Hi, i have upgrade my android phone (china), but i have lost many compatibility app. I don't know why, because befor update, the app work great. What i need modifiy for have same compatibility ?
thx in advanced
Hi All
Anyone with the P5110 running PPPWidget with Cyanogen 10.1 ?
Is this just a config of the APN details? Its on T-Mobile uk
APN - general.t-mobile.uk
USERANME - user
Password - mms
any help or guidance much appreciated!
UPDATE: Ok so it looks like after a reboot and another attempt this IS actually a lack of drivers problem. Can anyone suggest a Jelly Bean Rooted Rom that will work with PPPWidget or simply have the APN/Mobile network settings so that I can get this working Please
Many Thanks
jason
Here are some useful links read through and they will sure to help
http://forum.xda-developers.com/showthread.php?t=1513490
http://forum.xda-developers.com/showthread.php?t=1894999
http://forum.xda-developers.com/showthread.php?t=1795591
Sent from my C6603 using Tapatalk 2
Hi
thanks will check out the links. From Josh - PPP Widget creator - and rereading his forum in day light it is clear that he does not tackle custom roms, obviously there are too many when you stop to think about it.
so two options seem open to me -
1 get these files for the rom "ppp_async", "option" and "cdc_acm"
2 go to stock ROM that PPP have already got working
Will read the links and see if they help clear up which direction to head in.
Jarope
NEXT kernel has option, ppp_async, and usb_wwan kernel modules. Is cdc_acm really necessary?
Any suggestions on how to install this on my archos g9 101 withi this rom?
http://forum.xda-developers.com/showthread.php?t=2104491&highlight=wlan
pppwidget is installed but when i connect my usb-ethernet device it comes no driver.
on another rom it worked perfectly...
After doing some research on this Tablet, I have found out that it has a bcm4330 broadcom wifi chipset. Basically what I want to do is enable monitor mode and packet injecting. Some of the work has been done thanks to these guys who have rewritten the firmware to enable monitor mode http://bcmon.blogspot.com/
And this guy for a good gui [URL="http://forum.xda-developers.com/showthread.php?t=2233282"]http://forum.xda-developers.com/showthread.php?t=2233282
Can someone help me get it to work on this device? I have installed the aircrack gui app and put the firmware in it. But I don't know how to get the module which is required by the app. So what I am asking for is someone to help me by either telling me how to compile the kernel with the module or else do it for me. I have done some looking around but I have not found a user friendly way to compile the kernel to get this to work. I only got this tablet a week ago and I want to learn about it and use it to it's fullest potential. I have already rooted it.
You can download the aircrack gui app from the second link and the firmware from the first.
Thanks in advance.
Sero 7 Pro Has Working Monitor Mode, Aircrack, and Reaver!
When it comes to handheld penetration testing, I still adore my Nokia N900, but that is starting to change ever since I realized that it was possible to get monitor mode on other more modern devices using various Broadcom Wifi chipsets. I recently managed to get monitor working on my Sero 7 Pro tablet. I have the DoPa v1.1 ROM installed, and I used the bcmon.apk from bcmon.blogspot.com/, which can be downloaded at https://code.google.com/p/bcmon/. Android development is certainly not my primary focus, but after view the post above, and craving a Nexus 7 PwnPad, I couldn't resist giving it a try.
My Sero 7 Pro Running Aircrack-ng and Wash for Reaver
http://youtu.be/HVYnnYMCuC0
My Sero 7 Pro running Reaver
http://youtu.be/rwg92IZubOA
Flashfire21 said:
After doing some research on this Tablet, I have found out that it has a bcm4330 broadcom wifi chipset. Basically what I want to do is enable monitor mode and packet injecting. Some of the work has been done thanks to these guys who have rewritten the firmware to enable monitor mode http://bcmon.blogspot.com/
And this guy for a good gui [URL="http://forum.xda-developers.com/showthread.php?t=2233282"]http://forum.xda-developers.com/showthread.php?t=2233282
Can someone help me get it to work on this device? I have installed the aircrack gui app and put the firmware in it. But I don't know how to get the module which is required by the app. So what I am asking for is someone to help me by either telling me how to compile the kernel with the module or else do it for me. I have done some looking around but I have not found a user friendly way to compile the kernel to get this to work. I only got this tablet a week ago and I want to learn about it and use it to it's fullest potential. I have already rooted it.
You can download the aircrack gui app from the second link and the firmware from the first.
