Related
https://github.com/USBhost/MX_FFmpeg is my modified source where i'm building from
You can download recent codecs here ( GitHub releases ) and 1.35.0-1.8.6 here ( Google Drive ).
Also the XDA download tab is no longer updated as for some reason I cant remove them.
INSTRUCTIONS
1. Check which version you need by going to Local Player Settings/Decoder/General
in the Custom Codec tab it will tell you which one is needed (x86,x86_64,neon,neon64/ARMv8).
Note: skip step 1 if your using aio (all in one) version
2. Download the one you need (No need to unzip it)
3. Go back to Local Player Settings/Decoder/General
and tap the Custom Codec tab then select the version you downloaded. DONE!
Frequently Asked Questions (FAQ) :
What's the difference between MX Player Codec Packs on Google Play and Custom Codec?
MX Player Codec Pack not only contains ffmpeg library, It contains many other libraries required to work properly. If you download MX Player from Google Play mostly it will contain the required libraries according to your device architecture. You have to install codec packs from Google Play only if MX Player asks to install. Custom codec is just a modified version of the ffmpeg library used in MX Player. It's modified to include support DTS/Dolby(ac3) audio tracks. So, Codec Pack is mandatory if MX Player asks to install it. Custom Codec is optional and It's required only if you want to play the videos with DTS & Dolby (AC3) audio tacks
Why Custom Codec is not updated even though MX Player is updated?
In Many occasions MX Player may updated without any changes to ffmpeg library. So, Custom Codec will also remain same. The custom codec version required will be directly forced by the player itself. So no need to worry about it. If it's not compatible MX Player will not load at all.
How do I know that my Custom Codec is outdated & needs an update?
Whenever MX Player is updated, It will check the custom codec version loaded. If it's outdated it will show a error message that shows "Custom Codec is out of date. Replace it with the new version". Otherwise there is no need to check this thread for the new Custom Codecs.
...
...
Thanks man!
I was looking for that!
Thanks. Will try it.
This is just what I was looking for. Nice work.
Re: MX Player Custom Codec With DTS Support [v1.7.11]
Many thanks.
Sent from my Sensation using xda app-developers app
Great, thanks a ton!
Watch the movies in mx player 1080p mkv format with DTS audio and 5.1 audio track.My mobile is moto defy arm v7 1.1GHz
new version
Unfortunately Ive just installed new 1.7.12..... so not working..... Wait for ktsamy
Re: MX Player Custom Codec With DTS Support [v1.7.12]
war1 said:
don´t work with galaxy nexus neon codec for mx player 1.7.12
Click to expand...
Click to collapse
What do you meant?
Can you explain the problem you are facing....
Does not play dts audio or any video?
Have you changed the rendering to HW+ or SW not HW...?
In the latest build of MX Player there is no option in preference to enable SW audio with hw playback.
You have to enable SW audio via audio track button if you are using HW rendering instead of HW+ or SW.
I have personally tested neon build and it is working perfectly.
Even my old build also working with the current version.
Sent from my GT-S5830 using Tapatalk 2
When I go to the Decoder section, click on the directory with the files, then MX Player restarts... I'm getting a popup. This is with MX Player 1.7.12 on a Nexus 4 (4.2.2 stock rooted):
Popup says...
MX Player:
Unsupported device or component file corrupted. Please uninstall the application completely then reinstall it if the problem persists.
OK
When I hit the OK button, MX Player closes and when I reopen MX Player, the codec files aren't selected anymore in the Decoder section. I've uninstalled and reinstalled MX Player a few times, also tried just Force Stop ing it, and clearing its cache, but the same thing happens. This was all working perfectly on 1.7.11, so I suspect it's something with the new version of MX Player, but I don't know how to tell what it is.
funtek said:
When I go to the Decoder section, click on the directory with the files, then MX Player restarts... I'm getting a popup. This is with MX Player 1.7.12 on a Nexus 4 (4.2.2 stock rooted):
Popup says...
MX Player:
Unsupported device or component file corrupted. Please uninstall the application completely then reinstall it if the problem persists.
OK
When I hit the OK button, MX Player closes and when I reopen MX Player, the codec files aren't selected anymore in the Decoder section. I've uninstalled and reinstalled MX Player a few times, also tried just Force Stop ing it, and clearing its cache, but the same thing happens. This was all working perfectly on 1.7.11, so I suspect it's something with the new version of MX Player, but I don't know how to tell what it is.
Click to expand...
Click to collapse
yes don't work with my nexus with the same error.
Nexus 7 the same bug..... Please, fix it, thank you!
Same problem
Having the same issue as funtek on my Neuxs 10 with version 1.7.12 of Mxplayer with this codec, both neon and not, tried them both. Same error message.
