[GUIDE]
How to compile PhilZ Touch 6 Recovery
CWM Advanced Edition 6.x
With Part-Source using prebuilt kernel for any android devices
Intro
PhilZ Touch is developed by XDA Recognized Developer Phil3759, it is open source & you can compile it on your own.
Video Preview
You don't need to have a PHD in computer science to build from source.
This guide details the whole process for building PhilZ Touch recovery for MediaTek SoC & it should work on any other android devices that uses ARM architecture.
This guide's aim is to provide enthusiast who would like to try their hands on building PhilZ Touch from source but was turn off by the huge cm repo size. There are hundreds if not thousands of android devices that doesn't have CyanogenMod BUT you can still build PhilZ Touch recovery !
Many have no choice but to download full cm source & many has successfully built PhilZ Touch in spite of it.
As of today the month of Aug 2014, cm-11.0 repo has grow to 473 projects with the total of more than 12GB & this is only the compress hidden folder .repo
When the files are extracted, the whole ~/cm11 folder will be double the size !
Now you don't have to worry about that anymore, the projects for building PhilZ Touch has been identified & you only need 40 of the cm projects instead of the complete 473 & the size of .repo now for building PhilZ Touch is only 1.7GB. Conclusion, you don't need the extra 10.5GB from full source to build PhilZ Touch since your device doesn't have CyanogenMod !
Most important requirement : Willingness to learn, READ, continue reading, continue trying, stop asking questions all the time as most of your questions has already been answered, google it & most importantly, self-taught by looking at various example here. Look for the same SoC closes siblings to your device for recovery.fstab & BoardConfig.mk & compare it with yours.
However, when you have already gone through all that & still couldn't find an answer then ask or you'll never know . . . :laugh:
Always refer to the main thread here plenty of infos . . . :good:
Step 1
How to start
There are already plenty of guides so i won't touch on it, refer to the below on how to get started . . .
How to install Virtualbox on Windows
Download the latest x64 BBQLinux
Getting Started with BBQLinux
WARNING
Always make a backup of your device Factory ROM first with MTK Droid Root & Tools, my old guide here
Lock Bootloaders device then you can forget about building PhilZ Touch from source . . . :laugh:
Step 2
Syncing Part-Source
Updates -> Refer to this post . . .
Download & unzip the script to your [HOME]. Start Mate Terminal & follow below command.
Code:
chmod 777 ~/PhilZ
./PhilZ [COLOR="Red"]<- Execute it by typing [COLOR="Blue"]dot forward-slash PhilZ[/COLOR][/COLOR]
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can stop the script at any time by pressing Ctrl + z
To resume then execute the script again.
Misc Tips
Pls be patient, first sync will take quite awhile depending on your ISP
Screenshot of Part-Source script when finish syncing
You can also drag & drop it from your host OS
View attachment 2918982
Pull your MTK device boot.img directly to BBQLinux then you have to enable the USB port on Virtualbox first.
Check your MT65xx_Android_scatter.txt for boot or recovery partition size
Code:
- partition_index: SYS9
partition_name: BOOTIMG
file_name: [COLOR="blue"]boot.img[/COLOR]
is_download: true
type: NORMAL_ROM
linear_start_addr: 0x1DA0000
physical_start_addr: 0x1DA0000
partition_size: 0x[COLOR="blue"]A00000[/COLOR]
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00
- partition_index: SYS10
partition_name: RECOVERY
file_name: [COLOR="blue"]recovery.img[/COLOR]
is_download: true
type: NORMAL_ROM
linear_start_addr: 0x27A0000
physical_start_addr: 0x27A0000
partition_size: [COLOR="Blue"]0x1400000[/COLOR]
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00
You can also use adb shell cat /proc/dumchar_info to check too.
Code:
[COLOR="blue"]Part_Name Size StartAddr Type MapTo[/COLOR]
bootimg 0x0000000000[COLOR="blue"]A00000[/COLOR] 0x0000000001DA0000 2 /dev/block/mmcblk0
recovery 0x000000000[COLOR="blue"]1400000[/COLOR] 0x00000000027A0000 2 /dev/block/mmcblk0
Use Calculator or Online Hex to Dec & convert it to decimal.
0xA00000 = 10485760
0x1400000 = 20971520
Click to expand...
Click to collapse
Code:
adb shell "dd if=/dev/[COLOR="Blue"]bootimg[/COLOR] of=/mnt/sdcard/[COLOR="blue"]boot.img[/COLOR] bs=[COLOR="blue"]10485760[/COLOR] count=1"
adb pull /mnt/sdcard/[COLOR="blue"]boot.img[/COLOR]
adb shell rm /mnt/sdcard/[COLOR="blue"]boot.img[/COLOR]
[COLOR="blue"]OR[/COLOR]
adb shell "dd if=/dev/[COLOR="blue"]recovery[/COLOR] of=/mnt/sdcard/[COLOR="blue"]recovery.img[/COLOR] bs=[COLOR="blue"]20971520[/COLOR] count=1"
adb pull /mnt/sdcard/[COLOR="blue"]recovery.img[/COLOR]
adb shell rm /mnt/sdcard/[COLOR="blue"]recovery.img[/COLOR]
Step 3
Setting up the files
Now that you have sync the Part-Source, you will need to use mkvendor.sh to generate the skeleton files for building PhilZ Touch.
Copy your device boot.img or recovery.img to [HOME]
cd ~/cm11
build/tools/device/mkvendor.sh vendor_name device_name ~/boot.img
OR
build/tools/device/mkvendor.sh vendor_name device_name ~/recovery.img
Eg. build/tools/device/mkvendor.sh Lenovo S939 ~/boot.img
Click to expand...
Click to collapse
mkvendor.sh will auto-generate eight files for your device needed for building PhilZ Touch
AndroidBoard.mk
AndroidProducts.mk
BoardConfig.mk
cm.mk
device_device_name.mk
kernel
recovery.fstab
system.prop
Click to expand...
Click to collapse
Screenshot of mkvendor.sh
You need to edit the files as listed below only. Below are examples, do not copy & paste, refer to here & here.
Put all PhilZ Touch build flags at the bottom of the BoardConfig.mk under a heading of #PhilZ Touch build flags for easy reference
~/cm11/device/Lenovo/S939/BoardConfig.mk
Code:
USE_CAMERA_STUB := true
# inherit from the proprietary version
-include vendor/Lenovo/S939/BoardConfigVendor.mk
TARGET_ARCH := arm
TARGET_NO_BOOTLOADER := true
TARGET_BOARD_PLATFORM := unknown [COLOR="red"]<- Non-critical, you can either leave it as it is or change to any name[/COLOR]
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_CPU_VARIANT := cortex-a7 [COLOR="red"]<- Critical, either cortex-a5, cortex-a7, cortex-a8, cortex-a9, cortex-a15, krait, scorpion or generic[/COLOR]
TARGET_CPU_SMP := true
ARCH_ARM_HAVE_TLS_REGISTER := true
TARGET_BOOTLOADER_BOARD_NAME := S939
BOARD_KERNEL_CMDLINE :=
BOARD_KERNEL_BASE := 0x10000000
BOARD_KERNEL_PAGESIZE := 2048
# fix this up by examining /proc/mtd on a running device
BOARD_BOOTIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_RECOVERYIMAGE_PARTITION_SIZE := [COLOR="Blue"]0x1400000[/COLOR] [COLOR="red"]<- Change this accordingly to your recovery size so that build will error when its oversize[/COLOR]
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_USERDATAIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_FLASH_BLOCK_SIZE := 131072
TARGET_PREBUILT_KERNEL := device/Lenovo/S939/kernel
BOARD_HAS_NO_SELECT_BUTTON := true
[COLOR="Blue"]#PhilZ Touch build flags for MTK[/COLOR]
TARGET_COMMON_NAME := Lenovo S939
BOARD_USE_MTK_LAYOUT := true
BOARD_MTK_BOOT_LABEL := "/bootimg"
BOARD_USE_NTFS_3G := false
BRIGHTNESS_SYS_FILE := "/sys/class/leds/lcd-backlight/brightness"
TARGET_USE_CUSTOM_LUN_FILE_PATH := "/sys/devices/virtual/android_usb/android0/f_mass_storage/lun%d/file" [COLOR="Red"]<- Credits to [B][COLOR="Black"]RD[/COLOR][/B] [URL="https://github.com/chrmhoffmann/android_device_wiko_stairway/blob/cm-11.0/BoardConfig.mk#L79"][U]chrmhoffmann[/U][/URL][/COLOR]
TARGET_SCREEN_HEIGHT := 1280
TARGET_SCREEN_WIDTH := 720
BOARD_CUSTOM_BOOTIMG_MK := device/Lenovo/S939/boot.mk [COLOR="Red"]<- Credits to [B][COLOR="Black"]RD[/COLOR][/B] [URL="http://forum.xda-developers.com/showthread.php?t=2676086"][U]chrmhoffmann[/U][/URL]. [B][COLOR="Black"]MTK[/COLOR][/B] uses custom [COLOR="Blue"]mkbootimg[/COLOR][/COLOR]
~/cm11/device/Lenovo/S939/cm.mk
Code:
## Specify phone tech before including full_phone
$(call inherit-product, vendor/cm/config/gsm.mk)
