Is my moto g xt1032 dead?
i started an systemupdate on my device not really reading what im clicking on, but it started to update.
the little android was lying there and the update goes on
when i wanted to look for progress after a while the moto g was black
nothing worked
i think the battery went down and the update couldnt complete
the only thing is that the led is blinking for a while when i put it on usb cable to load the battery, but after hours of loading nothing happens
can someone tell me how to turn it on again?
Try this: http://forum.xda-developers.com/showpost.php?p=63831563&postcount=2
lost101 said:
Try this: http://forum.xda-developers.com/showpost.php?p=63831563&postcount=2
Click to expand...
Click to collapse
i tried all types of button pressing but nothing works
so after reading many posts on different forums i came to jtag
and i tried this : http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
but Motorola qboot utility v2.4 only shows me this message:
opening device: \\.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ 0.000s]
identifying device
...serial = 0x1F48A61
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.000s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.000s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
Click to expand...
Click to collapse
These may help: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798 - but if your Bootloader has been updated then there is no working solution at this time.
lost101 said:
These may help: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798 - but if your Bootloader has been updated then there is no working solution at this time.
Click to expand...
Click to collapse
fine that people are READING my posts^^
its the same link ive already posted
Related
can someone help me ?my moto g XT1033(AS)flashed to be a brick.
my PC sys is win8.1 update,link moto g just like this:
Qualcomm HS-USB QDLoader 9008(COM5)
excuse my poor english,i'm a guy must use goagent to link to XDA...:crying:
Checkout this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
dedeep said:
Checkout this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Click to expand...
Click to collapse
thank u！but it was not work。。。just like this：
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
OKAY [ 0.002s]
identifying device
...serial = 0x2621621
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.006s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.004s]
validating files
OKAY [ 0.001s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.002s]
sending programmer
OKAY [ 0.010s]
flashing singleimage
ReadFile() failed, error=5
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
or like this：
opening device: \\.\COM3
OKAY [ 0.005s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 2.336s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
How to ？thank u！
dedeep said:
Checkout this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Click to expand...
Click to collapse
NOW，I know that，the only thing i can do now is just wait for MBM-CI，5.0 official。
thank you very much！
Can you boot into recovery mode or all that you get is a blank screen?
Can you post a photo of the cellphone screen?
Cheers!
So I think I have hardbricked my Moto G, so I went from Lollipop to 4.4.4 GPE and then to 4.4.2 Retail and after that I Updated via WLAN to 4.4.4 Retail.
Now my Phone doesn't turn on or anything.
I've followed this Guide:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
But with no success.
I'm always getting this error after using the blank flash:
C:\Users\Ricardo\Desktop\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x241047D
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ -0.000s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ -0.000s]
validating files
OKAY [ -0.000s]
switching to download mode
OKAY [ 0.000s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
C:\Users\Ricardo\Desktop\blankflash>pause
Pls help me I dont want to buy a new Phone and I need this Phone, it is really important for me to get this Phone working.
xBiOTeCHx said:
So I think I have hardbricked my Moto G, so I went from Lollipop to 4.4.4 GPE and then to 4.4.2 Retail and after that I Updated via WLAN to 4.4.4 Retail.
Now my Phone doesn't turn on or anything.
I've followed this Guide:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
But with no success.
I'm always getting this error after using the blank flash:
C:\Users\Ricardo\Desktop\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x241047D
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ -0.000s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ -0.000s]
validating files
OKAY [ -0.000s]
switching to download mode
OKAY [ 0.000s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
C:\Users\Ricardo\Desktop\blankflash>pause
Pls help me I dont want to buy a new Phone and I need this Phone, it is really important for me to get this Phone working.
Click to expand...
Click to collapse
You can't do anything at the moment. Waaay to many of us has the same problem. We needed to wait for the official motorola lollipop factory image. You can find more information at this thread.
tommark75 said:
You can't do anything at the moment. Waaay to many of us has the same problem. We needed to wait for the official motorola lollipop factory image. You can find more information at this thread.
Click to expand...
Click to collapse
But the Lollipop OTA for the Brazil Version is already out I think, so isn't it possible to get the MBM-CI from this OTA?
xBiOTeCHx said:
But the Lollipop OTA for the Brazil Version is already out I think, so isn't it possible to get the MBM-CI from this OTA?
Click to expand...
Click to collapse
No becasue it is an OTA not a factory image. If it was possible than the developers already did it. But sorry it is not possible, just wait until motorola publish it.
I have the same problem.
tommark75 said:
No becasue it is an OTA not a factory image. If it was possible than the developers already did it. But sorry it is not possible, just wait until motorola publish it.
