Database Info

fastboot questions

I come from the world of Windows Mobile and have just recetly delved into hacking my G1. While I've had no problems installing jesusfreke's images or themes...I'm struggling with how to get fastboot to work.
Perhaps someone can give me some guidance. Anyone willing to give me some simple step by step instructions. I've searched for this and i think I have everything i need, but I'm unable to get to a point where I can type in commands. when i try to run adb, it open very briefly and closes.
What am i doing wrong?
Thanks,
Jason

Go to start -> run -> type in CMD
Navigate to the folder where adb is located.
Then type in adb devices to see if it finds ur device.
If not then make sure you have it plugged in and USB debugging is turned on in the phones settings under Development.
Also download the usb drivers/or the whole SDK if you havent yet.

nosaj13 said:
when i try to run adb, it open very briefly and closes.
Click to expand...
Click to collapse
If you try to execute a text mode executable in windows, it will close the terminal window as soon as the program finishes. If you run adb without any arguments, it will print the arguments out terminate. I could say the solution is to open run as and type cmd, but the true answer is to install Linux

nosaj13 said:
I come from the world of Windows Mobile and have just recetly delved into hacking my G1. While I've had no problems installing jesusfreke's images or themes...I'm struggling with how to get fastboot to work.
Perhaps someone can give me some guidance. Anyone willing to give me some simple step by step instructions. I've searched for this and i think I have everything i need, but I'm unable to get to a point where I can type in commands. when i try to run adb, it open very briefly and closes.
What am i doing wrong?
Thanks,
Jason
Click to expand...
Click to collapse
1. Download this
2. Extract the contents of the fastboot directory to the root of your C drive.
3. Go Start -> Run -> type 'cmd' (no quotes) and hit enter
4. Type 'c:' (no quotes) and hit enter
5. With your phone plugged in, you should be able to type 'adb devices' and it should return your phones serial number, which is usually in HTXXXXXXXX format. If it does not, make sure debugging is enabled on your phone and you have the adb drivers installed.
6. type 'adb shell reboot bootloader' and hit enter. The screen on your phone will go blank for a second and then you should be in the SPL with the skating androids. Make sure you see "FASTBOOT" at the bottom of the screen.
7. type 'fastboot devices' and hit enter. If you see your phone's serial number again, you have successfully established a fastboot connection with the phone and can run commands such as:
fastboot erase <partition> (erases the given partition)
fastboot flash <partition> <file.img> (overwrites and flashes given partition with given file. This is how one would restore from a nandroid backup)
fastboot reboot (reboots the device into user mode)
Hope that helps. Have fun

when i type adp devices i get an error that says "adp is not recognized as an internal or external command, operable program, or batch file"
what am i doing wrong?

nosaj13 said:
when i type adp devices i get an error that says "adp is not recognized as an internal or external command, operable program, or batch file"
what am i doing wrong?
Click to expand...
Click to collapse
First, the command is adb devices not adp. Second, make sure you copied the contents of the fastboot directory to the C drive. Third, make sure you that when you type 'c:' into the command line, the command prompt actually changes to "C:\>"

Datruesurfer said:
1. Download this
2. Extract the contents of the fastboot directory to the root of your C drive.
3. Go Start -> Run -> type 'cmd' (no quotes) and hit enter
4. Type 'c:' (no quotes) and hit enter
5. With your phone plugged in, you should be able to type 'adb devices' and it should return your phones serial number, which is usually in HTXXXXXXXX format. If it does not, make sure debugging is enabled on your phone and you have the adb drivers installed.
6. type 'adb shell reboot bootloader' and hit enter. The screen on your phone will go blank for a second and then you should be in the SPL with the skating androids. Make sure you see "FASTBOOT" at the bottom of the screen.
7. type 'fastboot devices' and hit enter. If you see your phone's serial number again, you have successfully established a fastboot connection with the phone and can run commands such as:
fastboot erase <partition> (erases the given partition)
fastboot flash <partition> <file.img> (overwrites and flashes given partition with given file. This is how one would restore from a nandroid backup)
fastboot reboot (reboots the device into user mode)
Hope that helps. Have fun
Click to expand...
Click to collapse
i did all the above steps with no problem at all till i got to number 7. when i typed in fastboot devices it just goes to the next prompt without my phone showing up.
If i plug in my g1 in normal mode i see it at the top under adb and in the usb section as a mass storage device.
In bootloader mode with fastboot on the screen it doesnt show up anywhere in the device manager.
Also when i follow the above quoted steps and type in the "adb shell reboot bootloader" and hit enter i hear the ding you hear when you unplug a usb device, and all instances of the phone then leave the device manager.
i have also uninstalled and reinstalled all drivers for the phone and all drivers that have to do with the usb ports on my win xp machine.
Anyone have any ideas i could try?

