Related
Welp, tried to root the Nexus S 4g.
On rebooting, it gets stuck at the Nexus S bootscreen, pauses, keeps going, etc.
Got CWM 3.0.0.5, and can fastboot, get into CWMRecovery.
From there, I'm at a loss. Tried to restore Nandroid backup, but it says a whole bunch of stuff, basically saying E: failed to find "cache" partition, Can't mount /cache/recovery/last_log, etc.
Tried to apply zip from CWM backup, it says "No files found."
Tried going into mounts/storage to mount USB storage, but nothing appears on desktop of either Mac or PC, so I can't get move files onto the SD card.
Now, when I just power up, it just says "Google," and there's a unlock icon at the bottom. Nothing else.
Anyone have any solutions?
Yeah stop using that old version. Of ClockworkMod recovery
Seriously use 3.0.2.4. Its in the clockwork thread in the dev section.
Sent from my Nexus S using XDA App
Would if I could, but I can't get anything on the SD card!
Trying to mount USB storage from CWM-- no drive shows up on Mac or PC for me to move stuff onto it.
Boot into fastboot by turning off phone, turn back on while holding volume rocker up. Leave it at the screen where you could select reboot, recovery etc. Download the above mentioned clockwork recovery image from the thread to your computer. Flash using fastboot command. No need to copy anything to SD card.
Sent from my Nexus S using XDA App
Having the exact same issue. Nothing appears in the nandroid folder now either after replacing the recovery image with 3.0.2.4 and I can't mount the USB storage or get anything onto the SD card. Phone won't boot. Unsure of the folder structure on this phone to try pushing a file with adb or fastboot.
Same issues here. I was able to flash CWM recovery 3.0.2.4, but when I go to "mounts and storage" and "mount USB storage", I the drive does not appear on both Mac and PC. I'd like to transfer the stock NS4G image onto the phone so I can install the zip from the sdcard...
When I try to use the command, "adb push", it can't find the SD card.
Same problem
I flashed it , and since then i cannot mount the device , i have a good image to push but the device is not opening up the storage for me to push the image.
I had the same problem. Got it all fixed up.
peabody42 said:
Welp, tried to root the Nexus S 4g.
On rebooting, it gets stuck at the Nexus S bootscreen, pauses, keeps going, etc.
Got CWM 3.0.0.5, and can fastboot, get into CWMRecovery.
From there, I'm at a loss. Tried to restore Nandroid backup, but it says a whole bunch of stuff, basically saying E: failed to find "cache" partition, Can't mount /cache/recovery/last_log, etc.
Tried to apply zip from CWM backup, it says "No files found."
Tried going into mounts/storage to mount USB storage, but nothing appears on desktop of either Mac or PC, so I can't get move files onto the SD card.
Now, when I just power up, it just says "Google," and there's a unlock icon at the bottom. Nothing else.
Anyone have any solutions?
Click to expand...
Click to collapse
I had the same problem this morning:
I posted a workaround that worked well for me in Post #35
http://forum.xda-developers.com/showthread.php?t=1072698&page=4
If it works for you click 'Thanks'
Figured it out
Alright , this is what i did to fix the problem, i booted up the system with the bad image i had, connected to wifi and downloaded the Nexus S 4G deoxed image that is out there directly from the internet to the phone. Then i moved it from the download folder to the root using file manager.
I rebooted into recovery and was able to wipe and then flash the recovery image and reboot. Once i rebooted i regained control over the usb and memory card. hope it helps you guys.
How Do I Fix "REALLY" Bricked and DEAD Nexus S4g?
All posts on this thread presuppose a working Nexus S 4g. When I use the term bricked, I mean dead. About a month ago I followed directions on one of these threads on how to easily and with one click route my jellybean running phone. For some reason the process never completed, and all I was able to accomplish was unlocking the phone. When I ran the check to see if it was truly rooted, the response showed the phone was still unrooted. About 30 days later it was deader than a brick. Somewhere I read that Jellybean on Sprint might be the culprit. Anyway, I have a dead phone. Sprint wouldn't even check it because the screen was cracked. Fortunately, I bought a new one, new to me anyway, on eBay for $37. It is still running android 2.3.7(Gingerbread), and the phone is attempting to push the Ice Cream Sandwich update. I am fighting the update until I figure out what killed my phone.
