Related
I've seen a few things online with no charging problems. Mine will charge but super slow. Overnight it will only charge to about 73%. Tried battery calibration and still nothing. Any tricks or fixes I don't know about?
Are you using the original charger and cable? You need at least a 2amp charger and the original cable to charge properly.
Transmitted via Bacon
timmaaa said:
Are you using the original charger and cable? You need at least a 2amp charger and the original cable to charge properly.
Transmitted via Bacon
Click to expand...
Click to collapse
He is right. Older chargers are not 2 amp, and so they will charge, but very slowly. You don't have to necessarily use the original cable, or the stock charger. Really any cable will get you fast charging as long as the block that plugs into the wall is a 2 amp. Chargers that will charge tablets usually work. My wife has an LG G3 and the charger for that works as well.
bradleyw801 said:
He is right. Older chargers are not 2 amp, and so they will charge, but very slowly. You don't have to necessarily use the original cable, or the stock charger. Really any cable will get you fast charging as long as the block that plugs into the wall is a 2 amp. Chargers that will charge tablets usually work. My wife has an LG G3 and the charger for that works as well.
Click to expand...
Click to collapse
Totally untrue and very bad, maybe even dangerous, advice...
Use a sub-standard cable with a 2 amp charger and you run a very serious risk of overheating, damaging the phone or charger, and even the risk of an electrical fire.
Always use good quality cables and chargers, and read other people's recommendations as to what are good. Buying a cheap set just to save a few quid could cost you your phone, or much more.
SimonTS said:
Totally untrue and very bad, maybe even dangerous, advice...
Use a sub-standard cable with a 2 amp charger and you run a very serious risk of overheating, damaging the phone or charger, and even the risk of an electrical fire.
Always use good quality cables and chargers, and read other people's recommendations as to what are good. Buying a cheap set just to save a few quid could cost you your phone, or much more.
Click to expand...
Click to collapse
I agree if you buy a cable that ignores safety standards you could cause a fire, but that to me just has to do with being a cheap cable. Here is some information that supports what I am saying:
http://www.extremetech.com/computin...ks-or-how-to-avoid-blowing-up-your-smartphone
To quote that article "USB 1.0 and 2.0 specs, a standard downstream port is capable of delivering up to 500mA (0.5A); in USB 3.0, it moves up to 900mA (0.9A). The charging downstream and dedicated charging ports provide up to 1500mA (1.5A)"
Also, "You can plug any USB device into any USB cable and into any USB port, and nothing will blow up — and in fact, using a more powerful charger should speed up battery charging."
So perhaps I should explain to the person that asked the question, if your cable is more than a few years old, it may still charge slowly. You need it to be at least USB 3.0. But most cables sold in the last few years are USB 3.0.
Using a cheap quality cable, sure, that's always a bad idea no matter what. Using an older cable, the worst that could happen (assuming it's not in poor condition) is that it will only let .5amps through.
I charged mine last night for 7 hours and it only has 22% battery.
I originally bought a One Plus One in February 2015. It broke and I had to go through the extensive RMA process. Since they shipped the replacement phone to me, I have been noticing more and more problems. The latest being the charging. I cannot get it to charge correctly. Since the RMA process took a month (Feb 22 - March 22), I'm very reluctant to do it again. Considering selling this and going back to AT&T. Or at least some company that has phone support/any support.
I plugged it in 5 minutes ago at 7% battery and now its dead.
Jess650 said:
I charged mine last night for 7 hours and it only has 22% battery.
I originally bought a One Plus One in February 2015. It broke and I had to go through the extensive RMA process. Since they shipped the replacement phone to me, I have been noticing more and more problems. The latest being the charging. I cannot get it to charge correctly. Since the RMA process took a month (Feb 22 - March 22), I'm very reluctant to do it again. Considering selling this and going back to AT&T. Or at least some company that has phone support/any support.
I plugged it in 5 minutes ago at 7% battery and now its dead.
Click to expand...
Click to collapse
Are you using the original charger and cable?