I think you need this program. I put it on my desktop, then just ran cmd, directed to it, and type in fastboot.

I7oobie said:
I think you need this program. I put it on my desktop, then just ran cmd, directed to it, and type in fastboot.
Click to expand...
Click to collapse
thats not it. i have that in the sys 32 folder and also on desktop

Fastboot mode not recognized
I'm having the same problem. I've installed all the correct drivers and in normal mode, I see the Android Composite Device (or something similar) in Device Manager.
As soon as I go into SPL mode (the 3 skateboarding androids screen), the device does not show up.
Anyone have any ideas? Thanks!

Datruesurfer said:
First, the command is adb devices not adp. Second, make sure you copied the contents of the fastboot directory to the C drive. Third, make sure you that when you type 'c:' into the command line, the command prompt actually changes to "C:\>"
Click to expand...
Click to collapse
When I'm in the Command Prompt and I type C:, the directory still reads C:\Documents and Setting\Reids. It won't change to only C:

Hi,
You have to do this to get back to c:
cd\
press enter
That should do it.

bestwebs said:
Hi,
You have to do this to get back to c:
cd\
press enter
That should do it.
Click to expand...
Click to collapse
Ok, thanks a lot. Got it working now.

I need help trying to flash my cupcake images that I have stored in my fastboot folder. I attached the pictures below. I will accept any help I can get.

EDIT: Doh, I thought I was in another topic.
My bad.

Are adb & adb's dll files located inside the same folder as fastboot??? They are suppose too be.
Is your usb cord directly plugged into your system or thru a hub??
Your phone, i bet is under usb mass....to check, expand your device manager window.
Expand your USB-Mass storage list.
With your phone in fastboot mode, click on the camera key and the back key. With enough time inbetween for your system to recognize that there might be a device hooked up.
Notice any change in the list??

Anyone wanting good instructions
http://androidcommunity.com/forums/f28/nandroid-v2-0-full-nand-backup-and-restore-tool-9336/
Read post 2 and go!

this seems like the most easiest thing to do but i still cant get it to work
i have downloaded everything needed and see ADB Interface on my device manager with a yellow mark on it when i try to update the dirver it fails and i got the drivers and point them to it but seems not to work
my phone is on the fastboot screen with the android skateboards guys
i dont know whats going on if someone know what am also doing wrong can tell me please...
This is what i get

Need Help

Hi everyone, just trying to get ADB working with the Galaxy S2 Skyrocket, anyone want to point me in the right direction? I have android SDK but when I launch adb a command line pops up for a second and closes before I can do anything, and where can I find the ADB drivers? If you could help, that would be great, thanks!

If your using windows. Click start type in cmd hit enter
Open the directory where adb is. You can type adb start-server then press enter
Make sure you have debugging turned on in your phones settings.

So that's how you launch it! thanks, can I run it by just opening it with command line?

saying daemon started, but not doing anything, but my phone is running CWM at the moment, should I try again after?

