Related
My Thunderbolt is locked somehow, and I have no way to restore it to factory defaults. What I mean by "locked" is as follows:
I remove two apps from the device, change the wallpaper and delete a contact. Then, I restart the device - when it boots back all of the changes I made are gone. It's like in read-only mode, the changes look like they take affect but after a reboot everything is restored to it's current FC'ing on everything state.
I've tried factory resetting the device but instead of booting to recovery it just boots to the picture of a phone with the red caution symbol showing, it does not do anything else.
I've tried flashing over a stock RUU image but the flash either 1) looks like it works then boots back to the state it was before, 2) hangs on part of a flash and reboots to the normal state.
The device is not rooted, I've tried revolutionary and get the following error:
"rawadb_handle_msg" and then it loses connection.
Any ideas would be appreciated, I've never seen anything like this.
Turn it on and let it boot up if it can then pull the battery while its on and leave power off for 5 minutes then try again.
Also can try, with power off, hold power button and volume down button together for a few seconds and when it gets to the white screen wait for about 10 seconds then select reboot from there
Latest OTA patched the Revolutionary exploit (so it won't work). You may want to root using ADB and flash the rooted RUU. Can't say I've ever seen R/O behavior; but then again, I've been rooted for months - currently on AOSP (ShiftAo5p 2.8) and waiting for an ICS with data
I know, not too helpful, but there are still ways to root.
Any feedback from VZW or a "real" corporate store? They're actually quite helpful here with tech junkies.
OK, one more suggestion - early on, I couldn't do anything either (Market, etc) and the fix was to pave (format) my SD card. I know it sounds weird, but I was going to exchange my phone (ordered, then sent back replacement). I figured, what the heck. Took the uSD card out, put it into my PC's USB port and formatted it FAT32, popped it back in and VOILA - happy happy joy joy.
Granted I copied all the data off of it before paving - then copied back selectively (highly recommend AirDroid, by the way, no more cables). Might give this a shot.
Hey guys, thanks for the suggestions - unfortunately no luck on my end with that
nautical34 said:
Hey guys, thanks for the suggestions - unfortunately no luck on my end with that
Click to expand...
Click to collapse
I inserted the card freshly formatted (I wasn't rooted at that point) - nothing on it, and I booted up, I was able to install Market apps (which I couldn't do before) - Note - AFTER I also did (multiple) a factory reset, I was good.
That didn't work for you? Maybe try again? Or just No-Go?
Also helps prove every 'Bolt has its own personality
Good luck on your CLNR ...
I have no idea what errant app or corrupted data may have been on the card, but totally paving and starting over "fixed it". Soon after, I rooted Then I had choices Granted I've had times I've had to do a factory reset (but not pave the SD) and set up all again - I've found the larger games (haven't determined which yet) cause my phone to get into reboot fits if I do actually reboot (which I need to do sometimes to get the radios to get data again); so, boring maybe, but very few games installed. That's OK, I prefer to learn or listening to music during idle time. Good luck.
I've had my Oneplus One since the beginning of 2015, up until now it's been honestly fantastic, with very few issues whatsoever, certainly nothing that has bothered me at any rate. That's up until last night;
My phone was lying on my desk next to me with the screen on updating some applications whilst I was writing on my computer - suddenly, it starts to vibrate, one continuous long note, I naturally picked it up and looked at it, at which point the phone turn itself off in my hand. That was unfortunately the last I ever saw of my phone alive. This happened at about 6PM yesterday evening, since then I've tried everything within my power to get it to work. I can't access the bootloader, in order to get to fastboot (which would allow me to fix all my issues by enabling me to refresh the device), nor can I access my recovery. The phone turns on and displays nothing, it vibrates, but that's it.
The phone was running the latest COS13.1.1 update (X1) which I had flashed the day before, it was running the stock kernel for the ROM, the ROM was however rooted.
I know a fair amount about android, I also know a fair amount about the OPO, to me, I think something about the LOGO partition has gone wrong. The LOHO partition being responsible for the images shown in the bootloader, fastboot, splash screen etc.... I'm just not sure how that would have happened.
Either way, I don't know what to do, the one doesn't register to my computer in fastboot or adb , so both those routes seem closed. I primarily use a Mac for my work, I'm yet to try plugging the phone into a PC.