Thanks for input guys. I do not have my original charger anymore. My wife's new kitten has made quick work if several chargers. I purchased one yesterday at local Verizon store. 2amp chargers are actually hard to find. So this is what I got. It charges fast again. Charged my phone from 5% to 71% in about 40 minutes. This model actually States 2.1 amp.
A great replacement is the original Blackberry Playbook charger with the non-removeable cable. Almost as fast as my original charger and a sensible price as well.
Install any ROM except the ones based on Omni.. (like the SlimROMs) and flash boeffla kernel. Keep the AC Charging Current up to 2200A. It says it may damage the USB Cable or charger but nothing ever happened to my Galaxy S3 (on the same kernel) or OPO. It charges extremely fast with the original USB cable and charger. Try it! Worked for all my friends!
I just bought iVoler quick charger to try it because the price was low and the reviews said it was quality made. I Just received this the other day, and I plugged in my Z4 Tablet and it said Z4 Tablet detected, so it indeed does support the Qualcomm Quick Charging feature! Charging was fast and held strong with my Z4 Tablet. Charging the battery from 0 to 25% in about 19 minutes. And the 6 foot USB cable is of good quality and really nice. It also fits into my Z4 Tablet with a nice click, and fits well around my case. I will definitely buy more of these!
The great product need to be shared.
http://www.amazon.com/dp/B00WSLRCWI
is safe to use ? I'm just wonder why Sony has not advertised this feature
Well, the Z4 is listed as supporting quick charge on Qualcomm's website: https://www.qualcomm.com/products/snapdragon/tablets/sony-xperia-z4-tablet.
I have tried 2 quick charge chargers from amazon so far with the z4 tablet.
No problems and it works with most recent xperias and other snapdragons.
xbill9 said:
I have tried 2 quick charge chargers from amazon so far with the z4 tablet.
No problems and it works with most recent xperias and other snapdragons.
Click to expand...
Click to collapse
What kind of charging times are you seeing with the quick charge 2.0 with a battery that big? i.e. 80% in x mins from empty etc. I have been searching for an answer to this but it doesn't really seem to be posted in times but percents.
Thanks
themana said:
What kind of charging times are you seeing with the quick charge 2.0 with a battery that big? i.e. 80% in x mins from empty etc. I have been searching for an answer to this but it doesn't really seem to be posted in times but percents.
Thanks
Click to expand...
Click to collapse
3% - 80% 1:45 (h:mm)
3% - 100% 2:45
I used an htc qualcomm 2.0 charger.
Sent from my SGP712 using XDA Free mobile app
I use sony uch10 quick charger and it does 0-100% in about 2 and a half hour.
I've just bought a QualComm Quick Charge 2.0 compatible charger and I get the same charge rate of 2.5 hours to 100%. Used to take me up to 6 hours previously.
I am using the Anker Quick Charge 2.0 and it charges the tablet in about 2 1/2 hours. It is on sale right now for $7.99 with promo code QPPAQPP5. The regular price is $15.99. (LINK HERE)
Awesome info, just bought two chargers using that code. Much Thanks!
ramontomzer said:
Awesome info, just bought two chargers using that code. Much Thanks!
Click to expand...
Click to collapse
You are welcome. It is a great charger. I use it with my LG G4 as well.
So, the Sony charger that comes with the Z4T isn't a Qualcomm Quick Chare 2.0 charger, right? A quick check says 1,5A / 5V and that's also what I measured with a USB gadget. I got the same results with my QC 2.0 charger from Samsung...
I'll try it again with another QC 2.0 charger.
/edit: yeah, the shipped charger isn't QC 2.0. Not sure why my Samsung charger didn't work out though, but I'll test my Pisen QC 2.0 charger tomorrow
HI guys I just test it with my Galaxy S7 / Note 5 quick charger with the tablet USB cable and I'm getting full charge in 1hour 15 min.
Sent from my SGP771 using Tapatalk
So why did Sony put in a slow charger?
E+ is big move from my s4, looks like i need to update my car charger so support e+, can someone help here with your experience with Note or other for fast charging
Thnaks
prashant.saraf said:
E+ is big move from my s4, looks like i need to update my car charger so support e+, can someone help here with your experience with Note or other for fast charging
Thnaks
Click to expand...