If its running then abd is running. What are you trying to do with adb theres a ton of dfferent commands

Yea the command is going through but nothing is happening

silver03wrx said:
If its running then abd is running. What are you trying to do with adb theres a ton of dfferent commands
Click to expand...
Click to collapse
No command line is coming up, or something it just goes through

nsilverman15 said:
No command line is coming up, or something it just goes through
Click to expand...
Click to collapse
Oh I got it, use it right in command line

[Q] Serious problem

Hi,
please help me! I hope it is not a brick.
I wanted to make full wipe. I made factory reset in recovery and then wiped sdcard.. Now I cannot boot ROM because there is no one and I have nothing on my SD. So I even cannot copy rom or backup back to phone.
Is there any way out? (
EDIT: I think I can push files (e.g. backup) through adb, right? I installed adb for dummies but when I want to execute SDKmanager.exe. it only opens black window and immediately closes it. I cannot continue

devcager said:
Hi,
please help me! I hope it is not a brick.
I wanted to make full wipe. I made factory reset in recovery and then wiped sdcard.. Now I cannot boot ROM because there is no one and I have nothing on my SD. So I even cannot copy rom or backup back to phone.
Is there any way out? (
EDIT: I think I can push files (e.g. backup) through adb, right? I installed adb for dummies but when I want to execute SDKmanager.exe. it only opens black window and immediately closes it. I cannot continue
Click to expand...
Click to collapse
Access your commands through a terminal window, like start > run > cmd to get into the prompt.
and from there work your way to your directory where you have placed it, and execute the command from that directory directly.

..

Thanks!
In the end I used adb to push backup in recovery...
All this I did because I wanted wipe my device - today I woke up and got a call and found out that my earphone stopped working I am afraid that it is due to condensation and next oxidation... I did not do anything wrong but when you come from cold winter weather into a warm flat it can happen Now I need to send it and hope the warranty will pass..
Anyway, I was looking for complete unroot process and found several advices. I am not clever from them. Is it enough to flash stock ROM? Recovery will be removed as well??

..

Election Day said:
Flash a stock ROM (this will also flash the stock recovery) and relock the bootloader with fastboot oem lock afterwards.
Click to expand...
Click to collapse
Ok. I have everything done but the relocking. Could you tell me how shall I do this? I tried to write "adb reboot bootloader" and then " fastboot oem lock" but both case the command line responded something like that it is not internal command etc. (I dont have it in English) Cannot lock it

devcager said:
Ok. I have everything done but the relocking. Could you tell me how shall I do this? I tried to write "adb reboot bootloader" and then " fastboot oem lock" but both case the command line responded something like that it is not internal command etc. (I dont have it in English) Cannot lock it
Click to expand...
Click to collapse
1.Switch off your phone
2.Connect your phone to your PC throught the USB cable
3.Switch on phone into fastboot
4.Provided that you have the driver for windows for the phone installed open Start/run/cmd (from your PC)
5.From the Android-SDK/platform-tools run the following "fastboot oem lock".
like :
C:\Android-sdk\platform-tools\fastboot oem lock
this will lock it immediately ...

mahanddeem said:
1.Switch off your phone
2.Connect your phone to your PC throught the USB cable
3.Switch on phone into fastboot
4.Provided that you have the driver for windows for the phone installed open Start/run/cmd (from your PC)
5.From the Android-SDK/platform-tools run the following "fastboot oem lock".
like :
C:\Android-sdk\platform-tools\fastboot oem lock
this will lock it immediately ...
Click to expand...
Click to collapse
it works only in "tools" and then it just says "waiting for device" and stucks When I tried "fastboot devices" it says nothing... I tried to reinstall drivers but maybe I have some old version? When I am in Windows copying files etc. it works well.

1. Make sure you open the command prompt IN in the folder with fastboot.exe.
2. Put the phone in fastboot mode.
3. In the command prompt type fastboot devices.
It will now show your serial number. If not its either you are such a noob that you managed to screw that up or the fastboot drivers are not installed. Or both.

albundy2010 said:
1. Make sure you open the command prompt IN in the folder with fastboot.exe.
2. Put the phone in fastboot mode.
3. In the command prompt type fastboot devices.
It will now show your serial number. If not its either you are such a noob that you managed to screw that up or the fastboot drivers are not installed. Or both.
Click to expand...
Click to collapse
OK. I really dont understand what could have been screwed up. Ok. It doesnt show anything. Just nothing. Cen you please send me the link for the drivers which should work? Maybe there is the problem. Fastboot drivers are something else than drivers for adb to be working? Because I dont know whats wrong. Thanks...