Your new link that you have posted when you recompiled the codec must have done it. That download is working for me on mxplayer 1.7.12 with no error message or corrupt codec message on the nexus 10. Weird... but very happy, many thanks brother! Must have just been corrupt.
AW: MX Player Custom Codec With DTS Support [v1.7.12]
I'm on a Samsung Galaxy S2 and the Codec in op wouldn't work.
The recompiled Codec works.
Sent from my GT-I9100 using xda app-developers app
AW: MX Player Custom Codec With DTS Support [v1.7.12]
The exact same message as in funtek's post.
I've noticed that the files in the alternative zip are only half the size as the files in op, perhaps the zip was messed up?
Sent from my GT-I9100 using xda app-developers app
Hi, Neon Codec on Galaxy Nexus: MX Player Pro crash after set the custom codec and restart application. Next time launched MX Player, the default codec is used.
Also tested tegra2 codec on Galaxy Tab 10.1 - this one is working fine.
I have a 3.25gb 1080p mkv and I have problem playing using mx player pro.
I have tried to switch to different mode - HW, HW+ or SW, video is fine but I got no sound at all.
If I use a different player like BS Player it works perfectly.
Note: I'm using Nexus 5 w/4.4.2 kitkat + Mx player pro 1.7.28 Armv7 Neon
redjersey said:
I have a 3.25gb 1080p mkv and I have problem playing using mx player pro.
I have tried to switch to different mode - HW, HW+ or SW, video is fine but I got no sound at all.
If I use a different player like BS Player it works perfectly.
Note: I'm using Nexus 5 w/4.4.2 kitkat + Mx player pro 1.7.28 Armv7 Neon
Click to expand...
Click to collapse
Can you post the mediainfo of the file?
If it has dts audio track then you have to use custom codec.
thanks, it's dts.
I have downloaded the custom codec and now it's fine.
However, may I ask why this codec didn't include in mx player in the first place?
Also the one from the google play doesn't work. I had to use this:
http://forum.xda-developers.com/apps/mx-player/mx-player-custom-codec-dts-support-t2156254
redjersey said:
thanks, it's dts.
I have downloaded the custom codec and now it's fine.
However, may I ask why this codec didn't include in mx player in the first place?
Also the one from the google play doesn't work. I had to use this:
http://forum.xda-developers.com/apps/mx-player/mx-player-custom-codec-dts-support-t2156254
Click to expand...
Click to collapse
The detailed answer is in the first post of the custom codec thread...!!!
In short DTS people is not ready to negotiate with SW players. So, to avoid copyright issues it's dropped from the official version.
Hi !
In France , an ISP called FREE released a new TV BOX which is called the Freebox Mini 4K.
This box runs Android TV .
It has a Broadcom BCM7252 Brahma15 dual-core 1.5Ghz SOC .
Many users have installed Kodi but there have some problems .
Many users use MXPlayer because it is the best player on this Android Box, it is on the AndroidTV Play Store and it has the best video quality. But however KODI works with HDMI and S/PDIF passtrough in AC3 / DTS .
Is it possible to have this option with MxPlayer ?
Can anyone assist in the French community? = D
hi, i have the same problem here:
with the new Sony Android TV, i think that MX Player it's the only way to play videos on that tv (VLC actually sucks), but there's that problem with DTS encoding!
Can mx player developers fix it? :good:
Same here in the US. The default plex player does not support mkv, so I have to use mx player pro. Unfortunately MX player pro does not give me the ability to pass through audio! My receiver can decode DTS, Dolby, etc I just need the player to do audio passthrough!
v 1.7.40 can do this. My device have native support for ac3/dts but with 1.8.1 MX refuse to play ac3. Damn it
Hmm @sumantaadk I assume that when it previously worked, you were using HW, and not HW+ ?
@ everyone else, I assume you have already tried the custom audio codec? MX by itself does not support DTS.
CDB-Man said:
Hmm @sumantaadk I assume that when it previously worked, you were using HW, and not HW+ ?
@ everyone else, I assume you have already tried the custom audio codec? MX by itself does not support DTS.
Click to expand...
Click to collapse
My device only support sw decoder for the video I have. I still can play ac3/dts with previous version but the beta completely remove the possibility. I think developer removed support due to copyright issue. So the current issue is bug or because of copyright?
AC3/DTS was support was removed by default due to copyright, yes; that's one of the main reasons to use the custom codec.
I would have thought that if you use HW and passthru to Android media framework to use the device's native render, that this method would have allowed for DTS...
sumantaadk said:
v 1.7.40 can do this. My device have native support for ac3/dts but with 1.8.1 MX refuse to play ac3. Damn it
Click to expand...