Click to collapse
This one is good : [Qualcomm Certified] Tronsmart® Quick Charge 2.0 18W USB Car Charger
Opt among 1 output, 2 output or 3 output. However, please note that only 1 output port supports Qualcomm Quick Charge 2.0. Rest 2 are fast, however, not QC 2.0 Fast.:good:
what is it i need one ?
Check slickdeals. I've been using the $5 one (on sale). It outputs 12v so it charges the phone very fast.
apurva.giri said:
This one is good : [Qualcomm Certified] Tronsmart® Quick Charge 2.0 18W USB Car Charger
Opt among 1 output, 2 output or 3 output. However, please note that only 1 output port supports Qualcomm Quick Charge 2.0. Rest 2 are fast, however, not QC 2.0 Fast.:good:
Click to expand...
Click to collapse
Thanks for that. slick deals is having a promo on this.
However i was wondering s6 edge plus is not qualcomm based, instead exynos.
I was considering this one.
http://www.amazon.com/Aukey-Charger-Adapter-Smallest-Powerful/dp/B00M6QODH2
This is 2.1amp, and is the smallest, it can virtually snap right into your car charger port, without the protruding charger popping out.
MANswers said:
Thanks for that. slick deals is having a promo on this.
However i was wondering s6 edge plus is not qualcomm based, instead exynos.
I was considering this one.
http://www.amazon.com/Aukey-Charger-Adapter-Smallest-Powerful/dp/B00M6QODH2
This is 2.1amp, and is the smallest, it can virtually snap right into your car charger port, without the protruding charger popping out.
Click to expand...
Click to collapse
Technology is same. High Volt, low Ampere. Any QualComm Certified QUick Charger would be compatible with Samsung's Adaptive Fast Charging. Atleast any branded ones, never go for any unheard brands. Usually Tronsmart, Aukey and Anker are good choices in average budget. Here's a video review I did for Tronsmart Adapter (Quick Charge) with my Edge+ :- https://www.youtube.com/watch?v=DR8W9ozZgAs
Also, please note that I have no affiliation with any of these brands, I just received a product for the review from Tronsmart and I found it really good. And I'm sure Aukey and Anker are equally good.:fingers-crossed:
Also, the Car Charger you are considering isn't fast charging compatible. Although it will not take much time with high Amp output (as specified), but its definitely not a fast charger.
Well, I am using CHOETECH’s Dual USB Car Charger with a dedicated port certified by QUALCOMM’s quick charge 2.0 technology so that I can charge my S6 Edge plus at quick charging rate even on the go. The main specialty of this charger is that it is not only charge the fast charging devices but also Apple devices like iPad Air 2 or iPhone 6 plus at much fast rate as compared to their original charger. You can consider to buy this from Amazon: http://www.amazon.com/dp/B00YX7Y3G8/
MANswers said:
Thanks for that. slick deals is having a promo on this.
However i was wondering s6 edge plus is not qualcomm based, instead exynos.
I was considering this one.
http://www.amazon.com/Aukey-Charger-Adapter-Smallest-Powerful/dp/B00M6QODH2
This is 2.1amp, and is the smallest, it can virtually snap right into your car charger port, without the protruding charger popping out.
Click to expand...
Click to collapse
sigma24 said:
Well, I am using CHOETECH’s Dual USB Car Charger with a dedicated port certified by QUALCOMM’s quick charge 2.0 technology so that I can charge my S6 Edge plus at quick charging rate even on the go. The main specialty of this charger is that it is not only charge the fast charging devices but also Apple devices like iPad Air 2 or iPhone 6 plus at much fast rate as compared to their original charger. You can consider to buy this from Amazon: http://www.amazon.com/dp/B00YX7Y3G8/
Click to expand...