devcager said:
OK. I really dont understand what could have been screwed up. Ok. It doesnt show anything. Just nothing. Cen you please send me the link for the drivers which should work? Maybe there is the problem. Because I dont know whats wrong. Thanks...
Click to expand...
Click to collapse
If you have i9023 you need to add a line into the sdk for driver. You can search the tutorial threads for it.
Sent from my Nexus S using Tapatalk

try this
just check if you have fastboot and adb on the same folder, when I've rooted mine's got this issue, if cmd report "the command is an external one" simply means there is no such program in the folder you are in
copy both adb and fastboot in tools and platform-tools too, so you can run the command in both folder
cd>desktop > cd android>cd android-sdk> cd tools (then run adb or fastboot)
cd>desktop > cd android>cd android_sdk> cd platform-tools (thr run adb or fastboot)

1. Find out exactly what phone model you have if you don't know already.
2. Do the same for your computers os . Including 32 or 64 bit.
3. Combine that info and search the forum or just Google search. How to install fastboot drivers for phone model in step 1 with the os in step 2.

..

Thank you all. I decided to unroot it and relock it using Odin software which was great and quick. So I am done.... Adb has a lot of problems with drivers, commands, paths. This way was much easier

adb has no issues. User error.

albundy2010 said:
adb has no issues. User error.
Click to expand...
Click to collapse
+1
Sent from my GT-I9100 using XDA App

albundy2010 said:
adb has no issues. User error.
Click to expand...
Click to collapse
Maybe you are right. Maybe it was driver problem which I solved and then immediately used odin. Anyway, it is user friendly and I am finally done with what I wanted

albundy2010 said:
adb has no issues. User error.
Click to expand...
Click to collapse
Agreed, but not the user friendliest.
For the OP: Good luck having it repaired!

Unlocked bootloader

I have my Samsung note 3, and it will never be unlocked. So i was thinking about moving to this. Is the Verizon edition unlocked for custom roms?
Sent from my SM-N900V using XDA Free mobile app

scoreboard said:
I have my Samsung note 3, and it will never be unlocked. So i was thinking about moving to this. Is the Verizon edition unlocked for custom roms?
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
It doesn't come unlocked, but you can unlock it. That's why are a lot of us are on this phone. I had an S5 ordered, but decided against it, when I saw there wasn't any progress being made on it. I cancelled my order, bought my M8, and haven't looked back. Give me an unlocked bootloader, or give me death.

You can S-OFF (which unlocks bootloader) & root it immediately after getting it.
I came from a locked Galaxy S4 and have to say this phone is snappier than an iPhone & as unlockable as a door thats compatible with all keys ;D. Love love loveeee this phone and highly recommend it! Go for it!
I unlocked mine the moment I got home with it, no OTA update required as some people have said to do before unlocking it & as far as I've seen no ones had an actual "Oh no! They made it impossible to unlock like Sammysung!" moment.

Ive tried a for the last two days to root my htc m8..but i can not get it to work...tried htc unclock tried setting up adb...but the first gives me an mid error and the second does not recognize my phone...i did install the newest update before i tried to s-off....any help would be great...

Frausbite77 said:
Ive tried a for the last two days to root my htc m8..but i can not get it to work...tried htc unclock tried setting up adb...but the first gives me an mid error and the second does not recognize my phone...i did install the newest update before i tried to s-off....any help would be great...
Click to expand...
Click to collapse
Have u tried the weak sauce app for root then fire water to s-off?
Sent from my Insanely powered M8 using Tapatalk

holla420 said:
Have u tried the weak sauce app for root then fire water to s-off?
Sent from my Insanely powered M8 using Tapatalk
Click to expand...
Click to collapse
I set up adb using the method from root junky. but my computer won't recognize my device. I must have tried it like 50 times, so i tried the htcdev unlock method...my computer recognizes by device but after i copy the token i get the mid 160 error.