Just wondering whether there is anything I can do with my old phone, even if I only use it like an old iTouch for music and surfing via Wi-Fi. Anyone?
I attempted the one click method described here, but my desktop cannot find any devices. So it truly is dead. Comments appreciated. I have used several different cables, unsuccessfully.
sexynexy said:
All posts on this thread presuppose a working Nexus S 4g. When I use the term bricked, I mean dead. About a month ago I followed directions on one of these threads on how to easily and with one click route my jellybean running phone. For some reason the process never completed, and all I was able to accomplish was unlocking the phone. When I ran the check to see if it was truly rooted, the response showed the phone was still unrooted. About 30 days later it was deader than a brick. Somewhere I read that Jellybean on Sprint might be the culprit. Anyway, I have a dead phone. Sprint wouldn't even check it because the screen was cracked. Fortunately, I bought a new one, new to me anyway, on eBay for $37. It is still running android 2.3.7(Gingerbread), and the phone is attempting to push the Ice Cream Sandwich update. I am fighting the update until I figure out what killed my phone.
Just wondering whether there is anything I can do with my old phone, even if I only use it like an old iTouch for music and surfing via Wi-Fi. Anyone?
I attempted the one click method described here, but my desktop cannot find any devices. So it truly is dead. Comments appreciated. I have used several different cables, unsuccessfully.
Click to expand...
Click to collapse
Hi,
What method did u use to root? What thread? Cuz it may need to newest version of the recovery.
anyways...
Try charging up a battery on newer phone and put in dead phone... but instead if turning on normally, boot into recovery.
If it worked then use a back up to flash it back to stock. Assuming u were able to back it up b4 root.
If not plug into computer. See if it turns on or can go into either recovery or boat loader mode and if so perhaps computer will recognize it.
Vs Nexus S4G using tapatalk2
Yesterday my phone started acting up. All running process crashed and not many was able to start. I had to constantly click "force close". I think this started after I installed the Google+ app, but not sure.
I have tried uninstalling all unnecessary apps, without luck. I then tried wiping to factory settings by using the Android menu, but without any changing. I then tried by holding vol+ and power, going in to recovery and wiping both to factory and app cache. This doesn't change anything either. By googling I can see some suggests to hold vol- and power, to get to a another wiping-functionality but this just boots my Nexus S to normal state - no menu appears.
Has anybody an idea of what I can do?
Edit: more info; if I click "Report" and investigate the message sent to Google, I see that error has something to do with SQLite-relatet classes. Which makes some sense, alot of my changes are reset each time the phone is rebooted. For instance did I miss a call a couple of hours before the phone went crazy - this is shown at each boot in the notification area eventhough I clear the area and/or goes to missed call section
Factory reset via menu does delete all your "custom" apps, so I'd say it's not one of the existing apps causing problems.
The way you describe function after your factory reset sounds like factory reset didn't work properly.
If you feel safe I'd recommend rather flashing 2.3.4 again using either Odin or the OTA zip from Google (requires open bootloader).
I think you're right that factory reset doesn't do what is expected. Once I click it, the phone reboots and shows the Android guy next to an unwrapping package. This lasts only 2 seconds, then it reboots itself again and goes into normal phone mode (where all the app-crashing starts again).
I have not flashed or rooted my phone before, but I will consider this now since my NS is pretty much a brick. Thank you for your swiftly response.
Edit: Shouldn't I get a menu, when I push and hold vol- button, while turning on the device? Right now it just boot as normal.
Before you use odin....try going into rom manager a reflashing clockwork! Ive had that android dude on my screeen but reflashibg via rom manager always fixed it. Try that
Sent from my Nexus S using XDA Premium App
Wow my Nexus has totally shut me out.
I cannot use ClockworkMod unfortunately since I am not able to root my phone. It is not detectable via USA (when I use vol+/pwr and connect USB). I am unable to check the USB Debugging option on the phone. Each time I check it, go to home-screen and back to the menu, it has de-selected it again. Also I noticed when I read the info that is sent to Google for all those app-crashes I get, I see SQLiteException and error in an SQLite.java file. So it seems like some database layer is broken.