Click to collapse
Here's a deal I saw today for CHOETECH :fingers-crossed::-
http://www.androidpolice.com/2015/0...0-certified-4-port-usb-car-charger-on-amazon/
apurva.giri said:
Technology is same. High Volt, low Ampere. Any QualComm Certified QUick Charger would be compatible with Samsung's Adaptive Fast Charging. Atleast any branded ones, never go for any unheard brands. Usually Tronsmart, Aukey and Anker are good choices in average budget. Here's a video review I did for Tronsmart Adapter (Quick Charge) with my Edge+ :- https://www.youtube.com/watch?v=DR8W9ozZgAs
Also, please note that I have no affiliation with any of these brands, I just received a product for the review from Tronsmart and I found it really good. And I'm sure Aukey and Anker are equally good.:fingers-crossed:
Also, the Car Charger you are considering isn't fast charging compatible. Although it will not take much time with high Amp output (as specified), but its definitely not a fast charger.
Click to expand...
Click to collapse
Thats very good info. Charging technology is evolving with the phones, and thats a very positive start.
The day is not very far when we might have multi thousand mah of battery juice and charging becomes a weekend job.
Do you mind taking notes while charghing 20% of battery with both the qualcomm fast charge, and the regular 2.1amp charger.
I've already placed an order for the Aukey 4.8A / 24W Dual USB Car Charger mainly because of the size. I'd really want a charger that can **** plush within the car's charging port.
MANswers said:
Thats very good info. Charging technology is evolving with the phones, and thats a very positive start.
The day is not very far when we might have multi thousand mah of battery juice and charging becomes a weekend job.
Do you mind taking notes while charghing 20% of battery with both the qualcomm fast charge, and the regular 2.1amp charger.
I've already placed an order for the Aukey 4.8A / 24W Dual USB Car Charger mainly because of the size. I'd really want a charger that can **** plush within the car's charging port.
Click to expand...
Click to collapse
Charging isn't a very quantitative process. First 20% of charging would never be same as next 20% of charging. Usually with fast charger, the first 20% would be amazingly fast while the regular 2.1 amp might take upto 1.5 - 2 times the time. Also, assuming two different devices have same sized battery, with the same charger, one might get 70% charged within 30 min while the other can get 80% charged. However, by the end of 100%, both might take similar time. Thats why, the % readings aren't very consistent or dependable. Its approximation. With 2.1 Amp charger, you won't loose much time, trust me. Also, I don't have the facts, but I have noticed that when I do the fast charging, battery drains out marginally quicker than when I charge through regular 2 Amp charger. Hope that helps.. :fingers-crossed:
apurva.giri said:
Charging isn't a very quantitative process. First 20% of charging would never be same as next 20% of charging. Usually with fast charger, the first 20% would be amazingly fast while the regular 2.1 amp might take upto 1.5 - 2 times the time. Also, assuming two different devices have same sized battery, with the same charger, one might get 70% charged within 30 min while the other can get 80% charged. However, by the end of 100%, both might take similar time. Thats why, the % readings aren't very consistent or dependable. Its approximation. With 2.1 Amp charger, you won't loose much time, trust me. Also, I don't have the facts, but I have noticed that when I do the fast charging, battery drains out marginally quicker than when I charge through regular 2 Amp charger. Hope that helps.. :fingers-crossed:
Click to expand...
Click to collapse
Thanks that was good info. I've received my 2.1Amp Aukey charger.
I tried it yst evening while commuting back home from work, which is about 20min drive, and the phone was at at 50%, and it was able to charge about 30% in less than 30 mins. Looks promising. I love the form factor. you cannot evne see the charger plugged into the car port. Best of all, the car port's cover covers the entire charger when not charging, this way i dont even have to remove the charger jack every time i have to charge the car, just pluck out the wires, and snap the cover back to conseal the charger.
MANswers said:
Thanks that was good info. I've received my 2.1Amp Aukey charger.
I tried it yst evening while commuting back home from work, which is about 20min drive, and the phone was at at 50%, and it was able to charge about 30% in less than 30 mins. Looks promising. I love the form factor. you cannot evne see the charger plugged into the car port. Best of all, the car port's cover covers the entire charger when not charging, this way i dont even have to remove the charger jack every time i have to charge the car, just pluck out the wires, and snap the cover back to conseal the charger.
Click to expand...
Click to collapse
That's nice.. :good::good: No wonder Aukey has made its name so quickly!
dont need it lol
once charged my phone can be good for 3 days dont need it lol
ruchisharma91 said:
once charged my phone can be good for 3 days dont need it lol
Click to expand...
