thor is my best case; just wish the case had more grip when my hands are dry and the phone is cold. This time of year, both are impacting grip but it improves holding the phone. The hardness at the bottom where I tend to rest the phone's weight becomes uncomfortable and I frequently shift the phone so it doesn't get uncomfortable. I get compliments on the case's appearance. It's a keeper for sure but when I find a softer case, I'll use this one primarily for away from home for its appearance and added protection. I prefer a soft slipper for home. I've got the Samsung case+ on back order, I think that's what it's called.
donkon said:
I just got my verus iron shield and love the case but the volume buttons are very stiff and volume up almost doesn't work. Is there some kind of way I can mod the case?
Sent from my Note 4
Click to expand...
Click to collapse
Yeah the buttons are pretty hard to push... if you take the metal bumper off you'll see the reason they're so hard to push is that there is no cut out for the power switch/volume rocker in the TPU part of the case. So the pushing has to go through the TPU to get to the actual buttons on the phone (whereas the Neo Hybrid has the cut outs and are much easier to push). I guess you could make cut outs in the TPU if you had the skills/tools.
I am looking for a comfortable to hold case like it should be feeling really good in the hands
and it should have clicky soft not too hard to press Power & Volume Rocker buttons they should have that clicky feel when you push them -No cutouts i want the power & volume buttons to be covered in rubber like material for soft pressing-
and (should not be to hard to press, Power&Vol buttons should be Rubbery covered because if they are rubbery they softer and more comfy to press)
i hope i didnt type too much Wrong LOL but yeah fellas ladies I am sure there are some of you who got super comfy Cases maybe !? suggestions thanks .
leondestiny said:
I am looking for a comfortable to hold case like it should be feeling really good in the hands
and it should have clicky soft not too hard to press Power & Volume Rocker buttons they should have that clicky feel when you push them -No cutouts i want the power & volume buttons to be covered in rubber like material for soft pressing-
and (should not be to hard to press, Power&Vol buttons should be Rubbery covered because if they are rubbery they softer and more comfy to press)
i hope i didnt type too much Wrong LOL but yeah fellas ladies I am sure there are some of you who got super comfy Cases maybe !? suggestions thanks .
Click to expand...
Click to collapse
I'm very happy with my incipio dualpro. Made of rubber and soft feel plastic.
stevennekens said:
I'm very happy with my incipio dualpro. Made of rubber and soft feel plastic.
Click to expand...
Click to collapse
that is in my wish list mate ! DualPro incipio but not the Shine version cause the normal DualPro looks comfier , which do you got !? it is comfy right ?
I read on amazon people saying that it is slippery .. so is it slippery :/ ?
Got this case from a local online seller (PH) but I also found the link at Amazon. I basically got this case for its looks.
Where can I buy that case?
- Here's the link : http://www.amazon.com/CellJoy-Samsung-Protection-Kickstand-Shock-proof/dp/B00QXIMLVY/ref=sr_1_1?ie=UTF8&qid=1421044113&sr=8-1&keywords=future+case+note+4
Does it scratch the chamfered edges?
- It will not scratch the chamfered edges. This is a two-piece case, the soft inner rubber and the back hard cover. The inner rubber is too soft and feels kinda cheap for me and it is a lot softer than a generic TPU case. The back cover looks nice and its not a fingerprint magnet.
Does it offer drop protection?
- I cannot answer this one as I haven't dropped my phone on this case. But I think it will offer a drop protection just like a normal TPU case, if not slightly better.
Will it fit to a Verizon model?
- Yes, the cutout for the mic on the left side is bigger than the other one.
How are the cutouts?
- The cutouts are aligned perfectly but its also pretty small.
If you have any questions, feel free to ask me.
amazon description shows it coming with a belt clip holster. HAve you used that? I'm still figuring out where to carry my Note4
Yep. It does come with a belt clip holster, however you can only put your phone in it while the screen is facing the inside of the holster.
OK I do have another question...
How is the feel of the button press? Like when you use the on/off button or the volume buttons. I have an Otterbox comuter and I found the button presses felt like they had too much resistance. I'm using a Samsung case now and find the button press feel to be almost like when the phone is naked.
Where did you buy this in PH?
jd14771 said:
Do you find that taking the phone in and out of your packet is troublesome due to the exposed TPU on the sides of the phone? My note 3 did this with a similar case.
Click to expand...
Click to collapse
Yep, its annoying to put it in and out of my pocket so I just put it in my bag.
cjparker said:
OK I do have another question...
How is the feel of the button press? Like when you use the on/off button or the volume buttons. I have an Otterbox comuter and I found the button presses felt like they had too much resistance. I'm using a Samsung case now and find the button press feel to be almost like when the phone is naked.
Click to expand...
Click to collapse
Pressing the buttons on this case is super easy, its also just like pressing it without a case.
cdon2109 said:
Where did you buy this in PH?
Click to expand...
Click to collapse
Check their page at fb: Optimus Official
Hi I purchased a poetic case for the k1 tablet and have found I can't get the power button to worknwith the case on. Has anyone else had this problem? I love the case but its pretty pointless if I have to take it off to press the power button.
Regards
Jellijaws
Normally in the front closing flap there must be a magnet in place that activates the tablet by opening the case and switches it off by closing the flap.
When there is no magnet in the flap you have to press the power button each time you want to switch on or off.
I'm guessing you are talking about the hard case? I liked having that style of case for protection but the buttons were awful. I was able to use it but the buttons required some pressure and didn't give you much feedback through the case. I'm using their silicone case which is pretty easy to use the buttons on. Not many case options for the ST/K1 if you don't want a cheap one with a flap.