Need to know how to make a phone (it can be rooted) to load my program, and not let the user out of the program without a password that we setup. This phone is a specific android phone for route drivers.
Hello,
Welcome to XDA.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Related
Asus Iconia B1. I went to modify a file in system and set the mount option on Es File explorer. Modified the file and forgot to do the mount bit again. Booted and it locks on boot 'Iconia' screen.
I can boot into recovery and see the 3 menu options for Clean boot etc, but none of these have resulted in anything. Unfortunately I do not have a rom on the tablet either to try and install anything else?
I have tried via windows 7 to connect via adb, but the tablet can't be seen? I'm sure the correct drivers should be on, but nothing? kill-server, start-server, devices always brings up nothing?
Can anyone please help?
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts but first you must register an account on XDA forum:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
I did register and posted (apparently in the wrong forum), so the Mod moved it here?
Please advise?
No you posted in the right forum I gave you above here: [Q] Broken tablet in recovery. Cannot connect USB from windows
Please wait an answer there.
Thread closed, thank you.
I actually have several errors here that I need help with.
1. Superuser is telling me to update the binary and giving me two options. Cancel and Recovery Install. The first does what it says but the second brings up an error message, which says,
"There was an error installing Superuser. Please send a log of the error to the developer. "
I click OK and check the log file, but its empty.
2. The file manager tells me that I cant extract the UPDATE-supersU-.zip that I pushed from my computer because I don't have root access.
3. The app Device Control doesn't register that my device is rooted and thus will not function at all.
4. The screen will turn on immediately after timing out. The phone isn't set to be always on.
5. The only way I can boot into twrp recovery is through the app Flashify.
If someone out there helps me it would be much appreciated because my tribute is my only phone and I need it to function
Hi there,
I'm sorry but I can't find anything related to your question/device except this thread: [Q] Anyone interested in LG Tribute development?
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Later edit: I see you already founded the right place for this question here.
Thread closed.
Forenote: I believe I am in the correct forums section but If I am not, please redirect me. Thanks.
My phone is rooted. I have kingroot installed.
I am trying to spoof my mac address on my android for wifi. I have downloaded just about every app on the Playstore that has to do with automatic MAC spoofing/changing. I have gotten two apps to work. The app "MacSpoofer" (and another app I cannot remember) that have appeared to change my mac address, but when I try and use the internet I cannot connect to anything.
It says I have correctly spoofed my mac, and it displays two mac addresses; my original mac address, and then below it, it shows the new mac address that it has given me to use, but when I try to connect to the internet on the wifi it cannot connect to anything.
If anyone has a solution to my problem or another app I could use from the playstore that would work with my phone, or a guide I'd appreciate it.
Hi,
Here is the section for your device, http://forum.xda-developers.com/t/galaxy-core-prime
You could ask there for help. My guess though, is that since you rooted with kingroot, you still have a write protected system, and therefore can't accomplish this. Just a guess though, as I don't know about your specif device. The folks in the section above do though.
Maybe this could help too, http://www.xda-developers.com/spoof-your-mac-address-the-easy-way/
Good luck!
Darth said:
Hi,
Here is the section for your device, http://forum.xda-developers.com/t/galaxy-core-prime
You could ask there for help. My guess though, is that since you rooted with kingroot, you still have a write protected system, and therefore can't accomplish this. Just a guess though, as I don't know about your specif device. The folks in the section above do though.
Maybe this could help too, http://www.xda-developers.com/spoof-your-mac-address-the-easy-way/
Good luck!
Click to expand...
Click to collapse
Thanks I'll head over there
Hi
Can anyone please enlighten me on how to fix my Garmin 660 GPS
My issue started when I plugged the unit into the computer to perform a routine map update
I had been having some issues with a few of the media files that I play so I thought I would replace the MP3 files on the MicroSD card only this this I left it in the unit
I usually format the card and install new files separately from the unit but I formatted the card yet by some magical god like intervention the internal storage was also wiped.
I would suspect that Garmin would not make it this easy to delete important files as now the unit is not detected by any computer. The unit has deleted the maps.
It just starts and restarts over and over - I finally managed to get a hard reset to actually do something at all. Now and then it will bring up the software (no maps)and will Bluetooth but a hard reset every time to make this happen and does not always work - basically it a useless device.
None of the Garmin programs can see the GPS - I have backup of the device but no help - I have the factory software no help, the factory reset - partial but does not load the drivers - tried many Gamin driver update - took it back to supplier (GPS specialist) they said have to send to Garnin
I ride a bike and it is hard without the GPS to find my way around plus it include music and my phone plus it cost over $600
surely it is possible to access the root directory and replace what ever files it needs
My question is
How can I get the device to open a port to access the internal storage and load what ? to get the USB port functioning when it plugged into the computer.
I have basic computer knowledge - If anyone knows how to fix this issue please be kind enough to explain the method in easy to follow instructions and exactly what file or files I need and where I can obtain them and how to install them,
Can the port be forced to open -I tried a couple of methods from the net but didn't work for me
Please help if you can
Many thanks for reading and all suggestions would be much appreciated
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you
___
v7
XDA Assist
Hello, I'd like to kindly ask for some assistance.
I got a GPS device Telesystem ts 8511 running on windows ce 5.0. I tried to update maps on it but it wouldn't let me, beacuse of licenses. So I tried to unlock it with Miopocket. But in the process I have formatted SD card on which there was quite a lot of factory installed GPS program and navigation didn't work anymore, nor did Miopocket (couldn't find a way to instal it). So I found a way to rest the device by using files providet by manufacturer on it's website. that procedure lead me to point where device is asking for SD card I formatted earlier.
I'm triying to get to the os in the device and install some other navigation app on it.
I would really appreciate some help.
Hello,
Welcome to XDA.
I am not finding anything at all for your device anywhere in XDA. Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.