Click to collapse
sumantaadk said:
My device only support sw decoder for the video I have. I still can play ac3/dts with previous version but the beta completely remove the possibility. I think developer removed support due to copyright issue. So the current issue is bug or because of copyright?
Click to expand...
Click to collapse
Beacuse, you are using old custom codecs. If you want to play dts or ac3 you must use the custom codec compiled for the specific version of the player. After the update, if the old codec is found as incompatible it will be automatically unloaded. MX Player 1.8.x needs custom codec version 1.8.0.
Sent from my SM-G900H using Tapatalk
ktsamy said:
Beacuse, you are using old custom codecs. If you want to play dts or ac3 you must use the custom codec compiled for the specific version of the player. After the update, if the old codec is found as incompatible it will be automatically unloaded. MX Player 1.8.x needs custom codec version 1.8.0.
Sent from my SM-G900H using Tapatalk
Click to expand...
Click to collapse
Sorry but I am not using any custom codec. I am using unofficial cm11 which have inbuilt support for ac3/dts. I have clean MX player. Current market version support both ac3/dts.
sumantaadk said:
Sorry but I am not using any custom codec. I am using unofficial cm11 which have inbuilt support for ac3/dts. I have clean MX player. Current market version support both ac3/dts.
Click to expand...
Click to collapse
Can you play videos with dts/ac3 tracks in HW decoder?
Sent from my SM-G900H using Tapatalk
---------- Post added at 06:32 PM ---------- Previous post was at 06:29 PM ----------
Make sure that you have enabled HW+ audio on SW video.
HW+ is broken in 1.8.x on some devices according the beta page. If HW+ is broken in your device, you may not be get the audio.
Sent from my SM-G900H using Tapatalk
ktsamy said:
Can you play videos with dts/ac3 tracks in HW decoder?
Sent from my SM-G900H using Tapatalk
---------- Post added at 06:32 PM ---------- Previous post was at 06:29 PM ----------
Make sure that you have enabled HW+ audio on SW video.
HW+ is broken in 1.8.x on some devices according the beta page. If HW+ is broken in your device, you may not be get the audio.
Sent from my SM-G900H using Tapatalk
Click to expand...
Click to collapse
Yes. MX Play ac3 with hw decoder. I rarely use ac3 content so that's not the big deal for me. All other formats are suppoted with hw+ or sw.
sumantaadk said:
Yes. MX Play ac3 with hw decoder. I rarely use ac3 content so that's not the big deal for me. All other formats are suppoted with hw+ or sw.
Click to expand...
Click to collapse
Can you upload logs..?
Sent from my SM-G900H using Tapatalk
ktsamy said:
Can you upload logs..?
Sent from my SM-G900H using Tapatalk
Click to expand...
Click to collapse
Audio is auto disabled by MX in HW+
Hi, I found this old thread by searching DTS / AC3 Passthrough. So is this feature active in Mx Player pro. I have the 1.7 version with custom codec, and when I play DTS or AC3 file, the audio is automaticly converted by MX player into a 5.1 output, if I select a 5.1 preset on my AVR I can here 5.1 sound, but I would like to have the audio be direct stream to my AVR, and AC3/DTS be converted by my AVR.
virtual_francky said:
Hi, I found this old thread by searching DTS / AC3 Passthrough. So is this feature active in Mx Player pro. I have the 1.7 version with custom codec, and when I play DTS or AC3 file, the audio is automaticly converted by MX player into a 5.1 output, if I select a 5.1 preset on my AVR I can here 5.1 sound, but I would like to have the audio be direct stream to my AVR, and AC3/DTS be converted by my AVR.
Click to expand...
Click to collapse
Use HW decoder without custom codec. It will pass the audio stream to the audio receiver. If your receiver has dts/ac3 decoder, it will play true 5.1 channel (or whatever) present in the audio stream.
Sent from my SM-G900H using Tapatalk
Thank you for your answer it seems to work perfectly with HW, I have to try with HW+ to see if it works too.
virtual_francky said:
Thank you for your answer it seems to work perfectly with HW, I have to try with HW+ to see if it works too.
Click to expand...
Click to collapse
It won't work with HW+ or SW currently. Probably it may be possible in the next version 1.9.0
Sent from my SM-G900H using Tapatalk
Ok, thank you for your help, and lets wait for the next version.
hello, i found the info in this thread very useful thanks. However i wasnt able to quite get everything working so i was hoping someone might confirm i am doing everything right.
i'm using mx player on a nvidia shield to play a stream of h.264 video and Dolby Digital audio, its from my tv server. i want to pass through the audio to my avr which can handle this and looking at posts above i need to use the hw decoder without the custom codec. unfortunately i get no video with the hw decoder. with both the software and hw+ decoders i get video and then with a custom codec i get audio but its downmixed.
is the hd+ decoder with custom codec and downmixed audio the best i can expect for now and is it likely that the 1.9 release mentioned may fix this?
thanks!
