Database Info

[ROM][CM-11 KK-4.4.4][UNOFFICIAL][PORT]CM11 For LAVA-iris458Q / XOLO-Q600 / CROSS-A88

This is a real port of CM11 compiled from source by @chrmhoffmann for Wiko Stairway. This is based on KK 3.4.110 kernel compiled from source by @andreya108. This ROM is tested on LAVA Iris458Q and XOLO Q600 and it should work fine on Cross A88, Alpha Rage, BLU Dash 4.5. Try at your own risk.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
THIS ROM CAN BE USED AS DAILY DRIVER !!!!!!!
What works:
- SIM1 for phone calls (incoming/outgoing) and SMS, data (2g, 3g)
- SIM2 is a WIP
- Audio (microphone - now also outside phone calls, loudspeaker, headphones, OK google)
- Sensors
- Wifi (not wifi direct)
- GPS (no A-GPS yet nor EPO assist files, so the fix can take a bit)
- hw composer
- camera for taking pictures (not video)
- wifi and usb tethering
- battery usage stats (expect the usage for Display to be very unprecise)
- bluetooth
- candy crush, facebook and twitter
What doesn't work:
- 2nd sim card 3G switch
- Dual SIM is a WIP, not has some bugs (data connection instability, etc.)
- camera for "movies" does not work
- (hw) video en/decoding not enabled
- FM radio not available
- rest of MTK specifics
**NOTE**: Use only TWRP recovery provided below to flash this ROM for now. Other recoveries are having trouble with SELinux permissions so the CyanogenOS acts buggy!!!
TWRP: GoogleDrive
DOWNLOAD LINK: Google Drive
GAPPS: Google Drive
INSTRUCTIONS:
Place the zip file in sdcard.
Reboot to recovery (TWRP recommended).
Wipe data/factory reset.
Wipe dalvik Cache.
Install CM11_xxxx_Iris458q .
Install GAPPS.
Reboot.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please press thanks on chrmhoffmann's thread, he really did an awesome job!
Original rom link: Link
SOURCES:
Device:GitHub
Android(CM11):GitHub
Kernel:GitHub
Credits:
@andreya108 for his KK kernel
@chrmhoffmann For bringing the first ever CM10.2 for an MT6589 device.
@CHD Development Group for all their support and testing.
@OmniROM project
@Xplodwild
@Dr-Shadow

Thanx i used it on my cross a88
http://catatandroid.blogspot.com

I can't seem to find Theme Engine in here. Seems more like AOSP project than CM without it.
(jk, it still has a lot of CM specifics but not TE unfortunately.)

Please update the rom

Versi nougat pliss sir ?

Adarsh Dubey said:
Please update the rom
Click to expand...
Click to collapse
lutphi said:
Versi nougat pliss sir ?
Click to expand...
Click to collapse
MT6589 developments were stopped at KK version itself due to incomplete Android & kernel sources. No MT6589 device got lollipop. And my device also died due to swollen battery.