Click to collapse
With constant gaming and videos watching (after working hours ofcs ), mine doesn't stay beyond a day. I'm very happy with that though. I have seen significant different in battery life when I keep the power saving mode on and it doesn't really impacts my gaming at all even though it says that power saving switches to the 1.5 ghz cores and stays that way...!
It doesn’t matter a lot but yeah the main thing is internal circuit and the premium component used in the manufacturing. All of the chargers integrated with Qualcomm Quick Charge 2.0 chip inside. But the best components used in the manufacturing plays a vital role. I can trust CHOETECH more in this area as they are offering 18 months warranty, which means they are confident about what they produce or deliver to their consumers.
An answer in Lenovo's support forums says the G5 does not support Turbo Power, but it comes with a 10W rapid charger. The problem that here in Brazil not even this 10w charger gets shlpped with the phone, neither can I find it for sale, so I'm thinking about getting a 15W Turbo Power charger, does anyone knows if it'll charge the G5 (25W and above are reportedly not working with the G5)
It won't work, But you'll get fast charge tho (NOT TurboCharge, which is even faster. Just standart fast charge)
Randonio said:
It won't work, But you'll get fast charge tho (NOT TurboCharge, which is even faster. Just standart fast charge)
Click to expand...
Click to collapse
Will fast charge charpe it faster than a 5V-2A charger?
freeZbies said:
Will fast charge charpe it faster than a 5V-2A charger?
Click to expand...
Click to collapse
Maybe? I'll test it, and say the results
Randonio said:
Maybe? I'll test it, and say the results
Click to expand...
Click to collapse
Ok, if you do it, that'll hilp a lot, since moto G5 came with this standard 2A charges.
I bought my Moto G5 in Brazil near the launch date, it did come with the 10 W charger (5V-2A, W = V x A, do the math). As far as I know, Snapdragon 430 support Quick Charge 3.0. I bought a ROCK charger with Quick Charge 3.0, just waiting for it to arrive from Aliexpress, should work just fine.
Sephirothrx7 said:
I bought my Moto G5 in Brazil near the launch date, it did come with the 10 W charger (5V-2A, W = V x A, do the math). As far as I know, Snapdragon 430 support Quick Charge 3.0. I bought a ROCK charger with Quick Charge 3.0, just waiting for it to arrive from Aliexpress, should work just fine.
Click to expand...
Click to collapse
Well, I didn't know that this would result in 10W. Anyways, as far as I know the moto G5 doesn't support Turbo/Quick charge, despite using the Snapdragon 430. I say thay because none of the TurboPower chargers in Motorola's website cites the G5 as supported (only G5+/G5S), in addition, I read many reports in Lenovo's official forum repporting it doesn't support Quick/Turbo Charge, like here: https://forums.lenovo.com/t5/Moto-G...g-with-Qualcomm-quick-charge-3-0/td-p/3828209
In other words, a 15W charger is not supposed to provide great advantages over the regular charger that came with it.
Anyways, thanks for showing me a 5v-2a equals 10w, I googled and confirmed it.
freeZbies said:
Well, I didn't know that this would result in 10W. Anyways, as far as I know the moto G5 doesn't support Turbo/Quick charge, despite using the Snapdragon 430. I say thay because none of the TurboPower chargers in Motorola's website cites the G5 as supported (only G5+/G5S), in addition, I read many reports in Lenovo's official forum repporting it doesn't support Quick/Turbo Charge, like here: https://forums.lenovo.com/t5/Moto-G...g-with-Qualcomm-quick-charge-3-0/td-p/3828209
In other words, a 15W charger is not supposed to provide great advantages over the regular charger that came with it.
Anyways, thanks for showing me a 5v-2a equals 10w, I googled and confirmed it.
Click to expand...
Click to collapse
You are welcome.
To be honest I have been using the Quick Charger but can confirm if it's working or not. I usually just plug the phone before going to sleep, when I wake up it's already 100% . I will search if there's anything available to detect if it's using the quick charge or not.
Did it work?