Hello I've been having one really annoying issue with my beloved MX player which I love which is that the HW+ decoder either tells me it won't play videos I have through Plex app I have stored on computer or that it switches from HW+ to SW and SW doesn't play the videos properly they lag or play out of sync or the app crashes.
Now I know these videos where HW+ fails to work actually has played in the past though I would say that I recently flashed stock sony rom then using CWM flashed a custom rom but I did all this to try get HW+ to play my plex videos where it wouldn't either switch to SW or not play at all when the videos have played fine in the past.
I use MX player 1.7.40 (ARMv7 Neon)
Custom Codec 1.7.32 for AC3 Audio support
Phoenix Final Custom Rom for Xperia P using Nemeis Kernal 6.3
I understand that you guys need the logcat information and I read the thread about how do do that but I ran into a problem that when I downloaded the logcat app for mx player it returns an error "Cannot access the system log"
RyuBlade said:
Hello I've been having one really annoying issue with my beloved MX player which I love which is that the HW+ decoder either tells me it won't play videos I have through Plex app I have stored on computer or that it switches from HW+ to SW and SW doesn't play the videos properly they lag or play out of sync or the app crashes.
Now I know these videos where HW+ fails to work actually has played in the past though I would say that I recently flashed stock sony rom then using CWM flashed a custom rom but I did all this to try get HW+ to play my plex videos where it wouldn't either switch to SW or not play at all when the videos have played fine in the past.
I use MX player 1.7.40 (ARMv7 Neon)
Custom Codec 1.7.32 for AC3 Audio support
Phoenix Final Custom Rom for Xperia P using Nemeis Kernal 6.3
I understand that you guys need the logcat information and I read the thread about how do do that but I ran into a problem that when I downloaded the logcat app for mx player it returns an error "Cannot access the system log"
Click to expand...
Click to collapse
If you are using custom rom, they might have modified the Android Media Framework. It will break the MX Player's HW+. If it's not working Just turn it off & use HW instead.
MX Player 1.8 final is expected to get alternative HW+ engine that may work in most of the devices. Kindly be patient till that
Sent from my SM-G900H using Tapatalk
hello,
I might buy the Galaxy S8 Plus ( Snapdragon Model ) soon but need to make sure it can play an h.264 10-bit video using hardware decoding.
name of the video: [1080p][16_REF_L5.1][FLAC_5.1]Suzumiya Haruhi no Shou****su BD OP.mkv
this is a link for the sample video:
https://www.koi-sama.net/files/hi10/
I really appreciate the help, thank you.
I tried them on my Verizon 8+ and get "unsupported video codec" using the default video player.
I have not tried d/l VLC or an alternative to see if that works, it may.
could you please check using mx player h/w+ or h/w
MX Player hw+ doesn't seem to have a problem with any of the sample video decoding, got a complaint about unsupported audio (AC3) on one of the files though.
thank you for your help, I just purchased the phone ( G955U ) and it isn't working on hw+, is there a Rom or kernel you are using?
I'm using bone-stock as provided by Verizon, with all current system updates.
Videos d/l to local SD card and played off that from within MX Player. I noticed some traffic where spawning video playback via file explorer may not work in some cases so I opened the file directly in MX.
The MX Player I used was the free edition, freshly installed.
I have since bought MX Player Pro, and of course it works on my device.
System performance settings are at the default, no tweaking so far (phone is 4 days old).
Good luck, sorry I don't have more help to offer, still new with the device.
thanks for all your help, I really appreciate it.
If you haven't installed their codec pack, get it. I think it will fix your problems: MX Player Codec (ARMv7 NEON)
hello, tried it and didnt work, it does run 4k hevc 10-bit using hw but cant run h.264 10-bit unless I use sw (works well but fast battery drain).
thank you
Runs smooth and without problems or lags with the mx Player pro with the sw decoder. The hw decoder doesn't Work.
i use hw+
along with a custom codec for ac3
Yep custom MX codec canm be found here on XDA forum - use search.
It's up to 1.9.0... Anything older will get an "update codec" message....
I tried but no luck, it works on sw only, what is your phone's model?
mine is G955U Sprint Unlocked. all other codecs work ( even hevc 10-bit 4k ) but h.264 10-bit is only working on sw.
How do you setup the custom codec for AC3 (I recognize I'm being lazy by just asking...but I have a headache...)?
For C0derbear
Put on root directory of phoner or sd card and start MX player. Go to settings, and select "custom codec at bottom of list in decoder settings. Select codec with browser it opens.
That's if it doesn't detect the custom codec and ask to use it.
It will restart to apply codec...