# Release name
PRODUCT_RELEASE_NAME := S939
# Inherit some common CM stuff.
[COLOR="Red"]#[/COLOR]$(call inherit-product, vendor/cm/config/common_full_phone.mk) [COLOR="red"]<- Disable it to use this Part-Source or ERROR 1. You don't need this for building [COLOR="blue"]PhilZ Touch[/COLOR][/COLOR]
# Inherit device configuration
$(call inherit-product, device/Lenovo/S939/device_S939.mk)
## Device identifier. This must come after all inclusions
PRODUCT_DEVICE := S939
PRODUCT_NAME := cm_S939
PRODUCT_BRAND := Lenovo
PRODUCT_MODEL := S939
PRODUCT_MANUFACTURER := Lenovo
~/cm11/device/Lenovo/S939/recovery.fstab
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
/dev/bootimg /bootimg emmc defaults defaults
/dev/recovery /recovery emmc defaults defaults
/dev/uboot /uboot emmc defaults defaults
/[email protected] /system ext4 ro,noatime wait
/[email protected] /cache ext4 noatime,nosuid,nodev,noauto_da_alloc wait
/[email protected] /data ext4 noatime,nosuid,nodev,noauto_da_alloc wait,encryptable=footer
/devices/platform/mtk-msdc.0/mmc_host/mmc0 auto vfat defaults voldmanaged=sdcard0:[COLOR="Blue"]4[/COLOR] [COLOR="red"]<- Change accordingly to your [B][COLOR="Black"]MTK[/COLOR][/B] fat partition no.[/COLOR]
/devices/platform/mtk-msdc.1/mmc_host/mmc1 auto vfat defaults voldmanaged=sdcard1:auto
~/cm11/device/Lenovo/S939/device_S939.mk
Code:
$(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk)
# The gps config appropriate for this device
[COLOR="Red"]#[/COLOR]$(call inherit-product, device/common/gps/gps_us_supl.mk) [COLOR="Red"]<- Disable it to use this Part-Source or ERROR 1.[/COLOR]
$(call inherit-product-if-exists, vendor/Lenovo/S939/S939-vendor.mk)
DEVICE_PACKAGE_OVERLAYS += device/Lenovo/S939/overlay
LOCAL_PATH := device/Lenovo/S939
ifeq ($(TARGET_PREBUILT_KERNEL),)
LOCAL_KERNEL := $(LOCAL_PATH)/kernel
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif
PRODUCT_COPY_FILES +=
$(LOCAL_KERNEL):kernel
$(call inherit-product, build/target/product/full.mk)
PRODUCT_BUILD_PROP_OVERRIDES += BUILD_UTC_DATE=0
PRODUCT_NAME := full_S939
PRODUCT_DEVICE := S939
[STRIKE][COLOR="Blue"]#PhilZ Touch[/COLOR]
PRODUCT_COPY_FILES +=
$(LOCAL_PATH)/recovery.fstab:recovery/root/fstab.[COLOR="blue"]mt6592[/COLOR] [COLOR="Red"]<- adb shell getprop ro.hardware to identify it.[/STRIKE][/color]
Updates
Above PRODUCT_COPY_FILES doesn't work anymore, just create a new folder recovery/root at your device tree & copy fstab.${ro.hardware} to it & it'll auto copy fstab.${ro.hardware} to root of ramdisk . For this Eg. : ~/cm11/device/Lenovo/S939/recovery/root/fstab.mt6592. Credits : Master Shifu Carliv
Custom mkbootimg
~/cm11/device/Lenovo/S939/boot.mk
Credits to Chris Hoffmann AKA RD chrmhoffmann , now you can automate the whole build process, no need to unpack/ repack after building !
Code:
define make_header
perl -e 'print pack("a4 L a32 a472", "x88x16x88x58", $$ARGV[0], $$ARGV[1], "xFF"x472)' $(1) $(2) > $(3)
endef
$(recovery_ramdisk).mtk.header: $(recovery_ramdisk)
size=$$($(call get-file-size,$(recovery_ramdisk)));
$(call make_header, $$((size)), "RECOVERY", [email protected])
$(recovery_ramdisk).mtk: $(MKBOOTIMG) $(recovery_ramdisk).mtk.header
$(call pretty,"Adding MTK header to recovery ramdisk.")
cat $(recovery_ramdisk).mtk.header $(recovery_ramdisk) > [email protected]
INTERNAL_MTK_RECOVERYIMAGE_ARGS :=
--kernel $(PRODUCT_OUT)/[COLOR="Blue"]kernel[/COLOR]
--ramdisk $(recovery_ramdisk).mtk
$(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTIMG)
$(recovery_ramdisk).mtk $(PRODUCT_OUT)/[COLOR="Blue"]kernel[/COLOR]
@echo -e ${CL_CYN}"----- Making recovery image ------"${CL_RST}
$(MKBOOTIMG) $(INTERNAL_MTK_RECOVERYIMAGE_ARGS)
$(BOARD_MKBOOTIMG_ARGS) --output [email protected]
$(hide) $(call assert-max-image-size,[email protected],
$(BOARD_RECOVERYIMAGE_PARTITION_SIZE),raw)
@echo -e ${CL_CYN}"Made recovery image: [email protected]"${CL_RST}
Step 4
Start Building it !
Below are the commands to build, thats it !
Code:
cd ~/cm11
export USE_CCACHE=1
prebuilts/misc/linux-x86/ccache/ccache -M 50G
source build/envsetup.sh
lunch cm_[COLOR="Blue"]S939[/COLOR]-eng [COLOR="Red"]<- Change accordingly to your [COLOR="Blue"]device_name[/COLOR][/COLOR]
make -j8 recoveryimage
Video Preview
Misc Tips
First build will take quite awhile, pls be patient however subsequence build will be quick b'cos of ccache.
if you hate cli like i do then you can automate it, no need to type it every time since you are building for the same device that you own.
Use geany & fill in the commands accordingly to your device.
Make it executable by right-click at the file name -> Properties -> Permissions -> Put a Tick at Allow executing file as program. Execute it by typing ./s939 or whatever your file name is.
GNU make
GNU make can handle parallel tasks with a -j# argument.
Code:
make -j[COLOR="Blue"]#[/COLOR] recoveryimage
Replace the # with the core count +1, so if you have a dual core it's -j3 and a quad core becomes -j5, etc.
Above is applicable for Native-Boot, on Virtualbox -j8 will work even if you have the old Pentium II except your host OS will lag.
Code:
make -j8 recoveryimage 2>&1 | tee ~/Documents/compile.log
You can also use above command so that you can refer to the compile.log for error checking.
Subsequent Build
Refer to post #2 -> Misc Tips -> Make clean before each recompiling or your flag changes will not be picked up !
Step 5
Push it directly to your device
Screenshot of Build Completed
Screenshot of adb push
Code:
adb push ~/cm11/out/target/product/[COLOR="red"]S939[/COLOR]/recovery.img /mnt/sdcard
adb shell "dd if=/mnt/sdcard/recovery.img of=/dev/recovery"
adb reboot recovery
Misc Tips
You can also use Flashify or Mobileuncle to install it too.
Congrats, now you have compiled & install PhilZ Touch to your MTK device . . . :good:
Notes about 4.4 Kit Kat ROMs and SELinux
Mostly new android devices doesn't provide kernel source so you need to unpack your stock recovery or stock ROM, manually copy file_contexts, property_contexts & seapp_contexts to replace the one at PhilZ Touch, repack it back to fully support SELinux backup & restore.