I read one could copy the ClockWork.img to my phone and use the standard recovery option to flash the img (I think). But when I go into the recovery menu, the file is gone. When I boot the phone again, it has deleted the .img file - eventhough if I copy it to several different folders, they are all gone :-(.
I feel pretty screwed at the moment. How can I else wipe all data?
I'd recommend to check if your device is correctly identified in windows. Missing USB drivers might cause problems. Get the latest drivers and a guide from here.
If you succeed booting into fastboot properly (vol up and power) you can follow this guide. Get the latest cwm recovery.img here.
Last option would be to boot into download mode (vol up + vol down + power + plugging in usb cable) and use Odin from samfirmware.com
--
All options require correctly working USB drivers.
I managed to unlock the bootloader, by quickly turning on USB-debugging (before any processes started to crash) and install the drivers from this post:
http://forum.xda-developers.com/showpost.php?p=6819751&postcount=4
A reboot later, I got this message:
"System UIDs Inconsistent
UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable."
Right below was a button saying "Im feeling lucky" (??)
I installed ClockworkMod using fastboot and tried "Fixing permissions" with no luck. I will try some ROM later on, and hope it will bring my phone back
Normally this error happens when you have a faulty app ruining your system, formating/deleting whole sdcard does usually fix this.
rentaric said:
Normally this error happens when you have a faulty app ruining your system, formating/deleting whole sdcard does usually fix this.
Click to expand...
Click to collapse
I can safely mount USB-storage and format the whole bunch?
I been sweating over this stupid issue all day now, all I want is a fac-reset :´(
Edit: "format /sdcard" using CWM didn't do anything
DennisRP said:
I can safely mount USB-storage and format the whole bunch?
I been sweating over this stupid issue all day now, all I want is a fac-reset :´(
Edit: "format /sdcard" using CWM didn't do anything
Click to expand...
Click to collapse
See I'm no expert on this whole thing. At this point I'd just flash a whole new system via Odin. Prolly not the smartest or safest option, but that's what I'd do because I don't know better. If that wouldn't fix it either, I'd return the phone on warranty
I was looking at Odin from the start, since nothing else seemed to be working.
So right now I got started on Odin. Followed the .pdf steps and flashed the bootloader at first succesfully. I was asked to remove the battery and re-connect my NS. Began downloading "pda" and "phone", but at around 10% a big fat red "fail" message appeared and now I just see the Google-logo on startup. I still cant flash any roms via fastboot.
Im too tired too right now, been working with this for 14 hours straight. I will look at it tomorrow evening. Thanks for your help rentaric
Weird, you're not the first one who had trouble running Odin using their guide.
Overall it's pretty simple.
Enter download mode. Vol up vol down and power at the same time while plugging in the USB cable. Start Odin, should show a yellow colored box with a port number. Uncheck everything but reset timer and auto reboot. Unzip the correct zip file from samfirmware.com (check if you got i9020 or i9023 and get the universal Odin exe), apply file from the folder accordingly. Bootloader and bootloader. Phone and modem. Pda and pda. Csc can remain empty (will change carrier info in fastboot).
Double check md5 hash to avoid broken files.
Sent from my Nexus S using XDA App
rentaric said:
Weird, you're not the first one who had trouble running Odin using their guide.
Click to expand...
Click to collapse
Of course I did not go to bed, how should I be able to sleep with a broken phone .
The firmware suggested on samfirmware.com for my phone, was 2.3.3 and some other version (my phone was 2.3.4.2/GRJ22 or something similar, I suspect that might be the cause. Also I unchecked everything, that might also have been of importance). The flash will always fail when everything was downloaded - it then said something about "remote" and "Loke" and then fail. But as I mentioned, I had succesfully flashed boot.img (2.3.3) thus no boot occured now. I googled the correct bootloader, used fastboot and was booting succesfully again.
I began looking more into the sdcard, as error-messages was leading me this way. To compress 4 hours of investigations into a few lines, it seems as my PBA is malfunctioning as other xda-members have experinced. Only solution is sending the phone to Samsung for a PBA replacement. I purchased the phone in Bestbuy USA and the danish Samsung partners are not too joyfull about this - I will contact Samsung and hope they can help me.
I experinced the exact same thing as this poor guy - http://forum.xda-developers.com/showthread.php?t=993403
Every thing you try to do to /sdcard is worthless.
