*ATTENTION MODS* I am reposting.... sort of... the original thread is here
http://forum.xda-developers.com/showthread.php?p=9074948#post9074948
Hello! I am not new to rooting...I did get a new EVO 4G at best buy yesterday...
Went home and tried to root following another method than unrEVOked 3.21 and long story short had to RUU with "RUU_SuperSonic_S_Sprint_WWE_3.26.651.6_Radio_2.15 .00.07.28_NV_1.40_release_140444_signed"
I then tried unrEVOked 3.21 which SEEMED to work... I followed all onscreen prompts...
Plugged in my phone, ran the program, phone rebooted, selected HBOOT USB, Program reported that everything was going along nicely...even saw the program say waiting for root..."this was a triumph" Rebooted..then came back up to desktop...didnt reboot in recover like i have seen... the program then reverts to saying the thing about HBOOT USB.... there is NO SuperUser app and it is NOT rooted...
Please tell me where I went wrong...and what I need to do to fix it...
Info about MY Phone
Android Version 2.2
Baseband Version 2.15.00.07.28
Kernel 2.6.32.15-g746f4f0
Software Version 3.26.651.1
PLEASE help....I am having withdrawals lol...
***UPDATE***
Following this Guide
http://forum.xda-developers.com/showthread.php?t=829045
I made it to Step 19...then S#*+ went crazy...It appears that the recover did NOT flash...not really sure...I am now trying to RUU my phone back...and start over but it keeps saying the phone is low battery <30% and its NOT...I looked at 3 batterys on a Hero and it says all are over 70%...
and ..since im pretty sure this matters...with S-OFF
When I try to flash PC36IMG.zip Radio_V2 FAIL-PU and...Bootloader FAIL-IC is what I get...
ALL help greatly appreciated...thankfully I am off work the next two days...So I know I can get this resolved
Ok I have done a lot of reading that seems to indicate that I have no ROM or my ROM is Broken...and seeing as how RUU keeps saying my battery level is too low I am going to put it on the charger til the light turns green...Try to RUU in the Morning...
***SOMEONE PLEASE CORRECT ME IF I AM WRONG ***
I am under the impression that RUU'ing will NOT Turn S-ON and will Leave S-OFF
But will just load a ROM and allow me to boot in and then run unrEVOked and be on my merry rooted way...
If ANYONE knows that it will turn S-ON please stop me lol...I am going to stop trying for now and get some sleep... will check this post before continuing..
I seriously need help getting back to stock. I'm trying to use RUU 2.35. I double click and it acts like it's about to do something then the screen goes away and nothing happens.
Ok, I figured out why it wasn't allowing me to get passed that screen. But I have no encountered another problem. When it gets to the point where it verify's my android information, nothing shows up in the image version. I went through the rest of the steps, it said that it had failed. Please help, thanks.
Hboot needs to match, if you installed the jelly bean ota, you can't flash the 2.35 ruu because of the lower hboot version.
Have you flashed the standard recovery and re-locked the bootloader.
Why is my HTC One x (PROTOTYPE) stuck on ICS?
Hey guys, This is my first post ever on XDA so please forgive me if I sound like an idiot
I got hold of a HTC One x which was already had an unlocked bootloader, rooted and had CWM recovery installed. I was told that I have a prototype version of the one x. Anyway that is not issue. when I got the phone it was running android version 4.0.4 HTC Sense version 4.1 and I checked software update. The 3.14.401.27 OTA update was available so I proceeded with the update and after the reboot I found my phone stuck in a bootloop and the only way for me to sort it out was by restoring my nand back up from CWM. I really wanted the new Sense 5 UI and android jelly bean so I downloaded:
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_TW_3.14.709.20_Rad io_5.1204.162.29_release_292865_signed.exe
My CID was HTC__621 thats why I downloaded that ruu but after flashing it not was I only stuck in a bootloop but also when I entered recovery mode it was just a blank black screen with the back lights on. I even flashed different versions of CWM recovery and TWRP which gave me the same black screen so I flashed the stock recovery.img which also gave me the same black screen. I thought me maybe a different Ruu would resolve this issue so I used 'JBFWTOOL21' to change my CID to '11111111' this allowed me to flash:
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radi o_5.1204.162.29_release_298897_signed.exe
&
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Ra dio_5.1204.162.29_release_302015_signed.exe
After trying both these ruu's I still found my device stuck in a bootloop. Next I downloaded 'Endeavoru_CustomRUU' this contained a 'rom.zip' which I belive was a jelly bean rom and said it would update my image version to '3.14.401.31' after flashing this ruu, my phone booted up past the 'HTC Quietly Brilliant' screen but into a black screen but I could hear the boot sound and knew it booted up but it still gave me a black screen. barre in mind this was the only rom that booted up and didn't get stuck in a bootloop but the downside was I had no picture on the screen it was literally pitch black with the backlight on when it went past the 'HTC Quietly Brilliant' boot screen. I didn't even see the one x boot animation. I could only hear the boot up sound and once it was booted up the notification LED would flash I was receiving network settings from my operator. That was about it. I booted into recovery to see wether that worked but unfortunatelly it was also still giving me a black screen. The only thing I could boot into without a problem was 'power button + volume down' which booted into bootloader in which I chose 'fastboot' to flash all these roms.