No need to replace sepolicy as this binary is built with the latest source. On top of that, sepolicy from stock recovery.img mostly are oudated & the size is huge compare to the one from PhilZ Touch but that is entirely up to you whether to use either one.
XDA members that has success in building PhilZ Touch for any other android devices please share your experience & tips here too so that this will help out others when they face the same problem . . . :good:
Source
Confirmed working PhilZ Touch using this guide(mkvendor.sh technique)
All MediaTek(MT65xx) devices
LG L90(msm8226) thanks to shoxxy
Hopefully with this guide, many will be able to kick-start development & port a working PhilZ Touch to their android devices.
Updates 09 April 2016
Its been awhile i've never build PhilZ Touch & as Phil3759 says, her source is solid rock & can be build to support many legacy devices & also new devices too, there has been confirmation that it still works on Android-6.0 Marshmellow too... :good:
Only found out that it doesn't build today & since Phil3759 has retired from this project, as usual, you'll need to revert commits to make it build again....
Code:
cd ~/cm11/system/core
git revert --no-edit [URL="https://github.com/CyanogenMod/android_system_core/commit/6bac0a9fedc711a7dfacd6865ec4923dd332182b"]6bac0a9fedc711a7dfacd6865ec4923dd332182b[/URL]
XDA:DevDB Information
Compile PhilZ Touch from source using BBQLinux Distro, Tool/Utility for all devices (see above for details)
Contributors
yuweng, Phil3759
Source Code: https://github.com/PhilZ-cwm6/philz_touch_cwm6
Version Information
Status: Stable
Current Stable Version: 6.59.0
Stable Release Date: 2014-10-14
Created 2014-08-30
Last Updated 2016-04-08
BoardConfig.mk optional build flags
You can always find all the detail for building PhilZ Touch with optional build flags here & available screen resolutions here . . . :good: If your screen res is not available then choose the one nearest to your device res.
Others undocumented flags such as below can be found here
Code:
BATTERY_LEVEL_PATH
BOARD_POST_UNBLANK_COMMAND
RECOVERY_TOUCHSCREEN_SWAP_XY
RECOVERY_TOUCHSCREEN_FLIP_X
RECOVERY_TOUCHSCREEN_FLIP_Y
BOARD_USE_B_SLOT_PROTOCOL
BOARD_HAS_NO_FB2PNG
BOARD_RECOVERY_BLDRMSG_OFFSET
ENABLE_LOKI_RECOVERY
BOARD_CUSTOM_RECOVERY_KEYMAPPING
BOARD_CUSTOM_RECOVERY_UI
TARGET_USERIMAGES_USE_F2FS
BOARD_USES_BML_OVER_MTD
TARGET_USERIMAGES_USE_F2FS
NO_AROMA_FILE_MANAGER
To use any of these optional build flags, typically is just to add a true at the back
Eg : BOARD_HAS_NO_FB2PNG : = true to your BoardConfig.mk
Flags like BRIGHTNESS_SYS_FILE obviously then you'll need to find out the path ONLY when it doesn't work. For most android devices BRIGHTNESS_SYS_FILE := "/sys/class/backlight/panel/brightness" should work.
Use adb shell su -c "ls -R" > myandroid.txt to find out where is your BRIGHTNESS_SYS_FILE. This command will list out your whole android device directory so it shall give you some clues for the lun file path needed to mount both the sdcard too, typically this will work for most devices.
Below flags is to set different graphics modes that may be needed to correct colours on some devices. Use only when your compiled PhilZ Touch has some weird looking colours or graphics & try one at a time but not all at the same time !
Code:
TARGET_RECOVERY_PIXEL_FORMAT := "BGRA_8888"
TARGET_RECOVERY_PIXEL_FORMAT := "RGBX_8888"
TARGET_RECOVERY_PIXEL_FORMAT := "RGB_565"
Note
If your kernel doesn't support NTFS-3G then you must use this build flag BOARD_USE_NTFS_3G := false or your compiled PhilZ Touch most probably won't boot
recovery.fstab
PhilZ Touch uses recovery.fstab v2 & if you use recovery.fstab v1 then most probably it won't boot.
Always refer to here to look for the closes siblings to your device.
If your device doesn't have any cm tree, you can still find out alot of info from your stock recovery.img. Use Repack Utils or Android Image Kitchen to unpack your stock recovery.img & look at /etc/recovery.fstab to look for clues . . . :good: Unpack PhilZ Touch built by other DEV too & see how they did it . . . google is your best friend so hunt for it.
Typically you'll only need to backup boot, system, data & cache partition only. Later when you have succeeded in building PhilZ Touch for your device then you can add other optional partition. Typically basic recovery.fstab is good enough, it will be able to restore your device back to a working state. You will also need to identify the correct internal & external sdcard path too so that PhilZ Touch can make backup to either one. Note : This is not the same path as BoardConfig.mk refer to this Eg. here.
Use adb commands such as below to find out more about your device partition . . .
Code:
adb shell cat /proc/partitions
adb shell cat /proc/mtd
adb shell cat /proc/emmc
adb shell cat /proc/dumchar_info
adb shell cat /proc/cmdline
adb shell cat /proc/mounts
adb shell cat /proc/devices
adb shell ls -al /dev/block
adb shell df
If your device already have a working CWM then you can also check the existing recovery.fstab by rebooting to recovery & use below command.
Code:
adb shell cat /etc/recovery.fstab
Updates
adb shell su -c "ls -R" > myandroid.txt will tell you alot of infos regarding your device. Just found out on MTK, below can also be use for PhilZ Touch.
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/bootimg /bootimg emmc defaults defaults
/dev/recovery /recovery emmc defaults defaults
/dev/uboot /uboot emmc defaults defaults
[COLOR="Blue"]/dev/block/platform/mtk-sd.0/by-num/p3[/COLOR] /system ext4 ro,noatime wait
[COLOR="blue"]/dev/block/platform/mtk-sd.0/by-num/p4[/COLOR] /cache ext4 noatime,nosuid,nodev,noauto_da_alloc wait
[COLOR="blue"]/dev/block/platform/mtk-sd.0/by-num/p5[/COLOR] /data ext4 noatime,nosuid,nodev,noauto_da_alloc wait,encryptable=footer
[COLOR="blue"]/dev/block/platform/mtk-sd.0/by-num/p6[/COLOR] auto vfat defaults voldmanaged=sdcard0:auto
[COLOR="blue"]/dev/block/platform/mtk-sd.1/by-num/p1[/COLOR] auto vfat defaults voldmanaged=sdcard1:auto
OR
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/bootimg /bootimg emmc defaults defaults
/dev/recovery /recovery emmc defaults defaults
/dev/uboot /uboot emmc defaults defaults
[COLOR="blue"]/dev/block/mmcblk0p3[/COLOR] /system ext4 ro,noatime wait
[COLOR="blue"]/dev/block/mmcblk0p4[/COLOR] /cache ext4 noatime,nosuid,nodev,noauto_da_alloc wait
[COLOR="blue"]/dev/block/mmcblk0p5[/COLOR] /data ext4 noatime,nosuid,nodev,noauto_da_alloc wait,encryptable=footer
[COLOR="blue"]/dev/block/mmcblk0p6[/COLOR] auto vfat defaults voldmanaged=sdcard0:auto
[COLOR="blue"]/dev/block/mmcblk1p1[/COLOR] auto vfat defaults voldmanaged=sdcard1:auto
WARNING
This could be the single most important part when it comes to building PhilZ Touch recovery.
If you wrongly use the path for recovery.fstab the outcome could be disasterous !
GIGO so please do some research first, you have been fore-warned . . .
Part-Source
i wrote this simple script that will only sync the needed projects for building PhilZ Touch, no matter how cm projects grows it will still sync only the 40 needed projects . . .
As mentioned at the script, if it doesn't build then obviously some of the remove projects are needed then look for clues at the build ERROR1.
There are two methods to rectify it. Eg. If the build ERROR1 something about bash . . .
Method 1
Open ~/cm11/.repo/local_manifests/local_manifest.xml, look for any keyword bash & add remarks as below or just delete that whole line, do a repo sync again & it will download & auto-extract it to ~/cm11/external/bash
Code:
[COLOR="blue"]<!--[/COLOR] <remove-project name="CyanogenMod/android_external_bash" /> [COLOR="blue"]-->[/COLOR]
Method 2
Open PhilZ script, add as below to Line 22, run the script again & it will do everything automatically for you . . .