I'm using my wife's charger from her G4+ and it seems not boost the charger at all. It takes the same time with my own charger. Normally, batteries got a regulator that protect the battery from being overpowered and, maybe, exploded. So, if it was setted to 2A max it won't work anyway. Also, the official charger detects, through USB interface, if the device support Boosted Charging before sending 3A. If you wanna save your money, my advice is don't buy it.
Moto G5 doesn't support Qualcomm 2.0 or 3.0 which charge at 9V or 12V. My original charger used to charge at 5.2V and up to 1.5A, but it doesn't anymore, now doesn't go over 5.0V. Very difficult to charge when powered on when normal charger only manages about 0.6A . Also have problem with portable battery packs, best option is to connect external battery when full, and it just about stops internal battery falling. Maybe the connector wearing out, have tried different cables....
mstombs said:
Moto G5 doesn't support Qualcomm 2.0 or 3.0 which charge at 9V or 12V. My original charger used to charge at 5.2V and up to 1.5A, but it doesn't anymore, now doesn't go over 5.0V. Very difficult to charge when powered on when normal charger only manages about 0.6A . Also have problem with portable battery packs, best option is to connect external battery when full, and it just about stops internal battery falling. Maybe the connector wearing out, have tried different cables....
Click to expand...
Click to collapse
Sometimes it can be as simple as a tiny piece of pocket lint/crud in the USB charging port. You can buy cans of compressed air to blow them out same as used on Camera lens or check with magnifying glass and then a toothpick with care to clean anything found out.
HTH
Blast from past on old phone! The usb port eventually failed completely, fortunately the little board is easy to replace, but the replacement board only lasted a few months. I still have the phone as a spare and charge the removable battery out of the phone.
mstombs said:
Blast from past on old phone! The usb port eventually failed completely, fortunately the little board is easy to replace, but the replacement board only lasted a few months. I still have the phone as a spare and charge the removable battery out of the phone.
Click to expand...
Click to collapse
Sorry about that
But glad you still have the phone
I have the Samsung Note 4. Like the OP6, it has a proprietary "quick charge" mode, but I find it will also charge quite fast when provided with a non-Quick Charge source such as a battery that can source several amps of current.
How fast does the OP6 charge without the Dash charger and cable? (in terms of amps drawn from source?)
Like it would take years like why would you want to know this, if you broke your charger buy another and look after it like. It's one of the main features of the phone and they don't talk about how fast it charges like
At work i use a QC3.0 charger for my OP6. Didn't notice a great difference to the DASH charger at home. Maybe DASH is a few minutes faster.
40% to 70% charge with QC3.0 is still insanely fast.
Stay on topic guys. OP asked a question, which could be answered with facts, rather than opinions and scenarios. In my regular car charger, I go from 22 to about 70 in 40 minutes, if I can recall correctly.
ItsLaggyY said:
Like it would take years like why would you want to know this, if you broke your charger buy another and look after it like. It's one of the main features of the phone and they don't talk about how fast it charges like
Click to expand...
Click to collapse
I'm not sure if you're serious or sarcastic, but In case of the former, here are a few reasons why someone might be interested in charging with other than the Dash Charger:
1) AFAIK, Dash is available in AC mains or 12V Car charger versions. I often use a 20K mAH Anker powerbank battery for charging. That is usually in situations where other power is not available, but a quick charge is needed. Huge current is available, but would the OP6 use it?
2) I use a compact travel charger that has 5 USB charging ports. Using a Dash charger would require carrying another charger (big, bulky, without retractable prongs), and occupying one (or more due to the shape) additional AC outlets.
3) I have a phone charger in my bedroom, at my desk, in my travel bag (both AC and Car style), and in my car. A quick check on Amazon seems to indicate that the Oneplus6 charger is several times more expensive than other "quick charge" chargers. Over multiple charger locations, the extra costs add up.
Using the word "like" so many times makes it difficult to understand the post.
dwj said:
Using the word "like" so many times makes it difficult to understand the post.
Click to expand...
Click to collapse
I'm Irish, apology
I have a stockpile of fast chargers that used the weird Nexus standard (5V, 3A, non QC) and they're okay, and for overnight or at my desk at work that's plenty fast to get the job done. The phone shows them as "charging" and not "charging slowly."