Formatting (USB/using CWM/using adb shell linux commands) says "Succes" but nothing happens.
Copying files says "Succes" but nothing happens. If I boot phone into CWM, mount usb and upload new rom/apk/whatever and try to do a "install update.zip" it fails with some mounting errors.
Im ready to go cry in a corner - I really want this to be fixable via software, but I probably have to realize that this is a hardware issue.
Apparently Samsung doesn't offer worldwide warranty for cellularphones :´(. God it sucks to pay repair-expenses on a 1 month old mobile.
Hello, so it looks like i screwed up here and got ripped of on ebay. I bought a nexus i9020t for a friend at work to bring back to india.
The seller said it had a rom install badly on it, but it could still get into the bootloader. He claimed with some effort it was likely fixable..which me and 33 other bidders agreed (*dumb move*)
Unfortunately with some further research I think this phone is having the eemc problem where it can't read its internal memory. It is stuck on the google boot screen, but bootload is accessible. When i go to look in the sdcard from recovery, it can't mount it.
"Fastboot oem unlock" won't work and from what i read, its because its trying to wipe the internal memory..but it can't access it, it freezes and when i boot back into bootloader its still locked. Also the phone boots into android every once in a blue moon, like after 20 battery pulls it will boot into 2.3.4. I've tried Wugs tool to try unlock to no avail, driver setup checks out according to the UI.
I need to unlock the bootloader to do anything, i even need to unlock bootloader to put on clockwork mod. Anyone know of a .zip package that will install clockworkmod, so i don't have to do "fastboot flash recovery recovery-clockwork-5.0.2.0-crespo.img" because that requires unlock.
Also i'm having trouble seeing the point to all this because even if I get the bootloader unlocked thats not going to help a hardward problem.
The fact it boots into 2.3.4 on ocassion indicates to me that its freezing at boot because the internal memory..i mean if there was no rom on there it would never load jack.
So other than my clockworkmod .zip install question, anyone know if the internal sd card can be replaced? I mean ill go in there if its an actual sd card and not attached to the board or something. Need some guidence here, I see the problem around, but is there reall a solution so this?
Have you tried flashing with odin ? Mabey tick the repartition option.
Sent from my Nexus S using xda app-developers app
Yea I will do that this afternoon, also I will try using the PA drivers and Wugs tool on another machine.
I'm not sure but you could try to root the phone with the gingerbreak exploit over an adb shell. After doing this you could install ROM manager and flash cwm. The ROM manager app doesn't need an unlocked boot loader. It just needs root permissions.
After doing this you should be able to boot into cwm.. BUT I don't how it could help you with your hardware problems.
Sent from my Nexus S using xda premium
I'd get a refund. If it boots once in a blue moon, something isn't right hardware wise. It either boots or never boots, not "when it feels like it".
Yea idk i hoped the guy had just super effed up the software.
Now where i'm at is i got the bootloader unlocked using the fastboot command, i had to try serveral times, but it worked eventually.
Now i need to load something or do something that will alow me to repartition system.
Basically once bootloader was unlocked i used wugs tool to "flash stock + unroot" from "can't boot" status. It worked on recovery, bootloader ect..alle the way up until it tried to write the system, and gave an error "write failed (unable to remote write)" or something like that.
So now i'm basically tyring to get the "sabra root toolkit.zip" on the device so that i can use clockwork to partion the /system. Or some other way of partiioning /system.
But i'm having difficulty pushing files to the device because wugs tool is expecting you to be booted with usb developing on, and i can't boot.
I've tried "pushing files", and "installing .zip packages from my machine" under wugs tool, and it fails every time because adb device not found, and i think its because i'm not fully booted.
Still recommending a refund. This isn't easy to fix, it's actually not fixable by commoners.
Okiedoke here's the update, I got this puppy working. Just as I did with the "fastboot eom unlock" command, I just kept trying the wugfresh "flash stock + unroot" with the "can't boot" option checked. Several times it failed when trying to write to /system, eventually I tried and it worked. Now I havnt had a boot go bad since the fix (knock on wood) and its running jelly bean.
As for the troubles couple things I noticed
1. I don't think ABD works unless you're fully booted and you have USB debugging on.
As a result not much of wugfresh's options work, only the fastboot ones do.
So the "can't boot" option only uses fastboot so it works while in bootloader.