Code:
grep -v [COLOR="blue"]bash[/COLOR] ~/Documents/x>~/Documents/x.tmp;mv ~/Documents/x.tmp ~/Documents/x
You can also add additional needed projects to Line 82 too, just follow Line 81 for reference . . .
ARM11
ARM11 AKA ARMv6 boots on PhilZ Touch too, thanks to the androidarmv6 development team . . . :good:
Add the below to Line 82, delete whole ~/cm11/bionic folder, add a # remark to bionic & execute PhilZ script to sync the Part-Source needed to build for arm11 devices
Code:
echo -e "<project path=\"bionic\" name=\"androidarmv6/android_bionic\" revision=\"cm-11.0\" />" >> ~/Documents/x
Code:
[COLOR="Red"]#[/COLOR]grep -v bionic ~/Documents/x>~/Documents/x.tmp;mv ~/Documents/x.tmp ~/Documents/x
You will also need to edit BoardConfig.mk as below for compiling PhilZ Touch for arm11 devices
Code:
TARGET_CPU_ABI := [COLOR="blue"]armeabi-v6l[/COLOR]
TARGET_ARCH_VARIANT := [COLOR="blue"]armv6-vfp[/COLOR]
TARGET_CPU_VARIANT := [COLOR="blue"]arm11[/COLOR]
[COLOR="Red"]#[/COLOR]ARCH_ARM_HAVE_TLS_REGISTER := true [COLOR="blue"]<- Most [COLOR="Blue"]arm11[/COLOR] devices doesn't have [URL="http://arowboat.wordpress.com/2011/08/10/android-linux-arm-and-tls-register-emulation/"]TLS[/URL] & if you enable it then it won't boot ![/COLOR]
Syncing Part-Source on Ubuntu or other Distro
Open Terminal & type export PATH=~/bin:$PATH first then only it'll sync correctly provided you have setup the BE correctly BUT don't come ERROR reporting here as this thread details building PhilZ Touch on BBQLinux only . . .
You are completely on your own so please look for solutions here or hunt for similar solutions here on XDA, tons of guides for building on Ubuntu & other distro . . .
Why use other Distro when you have BBQLinux which is specifically made for Android development by codeworkx . . . :good:
Build cm kernel
If your device have cm kernel source then un-remark Line 68, 69 & update the necessary device specific flags, defconfig & SELinux . . .
Misc Tips
Factory ROM Back Up
Always google & research how to make a Factory ROM back up for your device & always make at least x3 so that in case one corrupted, you still have another two . . .
Typically, you'll find all these infos at your vendors website such as Sony Devices, HTC Devices, Samsung Devices & etc.
Many vendors also offer firmware updates too at their website such as Motorola & you should have a copy before even starting modding your device !
Files from vendor
To be able to install update.zip from your vendor then you'll need to do some minor editing.
Code:
adb shell "getprop ro.product.model"
adb shell "getprop ro.product.device"
or refer to your build.prop for
Code:
ro.product.model=[COLOR="blue"]Lenovo S939[/COLOR]
ro.product.device=[COLOR="blue"]S939[/COLOR]
and update it accordingly to default.prop at compiled PhilZ Touch
Alternate commands
For building recovery
Code:
cd ~/cm11
export USE_CCACHE=1
prebuilts/misc/linux-x86/ccache/ccache -M 50G
source build/envsetup.sh
source build/tools/device/makerecoveries.sh cm_[COLOR="Red"]S939[/COLOR]-eng [COLOR="Blue"]<- Change accordingly to your [COLOR="red"]device_name[/COLOR][/COLOR][COLOR="Blue"]
OR[/COLOR]
lunch cm_[COLOR="Blue"]S939[/COLOR]-eng [COLOR="Red"]<- Change accordingly to your [COLOR="blue"]device_name[/COLOR][/COLOR]
mka recoveryimage [COLOR="blue"]<- Thanks to [B]RD[/B] [URL="http://forum.xda-developers.com/showpost.php?p=55295969&postcount=15"]PlayfulGod[/URL]. More info [URL="http://wiki.cyanogenmod.org/w/Envsetup_help#mka"]refer to here[/URL][/COLOR]
Sync corruption
git & repo is like a Super Intelligent Source Code Auto-Resume Downloader when working together . . . :good:
You can stop it at any time, restart it back & it will auto-resume.
cm-11.0 repo & source code is located at ~/cm11/.repo, it is a hidden folder & to view hidden folder via caja, you need to press Ctrl + h
Sometimes you have corruption then repo sync wouldn't work & normally you just need to delete manifests, manifests.git, manifests.xml with a repo init & repo sync then you'll be back to normal.
If still this doesn't solve the problem then delete everything EXCEPT the folder project-objects & projects, both of this is the actual source code folder.
After this a repo init then repo sync & everything will be back to normal, i guarantee, done this many times, no worries . . . :laugh:
Make a secondary HDD & backup this hidden folder .repo & in case of OS corruption then you can anytime just copy it back to ~/cm11/.repo, repo init, repo sync & you'll have the whole cm-11.0 source code in a few minutes, no need to download it all over again. Make a backup of your bbqlinux.vdi too . . . :good:
Code:
cd ~/cm11
repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
repo sync -f -j8 [COLOR="Red"]<- You can increase this to parallel download but if ERROR then lower it[/COLOR]
git checkout
git & github again when working together is like a Super Intelligent Source Code Reviewer & Tracker.
For Eg. 6.57.5 doesn't boot while your previous compiled 6.56.8 boots.
You can use git checkout to revert it back to 6.56.8 to confirm it.
Code:
cd ~/cm11/bootable/recovery
git log [COLOR="Red"]<- Press [B]Enter[/B] to scroll & [B]Ctrl[/B] + [B]z[/B] to break[/COLOR]
git checkout [COLOR="blue"]86a7b310c2eadabbcbcd99243fc66bb197132446[/COLOR]
Screenshot
OR
Code:
git checkout [COLOR="blue"]86a7b31[/COLOR]
Screenshot
You can always review Phil3759 latest commits here . . .
To check your PhilZ Touch currently at which commits
Code:
cd ~/cm11/bootable/recovery
git log -1
When it boots then git checkout the next newer commits, this way you'll be able to pinpoint which commits is the culprit.
If still it doesn't boot then there is definitely something wrong with your setup . . . :laugh:
Make clean
For building PhilZ Touch you don't really have to make clean before each new build. I've notice many DEV uses various make clean commands as listed below . . .
Code:
cd ~/cm11
make clean
make clobber
make dataclean
make installclean
make -j4 clean dataclean installclean
make clean = Wipe everything inside ~/cm11/out & it will take you another 30 to 45 min to recompile if you didn't use ccache ! Just manually delete the device folder at $OUT will do.
Eg. ~/cm11/out/target/product/S939 <- just manually delete S939 folder will do
This will speed up the whole build process on the next build & typically, it will only take 2 minutes to rebuild . . . :laugh: i've wrote a script that automatically & continuously for building PhilZ Touch for MTK arm11, cortex-a9 & cortex-a7, all boots, all without make clean only remove the device folder at $OUT . . .
With ccache typically it will take 5 to 10 min after each make clean
Compiled recovery.img
If your SoC is not Qualcomm then most probably the compiled recovery.img will not boot b'cos it is not pack to your device format.
Eg. MTK & Sony Xperia L
So you'll need to find out how to repack it back to your device format then only it will boot ! Unless a DEV has already develop the format, refer to here for Eg . . .
Many doesn't know that ramdisk-recovery.img is actually the ramdisk repacked gzip file. Use below command to extract it.
Code:
cd ~/cm11
source build/envsetup.sh
lunch cm_[COLOR="Red"]S939[/COLOR]-eng <- Change accordingly to your [COLOR="red"]device_name[/COLOR]
cd $OUT
mkdir ramdisk
cd ramdisk
gzip -dc ../ramdisk-recovery.img | cpio -i
Or you can also make all the necessary editing to $OUT/recovery/root then repack it to gzip
Typical command
Code:
cd $OUT/recovery/root
find . | cpio -o -H newc | gzip > ../../newramdisk.cpio.gz
i don't own all android devices on the market so i donno what are the commands or procedures that will work for your device, you will have to find that out yourself. Typical repacking command
Code:
cd $OUT
mkbootimg --kernel kernel --ramdisk newramdisk.cpio.gz -o new_recovery.img
Again, google is your best friend . . .