I've submitted a ticket to OP, and have spoken to an adviser who moved my case to a 'specialist', but I'm yet to hear back on that one.
Any help would be massively useful, because I need this phone for my work, and just general communication.
Thanks for reading,
Ben
Here, try this http://http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Hi!, I have a RAZR D3 (XT919). It ships with Android 4.1.2, but I upgraded it to 4.4.2. A few days ago, I dropped it, and the screen shattered, the screen itself it's not broken, I mean, it displays what it needs to, but half of the screen lost the "touch" capabilities, meaning that I can't input my unlock pattern. I've tried everything in order to be able to unlock it (do not ask why I need it to be unlocked, I just NEED it unlocked), I tried through ADB, but, USB debugging is not enabeld (it actually IS enabled, but I can't confirm the debugging access to my pc because it does not show up the window that asks for confirmation, and, even if it did, I would not be able to tap it not because of the broken screen, because I think the touch part that is still working is in range, but because it would not let me tap it in the unlock screen), I tried through flashing a zip file (actually, lot's of them) that in theory disabled the pattern... yet, no luck (I'm aware that I may needed to input a random pattern, it didn't worked), I tried a file manager made for recovery mode, didn't worked either. So, in short terms, I tried tons of things to unlock the damn phone (factory reset is not an option) and nothing works. I just don't know what to do, I will be buying a new one, of course, but I need it unlocked right now. Oh, I also tried with a USB-OTG cable with either the pc keyboard and mouse, the device simply does not support it. So... yeah, I'm pretty much screwed. Don't be afraid to post any complicated solution, just keep in mind, to make it as clear as possible, thanks for caring and I hope somebody would be able to help me!
XDA Visitor said:
Hi!, I have a RAZR D3 (XT919). It ships with Android 4.1.2, but I upgraded it to 4.4.2. A few days ago, I dropped it, and the screen shattered, the screen itself it's not broken, I mean, it displays what it needs to, but half of the screen lost the "touch" capabilities, meaning that I can't input my unlock pattern. I've tried everything in order to be able to unlock it (do not ask why I need it to be unlocked, I just NEED it unlocked), I tried through ADB, but, USB debugging is not enabeld (it actually IS enabled, but I can't confirm the debugging access to my pc because it does not show up the window that asks for confirmation, and, even if it did, I would not be able to tap it not because of the broken screen, because I think the touch part that is still working is in range, but because it would not let me tap it in the unlock screen), I tried through flashing a zip file (actually, lot's of them) that in theory disabled the pattern... yet, no luck (I'm aware that I may needed to input a random pattern, it didn't worked), I tried a file manager made for recovery mode, didn't worked either. So, in short terms, I tried tons of things to unlock the damn phone (factory reset is not an option) and nothing works. I just don't know what to do, I will be buying a new one, of course, but I need it unlocked right now. Oh, I also tried with a USB-OTG cable with either the pc keyboard and mouse, the device simply does not support it. So... yeah, I'm pretty much screwed. Don't be afraid to post any complicated solution, just keep in mind, to make it as clear as possible, thanks for caring and I hope somebody would be able to help me!
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please create an XDA account so you can post in the other sections.
Then you can post your question here:
http://forum.xda-developers.com/android/help
You'll receive expert advice there.
Good luck and welcome to XDA!
My dad is a home improvement guy and apparently people left some things behind and the new owner didn't want them. One of these things ended up being a Tablet, now I'm understanding why it was given up. It starts and immediately loads into Soti MobiControl and I can essentially do nothing with it. I've both Factory Wiped Via recovery mode and tried to remove the sim and booting into safe mode which also didn't work.
The next step was to even see if I could do anything Odin related to it and I can't enter download mode I'm assuming since it appears to be an old work device, they likely didn't have USB Debugging on. So that wouldn't work for me either.
TL;DR
I have this tablet that has an app on it that doesn't allow me to do anything with it and so far what I've tried has done nothing. Does anyone have any clue ?
Hi!
Since I don't know what this app do or what it can restrict, I'll be having some issues but I'll try my best to help you.