While the unlock option won't work, because it's trying to use ABD in the beginning.
In fact the only option that doesn't use ABD that I can think of is the cant boot.
So if youre locked like I was, you need to use the command line.
2. I think the problem was the rom the guy had on before had a full blown bad flash.
The /system and I think the bootloader was messed up as well.
Luckily sometimes the device could communicate with its storage, but most of the time it couldn't.
3. Getting the drivers right is a total pain, sometimes one set of driver will work for one thing, and fail for others.
I used two laptops and switched back and forth messing with the 3 available driver settings in wugfresh.
For my problem the pnet drivers are not an option...because you have to be booted to install them, so I just switched between signed and raw. Also the USB ports you use deffidently matter so switch between those as well, if using a desktop use only the back ports.
Here are the steps I took, unfortunately they weren't precise so I can't really say what did it.
1. Download wugfresh, do the raw driver install (if you can use another machine and do the signed driver install).
2. Download the adroid sdk.zip, and extract it.
3. Use command line and go to the tools folder in the adroid sdk folder (I forget exact path, but it's the tools folder somewhere in the extracted folder).
4. Now type "fastboot oem unlock".
5. If fastboot is working right you should get the unlock screen, choose yes.
6. Mine froze here and I had to try several times until it worked..switch back and forth between the 2 comps if you have that option.
7. Once unlocked do the wugfresh "flash stock + unroot" with the "can't boot" option checked.
8. It may fail, but again switch back and forth between machines, and USB ports, if it works then you should be good to go.
One thing I noticed is that recovery showed it couldn't mount my sdcard, but after option 7, and it failed to write the /system, my bootloader changed to a more up to date version (android laying down) and it was able to see the sdcard (which shows me the recovery/bootloader where kinda screwed up in the first place). After I tried again after that maybe 1 or 2 times writing system was successful.
Thanks for all your help I'll click thanks on all you guys.
NS4G
Will boot to fastboot and recovery
CWMR Touch 6.0.1.0
Situation:
My device started bootlooping after about a week of random restarts and freezes. I had just flashed BlackBean and now this, so I decided I was just going to flash a new ROM/Kernel combo. I remembered someone saying I should format /system to install the specific ROM, but I'm fairly sure I formatted /boot along with it, like an idiot. FYI - Fast Charge and a build.prop tweak to set permissions on boot was enabled when this happened. So then I try and flash a new ROM/Kernel combo to fix my bootloop and it wouldn't read the sdcard afterwards. Now it boots straight to fastboot everytime. Toolkit seems to be able to do some things via USB control like reboot the bootloader, but it does not detect an ADB device when I run the driver check or try to restore my CWM backup. I ran the stock+unroot option in Toolkit (was going to send it in thinking the sdcard thing was hardware at first) and it seemed to have went through the whole process correctly... Until the end when it did not reboot automatically like it should have. After doing this, I now get "STANDARD_SET_CONFIGURATION" on the phone when I insert the USB cord while in fastboot. It did not do this before, whether it is the new cord or the flash I do not know. My old cord WAS having problems with data though.
Problem:
I now have no USB debug or SDcard functionality. I assume because of missing files on /boot. I can mount nothing (except cache, but the PC doesn't recognize) without getting a "can't mount" error. This puts a serious dent in my novice ability to fix it. Anything in Toolkit that runs via ADB commands doesn't seem to work properly because it says the device is not in debug mode. PDAnet USB Drivers seemed to install without a hitch and device is recognized on my PC.
Errors:
When trying to mount ANYTHING except the cache while in CWM, I only get: "E:/ Can't mount /sdcard/".
If I try to mount USB storage I get: "E:/ Unable to write to ums lunfile (No such file or directory)Error mounting /sdcard!"
If I try to run any one click methods that use ADB I get: "Daemon not running* No ADB device detected. Make sure you have debugging enabled on your phone"
The log in CWM recovery always shows: "I: Set boot command "" failed to open /sys/class/android_usb/android0/state: No such file or directory" over and over (as many times as I tried to mount something while in recovery for that session)
Questions:
Do you think USB Fast Charge or having the build.prop tweaks enabled could have done something to USB debug? Is there a way to at least just fix the USB Debug problem? Am I correct in assuming that wiping the /system along with the /boot folder is what caused me to not be able to mount the /sdcard to flash another ROM? Is there a way to push the files I need onto the device to restore sdcard function and flash another zip?