Error reporting
Before reporting an error always look for solutions at Q&A here as most of them has already been answered. As mentioned, google is your best friend so go & hunt for it.
When you bump into an obstacle, typically you would wanna solve it ASAP. Try taking a break then come back a few days later & Voila, the answer will be right in front of you ! Trust me, provided you did google it . . .
Compilation error
If you have compilations error then refer to the compile.log & look for clues.
Code:
make -j8 recoveryimage 2>&1 | tee ~/Documents/[COLOR="Blue"]compile.log[/COLOR]
Typically, it will be a few line above ERROR1. Sometime you may need to scroll up a bit more & sometimes the build error doesn't hint anything at all !
For example below, i have remove bison
Code:
prebuilts/misc/linux-x86/bison/[COLOR="blue"]bison[/COLOR] -d -o /home/yuweng/cm11/out/target/product/MediaTek/obj/STATIC_LIBRARIES/libedify_intermediates/parser.cpp bootable/recovery/edify/parser.y
target thumb C: libminzip <= bootable/recovery/minzip/SysUtil.c
prebuilts/misc/linux-x86/bison/[COLOR="Blue"]bison[/COLOR]: external/bison/data/m4sugar/m4sugar.m4: cannot open: No such file or directory
build/core/binary.mk:375: recipe for target '/home/yuweng/cm11/out/target/product/MediaTek/obj/STATIC_LIBRARIES/libedify_intermediates/parser.cpp' failed
make: *** [/home/yuweng/cm11/out/target/product/MediaTek/obj/STATIC_LIBRARIES/libedify_intermediates/parser.cpp] [COLOR="Red"]Error 1[/COLOR]
make: *** Waiting for unfinished jobs....
Part-Source as of Aug 2014, builds working PhilZ Touch & if later it doesn't then always refer to here as Phil3759 might add new feature that requires additional projects.
Always refer to compile.log & build ERROR1 should give some hints, again, if it doesn't then google is your best friend . . . :laugh:
Error log
If compiled PhilZ Touch boots with a blank screen & adb is working then you can still get a log out of it.
Code:
adb shell pull /tmp/recovery.log
You can also try below command to capture screenshot while at PhilZ Touch
Code:
adb shell /sbin/fb2png
adb pull /data/local/fbdump.png
If compiled PhilZ Touch boots with GUI then you can generate error reporting. Advanced Functions -> Report Error.
adb commands
Sometimes you need kill adb first then only it will connect. Try below commands
Code:
adb kill-server
adb start-server
adb devices
adb reboot
adb reboot recovery
What to do when reporting error
A single line reply Unfortunately it doesn't work won't help.
Always provide as much info as possible, attach your BoardConfig.mk, recovery.fstab or any mkvendor.sh files that you have edited, attach compile.log, attach PhilZ Touch generated recovery.log this will help in trouble-shooting, identifying & solving your problems.
Credits
Phil3759 for continuously developing, improving & maintaining PhilZ Touch . . . :good:
Daniel Hillenbrand AKA codeworkx for continuously developing, improving & maintaining BBQLinux . . . :good:
CyanogenMod Team & contributors for continuously developing, improving & maintaining CyanogenMod repo . . . :good:
Samantha for doing a coverage of this thread at the XDA Portal . . . :good:
Last but not least, my Master Shifu Carliv who has taught me how to compile from source & continuously guiding me to the right direction . . . :good:
Give credit where credit is due . . . :good:
Reserved
Case Study
Qualcomm
Qualcomm SoC has the best cm support so typically you can find all infos there.
When you use mkvendor.sh to unpack HTC One M8 all the necessary files are auto-generated correctly.
Below is the BoardConfig.mk auto-generated by mkvendor.sh
Code:
USE_CAMERA_STUB := true
# inherit from the proprietary version
-include vendor/HTC/One/BoardConfigVendor.mk
TARGET_ARCH := arm
TARGET_NO_BOOTLOADER := true
TARGET_BOARD_PLATFORM := unknown
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_CPU_VARIANT := cortex-a7
TARGET_CPU_SMP := true
ARCH_ARM_HAVE_TLS_REGISTER := true
TARGET_BOOTLOADER_BOARD_NAME := One
[COLOR="blue"]BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 ehci-hcd.park=3
BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_PAGESIZE := 2048[/COLOR]
# fix this up by examining /proc/mtd on a running device
BOARD_BOOTIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_USERDATAIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_FLASH_BLOCK_SIZE := 131072
TARGET_PREBUILT_KERNEL := device/HTC/One/kernel
BOARD_HAS_NO_SELECT_BUTTON := true
You'll notice it has the same config as here
mkvendor.sh will also correctly extract the recovery.fstab from M8 recovery.img too
Code:
# Android fstab file.
#<src> <mnt_point> <type> <mnt_flags> <fs_mgr_flags>
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
/dev/block/mmcblk0p42 /boot emmc defaults defaults
/dev/block/mmcblk0p43 /recovery emmc defaults defaults
/dev/block/mmcblk0p45 /system ext4 ro,seclabel,noatime,data=ordered wait
/dev/block/platform/msm_sdcc.1/by-name/userdata /data ext4 rw,seclabel,nosuid,nodev,relatime,discard,noauto_da_alloc,data=ordered wait,check
/dev/block/mmcblk0p46 /cache ext4 rw,seclabel,nosuid,nodev,relatime,data=ordered wait,check
/dev/block/mmcblk0p39 /devlog ext4 rw,seclabel,nosuid,nodev,relatime,errors=continue,data=ordered wait
/dev/block/mmcblk0p27 /fataldevlog ext4 rw,seclabel,nosuid,nodev,relatime,errors=continue,data=ordered wait
/dev/block/platform/msm_sdcc.1/by-name/radio /firmware/radio vfat ro,relatime,uid=1000,gid=1000,fmask=0337,dmask=0227,codepage=cp437,iocharset=iso8859-1,shortname=lower,errors=remount-ro wait
/dev/block/platform/msm_sdcc.1/by-name/adsp /firmware/adsp vfat ro,relatime,uid=1000,gid=1000,fmask=0337,dmask=0227,codepage=cp437,iocharset=iso8859-1,shortname=lower,errors=remount-ro wait
/dev/block/platform/msm_sdcc.1/by-name/wcnss /firmware/wcnss vfat ro,relatime,uid=1000,gid=1000,fmask=0337,dmask=0227,codepage=cp437,iocharset=iso8859-1,shortname=lower,errors=remount-ro wait
/dev/block/mmcblk0p22 /custdata ext4 rw,seclabel,nosuid,nodev,relatime,data=ordered defaults
/devices/msm_sdcc.2/mmc_host auto auto defaults voldmanaged=sdcard1:auto
/devices/platform/xhci-hcd auto auto defaults voldmanaged=usb:auto
So compare between both & make the necessary updates, AFAIK, you don't need to include all the other build flags, those are for building ROMs/ kernels, just update the correct TARGET_CPU_VARIANT & PhilZ Touch build flags will do & if it doesn't boot then you'll have to find that out yourself . . . :laugh:
HTC One M8 recovery.img from here
Broadcom
Recently got a request for building PhilZ Touch for Lava Magnum X604 which uses Broadcom BCM23550 & there isn't much development on this SoC even thought its released on 2012 !
A quick search found Samsung Galaxy Grand Neo uses the same SoC & it doesn't have cm device tree.
AKA GT-I9060 & further search found this & it leads to few more . . . (1) (2) (3)
Above shall give some hint on how to build PhilZ Touch on your BCM23550.
Below are the mkvendor.sh generated files that needs editing.