Frausbite77 said:
I set up adb using the method from root junky. but my computer won't recognize my device. I must have tried it like 50 times, so i tried the htcdev unlock method...my computer recognizes by device but after i copy the token i get the mid 160 error.
Click to expand...
Click to collapse
U must not being in the right directory
Sent from my Insanely powered M8 using Tapatalk

Frausbite77 said:
I set up adb using the method from root junky. but my computer won't recognize my device. I must have tried it like 50 times, so i tried the htcdev unlock method...my computer recognizes by device but after i copy the token i get the mid 160 error.
Click to expand...
Click to collapse
What that guy above me said, if you using Windows make sure you right click+shift in the platform tools directly then see if it shows up with adb devices, if not check your drivers.

Frausbite77 said:
Ive tried a for the last two days to root my htc m8..but i can not get it to work...tried htc unclock tried setting up adb...but the first gives me an mid error and the second does not recognize my phone...i did install the newest update before i tried to s-off....any help would be great...
Click to expand...
Click to collapse
HTCDEV unlock doesn't work for the Verizon variant. To s-off just follow this step by step guide:
http://forum.xda-developers.com/showthread.php?t=2708628
PRO TIPS: Let's say that your adb and fastboot files are located in C:\Program Files\Android. Add this directory to your system path by pressing the Windows key and typing "environment". After a few letters you'll see an option called "Edit the System Environment Variables". Click on this option. The system properties windows will open to the Advanced tab. Click the Environment Variables button. In the System Variables field you'll see a variable called Path. Click on it and choose edit. In the variable value field you'll see a list of paths separated by semi colons. We want to add the path of your adb and fastboot files to the system Path variable so that adb and fastboot commands can be executed anywhere. For the example location I used above you would add the following to the end of the list:
;C:\Program Files\Android
To test, open a command prompt and type "adb". This should launch adb with no parameters. Now you can use adb and fastboot commands anywhere. When you download the firewater script file, you can just leave it in the Downloads directory. If you use Chrome you could click the arrow next to the file and choose "show in folder". Then shift+right click an empty portion of the Downloads directory window and choose "open command window here" (you can also shift+right click on folders icons to accomplish this). Should be easy to s-off now.
NOTES:
*Once adb is setup issue the command "adb devices" to ensure your phone is recognized. The first time you will get a popup on your phone asking if you want to allow the PC adb access. Make sure you check "always allow".
*Before you issue the "su" command wait about 30 seconds to allow WeakSauce to root the phone after reboot. If you get an error saying "su not found" it's because WeakSauce has not yet rooted the phone. Wait 10 seconds and try again.
*When you issue the "su" command wake your phone's display and look for a SuperSu request. Allow it obviously.
*It's possible that the process may fail. If it does just try again. If it keeps failing try a different USB 2.0 port. Also make sure you're using the best USB cable that you have. The one that came with the phone should work.

Doc Ames said:
HTCDEV unlock doesn't work for the Verizon variant. To s-off just follow this step by step guide:
http://forum.xda-developers.com/showthread.php?t=2708628
PRO TIPS: Let's say that your adb and fastboot files are located in C:\Program Files\Android. Add this directory to your system path by pressing the Windows key and typing "environment". After a few letters you'll see an option called "Edit the System Environment Variables". Click on this option. The system properties windows will open to the Advanced tab. Click the Environment Variables button. In the System Variables field you'll see a variable called Path. Click on it and choose edit. In the variable value field you'll see a list of paths separated by semi colons. We want to add the path of your adb and fastboot files to the system Path variable so that adb and fastboot commands can be executed anywhere. For the example location I used above you would add the following to the end of the list:
;C:\Program Files\Android
To test, open a command prompt and type "adb". This should launch adb with no parameters. Now you can use adb and fastboot commands anywhere. When you download the firewater script file, you can just leave it in the Downloads directory. If you use Chrome you could click the arrow next to the file and choose "show in folder". Then shift+right click an empty portion of the Downloads directory window and choose "open command window here" (you can also shift+right click on folders icons to accomplish this). Should be easy to s-off now.
NOTES:
*Once adb is setup issue the command "adb devices" to ensure your phone is recognized. The first time you will get a popup on your phone asking if you want to allow the PC adb access. Make sure you check "always allow".
*Before you issue the "su" command wait about 30 seconds to allow WeakSauce to root the phone after reboot. If you get an error saying "su not found" it's because WeakSauce has not yet rooted the phone. Wait 10 seconds and try again.
*When you issue the "su" command wake your phone's display and look for a SuperSu request. Allow it obviously.
*It's possible that the process may fail. If it does just try again. If it keeps failing try a different USB 2.0 port. Also make sure you're using the best USB cable that you have. The one that came with the phone should work.
Click to expand...
Click to collapse
Thank you for letting me know about the HTC Dev...I have a mac and set up ADB...it shows my phone off line...i get the message that says allow this computer and check always...i run adb devices and now it just returns blank...i reinstall drivers which is htc sync but the problem persists....