First, Can you boot into system and go to settings? If yes, then go to About device --> Build Number --> Tap 7 Times.
^_^
After searching about Soti Mobicontrol, I found this:
Uninstaller
Please try this and reply.
^_^
Hello, my phone today did something very strange, the screen began to turn off and on, and the touch stopped working, try to restart it, and curiously while initial screen works normally, is when it starts MIUI itself that begins to present the failure, the screen goes black, although it sounds the boot sound, and if I press the power button, the screen what it does is flashing without responding the touchscreen (as indicated above), my phone has the latest official version (global), and do not have any changes in the operating system, or anything special. I tried to delete the configuration using the phone menu (volume up + power) sweeping the system, and as I indicated, at that time the phone seems to work properly (until I give start the operating system, and begins to fail), I do not know what else to do, since I had never activated the developer features, or USB debugging and not even think about unlocking the bootloader.
I guess I will have to take it to repair, but I want to avoid ending up being scammed by some nonsense or bug in the system, and that I return the phone as a scrap (most technicians, always end up missing and surplus parts, damn it).
Any guidance or advice would be most welcome,
Blessings.
luismmusic said:
Hello, my phone today did something very strange, the screen began to turn off and on, and the touch stopped working, try to restart it, and curiously while initial screen works normally, is when it starts MIUI itself that begins to present the failure, the screen goes black, although it sounds the boot sound, and if I press the power button, the screen what it does is flashing without responding the touchscreen (as indicated above), my phone has the latest official version (global), and do not have any changes in the operating system, or anything special. I tried to delete the configuration using the phone menu (volume up + power) sweeping the system, and as I indicated, at that time the phone seems to work properly (until I give start the operating system, and begins to fail), I do not know what else to do, since I had never activated the developer features, or USB debugging and not even think about unlocking the bootloader.
I guess I will have to take it to repair, but I want to avoid ending up being scammed by some nonsense or bug in the system, and that I return the phone as a scrap (most technicians, always end up missing and surplus parts, damn it).
Any guidance or advice would be most welcome,
Blessings.
Click to expand...
Click to collapse
did you try to installing the firmware with miflash?
tutibreaker said:
did you try to installing the firmware with miflash?
Click to expand...
Click to collapse
Can you tell me where to get that tool? The fact is that I have tried several, and they tell me that I need to have USB debugging activated, and/or have the bootloader unlocked.
In other words, isn't there a tool that allows me to reinstall the software (which the phone already has installed), without having to activate anything in particular on the phone? I am not changing the rom from one region to another, nor am I installing a custom rom, I just need to try to see if what the phone has is a software failure or not.
luismmusic said:
Can you tell me where to get that tool? The fact is that I have tried several, and they tell me that I need to have USB debugging activated, and/or have the bootloader unlocked.
In other words, isn't there a tool that allows me to reinstall the software (which the phone already has installed), without having to activate anything in particular on the phone? I am not changing the rom from one region to another, nor am I installing a custom rom, I just need to try to see if what the phone has is a software failure or not.
Click to expand...
Click to collapse
using edl mode you can flash your phone but most tool than use that mode are paid
tutibreaker said:
using edl mode you can flash your phone but most tool than use that mode are paid
Click to expand...
Click to collapse
Yes, I see, or Xiaomi is very confident that the equipment they sell will be few, that they will present faults, that can be solved by the user himself simply by reinstalling the system, or as always the Peter principle, they are arriving little by little to its level of ineptitude, releasing dozens of models per year, without really caring about giving really reliable user support, although I think that is already a general policy, almost no manufacturer offers the option of completely reinstalling the phone software from a management app, as happened a couple of years ago, in fact I think that Xiaomi's own application has become obsolete and out of circulation, right?
Because my point remains the same, if my phone is completely vanilla, and for x, y or z situation I need to reinstall the software, then what the hell is the need for the user to have the developer options enabled, and the USB debug ? That makes no sense to me, because I have to pay a third party, for something that is completely free on the internet and freely accessible, but that the company itself now hinders the user from being able to restore his phone without so much complication.
I don't know if I'll be crying and complaining too much about it.
Well I have no choice but to breathe deeply, and that the technician can really find the problem and that it is repairable, and does not give me back a pot.