Click to expand...
Click to collapse
I have the same problem.
I have flash GPE 5.0.1 -> ROM Stock Motorola 4.4.2 + update ota 4.4.4 = Bootloader brick and no startup / fastboot ( anything!)
If anybody know how to save my device (XT1032)...
Thank XDA
We already know the solution, but we are needed to wait for the official motorola frimware.
what is the solution?
tommark75 said:
We already know the solution, but we are needed to wait for the official motorola frimware.
Click to expand...
Click to collapse
what is the solution?
felicuchi1 said:
what is the solution?
Click to expand...
Click to collapse
The solution is to wait until more frimwares get leaked or gets released with the mbm_ci folder in it. If we found them the developers can do the programming stuff with it. They know how to do it, but we don't have the good files. So we are waiting at the moment. For more information go to THIS thread and follow it. But please don't ask for help there, you can see a lot of people complaining but if we found the files, that thread will be the first where it will be published.
any good news?
Hey,
I have a huge problem with my phone right now. When I made a software update from 4.4.2 to 4.4.4 my phone shutted down while being in recovery and installing the new software. It shutted down, because the battery was low.
So now if I connect my phone to my computer, my computer detects it as Qualcomm HS-USB QDLoader 9008 (COM6).
I already tried this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
But when I open the flash-blank.bat I get this message: FAILED (blank-flash:greet-device:error reading packet)
The whole log:
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.002s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.002s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
Is there any hope to get it back to life?
Did you try This
Hit THANKS if I helped you!
@LasseWolpmann00 after you blank-flash you should be able to flash Stock ROM via fastboot
I'm having the same problems,. I think it has something to do with the MBM-CI of Lollipop.
I flash XT1032 Firmware on my XT1031 device,and It's on 9008 mode(QHSUSB_BULK),and i try this,It failed!
Code:
C:\Users\Andy\Desktop\blankflash\blankflash>qboot.exe blank-flash
opening device: \\.\COM10
OKAY [ 0.000s]
greeting device for command mode
OKAY [ 0.016s]
identifying device
...serial = 0x34F16F6
...chip-id = 0x801 (MSM8626)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer_8626.mbn
...singleimage = singleimage_8626.bin
OKAY [ -0.000s]
validating files
OKAY [ 0.016s]
switching to download mode
OKAY [ -0.000s]
greeting device for image downloading
OKAY [ -0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
:crying::crying::crying:.Who can help me?
The phone (XT1031, 16GB, Republic Wireless, 4.4.4) is low use and nothing different was done the day it developed the problem. It worked Monday, on Wednesday it flashed indicator and the screen wouldn't power. It was hard-powered off (held power) and it wouldn't turn on again. The computer does not detect it. I have installed the 64-bit driver for my Windows 7 and am attempting to 'blank-flash' without success. Can anyone assist? Attached is the log. Thanks in advance.
C:\Users\Test\Desktop\blankflash>qboot.exe blank-flash
opening device: \\.\COM3
OKAY [ 0.016s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3598E90
...chip-id = 0x801 (MSM8626)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer_8626.mbn
...singleimage = singleimage_8626.bin
OKAY [ 0.031s]
validating files
OKAY [ -0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.016s]
sending programmer
OKAY [ 0.047s]
flashing singleimage
Target LOG: Open multi failed, unknown error
Target ERROR: 7 - Open multi failed, unknown error
FAILED (sdl-transfer-image:send-image:sdl-open-multi:target error)
Anyone? Can anyone supply a copy of the corrupted file? Ideas? Any help would be appreciated.
Have a look here: http://forum.xda-developers.com/moto-g/development/guide-qhsusb-dload-workaround-t3182477
I have a moto g XT-1033 8GB running with 4.4.4 kitkat while installing system software update onit become hard brick. The computer recognize it as a Qualcomm device but I get a Blank-Flash Reading error("after blank flash at 12.14 hrs dt.24/7/2016
C:\Users\SrinivasaRao\Desktop\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM11
OKAY [ 0.016s]
greeting device for command mode
OKAY [ 0.016s]
identifying device
...serial = 0x2FDF6F7
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.036s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.016s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.016s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error reading packet)
C:\Users\SrinivasaRao\Desktop\blankflash\blankflash>pause
Press any key to continue . . . reading device"). I have tried with the blank-flash PL.GIVE a SOLUTION FOR RESTORATION.
by bsrao npalli , [email protected]
Hello and thank you for using XDA Assist,
please create an account and ask in our Android Q&A section:
Moto G Q&A, Help & Troubleshooting
The experts there should be able to help you.
Best regards & good luck
Trafalgar Square from XDA Assist