Frausbite77 said:
Thank you for letting me know about the HTC Dev...I have a mac and set up ADB...it shows my phone off line...i get the message that says allow this computer and check always...i run adb devices and now it just returns blank...i reinstall drivers which is htc sync but the problem persists....
Click to expand...
Click to collapse
Try 'adb kill-server' then issue 'adb start-server' then try 'adb devices'. If that doesn't work, try a different USB port. If still no joy try a different USB cable. If that doesn't work try restarting the Mac, restarting the phone, spinning around in an office chair three times, and blowing into a Nintendo cartridge. If that doesn't work I don't know what else to suggest besides trying it on a different computer or maybe in Windows. I've never had an issue with ADB so if somebody else has any ideas for Frausbite77 please chime in.
Edit: I googled this Mac ADB guide. I don't know if it really matters, but it says to have ADB/fastboot in the /usr/bin directory. Check it out. There's a script file and when run it installs the Android SDK tools to the appropriate folder. Also check the comments. Somebody else has probably had the same problem as you:
http://htc-one.wonderhowto.com/how-...-mac-os-x-send-commands-your-htc-one-0151178/
Edit 2: After reading a user's comment that the script was broken I looked at the script and it was, in fact, broken. I fixed it. Follow the guide but use this zip instead:

Doc Ames said:
Try 'adb kill-server' then issue 'adb start-server' then try 'adb devices'. If that doesn't work, try a different USB port. If still no joy try a different USB cable. If that doesn't work try restarting the Mac, restarting the phone, spinning around in an office chair three times, and blowing into a Nintendo cartridge. If that doesn't work I don't know what else to suggest besides trying it on a different computer or maybe in Windows. I've never had an issue with ADB so if somebody else has any ideas for Frausbite77 please chime in.
Edit: I googled this Mac ADB guide. I don't know if it really matters, but it says to have ADB/fastboot in the /usr/bin directory. Check it out. There's a script file and when run it installs the Android SDK tools to the appropriate folder. Also check the comments. Somebody else has probably had the same problem as you:
http://htc-one.wonderhowto.com/how-...-mac-os-x-send-commands-your-htc-one-0151178/
Edit 2: After reading a user's comment that the script was broken I looked at the script and it was, in fact, broken. I fixed it. Follow the guide but use this zip instead:
Click to expand...
Click to collapse
Ok, well so I never got adb to show my device on line....but when i typed ./adb reboot, the device actually responds to the commands...taking a risk i went ahead and pushed the firewater files and the process worked. I was able to unlock my device and install twrp...so i figured out that for and to work i have to type in ./ before i type in any commands...i don't if i messed something up along the way or what...but in the end i have gotten i was able to root and get s off....maybe i got lucky lol...thanks so much for the help!!