BoardConfig.mk
Code:
USE_CAMERA_STUB := true
# inherit from the proprietary version
-include vendor/Magnum/X604/BoardConfigVendor.mk
TARGET_ARCH := arm
TARGET_NO_BOOTLOADER := true
TARGET_BOARD_PLATFORM := unknown [COLOR="Red"]<- Optionally, you can rename accordingly to [COLOR="Blue"]default.prop -> ro.board.platform=[B][COLOR="Black"]java[/COLOR][/B][/COLOR][/COLOR]
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_CPU_VARIANT := cortex-a7
TARGET_CPU_SMP := true
ARCH_ARM_HAVE_TLS_REGISTER := true
TARGET_BOOTLOADER_BOARD_NAME := X604
BOARD_KERNEL_CMDLINE :=
BOARD_KERNEL_BASE := 0x10000000
BOARD_KERNEL_PAGESIZE := 2048
# fix this up by examining /proc/mtd on a running device
BOARD_BOOTIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_USERDATAIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_FLASH_BLOCK_SIZE := 131072
TARGET_PREBUILT_KERNEL := device/Magnum/X604/kernel
BOARD_HAS_NO_SELECT_BUTTON := true
[COLOR="Blue"]#Philz Touch build flags for Magnum X604[/COLOR]
TARGET_COMMON_NAME := Magnum X604
[COLOR="red"]#[/COLOR]BOARD_USE_NTFS_3G := false [COLOR="Blue"]<- if it doesn't boot then remove [COLOR="red"]#[/COLOR] remark[/COLOR]
[COLOR="Red"]#[/COLOR]TARGET_RECOVERY_PIXEL_FORMAT := "BGRA_8888" [COLOR="Blue"]<- if distorted graphics then remove [COLOR="red"]#[/COLOR] remark[/COLOR]
TARGET_SCREEN_HEIGHT := 1280
TARGET_SCREEN_WIDTH := 720
TARGET_USE_CUSTOM_LUN_FILE_PATH := "/sys/devices/platform/usb_mass_storage/lun0/file"
BRIGHTNESS_SYS_FILE := "/sys/class/leds/lcd-backlight/brightness"
recovery.fstab
Code:
# Android fstab file.
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
[COLOR="blue"]#Init[/COLOR]
/dev/block/platform/sdhci.1/by-name/boot /boot emmc defaults defaults
/dev/block/platform/sdhci.1/by-name/recovery /recovery emmc defaults defaults
/dev/block/platform/sdhci.1/by-name/system /system ext4 ro wait
/dev/block/platform/sdhci.1/by-name/cache /cache ext4 noatime,nosuid,nodev,nomblk_io_submit,errors=panic wait
/dev/block/platform/sdhci.1/by-name/userdata /data ext4 rw,nosuid,nodev,noatime,errors=panic,user_xattr,barrier=1,data=ordered,noauto_da_alloc wait,encryptable=footer
/dev/block/zram0 none swap defaults zramsize=201326592
[COLOR="Blue"]#voldmanaged[/COLOR]
/devices/platform/sdhci.1/mmc_host/mmc0 auto vfat defaults noemulatedsd,nonremovable,voldmanaged=sdcard0:auto
/devices/platform/sdhci.0/mmc_host/mmc2 auto vfat defaults voldmanaged=sdcard1:auto
/devices/platform/3f120000.usb-otg/usb1 auto vfat defaults voldmanaged=usbdisk0:auto
device_X604.mk
Code:
$(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk)
# The gps config appropriate for this device
[COLOR="Red"]#[/COLOR]$(call inherit-product, device/common/gps/gps_us_supl.mk)
$(call inherit-product-if-exists, vendor/Magnum/X604/X604-vendor.mk)
DEVICE_PACKAGE_OVERLAYS += device/Magnum/X604/overlay
LOCAL_PATH := device/Magnum/X604
ifeq ($(TARGET_PREBUILT_KERNEL),)
LOCAL_KERNEL := $(LOCAL_PATH)/kernel
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif
PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel
$(call inherit-product, build/target/product/full.mk)
PRODUCT_BUILD_PROP_OVERRIDES += BUILD_UTC_DATE=0
PRODUCT_NAME := full_X604
PRODUCT_DEVICE := X604
[COLOR="Blue"]#PhilZ Touch[/COLOR]
PRODUCT_COPY_FILES +=
$(LOCAL_PATH)/recovery.fstab:recovery/root/[COLOR="blue"]fstab.java[/COLOR]
Follow necessary steps at post #1 & #2 & you shall be able to build PhilZ Touch . . . :fingers-crossed:
Intel x86
To build PhilZ Touch for Atom using this Part-Source will require one additional project.
Code:
grep -v linux-x86/x86/i686-linux-android-4.7 ~/Documents/x>~/Documents/x.tmp;mv ~/Documents/x.tmp ~/Documents/x
Add the above to Line 82 of the Part-Source script. Below are the changes to BoardConfig.mk for building on x86 target
Code:
TARGET_ARCH := [COLOR="blue"]x86[/COLOR]
TARGET_NO_BOOTLOADER := true
TARGET_BOARD_PLATFORM := unknown [COLOR="Red"]<- Optionally, you can rename accordingly to [COLOR="Blue"]default.prop -> ro.board.platform[/COLOR][/COLOR]
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_ARCH_VARIANT := [COLOR="blue"]x86-atom[/COLOR]
TARGET_CPU_VARIANT := [COLOR="blue"]x86[/COLOR]
TARGET_CPU_SMP := true
ARCH_ARM_HAVE_TLS_REGISTER := true
Source 1 <- For ref, you don't need to do all that on BBQLinux . . .
Source 2
First !!!!
Everytime afraid to see your detailed , and good to follow tutorials......
will start now to show my way for lg msm8226 device
THX MY FRIEND
***************************************************************************************************************************************
Here is my way to compile Philz Touch for LG L90 (w7) (D405EU) using yuwengs Cm-11 parted_source.
This Method should be similar for other LG Devices, like: "G2" + "G2 Mini" and other.... NOT TESTED !!!
let"s go:
To the point: "Syncing Part-source" you can follow the instructions of yuwengs tutorial from this thread.
additionally for our Lg Device we need mkbootimg from THIS link. developed by xiaolu ( thx for this)....
in our case we unpack the downloaded zip to Home so we have a new folder now. Named " mkbootimg_tools-master "
Copy stock boot.img or recovery.img from your device to your Home folder.
Open Terminal, and type :
Code:
cd ~/cm11
build/tools/device/mkvendor.sh lge w7 ~/boot.img
[COLOR="Blue"]or[/COLOR]
build/tools/device/mkvendor.sh lge w7 ~/recovery.img
[COLOR="Blue"]then[/COLOR]
cd ~/mkbootimg_tools-master
chmod 777 mkboot
./mkboot ~/boot.img stockboot[/QUOTE]
in your [B]mkbootimg_tools-master[/B] folder is a new folder named [B]stockboot[/B], copy the file [B]dt.img[/B] from there to:
~/cm11/device/lge/w7
[B]Open & edit the files as listed below
Put all PhilZ Touch build flags at the bottom of the BoardConfig.mk under a heading of #PhilZ Touch build flags for easy reference[/B]
~/cm11/device/lge/w7/[COLOR="Blue"]BoardConfig.mk[/COLOR]
[code]USE_CAMERA_STUB := true
# inherit from the proprietary version
-include vendor/lge/w7/BoardConfigVendor.mk
TARGET_GLOBAL_CFLAGS += -mfpu=neon -mfloat-abi=softfp
TARGET_GLOBAL_CPPFLAGS += -mfpu=neon -mfloat-abi=softfp
TARGET_ARCH := arm
TARGET_NO_BOOTLOADER := true
TARGET_BOARD_PLATFORM := unknown <- Non_Critical
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_CPU_VARIANT := krait [COLOR="Red"]<- Critical, either cortex-a5, cortex-a7, cortex-a8, cortex-a9, cortex-a15, krait, scorpion or generic[/COLOR]
ARCH_ARM_HAVE_TLS_REGISTER := true
TARGET_BOOTLOADER_BOARD_NAME := w7
# Kernel Prebuilt
TARGET_PREBUILT_KERNEL := device/lge/w7/kernel
BOARD_MKBOOTIMG_ARGS := --dt device/lge/w7/dt.img [COLOR="Red"]<- VERY IMPORTANT !!! otherwise recovery won"t boot[/COLOR]
BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 user_debug=31 msm_rtb.filter=0x37 androidboot.hardware=w7
BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_PAGESIZE := 2048
# fix this up by examining /proc/mtd on a running device
BOARD_BOOTIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 0x105c0000 [COLOR="Red"]<- Change this accordingly to your recovery size so that build will error when its oversize[/COLOR]
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_USERDATAIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_FLASH_BLOCK_SIZE := 131072
BOARD_HAS_NO_SELECT_BUTTON := true
#Recovery
BRIGHTNESS_SYS_FILE := "/sys/class/leds/lcd-backlight/brightness"
TARGET_USE_CUSTOM_LUN_FILE_PATH := "/sys/devices/virtual/android_usb/android0/f_mass_storage/lun%d/file"
TARGET_NO_BOOTLOADER := true
TARGET_RECOVERY_FSTAB := device/lge/w7/rootdir/fstab.w7
RECOVERY_FSTAB_VERSION := 2
TARGET_RECOVERY_PIXEL_FORMAT := "RGBX_8888"
BOARD_USE_CUSTOM_RECOVERY_FONT := \"roboto_10x18.h\"
HAVE_SELINUX := true
BOARD_HAS_NO_MISC_PARTITION := true
TARGET_RECOVERY_QCOM_RTC_FIX := true
TARGET_USERIMAGES_USE_F2FS := true
TARGET_SCREEN_HEIGHT := 960
TARGET_SCREEN_WIDTH := 540
TARGET_COMMON_NAME := LG L90
~/cm11/device/lge/w7/cm.mk
Code:
## Specify phone tech before including full_phone
$(call inherit-product, vendor/cm/config/gsm.mk)