I purchased a "Tinduqin oneplus5T charger" from Amazon that works and looks exactly the same as the original dash charger for about $20, but it seems to already be sold out.
If you don't use dash charger,you only can charge at 5v 1.5a,I have tested it with apple 45w pd charger,xiaomi qc3.0 and nexus 5v3a charger
timg11 said:
I have the Samsung Note 4. Like the OP6, it has a proprietary "quick charge" mode, but I find it will also charge quite fast when provided with a anon-Quick Charge source such as a battery that can source several amps of current.
How fast does the OP6 charge without the Dash charger and cable? (in terms of amps drawn from source?)
Click to expand...
Click to collapse
It won't charge very fast because it doesn't use any on board quick charge it's all in the dash charging brick
I have a bunch quick chargers 3.0 at home. It takes a life time. I end up buying the dash charger. I still use the quick charger for over night charging
there must be some sort of software restrictions on oneplus6 since measures show that oneplus6 cannot be charged with more than 5V-1.5A.
x111 said:
there must be some sort of software restrictions on oneplus6 since measures show that oneplus6 cannot be charged with more than 5V-1.5A.
Click to expand...
Click to collapse
Do you own the OP6? Do you have a USB power meter that could measure the charging current with and without the Dash charger and reply with the values?
On my Note 4, it charges at about 1.17A / 5 V when the screen is on, and the current goes up to 1.6A with the screen off. That is with either a QC2 Quick Charger or a battery power pack. The phone reports "quick charger connected" in both cases.
oneplus6 has 85% battery left, measured with usb voltmeter and original oneplus dash charger 5V-4A, it shows that oneplus6 is dawning 5V-1.3A and same thing is happening with other usb chargers capable to deliver over 5V-2A.
I guess oneplus6 should be discharged less than 50% or something in order to start receiving over 5V-3A
1N1ghth4wk said:
At work i use a QC3.0 charger for my OP6. Didn't notice a great difference to the DASH charger at home. Maybe DASH is a few minutes faster.
40% to 70% charge with QC3.0 is still insanely fast.
Click to expand...
Click to collapse
Is it possible to use a the original DASH-adapter but with another USB-C cable? I need a longer cable so I can use the phone whilwe charging.
OnePlus has a original cable for sale which is only 150cm Long.
My question is if I can buy any other manufacturers cable whish also support some sort of fast charging. I've heard for example that DASH-charging is the same charging model that Huawei P20 Pro uses, they just have different name. .
So, is there anyone here that has switched the OP original cable and charge it up with a cable from another manufacturer?
There has to be a solution to this. Me myself can't. be the only one that needs s longer cable.
x111 said:
oneplus6 has 85% battery left, measured with usb voltmeter and original oneplus dash charger 5V-4A, it shows that oneplus6 is dawning 5V-1.3A and same thing is happening with other usb chargers capable to deliver over 5V-2A.
I guess oneplus6 should be discharged less than 50% or something in order to start receiving over 5V-3A
Click to expand...
Click to collapse
That's normal. Phones pull the most amps when on low battery, then progressively less as they are charged.
Check how much it pulls on <40% and <80% respectively.
Well, I charged my Op6 with a no-name USB 3.0 charger yesterday (forgot my dash charger at home, I was by a friend) and from 3% to 100% it took about ~1 hour and 55 minutes.
Not that bad I guess. But I still prefer my dash charger
I'm using a huawei p20 pro charger atm. Phone states from 75 - 100 it will take 33 minutes. (prob a bit faster if I don't use the phone.
Here is a charging session with a Oneplus 2 charger without quick charge
Charging from 27% to 100% in 2 hrs, 40 min - avg. Charging speed: about 1000 mA/h
Hello,
I'm using this old thread since we're talking about the same thing.
Is there a kernel or rom for the OP6 that enables to draw as much current as possible form third party chargers? It's sad that it's stuck at 1.5A no matter the charger unless you use dash charger. 2A is already something, 3A would be awesome.
Of course only if this a software limit.