Hhe thanks sir

[ROM][6.0.1][STABLE] CyanogenMod 13 for Samsung Galaxy V Plus SM-G318HZ

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod Android Distribution​
Code:
#include <std_disclaimer.h>
/*
*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! You are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* For who wants to put to any other mobile phoneet mobile phone, please put the credit on the above. please help.
*
*/
CyanogenMod 13 for Samsung Galaxy V Plus SM-G138HZ​
CyanogenMod is a discontinued open-source​ operating system for mobile devices, based on the Android mobile platform.
It was developed as free and open-source software based on the official releases of Android by Google, with added original and third-party code, and based on a rolling release development model.
Although only a subset of total CyanogenMod users elected to report their use of the firmware, on 23 March 2015, some reports indicated that over 50 million people ran CyanogenMod on their phones.
It was also frequently used as a starting point by developers of other ROMs.
INSTALLATION PROCESS​
- Recommendations Using TWRP 3.1.1-0 and Up
- Download ROM
- Reboot phone to custom Recovery
- Wipe Data
- Wipe Internal (if necessary)
- Wipe Cache
- Wipe System
- Install ROM
- Reboot
- Done.
DOWNLOAD LINKS​Changelog
Important!. Before downloading this ROM please read the changelog first, and the bug below (scroll down).
2016-08-05: First build
2018-09-05: Porting ROM
dd-mm-yyyy: Bug Fixed
Android File Host
cm-13.0-UNOFFICIAL-PORT-vivalto3mve.zip
Yandex Disk
cm-13.0-UNOFFICIAL-PORT-vivalto3mve (1).zip
Additional
Additional if you want to add features to the ROM.
GApps
Open GApps (choose ARM > 6.0)
Working Packages: Pico.
Root Access
addonsu-13.0-arm-signed.zip
Optional, if you like to add a root access.
Root Access Remover
addonsu-remove-13.0-arm-signed.zip
Optional, if you want to delete a root access.
BusyBox Flashable (Latest Version, for now)
Busybox-1.29.2-YDS-ARM.zip
Optional, if you like to add busybox.
BusyBox Cleaner
Busybox-CLEANER.zip
Optional, if you want to delete busybox.
WHAT'S WORKING?​
- RIL (Calls, SMS, Data)
- Dual SIM
- Wifi
- Bluetooth
- Camera, video codecs
- Adoptable storage
- Offline charging
- zRAM (compressed-RAM swap)
- GAPPS
- Tethering (USB, Wifi, Bluetooth)
- GPS
- Torch (flashlight)
- WiFi-Direct
- SELinux enforcing
- LZ4 compressor/de-compressor for zRAM
NOT WORKING​
- OTG Not detected
- Front Camera Not detected
- FM radio Badly functioning libraries
- When listening to headphones The sound is heard too loudly
- Bootloop when installing custom fonts in the theme
- Sometimes falls off the network when using 3G.
CREDITS​
* All Indonesian Developer Sgv Plus
* All vivalto3mveml3g user
* Lineage OS team
* All XDA Team
* All 4pda Team
* Please forgive me if I forgot someone.
XDA:DevDB Information
SM-G318HZ #3: CyanogenMod 13, ROM for Samsung Galaxy V Plus SM-G318HZ (see above for details)
Contributors
hadaddarajat, CarlosGallego98
Source Code: https://galaxyace4neo.wordpress.com/2017/05/22/cm13/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock ROM 4.4.4
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2018-09-05
Created 2019-07-25
Last Updated 2019-07-25

[ROM][UNOFFICIAL] LineageOS-Modded 18.1 [LIBER]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 11 (R), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Flashing Instructions:-
1a. fastboot -w
1b. Flash latest official TWRP.
2. Flash copy-partition zip
3. Reboot to recovery.
4. Flash the build and done!
Bugs :
YOU TELL ME
* Drop a comment down below if you need any help, you can also Join https://t.me/OneFusionPlus on telegram if you need any help.
Changelog:-
Gapps are included
Included Face Unlock.
Various Extras from ProtonAOSP.
Pixel APNs.
[size=+2]Downloads:[/size]
Builds || UNAVAILABLE FOR NOW
XDA:DevDB Information
LineageOS-Modded 18.1, ROM for the Moto One Fusion +
Contributors
Hasaber8
Source Code: sm6150-motorola
ROM OS Version: Android 11
ROM Kernel: Linux 4.14
ROM Firmware Required: Android 10 (Q) Stock Firmware
Version Information
Status: Initial Build
XDA:DevDB Information
Lineage-18.1 For LIBER, ROM for the Motorola One Fusion+
Contributors
RohanHasabe8, erfanoabdi
ROM OS Version: Android 11
Created 2021-04-17
Donations :
You don't have to but if you want.
Paypal: https://paypal.me/KakatkarAkshay
UPI-ID:- [email protected]

the icons in the homescreen is highlighted when fingerprint is used. it is still there