# Release name
PRODUCT_RELEASE_NAME := w7
# Inherit some common CM stuff.
[COLOR="Red"]#[/COLOR]$(call inherit-product, vendor/cm/config/common_full_phone.mk) [COLOR="Red"]<- Disable it[/COLOR]
# Inherit device configuration
$(call inherit-product, device/lge/w7/device_w7.mk)
## Device identifier. This must come after all inclusions
PRODUCT_DEVICE := w7
PRODUCT_NAME := cm_w7
PRODUCT_BRAND := lge
PRODUCT_MODEL := w7
PRODUCT_MANUFACTURER := lge
~/cm11/device/lge/w7/recovery.fstab
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/devices/msm_sdcc.2/mmc_host auto vfat defaults voldmanaged=sdcard1:auto,noemulatedsd
/dev/block/platform/msm_sdcc.1/by-name/system /system ext4 ro,barrier=1 wait,check
/dev/block/platform/msm_sdcc.1/by-name/userdata /data ext4 noatime,nosuid,nodev,barrier=1,noauto_da_alloc,discard,data=ordered,errors=continue wait,check,encryptable=/dev/block/platform/msm_sdcc.1/by-name/encrypt
/dev/block/platform/msm_sdcc.1/by-name/cache /cache ext4 noatime,nosuid,nodev,barrier=1,data=ordered wait,check
/dev/block/platform/msm_sdcc.1/by-name/boot /boot emmc defaults defaults
/dev/block/platform/msm_sdcc.1/by-name/recovery /recovery emmc defaults defaults
/dev/block/platform/msm_sdcc.1/by-name/misc /misc emmc defaults defaults
~/cm11/device/lge/w7/device_w7.mk
Code:
$(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk)
# The gps config appropriate for this device
[COLOR="Red"]#[/COLOR]$(call inherit-product, device/common/gps/gps_us_supl.mk) [COLOR="Red"]<- Disable it[/COLOR]
$(call inherit-product-if-exists, vendor/lge/w7/w7-vendor.mk)
DEVICE_PACKAGE_OVERLAYS += device/lge/w7/overlay
LOCAL_PATH := device/lge/w7
ifeq ($(TARGET_PREBUILT_KERNEL),)
LOCAL_KERNEL := $(LOCAL_PATH)/kernel
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif
PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel
$(call inherit-product, build/target/product/full.mk)
PRODUCT_BUILD_PROP_OVERRIDES += BUILD_UTC_DATE=0
PRODUCT_NAME := full_w7
PRODUCT_DEVICE := w7
#PhilZ Touch
PRODUCT_COPY_FILES +=
$(LOCAL_PATH)/recovery.fstab:recovery/root/fstab.w7 [COLOR="Red"]<- adb shell getprop ro.hardware to identify it.[/COLOR]
LG L90 Device Specific. (maybe other LG Devices to):
Our L90 have no Hardware Key Combo to boot direct into recovery, we only could get into the LG internal " Factory data reset " menue with the Volume - & Power Key Combo
if we both ask confirm with yes, Recovery will boot and do automatic a factory reset and reboot. If we Softbricked now by an accident, we get into a "Loop". because theres no working system that can be factory reseted
and we have to manual reflash the device.
For this reason we change = ~/cm11/bootable/recovery/recovery.c
Code:
1176 case 's': send_intent = optarg; break;
1177 case 'u': update_package = optarg; break;
1178 case 'w': wipe_data = wipe_cache = 0; break; [COLOR="Red"]<- Change 1 to 0[/COLOR]
1179 case 'm': wipe_media = 1; break;
1180 case 'c': wipe_cache = 1; break;
now recovery boots up " Normal " when we choose Factory Reset by LG Hardware Combo
Note: its Highly Recommend to activate fastboot mode on LG L90 so you could reach your device in every case....
THX Phil3759 for the Help here...
FROM NOW WE FOLLOW AGAIN YUWENGS TUTORIAL FROM POINT: Start Building it !
THX yuweng
Hi there
Good Initiative
just some thoughts:
When Building, it should be (build command):
Code:
make recoveryimage
Why?
Adding an number of jobs, can cause some issues, depending on the host build system.
Also, it will hide possible source errors, giving only an few or none errors --> output
Of course yours is right also, but it wont work, for everyone.
Regards
I still use Bruno Martin's MTK Tools to unpack/repack after the compilation. :good:
I only take the ramdisk-recovery.cpio from the OUT_DIR folder, extract it, edit/change/remove some files, repack with stock/custom kernel to achieve smallest recovery.img size.
Configuration for ZTE N986 with single partition (/data/media)
BoardConfig.mk
Code:
USE_CAMERA_STUB := true
# inherit from the proprietary version
-include vendor/ZTE/N986/BoardConfigVendor.mk
TARGET_ARCH := arm
TARGET_NO_BOOTLOADER := true
TARGET_BOARD_PLATFORM := unknown
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_CPU_VARIANT := cortex-a7
TARGET_CPU_SMP := true
ARCH_ARM_HAVE_TLS_REGISTER := true
TARGET_BOOTLOADER_BOARD_NAME := N986
BOARD_KERNEL_CMDLINE := 8F02V1.0.5B01
BOARD_KERNEL_BASE := 0x10000000
BOARD_KERNEL_PAGESIZE := 2048
# fix this up by examining /proc/mtd on a running device
BOARD_BOOTIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_USERDATAIMAGE_PARTITION_SIZE := 0x105c0000
BOARD_FLASH_BLOCK_SIZE := 131072
TARGET_PREBUILT_KERNEL := device/ZTE/N986/kernel
BOARD_HAS_NO_SELECT_BUTTON := true
#Philz Touch build flags for MTK
TARGET_USE_CUSTOM_LUN_FILE_PATH := "/sys/devices/platform/mt_usb/gadget/lun%d/file"
TARGET_COMMON_NAME := N986
BOARD_USE_MTK_LAYOUT := true
BOARD_MTK_BOOT_LABEL := "/bootimg"
BOARD_USE_NTFS_3G := false
TARGET_SCREEN_HEIGHT := 1280
TARGET_SCREEN_WIDTH := 720
BRIGHTNESS_SYS_FILE := "/sys/class/leds/lcd-backlight/brightness"
recovery.fstab
Code:
# mount point fstype device [device2]
/dev/bootimg /bootimg emmc defaults defaults
/dev/recovery /recovery emmc defaults defaults
/dev/uboot /uboot emmc defaults defaults
/[email protected] /system ext4 ro,noatime wait
/[email protected] /cache ext4 noatime,nosuid,nodev,noauto_da_alloc wait
/[email protected] /data ext4 noatime,nosuid,nodev,noauto_da_alloc wait,encryptable=footer
/dev/block/mmcblk1p1 /sdcard vfat defaults defaults
UPDATE:
I'm still confused with the correlation between recovery.fstab, fstab.<device_id>, init and vold managed mount point. I only found the differences between recovery.fstab v1 and v2 in this post. Could you describe it a little bit?