Also, what fastboot do I need to be in to do the StockROM+Unroot method in the Toolkit? I have two. Only hold Vol Up/Power takes me to "FASTBOOT". Holding both Volumes+Power puts me into "FASTBOOT - NO BOOT OR RECOVERY IMG"
What is the difference?
I only ask because the Toolkit wants me to hold both volumes and up to get into bootloader mode, but they describe a big green "Start" with an android lying on it's back, mine does not look like that. It simply looks like regular fastboot, but says "FASTBOOT - NO BOOT OR RECOVERY IMG" instead.
It seems you messed with the ROM zip with some tool. Sorry could read your lengthy post completely.
I just want to know one thing clearly, what is the problem basically? where are you stuck?
Edit - Made it as concise as I could, hope it helps. Sorry for length.
Basically, the phone has a formatted /boot, /data, /sdcard, /system, dalvik cache, and I can't seem to use any of the flashing tools via Toolkit in Fastboot mode because the Toolkit says it "cannot find ADB device" please enable "debug" mode. Even when I run the driver check, it says ADB Device Not Found. Though I do have some control of the device via USB (I can use Toolkit to soft reboot from the bootloader) telling me my drivers are probably OK? I couldn't flash any ROM zips (or anything, even backups on the device) because I lost /sdcard functionality.
After a bunch of reading last night, it seems I want to Push a backup of /system and /boot onto the device, which should then restore USB functionality and allow me to flash a ROM... Right?
DizturbedOne said:
Edit - Made it as concise as I could, hope it helps. Sorry for length.
Basically, the phone has a formatted /boot, /data, /sdcard, /system, dalvik cache, and I can't seem to use any of the flashing tools via Toolkit in Fastboot mode because the Toolkit says it "cannot find ADB device" please enable "debug" mode. Even when I run the driver check, it says ADB Device Not Found. Though I do have some control of the device via USB (I can use Toolkit to soft reboot from the bootloader) telling me my drivers are probably OK? I couldn't flash any ROM zips (or anything, even backups on the device) because I lost /sdcard functionality.
After a bunch of reading last night, it seems I want to Push a backup of /system and /boot onto the device, which should then restore USB functionality and allow me to flash a ROM... Right?
Click to expand...
Click to collapse
Your storage memory is completely inaccessible?
Yes, no way to access it via CWM. ADB stuff does not work either. It seems Fastboot stuff DOES. I would like to find a boot.img and system.img to flash via Toolkit (I believe toolkit uses fastboot or odin for these) to see if that would work for me. Any ideas?
It seems like the easy nature of unlocking, rooting, and customizing this phone leads to less of these kind of discussions, I can usually find many files and discussions pertaining to this for HTC phones, but never for this phone.
My bootloader version is KE1, but my baseband version is LF2, makes no sense to me.
The KE1 bootloader was when I was on ICS, but the LF2 baseband was from Jellybean... wth?
Do you think the time I flashed "stock+unroot" on the toolkit that it only partially took? (I did try to back it up to ICS because the Jellybean download didn't work). It seemed as if it flashed everything via fastboot, but never restarted at the end and still won't boot when done.
same problem kinda
i am having the same problem as this with my nexus. mine started after i downloaded Jellybean.it worked fine for about 1 month. i had changed nothing but when i would change my battery or restart my phone it would get stuck at the google screen every now and then, then it started more often. i could normally pull the battery and restart it and it would work after a couple of times doing that. but now this last time i tried that the phone wouldnt go past google screen at all. i can access my clockwork mods recovery but when i try to install zip from sd i get the error cant load sd i have tried everything i know and cant get nothing to work. please help. i miss my nexus this prevail is too slow and small...
Your drivers don't seem to be installed properly.
Get that right, then you can reflash your recovery via fastboot, then you can mount your usb and transfer anything (rom kernel gapps etc etc)
Edit: oh and Bamamac82, that's not the same problem at all. Create a topic of your own.
polobunny said:
Your drivers don't seem to be installed properly.
Get that right, then you can reflash your recovery via fastboot, then you can mount your usb and transfer anything (rom kernel gapps etc etc)
Edit: oh and Bamamac82, that's not the same problem at all. Create a topic of your own.