It's been a week, I have been using this ROM on my One Fusion+(not rooted)
I have observed the following bugs
1. WiFi is getting disconnected and I have to restart my mobile for getting connected to it.
2. Icons are being highlighted when I unlock the phone using fingerprint.
3. Volume bar appears randomly on the screen, sometimes while using apps.
4. Songs are not audible while using the default Music app or any other app from the play store.
5. I have to click twice on the icons in the notification panel to activate them.
6. PhonePe is not working as it flashes a warning saying "Payments can't be done using a rooted device". Other payments are working fine.
7. When I was talking on my phone, the other person says my volume is low.
8. Videos in Prime are not being played in HD.
9. Touch area near the right bottom is not working sometimes.
I have observed these bugs. Please look into them.

N
Srikanta 18 said:
It's been a week, I have been using this ROM on my One Fusion+(not rooted)
I have observed the following bugs
1. WiFi is getting disconnected and I have to restart my mobile for getting connected to it.
2. Icons are being highlighted when I unlock the phone using fingerprint.
3. Volume bar appears randomly on the screen, sometimes while using apps.
4. Songs are not audible while using the default Music app or any other app from the play store.
5. I have to click twice on the icons in the notification panel to activate them.
6. PhonePe is not working as it flashes a warning saying "Payments can't be done using a rooted device". Other payments are working fine.
7. When I was talking on my phone, the other person says my volume is low.
8. Videos in Prime are not being played in HD.
9. Touch area near the right bottom is not working sometimes.
I have observed these bugs. Please look into them.
Click to expand...
Click to collapse
Next release shall address everything expect 8th point, as Moto devices lose L1 on unlocking the bootloader

ganeshkrishna98 said:
the icons in the homescreen is highlighted when fingerprint is used. it is still there
Click to expand...
Click to collapse
Sorry for that, next release will have it fixed!

@RohanHasabe8 So get this or
[ROM][UNOFFICIAL] LineageOS 18.1 [LIBER]
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in...
forum.xda-developers.com
Any progress?

[A11][R][ARM64][A40]LineageOS 18.1 Unofficial by Kevios12

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 for Samsung Galaxy A40
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- HW Backed video Playback
- RIL (Mobile data,calls, sms and stuff)
- Sensors
- Buttons
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- Camera
- GPS
- Fingerprint Sensor
- Mobicore
- SW codecs
- HWC
- AOD
- Stuff I didn't test yet
Not Working
- voLTE,voWiFi
Take a note that a lot of LineageOS features have not been completed yet this is not a device bug and please do not report those
in this rom thread as you will be reported to moderator also do not post bug reports for known issues or bug reports without proper
a) Logcat
b) proc/last_kmsg (or proc/kmsg)
c) dmesg
Also do not under any circumstances post bug reports if you are using substratum themes or unsupported magisk modules or you have performed any system modifications
How to Install:
1. Wipe data, cache, dalvik, system
Flash ROM
Flash Gapps(optional)
reboot.
Install gapps right after installing the rom itself dont try to boot to system before that if you want to use gapps
NikGapps and BiTgapps were both tested and working
Downloads:
SourceForge
Source Code: https://github.com/Chatur27/Eureka-Kernel-Exynos7885-Q-R
ROM OS Version: Android 11
ROM Kernel: Linux 4.4.277
ROM Maintainer: Kevios12
Big Thanks to Team Eureka for his Kernel
@Chatur27 @Gabriel260BR​

Changelog 2021-09-18
• Initial Build with OSS Vendor
• September Security Patch
• Eureka Kernel R7.5 Enforcing
• Fix Vendor SPL
• AOD

Ok, I will be installing this one over the FE. I will test BT calls when I have installed it and report back.

BT calls are working but SD card doesn't mount, it wants to reformat it. It mounts ok in TWRP.

Hello, I am a novice and I want to change the original ROM of my smartphone for a LineageOs, and since there is no LinageOs rom made for the Samsung A40s (SM-A3050) I want to ask you if a Rom suitable for the A40 (SM-A405FN) will work for my A40s (SM-A3050)?