At this point I thought my device was soft bricked so I gave it to my friends father who happened to really good with his IT skills. He managed to change my device's CID from 'HTC__621' to 'HTC__001' after doing so he downloaded this ruu and flashed it:
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radi o_2.1204.135.20_release_274900_signed.exe
This ruu turned out to work perfectly fine with my device. Everything functioned once again, the device was able to boot into recovery and boot normally without a hassle. I also discovered that this was the rom that I received my phone with which put me back to the start on android 4.0.4
I was really annoyed with the fact that I was stuck on ICS so I flashed the MaximusHD 21.1.0 rom and its boot.img which put me into a bootloop again. I also tried other custom roms such as Revolution and SD secxces which all put my phone in a bootloop even though I flashed their boot.img kernels. I knew that I required a hboot 1.33.0000 or above in order to flash jb roms so I used 'JBFWTOOL21' once again before flashing these custom roms to update my hboot from 1.12.0000 to 1.33.0000. so all these bootloops still occourd after doing all this and I just had to return back to ICS. barre in mind I only tried flashing JB roms as I want sense 5 so I don't know if a custom ics rom would work on my device as I havent tried it yet but I know for a full fact that none of the jb roms work on my device.
For those who are wondering here, I uploaded some pictures of my device just check the attachments. It has all the information you may want to know about my device (HTC One X PROTOTYPE).
I really hope someone can help me update to jelly bean and get sense 5 as I am frustrated from failing and being stuck in bootloops
If you read all of this I honestly appreciate it and Thank you for it, I hope you can help me!
Sorry to say it after you've written such a lengthy post, but you're in the wrong forum. This is the HTC One XL (at&t One x) forum, they're completely different phones. You'll need to ask in the HTC One X forum, we don't know enough about your phone here, sorry.
Sent from my Evita
Oh sorry about that :/
timmaaa said:
Sorry to say it after you've written such a lengthy post, but you're in the wrong forum. This is the HTC One XL (at&t One x) forum, they're completely different phones. You'll need to ask in the HTC One X forum, we don't know enough about your phone here, sorry.
Sent from my Evita
Click to expand...
Click to collapse
Sorry about that I didn't notice that I posted in the wrong forum. Thank you for letting me know, I will repost this in the correct forum
No worries.
Sent from my Evita
Hello guys, this is the 5th day since im messing my mind on this particular device, im out of ideas now, and thats why im creating this thread hoping someone will solve this puzzle out.
I was reading a lot of tutorials, tryed many diffrend ways to get S-off, or trying to get back to stock..
GOAL: make this One S work, being rooted and have s-off, and have custom rom with sense 5 on it.
Story: i bought this HTC ONE S as a used device on cheap price, it was looking terrible, damaged case, cracked glass, outdated rom.
but i got idea i have to buy this one, because i think HTC ONE S IS MOST PRETTY DEVICE I HAVE SEEN , i will do restoration and make this baby beautiful as new! I polished glass, put glass protection on, repainted whole case with new white car paint. (it was black color version) now i have beautiful WHITE edition of HTC ONE S. its not for resell or anything, just personal use. ( i will do photos later on, when i will finish this project).
I noticed this phone have custom rom on it, but it was kinda buggy and slow, and outdated, it was some modded ICS rom. i was thinking like: no problem, i just read some tutorials here and flash new fancy rom, it will take just a hour or so at most,
i though this will be easy cake... since i have samsung galaxy s3 and i flashed it many times without problems.
ohhh how wrong i was... i almost bricked this phone...
THE STAGE THIS PHONE IS NOW AT:
ITS AN S4 DEVICE,
it can boot in to HBOOT with no problems and it can be controlled from windows 7 with fastboot commands.