Click to expand...
Click to collapse
@ polobunny - There is no way for me to install them more properly if I can't go into debug mode to install them though... I wiped out ALL drivers and manually reinstalled the drivers from PDAnet that had previously worked perfectly on my device. But now it never installs as Nexus S, only as Samsung ADB Interface or some such. I've tried it with PDAnet drivers and the Samsung drivers and have followed every driver install guide on the web... Any other suggestions on how to do this properly? I was even thinking of installing a Google SDK just to see if the drivers would work better...
@ Bamamac82 - Yes, that is pretty much the exact same problem, with the exception of the fact that you didn't wipe the /boot partition as I did. But yeah, I installed a JB ROM, it got a few random restarts, froze up twice, then one morning got stuck in a bootloop after I pulled the battery on a freeze up. Not having a working USB cord at the time botched me, because I couldn't get my drivers reliably installed before anything happened, I was using AirDroid because my OEM cable wasn't working with data reliably.
I totally thought the sdcard problem was because I formatted /boot in a hasty ROM flash though. Could I be wrong here?
DizturbedOne said:
There is no way for me to install them more properly if I can't go into debug mode to install them though... I wiped out ALL drivers and reinstalled the drivers from PDAnet that had previously worked perfectly on my device. But now it never installs as Nexus S, only as Samsung ADB Interface or some such.
And Bamamac82 has the exact same problem, with the exception of the fact that he didn't wipe the /boot partition as I did. But yeah, I installed a JB ROM, it got a few random restarts, froze up twice, then one morning got stuck in a bootloop after I pulled the battery on a freeze up.
I totally thought the sdcard problem was because I formatted /boot in a hasty ROM flash though. Could I be wrong here?
Click to expand...
Click to collapse
When you're in fastboot mode on your phone, on your windows PC point the unknown device or the device with an exclamation/question mark to the path where the .inf for the drivers are located. If it still doesn't detect it, you can always try and force it to install a certain device (adb debug bridge or something of the sort).
Once that is done as I said you won't have any problem fastboot'ing to your phone and doing the other steps. Windows drivers and especially the adb drivers can be finnicky.
Your SDcard problem has nothing to do with the fact your formatted boot partition though, those are not linked.
Edit: Oh and I know there is some people, namely with NS4Gs, that had issues with the drivers. I believe for some reason there's some missing IDs in the inf making it impossible to install automatically. Forcing it should work though.
Polobunny thank you so much for your help so far. My device has been softbricked for a week and I'm using a HTC Hero for now! It's atrocious. I'm going to try as you said when I get home tonight and will update if fastboot allows me to flash after that.
Any idea where I can get all the .img's I need? I can only find the complete .tgz for IMM76D (which is fine for now just want it back to working state) and don't know how to extract .img's from it. Can't even find the complete .tgz for JRO03R though, the link is always down. At this point, all I want is a factory img to start from so I can upgrade to JRO03R, root it, and then make a fresh NAND backup from there.
If I were you, I would download Odin, a factory image from Google (just search nexus s factory image), the SDK tools (Google it) and would "reset" the phone.
You will easily find a guide for Odin. Then you'll just have to follow it and your nexus should be fine (but it will be factory reseted and you will have lost all your data )
Sent from my Nexus S using xda premium
Sorry guys, have been putting late hours in at work and haven't had much time until this weekend.
@BenHeng, that's what I am about to look into tonight. I didn't want to learn an entirely new aspect to restore this, I have been limited on free time and am starting to think it will be less hassle than dealing with this.
Only caveat to that, is that I definitely would like to know what happened to cause the SDCARD problem, because that was the main problem that got to me here, would like to prevent that from happening again.
ADB
Make sure ADB debuging is checked under Developer options
localpagefirst said:
Make sure ADB debuging is checked under Developer options
Click to expand...
Click to collapse
Please read the thread before replying.
@polobunny - I did a complete manual install of the RAW drivers, and got it to recognize properly as a Nexus S, as it did when USB Debug and everything worked correctly... But it still does not recognize it as an ADB device when running a driver check.
Is it safe to continue forward with a flash via ODIN in this state?
Hi, I don't understand why you want to use ODIN, fastboot commands still don't work after you installed correctly your driver?