Thanks in advance.
Click to expand...
Click to collapse
Hi,
Before anyone complains I have spent hours searching google and XDA and seem to find conflicting information so requesting assistance and clarification in regards to running viper4android on lollipop. My knowledge on android is limited so apologies if this is a silly question.
I have a SM-N915FY that was running viper4android until I upgraded to lollipop. My understanding is that viper4android requires SElinux to be set to permissive rather than enforcing in order to function? I'm not sure as to what the SElinux status was when using KitKat as it was functioning fine.
SElinux mode changer does appear to work on a stock due to KNOX, despite uninstalling the KNOX apps with titanium backup. In order to set SElinux to permissive do I need to wait/hope for a KNOX free kernal to be released for my device?
I've read that SElinux can be set to permissive on boot via init.d, has anyone managed to do this successfully?
Sent from my SM-N915FY using XDA Free mobile app
Not sure where you're getting this. I'm running viper4android fine on all my stock touchwiz devices on KitKat where SElinux is locked on enforcing.
Has something to do with lolipop
Sent from my SM-N915P
jooniloh said:
Not sure where you're getting this. I'm running viper4android fine on all my stock touchwiz devices on KitKat where SElinux is locked on enforcing.
Click to expand...
Click to collapse
He is completely right. Lollipop isn't letting it function like KK did. There had to be a kernel that allows permissive for it to work on lollipop.
I am patiently awaiting Samsung to release the source code for the t mobile edge, I lost my viper usage ever since I upgraded
misterwal10 said:
He is completely right. Lollipop isn't letting it function like KK did. There had to be a kernel that allows permissive for it to work on lollipop.
I am patiently awaiting Samsung to release the source code for the t mobile edge, I lost my viper usage ever since I upgraded
Click to expand...
Click to collapse
Yeah, I just read up about this. Of course, since we have pretty much no dev support, we'll probably not get custom kernels any time soon. Oh well. Just one more reason I'm staying on KK.
misterwal10 said:
He is completely right. Lollipop isn't letting it function like KK did. There had to be a kernel that allows permissive for it to work on lollipop.
I am patiently awaiting Samsung to release the source code for the t mobile edge, I lost my viper usage ever since I upgraded
Click to expand...
Click to collapse
The kernel source is already released. Check here. The problem is to compile it with SeLinux permissive. I struggle since few days to compile it but without success.
It boots but I loose baseband and it reboots every 1-2 minutes. My kernel thread is here if you have knowledge how to fix this problem, I will compile it also for N915T.
Best regards.
Guys look on the v4a main thread i looked ln and someone posted an init.d script that FINALLY allowed me to use v4a on lp again go maybe 5-6 pages back and if your phones dont have init.d support just search for 'init.d support for stock roms' good luck guys (also its very weird but se linux is still enforcing #1 and #2 v4a was installed by just regular install i.e not a system app and all my convolvers are working etc, im crazy excited and i dont want to mess with it but the tweaker in me just has too =^)
Hello,
First of all this is an online TV watching app here in Belgium provided by my provider called Telenet link.
It works fine when I'm not rooted, so no SuperSU installed and no su binary. I did some testing and tried "RootCloak" and "No Device Check" but that causes the app to force close after logging in. What can be the cause of the app force closing with RootCloak or No Device Check enabled? I think the app only checks if SuperSU is installed because I'm using systemless root. But again I'm not certain.
Thanks in advance
GianniDPC said:
Hello,
First of all this is an online TV watching app here in Belgium provided by my provider called Telenet link.
It works fine when I'm not rooted, so no SuperSU installed and no su binary. I did some testing and tried "RootCloak" and "No Device Check" but that causes the app to force close after logging in. What can be the cause of the app force closing with RootCloak or No Device Check enabled? I think the app only checks if SuperSU is installed because I'm using systemless root. But again I'm not certain.
Thanks in advance
Click to expand...
Click to collapse
Any solution yet? All the old tricks don't work
+1 please someone have any solution?
build.prop change is not working anymore
hide root is not working anymore
SU temp unroot not working anymore
djcedric said:
+1 please someone have any solution?
build.prop change is not working anymore
hide root is not working anymore
SU temp unroot not working anymore
Click to expand...