TAMPERED
UNLOCKED
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.12.50.05.05
OpenDSP-v31.1.0.45.0815
eMMC-boot
(date and clock)
Recovery also works
TWRP v2.6.3.0
it have sweet feature to mount internal sdcard as usb flash for windows, also file browser and so on.. really like this recovery.
last installed rom: cm-10-2.0.-ville.zip
(but it wont load of course)
but after it hangs on HTC logo, red lines about developer rom, ADB DEVICES command shows this device serial number and phone listens to ADB commands with windows cmd from SDK platform tools.
This device original CID was: ORANG001
i was trying to get supercid, and somehow i managed to make it 11111111, but i cant managed to install any original RUU, so later i tryed to change cid to O2___001, and install O2 RUU, but it still wont install.
now i cant change CID to 11111111, just wont work, i have no idea how i changed in first place. but i edited hex and now i cant push this file with supercid againt to phone, gives error. also fastboot write cid wont work to, ends up in error and flastboot frozes, need to reset by holding power key.
so now im stuck with CID: O2___001
soo... can somebody give me some instructions how to get out of this crazyness and make this sweet phone work again by having Maximus HD on it? thank you
Saiyaru said:
Hello guys, this is the 5th day since im messing my mind on this particular device, im out of ideas now, and thats why im creating this thread hoping someone will solve this puzzle out.
I was reading a lot of tutorials, tryed many diffrend ways to get S-off, or trying to get back to stock..
GOAL: make this One S work, being rooted and have s-off, and have custom rom with sense 5 on it.
Story: i bought this HTC ONE S as a used device on cheap price, it was looking terrible, damaged case, cracked glass, outdated rom.
but i got idea i have to buy this one, because i think HTC ONE S IS MOST PRETTY DEVICE I HAVE SEEN , i will do restoration and make this baby beautiful as new! I polished glass, put glass protection on, repainted whole case with new white car paint. (it was black color version) now i have beautiful WHITE edition of HTC ONE S. its not for resell or anything, just personal use. ( i will do photos later on, when i will finish this project).
I noticed this phone have custom rom on it, but it was kinda buggy and slow, and outdated, it was some modded ICS rom. i was thinking like: no problem, i just read some tutorials here and flash new fancy rom, it will take just a hour or so at most,
i though this will be easy cake... since i have samsung galaxy s3 and i flashed it many times without problems.
ohhh how wrong i was... i almost bricked this phone...
THE STAGE THIS PHONE IS NOW AT:
ITS AN S4 DEVICE,
it can boot in to HBOOT with no problems and it can be controlled from windows 7 with fastboot commands.
TAMPERED
UNLOCKED
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.12.50.05.05
OpenDSP-v31.1.0.45.0815
eMMC-boot
(date and clock)
Recovery also works
TWRP v2.6.3.0
it have sweet feature to mount internal sdcard as usb flash for windows, also file browser and so on.. really like this recovery.
last installed rom: cm-10-2.0.-ville.zip
(but it wont load of course)
but after it hangs on HTC logo, red lines about developer rom, ADB DEVICES command shows this device serial number and phone listens to ADB commands with windows cmd from SDK platform tools.
This device original CID was: ORANG001
i was trying to get supercid, and somehow i managed to make it 11111111, but i cant managed to install any original RUU, so later i tryed to change cid to O2___001, and install O2 RUU, but it still wont install.
now i cant change CID to 11111111, just wont work, i have no idea how i changed in first place. but i edited hex and now i cant push this file with supercid againt to phone, gives error. also fastboot write cid wont work to, ends up in error and flastboot frozes, need to reset by holding power key.
so now im stuck with CID: O2___001
i would like to get step instructions what i should try do now, like guiding me trough steps on actions, and i will report how phone responds, and making this phone alive again ?
Click to expand...
Click to collapse
Saiyaru said:
Hello guys, this is the 5th day since im messing my mind on this particular device, im out of ideas now, and thats why im creating this thread hoping someone will solve this puzzle out.
I was reading a lot of tutorials, tryed many diffrend ways to get S-off, or trying to get back to stock..
GOAL: make this One S work, being rooted and have s-off, and have custom rom with sense 5 on it.