Hello everybody. Is this rom enought stable for daily use?
On Sourceforge I can see another update for LineageOs here: https://sourceforge.net/projects/eurekaroms/files/Samsung/A40/R/lineage
Does this update still contain BT call fix? There are "low framerate and stuttering on the home screen" like crDroid 7.7?
Thank you

My A405FN/DS is running SM-A405FN_2_20211030045838_jg43vcqbiw_fac (latest available stock ROM to date, downloaded with Frija) but won't boot any custom ROM.
I've been advised to flash the custom ROM's suggested kernel. What would it be ?

Sounds great, but does this rom have stable wifi connection? My wifi was disconnecting randomly on crdroid 7.13

Great job, I like it.
My question is about partitions: installing MindTheGapps give me an error 6
Can't mount /system partition not found.
Is there no /system in the A40 ?
- how to install microG of MindTheGapps?
Greetings,
keep doing this great work!

Tried the rom, doesn work. The bitgapps wont install, nikgapps installs ok... after flashing, simply black screen. phone dead, do not install.

[ROM] [11] [OFFICIAL] Project Kasumi 1.0 PoPiPa Beta for Redmi 9A/9C/9 Activ [garden]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Another weebified custom ROM aiming to be a home for weebs - Based on Project Materium, an optimized LineageOS-based Android aftermarket firmware with extra features, developed by people all over the world.
Quoting the LineageOS description:
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Click to expand...
Click to collapse
We offer vanilla and gapps variants. If you install a vanilla variant, the only supported Gapps package is MindTheGapps (gapps builds are not available for a few devices due to space issues).
Download & instructions:
Build February 1st, 2022
1. Take IMEI backup
2. Format data
3. Flash ROM
4. Flash Gapps
5. Reboot
Vanilla | Gapps
Old releases:
Spoiler
Nothing here yet.
IMPORTANT: If you are coming from another ROM, you need to format data (TWRP > Wipe > Format Data > *type "yes"*).
IMPORTANT: OTA updates require enabling recovery update in Setup Wizard (or, if you already set your device up developer options) - They do not support TWRP.
About:
Features:
Latest security patches merged from LineageOS
SafetyNet passing WITH Magisk Hide without other changes in an Gapps build
Many optimizations coming from Stellar OS/Project Materium
New wallpapers & bootanimation (WIP)
QS customization (tint, rows customizer, data usage)
Status bar customization (4G/LTE toggle, new NFC & VoLTE icons)
Kill app from notification
Notification pulse
KitKat-style notification ticker
Screenshot sound toggle
Per-app volume
WiFi & Bluetooth timeout
Smart Charging & Cutoff
Sensor, Wakelock and Alarm blocker
Battery info on lockscreen
Improved microG support (signature spoofing, location support)
...and more! (We accept suggestions!)
The ROM is currently in Beta stage! Unforeseen bugs might occur - We kindly ask for your feedbacks WITH LOGS in our Telegram chat!
What's working:
Almost everything
Bugs:
Hotspot not working (use Magisk module to fix)
You tell me
Sources are available at https://github.com/ProjectKasumi and https://github.com/garden-dev/android_device_xiaomi_garden
ROM Founded and Developed By: Beru Shinsetsu (Wind/owZ)
ROM Designed By: Ayuko, Qirkl and AITEx64.
ROM OS Version: 1.0 "PoPiPa"
ROM Kernel: 4.9.190
ROM Firmware Required: MIUI 12.0.10 Global
Based On: Project Materium 1.0 (LineageOS 18.1)
Version Information
Status: Stable
Current Stable Version: 2022-02-01
SELinux Status: Enforcing
Release Date: 2021-12-28

Screenshots taken from Redmi 9A by @Leo

where i can download this rom?

Can i flash this rom on my device ? Root need or what?

download link broken pls update

cykip said:
download link broken pls update
Click to expand...
Click to collapse
if you're having download problems then change the .tk with .net
Goindex
Combining the power of Cloudflare Workers and Google Drive will allow you to index your files on the browser on Cloudflare Workers.
dl.ayokaacr.net