Click to collapse
Ik heb hetzelfde probleem, helaas nog geen oplossing voor mn geroote GSM en tablet
Telenet SUX !!!
same problem here: does anyone have a solution to hide root completely? I don't want to unroot my phone, then facebook will drain my battery again
ciao.
still looking for a solution,nobody?
the problem is that telenet now is working with Microsoft PlayReady DRM, is there any solution to make it work on rooted devices?
On cm13 the app worked fine until I flashed xposed framework....
Here same problem ! No solution yet ?
Sent from my A0001 using XDA Free mobile app
Waiting for a solution.
RootCloak+Exposed does not seem to work (anymore).
Is there any expert who got it working on a rooted device?
Did anyone try an older version of Yelo Play? Do they still work?
keeping an eye on this thread as well hoping someone finds a solution
damm just experienced the same problem. even on my jailbroken ipad
same here, any breaktroughs?
Nope
Sent from my LG G2 using XDA Labs
Hello, looking for the same solution for my android tv sticks. Anybody checked 'Magisk' ? Hope to hear good news
I hacked a version for my personal need (pretty easy to do, but every time telenet comes out with a new app I need to redo the hack because of the update policy) and it is working on rooted devices but it is only for Lollipop roms (5.0 and 5.0.1) and lower.
You can download here, if in the future Telenet updates the app I will try to release a new hacked one.
https://mega.nz/#!11Qm0QjR!YW_AIMN_5Sx_YRCFt9dBTQqhWNebWrllLfbi_aQ-XeA
civato said:
I hacked a version for my personal need (pretty easy to do, but every time telenet comes out with a new app I need to redo the hack because of the update policy) and it is working on rooted devices but it is only for Lollipop roms (5.0 and 5.0.1) and lower.
You can download here, if in the future Telenet updates the app I will try to release a new hacked one.
https://mega.nz/#!11Qm0QjR!YW_AIMN_5Sx_YRCFt9dBTQqhWNebWrllLfbi_aQ-XeA
Click to expand...
Click to collapse
Thanks civato, this works on my Huawei Mate with Android 4.4.2 I had to uninstall the original version first, update only resulted in streaming problem.
I am interested how you managed to crack or is this a secret you don't want to share?
What is the problem to make it work on Android 6.0?
paulcl said:
Thanks civato, this works on my Huawei Mate with Android 4.4.2 I had to uninstall the original version first, update only resulted in streaming problem.
I am interested how you managed to crack or is this a secret you don't want to share?
What is the problem to make it work on Android 6.0?
Click to expand...
Click to collapse
Android is open source to me so no secrets here.
It is a older yelo play (4.3.0) that I changed. I just change the build version (matching the new yelo play app so it doesn't wan't to update) Then I recompile and sign it.
As 4.3.0 only supports up to Android 5.0.1 and doesn't have the DRM stuff Telenet put in the 4.7.1 and higher , but it was from 4.7.1 that it started to support android 6.0.
Maybe if I got more time to look into the smali files and try to get around to detect method for rooted phones I can get a better solution for this problem.
civato said:
Android is open source to me so no secrets here.
It is a older yelo play (4.3.0) that I changed. I just change the build version (matching the new yelo play app so it doesn't wan't to update) Then I recompile and sign it.
As 4.3.0 only supports up to Android 5.0.1 and doesn't have the DRM stuff Telenet put in the 4.7.1 and higher , but it was from 4.7.1 that it started to support android 6.0.
Maybe if I got more time to look into the smali files and try to get around to detect method for rooted phones I can get a better solution for this problem.
Click to expand...
Click to collapse
OK, thanks for the clarification. I will try to use suhide on my new phablet with Android 6.0
I just don't understand why Telenet refuses rooted phones, on a PC you are allowed to be administrator with much more possibilities for "misuse" than on Android.
civato said:
I hacked a version for my personal need (pretty easy to do, but every time telenet comes out with a new app I need to redo the hack because of the update policy) and it is working on rooted devices but it is only for Lollipop roms (5.0 and 5.0.1) and lower.
You can download here, if in the future Telenet updates the app I will try to release a new hacked one.
https://mega.nz/#!11Qm0QjR!YW_AIMN_5Sx_YRCFt9dBTQqhWNebWrllLfbi_aQ-XeA
Click to expand...
Click to collapse
Hey, thnx. Gonna test this. Great work by the way, I've been looking to hack it to but I'm a noob so... Keep us posted if you get round to the latest builds
Update: when I try to watch tv on my android tv stick, I only get the possibility to swipe it to a TV. How do I fix this please?
No more news ?