Story: i bought this HTC ONE S as a used device on cheap price, it was looking terrible, damaged case, cracked glass, outdated rom.
but i got idea i have to buy this one, because i think HTC ONE S IS MOST PRETTY DEVICE I HAVE SEEN , i will do restoration and make this baby beautiful as new! I polished glass, put glass protection on, repainted whole case with new white car paint. (it was black color version) now i have beautiful WHITE edition of HTC ONE S. its not for resell or anything, just personal use. ( i will do photos later on, when i will finish this project).
I noticed this phone have custom rom on it, but it was kinda buggy and slow, and outdated, it was some modded ICS rom. i was thinking like: no problem, i just read some tutorials here and flash new fancy rom, it will take just a hour or so at most,
i though this will be easy cake... since i have samsung galaxy s3 and i flashed it many times without problems.
ohhh how wrong i was... i almost bricked this phone...
THE STAGE THIS PHONE IS NOW AT:
ITS AN S4 DEVICE,
it can boot in to HBOOT with no problems and it can be controlled from windows 7 with fastboot commands.
TAMPERED
UNLOCKED
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.12.50.05.05
OpenDSP-v31.1.0.45.0815
eMMC-boot
(date and clock)
Recovery also works
TWRP v2.6.3.0
it have sweet feature to mount internal sdcard as usb flash for windows, also file browser and so on.. really like this recovery.
last installed rom: cm-10-2.0.-ville.zip
(but it wont load of course)
but after it hangs on HTC logo, red lines about developer rom, ADB DEVICES command shows this device serial number and phone listens to ADB commands with windows cmd from SDK platform tools.
This device original CID was: ORANG001
i was trying to get supercid, and somehow i managed to make it 11111111, but i cant managed to install any original RUU, so later i tryed to change cid to O2___001, and install O2 RUU, but it still wont install.
now i cant change CID to 11111111, just wont work, i have no idea how i changed in first place. but i edited hex and now i cant push this file with supercid againt to phone, gives error. also fastboot write cid wont work to, ends up in error and flastboot frozes, need to reset by holding power key.
so now im stuck with CID: O2___001
soo... can somebody give me some instructions how to get out of this crazyness and make this sweet phone work again by having Maximus HD on it? thank you
Click to expand...
Click to collapse
Well lest start shall we...
First find stock or close to stock ROM like sourcE
Then find the tool rumrunner and s-off
once your s-off your going to flash the ROM first then update firmware in maximus But before that back up your SD your going to have to wipe it
Now if you get a bootloop your going to have to adb push the ROM to your phone I hope this helps you
Sent from my Nexus 7 using Xparent Red Tapatalk 2
Flashalot said:
Well lest start shall we...
First find stock or close to stock ROM like sourcE
Then find the tool rumrunner and s-off
once your s-off your going to flash the ROM first then update firmware in maximus But before that back up your SD your going to have to wipe it
Now if you get a bootloop your going to have to adb push the ROM to your phone I hope this helps you
Sent from my Nexus 7 using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
ty for helping ;D
ok, i installed SourcE 1.4 zip trough recovery, and did cache, dalvic wipe, but after system reboot, i got boot loop. also ADB wont show device number, so its even less wants to boot as with Cyanogen mod roms. they also get boot loop but atleast ADB shows device number after sending command adb devices.
ok, i will simply try now do s-off like i would do by tutorial, and tell u where i get stuck.
Hello everyone,
I've got a few HTC One SV devices in front of me, which got the "Robot Voice Bug". Since that is a problem of the 4.2.2 Android I decided to "downgrade" them to a previous Version.
To do this I have to S-Off the devices, which is the step I so far failed to do.
I am not at home and only got a Win10 laptop available with an antiX Live-USB stick.
After installing VenomSV 1.5 on the first device (K2_UL) I decided to give it a try and used mooonshine to S-Off it.
It did go through the testing but got stuck at moonshining (ERROR: Don't drink and shine (if I remember correctly, it tried to moonshine 10 times and stopped afterwards)).
Now it is just booting to the Quietly Brilliant screen with the red text underneath.
But I am still able to get into the TWRP Recovery. I tried to wipe it and install VenomSV again, but without effect (I can go through the installation until I have to restart).
I've also got a TWRP backup of the stock system, but TWWRP doesn't recognize it.
Is there any chance for reviving this device?
And even if not:
Is there a way to downgrade without S-Off? Or maybe a hint what could have gone wrong moonlighting the device?
Some system information:
K2_UL PVT SHIP S-ON
HBOOT-1.01.0000
RADIO-0.12.40.00.14_2
If you do need any more information feel free to ask.
Thank you in advance for any answer,
maj0r_tom
PS: Sorry for the bad english.