I tried to wipe data/ factory reset but something went wrong and now its stuck with the android logo with and exclamation.
I tried to fix it it ADB but i get "Installation Aborted"
the current screen its stuck on have the following:
Android system recovery <3e>
S960_ROW_S211_140702
Volume down to move highlight;
Volume up to select
reboot system now
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
Now send the package you want to apply
to the device with "adb sideload <filename>....
Installation aborted
Hello,
Welcome to XDA.
I didn't find a forum for your device but you can post your question in the link below.
http://forum.xda-developers.com/general/help
The experts there will help you. Remember to create an XDA account so you can post and reply in the forums. Good luck.
Related
my samsung note 2 n7105 was stuck in recovery mode/(manual mode?) after i tried to flash cyanogen mod on it with mobile odin. every time i try to on my phone, this is what it says:
Android system recovery <3e>
KOT49H.N7105XXUFNH1
Volume up/down to move highlight;
power button to select.
Reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
________________________________________________________________________________________________
# MANUAL MODE #
-- Appling Multi-CSC . . .
Applied the CSC-code : SIN
Successfully applied multi-CSC .
-end-
i have tried the options wipe data/factory reset, wipe data partition and reboot system now but it just brings me back to the same place. i have also tried going into download mode and then restarting my device but it comes to the same page again. i tried to use the computer odin but my device cannot connect to it and my usb cable is not spoilt. Is my device bricked? How do i fix it? please help me. thank you
XDA Visitor said:
my samsung note 2 n7105 was stuck in recovery mode/(manual mode?) after i tried to flash cyanogen mod on it with mobile odin. every time i try to on my phone, this is what it says:
Android system recovery <3e>
KOT49H.N7105XXUFNH1
Volume up/down to move highlight;
power button to select.
Reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
________________________________________________________________________________________________
# MANUAL MODE #
-- Appling Multi-CSC . . .
Applied the CSC-code : SIN
Successfully applied multi-CSC .
-end-
i have tried the options wipe data/factory reset, wipe data partition and reboot system now but it just brings me back to the same place. i have also tried going into download mode and then restarting my device but it comes to the same page again. i tried to use the computer odin but my device cannot connect to it and my usb cable is not spoilt. Is my device bricked? How do i fix it? please help me. thank you
Click to expand...
Click to collapse
Custom ROMs, such as CM usually come as zip files, which have to be flashed in custom recovery. Not in Odin or Mobile Odin app.
Check this official CM thread: [ROM][GT-N7105][JB][4.3.0] CyanogenMod 10.2 official nightly builds // discussion.
In the first post, you can find a detailed installation guide.
Flashing the ROM correctly should fix the issue ... if you have a custom recovery.
If not, you will need to flash with PC version of Odin.
For more information, please register on xda and ask in the [NOOB FRIENDLY] Ask the question! [N7100 and other variants] thread.
Thread closed. Thank you.
Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
bobs353 said:
Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.You can post your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you
___
v7
XDA Assist
My Sero 7 (UK) is stuck at logo screen. I can boot to recovery (after I have disconnected the battery and reconnected back). The recovery menu offers:
Apply update from ADB
wipe data/factory reset
wipe cache partition
Apply update from sdcard
The device is not rooted. Is it still possible to install Philz Touch Recovery in order to install DoPa v2.51?
Greatly appreciated if anyone can help.
I have posted this on the Q&A section of another forum:
http://forum.xda-developers.com/android/help/qa-sero-7-pro-aosp-4-4-4r2-dopa-v2-51-t2924457/page7
Not sure if it is being monitored.
tkcx said:
My Sero 7 (UK) is stuck at logo screen. I can boot to recovery (after I have disconnected the battery and reconnected back). The recovery menu offers:
Apply update from ADB
wipe data/factory reset
wipe cache partition
Apply update from sdcard
The device is not rooted. Is it still possible to install Philz Touch Recovery in order to install DoPa v2.51?
Greatly appreciated if anyone can help.
I have posted this on the Q&A section of another forum:
http://forum.xda-developers.com/android/help/qa-sero-7-pro-aosp-4-4-4r2-dopa-v2-51-t2924457/page7
Not sure if it is being monitored.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. If you haven't already, I'd recommend using the wipe cache partition choice first, then rebooting. If that doesn't work, you should do the factory reset. You'll lose your data but you may have a working device. Which you clearly don't at the moment. Any further questions can be posted here:
Android Q&A, Help & Troubleshooting
Good luck!
I have an ICOO D70G2 7" tablet that will not boot. Any assistance with finding an img file for this device and instructions on how to flash the ROM would be much appreciated. The recovery screen has only the following:
Recovery Mode
Fastboot Mode
Normal
If I go into recovery, I get the following options.
reboot system now
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
I have both Win10 and Win7 for doing the flash.
Sorry for typo : D70G2
leojbourne said:
I have an ICOO D7G2 7" tablet that will not boot. Any assistance with finding an img file for this device and instructions on how to flash the ROM would be much appreciated. The recovery screen has only the following:
Recovery Mode
Fastboot Mode
Normal
I have both Win10 and Win7 for doing the flash.
Click to expand...
Click to collapse
D70G2.
More on D70G2
leojbourne said:
D70G2.
Click to expand...
Click to collapse
If I go into recovery, I get the following options.
reboot system now
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
Hello,
Welcome to XDA.
There is no forum for your device. Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Hi i'm new to this forum but last night i tried updating my huawei ascend y540-u01 to a new sofware version and got the "no command" screen. Bow i'm in recovery mode with the options:
Reboot system now
Apply update from ADB
apply update from sd card
Apply update from cache
Wipe data/factory reset
Wipe cache data
Backup data
Restore data
Root check
I tried to wipe data and cache and then reboot system but is doesn't work. it starts up an shuts down and goes back to the recovery menu. Can anyone help me with this?