Frausbite77 said:
Ok, well so I never got adb to show my device on line....but when i typed ./adb reboot, the device actually responds to the commands...taking a risk i went ahead and pushed the firewater files and the process worked. I was able to unlock my device and install twrp...so i figured out that for and to work i have to type in ./ before i type in any commands...i don't if i messed something up along the way or what...but in the end i have gotten i was able to root and get s off....maybe i got lucky lol...thanks so much for the help!!
Click to expand...
Click to collapse
That's the proper command line for using Adb on a Mac. It won't work without using ./ before the command.
Sent from my HTC6525LVW using Tapatalk

Frausbite77 said:
Ok, well so I never got adb to show my device on line....but when i typed ./adb reboot, the device actually responds to the commands...taking a risk i went ahead and pushed the firewater files and the process worked. I was able to unlock my device and install twrp...so i figured out that for and to work i have to type in ./ before i type in any commands...i don't if i messed something up along the way or what...but in the end i have gotten i was able to root and get s off....maybe i got lucky lol...thanks so much for the help!!
Click to expand...
Click to collapse
My bad. I should have mentioned that to execute a file in a Unix-like operating system you need to enter the full or relative path if it's not in your $Path environment variable. That's why you needed to add a './' before the command. The './' indicates that the file is in the current directory. That's probably why that guide recommended putting adb and fastboot in /usr/bin. If you want to fix it so that adb and fastboot commands can be run from anywhere open a terminal, change to the directory where adb and fastboot are located, and issue the following commands:
sudo mv adb /usr/bin
sudo mv fastboot /usr/bin
That will move adb and fastboot into /usr/bin which is in your $Path so you can issue the commands anywhere without using './'. I'm glad you got your M8 s-offed and recovery installed. If you're looking into custom ROMs, I can personally recommend ViperOne as a great stock option and LiquidSmooth as an AOSP option. Try em' out. Now that you have recovery you can just restore a backup if you don't like your current ROM.

Doc Ames said:
My bad. I should have mentioned that to execute a file in a Unix-like operating system you need to enter the full or relative path if it's not in your $Path environment variable. That's why you needed to add a './' before the command. The './' indicates that the file is in the current directory. That's probably why that guide recommended putting adb and fastboot in /usr/bin. If you want to fix it so that adb and fastboot commands can be run from anywhere open a terminal, change to the directory where adb and fastboot are located, and issue the following commands:
sudo mv adb /usr/bin
sudo mv fastboot /usr/bin
That will move adb and fastboot into /usr/bin which is in your $Path so you can issue the commands anywhere without using './'. I'm glad you got your M8 s-offed and recovery installed. If you're looking into custom ROMs, I can personally recommend ViperOne as a great stock option and LiquidSmooth as an AOSP option. Try em' out. Now that you have recovery you can just restore a backup if you don't like your current ROM.
Click to expand...
Click to collapse
Thanks for the advice...actually i was just going to ask about some roms...just flashed viper rom and gonna give it a go...thanks for all the help...

Frausbite77 said:
Thanks for the advice...actually i was just going to ask about some roms...just flashed viper rom and gonna give it a go...thanks for all the help...
Click to expand...
Click to collapse
You'll love it. A couple thing to note though. For some reason the 1.6 download doesn't actually contain the 1.6 OTA so you'll want to go to 'About phone' and update to 1.6. Also I believe that ViperOne defaults to power saver mode. You can change this by using the toggle in the notification drawer. If you want to add power saver and extreme power saver to the settings menu follow this guide:
http://forum.xda-developers.com/showthread.php?t=2710946

Doc Ames said:
You'll love it. A couple thing to note though. For some reason the 1.6 download doesn't actually contain the 1.6 OTA so you'll want to go to 'About phone' and update to 1.6. Also I believe that ViperOne defaults to power saver mode. You can change this by using the toggle in the notification drawer. If you want to add power saver and extreme power saver to the settings menu follow this guide:
http://forum.xda-developers.com/showthread.php?t=2710946
Click to expand...
Click to collapse
wow, man viper rom is insane, thanks for the update heads up...i wouldn't have even thought to do that...guess i have tons of reading to catch up on...thanks...

[Q] Help using ADB pull

Hi,
I'm currently trying to use adb to pull some data from my phone but i always get "error: closed". Im running it from cmd.
When I use the command "adb devices" to see if my phone is connected, I get something different from the others is i am getting
List of devices attached
XXXXXX sideload
instead of what most other people got
List of devices attached
XXXXXX device
Is this a problem? What am i missing? Thanks a lot for ur time in reading this