Anyway you can find all (new and old) originals google image here:
http://www.randomphantasmagoria.com/firmware/nexus-s/
Listen mate, the best way would be to flash the factory image via fastboot in bootloader mode. Follow this simple step to step guide.
If you have any issues. post them there on the blog post itself :good:
DizturbedOne said:
Please read the thread before replying.
@polobunny - I did a complete manual install of the RAW drivers, and got it to recognize properly as a Nexus S, as it did when USB Debug and everything worked correctly... But it still does not recognize it as an ADB device when running a driver check.
Is it safe to continue forward with a flash via ODIN in this state?
Click to expand...
Click to collapse
Please, please don't use a shi**y 1-click package thing. There's no driver check to be done other than using adb and typing "adb devices". Do it manually and report the results. It should show your adb device ID, a long string of number and letters.
polobunny said:
Please, please don't use a shi**y 1-click package thing. There's no driver check to be done other than using adb and typing "adb devices". Do it manually and report the results. It should show your adb device ID, a long string of number and letters.
Click to expand...
Click to collapse
I get nothing when I do that. It says "List of devices attached" and a blank line underneath. When I plug the USB in during fastboot I get "STANDARD_SET_CONFIGURATION" at the bottom, which I never get until I install the drivers.
It seems as if the computer must recognize the device in debug mode in some way to properly install the drivers.
Why is my sdcard partition unable to be written to? This never would have been a problem as I always keep a couple backup ROM's on the phone. Either way, it seems as if all of this is for nothing if the phone will not allow me to read/write to the memory in the device.
Hi guys,
I recently traded an iPhone for a nexus 5 and I've been loving it except I've been having an issue lately. The phone was flashed with a custom rom and kernel. I had a couple of issues so I attempted a factory wipe via cwm but it seemed to freeze when it says 'wiping cache' etc. so I restarted the phone by pressing the three buttons and now I can't save anything to my phone (it says no sd card) and I keep getting 'google play error reports' and I cant access the camera.
I've been attempting to flash to stock in hopes that it would solve the problem and that I could get updates OTA in future so I downloaded 4.4.2 and managed to get the adb and fastboot files working via nexus root toolkit. When I attempted to flash the rom onto my phone, NRT reboots my phone into fastboot mode and a script comes up saying 'it should take 5 or so minutes' and 'press any key to finish' - except my phone is doing nothing but showing the regular fastboot screen.
So I've looked all over and found a method posted online that uses cmd to flash it but I need a file called something like 'hammerhead434839.img' except I cant find it. I figured that it would be in the recovery rom I got from google so I opened up the .tar file but there is only one file inside.
Theres another method I found that uses some 'flashall.bat' but I am not sure where to find it.
Does anyone have any suggestions? I'd really appreciate it as I cant even make or receive calls or texts anymore. thank you
matbahi said:
Hi guys,
I recently traded an iPhone for a nexus 5 and I've been loving it except I've been having an issue lately. The phone was flashed with a custom rom and kernel. I had a couple of issues so I attempted a factory wipe via cwm but it seemed to freeze when it says 'wiping cache' etc. so I restarted the phone by pressing the three buttons and now I can't save anything to my phone (it says no sd card) and I keep getting 'google play error reports' and I cant access the camera.
I've been attempting to flash to stock in hopes that it would solve the problem and that I could get updates OTA in future so I downloaded 4.4.2 and managed to get the adb and fastboot files working via nexus root toolkit. When I attempted to flash the rom onto my phone, NRT reboots my phone into fastboot mode and a script comes up saying 'it should take 5 or so minutes' and 'press any key to finish' - except my phone is doing nothing but showing the regular fastboot screen.
So I've looked all over and found a method posted online that uses cmd to flash it but I need a file called something like 'hammerhead434839.img' except I cant find it. I figured that it would be in the recovery rom I got from google so I opened up the .tar file but there is only one file inside.
Theres another method I found that uses some 'flashall.bat' but I am not sure where to find it.
Does anyone have any suggestions? I'd really appreciate it as I cant even make or receive calls or texts anymore. thank you
Click to expand...
Click to collapse
Google nexus 5 binaries. Download the 4.4.2 factory image. Use 7-zip to extract it. In there you'll find the flash-all batch file