I'm testing this fstab with kitkat kernel and it's working fine.
recovery.fstab
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
/dev/bootimg /bootimg emmc defaults defaults
/dev/recovery /recovery emmc defaults defaults
/dev/uboot /uboot emmc defaults defaults
/[email protected] /system ext4 ro,noatime wait
/[email protected] /cache ext4 noatime,nosuid,nodev,noauto_da_alloc wait
/[email protected] /data ext4 noatime,nosuid,nodev,noauto_da_alloc wait,encryptable=footer
/[email protected] /emmc vfat defaults defaults
/dev/block/mmcblk1p1 /sdcard vfat defaults defaults
# VOLD mount points (Ref taken from Lenovo S939 KitKat 4.4.2)
# vold managed volumes for generic MTK
#/devices/platform/mtk-sd.0/mmc_host auto vfat defaults voldmanaged=sdcard0:[email protected],noemulatedsd
#/devices/platform/mtk-sd.1/mmc_host auto vfat defaults voldmanaged=sdcard1:auto
fstab.goldfish
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
/dev/block/mtdblock0 /system ext4 ro,barrier=1 wait
/dev/block/mtdblock1 /data ext4 noatime,nosuid,nodev,barrier=1,nomblk_io_submit wait,check
/dev/block/mtdblock2 /cache ext4 noatime,nosuid,nodev,nomblk_io_submit,errors=panic wait,check
#/devices/platform/mtk-sd.0/mmc_host auto vfat defaults voldmanaged=sdcard0:[email protected],noemulatedsd
#/devices/platform/mtk-sd.1/mmc_host auto vfat defaults voldmanaged=sdcard1:auto
Thats how all android devices started off when they have the non-standard boot.img or recovery.img, Thanks to bgcngm AKA Bruno Martins he has open up a whole new world for MTK devices when he make his unpack/ repack script public to the world . . . :good:
As i've mentioned here, we would be using stock ROM until today but its sad to see many so called ROM Porter/ ROM Cooker never even mentioned his name when they published their work, they all have forgotten that all of this would not be possible without BM's script . . .
Back to business . . .
You can also try this or this your good friend awaaas told me bigbiff has help him with that, and this all is using BM's script to automate the whole build process . . . :good:
Alternate commands for your technique
Code:
cd ~/cm11
source build/envsetup.sh
lunch cm_N986-eng
cd $OUT
copy repack-MT65xx.pl to $OUT
Do all your necessary editing to $OUT/recovery/root
perl repack-MT65xx.pl -recovery kernel recovery/root new-recovery.img
@agismaniax : Reply to your question above. . .
You should have refer to here thats where it all started for MTK, take a look at Added on Apr 23, 2014 . . .
fstab.goldfish & ueventd.goldfish.rc is auto-generated by build & its not used for MTK, you can either leave it or just delete it . . .
INIT mount points are direct device block while voldmanaged is using vold which uses virtual nodes to mount both sdcard. -> Source
i don't own a /data/media MTK so i cannot/ donno how to solve the mount USB storage, i did a search previously on this problem & a quick search found this . . .
Why fstab.${ro.hardware} As explained at OP, adb shell getprop ro.hardware then copy your recovery.fstab to root & rename it to fstab.mt6589 & mount USB storage should work for most MTK but not /data/media . . . Why, no one found out or share the working mount points for /data/media on MTK for PhilZ Touch . . . Fyi, shooxy did try but fail . . . :laugh:
For your MT6589 you can use either as below, tested & confirmed working by shooxy . . . :good:
Code:
/devices/platform/mtk-sd.0/mmc_host/mmc0 auto auto defaults voldmanaged=sdcard0:[COLOR="blue"][SIZE="4"]6[/SIZE][/COLOR] [COLOR="Red"]<- your internal sdcard fat partition no.[/COLOR]
/devices/platform/mtk-sd.1/mmc_host/mmc1 auto auto defaults voldmanaged=sdcard1:auto
OR
Code:
/devices/platform/mtk-msdc.0/mmc_host/mmc0 auto auto defaults voldmanaged=sdcard0:[COLOR="Blue"][SIZE="4"]6[/SIZE][/COLOR] [COLOR="Red"]<- your internal sdcard fat partition no.[/COLOR]
/devices/platform/mtk-msdc.1/mmc_host/mmc1 auto auto defaults voldmanaged=sdcard1:auto
As said, for /data/media device i donno, you'll have to find that out yourself . . .
Try & see if it mounts both sdcard . . . :fingers-crossed:
Code:
/devices/platform/mtk-msdc.0/mmc_host/mmc0 auto auto defaults voldmanaged=sdcard0:[COLOR="Blue"][email protected][/COLOR]
/devices/platform/mtk-msdc.1/mmc_host/mmc1 auto auto defaults voldmanaged=sdcard1:auto
Code:
/devices/platform/mt_usb/usb1 auto auto defaults voldmanaged=usb:auto
/devices/platform/mtk-msdc.1/mmc_host/mmc1 auto auto defaults voldmanaged=sdcard1:auto
Use below command, try the path with usb in it, refer to here for some clues . . .
Code:
adb shell su -c ls -R > usb.txt
hello, @yuweng great thread, fantastic tut but... i unfortunately get an error while compiling & it stops. i've done every single step twice, checked and rechecked but can't find a solution. what am i doing worng ?!?! any help please. thanks in advance.
arm-linux-androideabi-gcc: error: ": No such file or directory
build/core/binary.mk:512: recipe for target '/home/eric/cm11/out/target/product/v3/obj/RECOVERY_EXECUTABLES/minivold_intermediates/vold.o' failed
make: *** [/home/eric/cm11/out/target/product/v3/obj/RECOVERY_EXECUTABLES/minivold_intermediates/vold.o] Error 1
CiR3 said:
hello, @yuweng great thread, fantastic tut but... i unfortunately get an error while compiling & it stops. i've done every single step twice, checked and rechecked but can't find a solution. what am i doing worng ?!?! any help please. thanks in advance.
arm-linux-androideabi-gcc: error: ": No such file or directory
build/core/binary.mk:512: recipe for target '/home/eric/cm11/out/target/product/v3/obj/RECOVERY_EXECUTABLES/minivold_intermediates/vold.o' failed
make: *** [/home/eric/cm11/out/target/product/v3/obj/RECOVERY_EXECUTABLES/minivold_intermediates/vold.o] Error 1
Click to expand...
Click to collapse
Check the toolchain PATH.
Regards
CiR3 said:
arm-linux-androideabi-gcc: error: ": No such file or directory
Click to expand...
Click to collapse
if you're using bbqlinux-2014.08.20-x86_64 on Virtualbox then i hope . . .
you did make a backup of your bbqlinux.vdi
All this while, i was using an old bbqlinux(May 1st version) when i wrote & tested the Part-Source script then started this thread & i got exactly the same error as you when i upgrade to use 08.20 version . . .
Tried deleting everything inside ~/cm11 folder except .repo folder, doesn't work, delete whole ~/cm11 & use the backed up .repo from secondary HDD, doesn't work, tried the old script that use 52 projects, again doesn't work, same arm-linux-androideabi-gcc: error no matter what i did . . .
Then i thought to myself, crap, i'm sharing a broken solution then thanks to shooxy he tested the Part-Source & confirmed it works on his setup so that indirectly indicates its my setup problem . . .
Never did found out the cause & here is what i did, replace with the untouched new 08.20 bbqlinux.vdi that i backed up earlier, use ~/cm11/.repo that i've backed up earlier then use PhilZ script to sync again to extract the files, build it & it builds without this error . . . :laugh:
Hi @yuweng. I did a clean and full install on a separate disk as my system is quite slow. But i cannot update the system. I get an error and the Installation gets aborted. And then the error while compiling. I will try with virtual box and report back asap. Thanks anyway for your help. Cheers.
yuweng said:
if you're using bbqlinux-2014.08.20-x86_64 on Virtualbox then i hope . . .
you did make a backup of your bbqlinux.vdi
All this while, i was using an old bbqlinux(May 1st version) when i wrote & tested the Part-Source script then started this thread & i got exactly the same error as you when i upgrade to use 08.20 version . . .
Tried deleting everything inside ~/cm11 folder except .repo folder, doesn't work, delete whole ~/cm11 & use the backed up .repo from secondary HDD, doesn't work, tried the old script that use 52 projects, again doesn't work, same arm-linux-androideabi-gcc: error no matter what i did . . .
Then i thought to myself, crap, i'm sharing a broken solution then thanks to shooxy he tested the Part-Source & confirmed it works on his setup so that indirectly indicates its my setup problem . . .
Never did found out the cause & here is what i did, replace with the untouched new 08.20 bbqlinux.vdi that i backed up earlier, use ~/cm11/.repo that i've backed up earlier then use PhilZ script to sync again to extract the files, build it & it builds without this error . . . :laugh:
Click to expand...
Click to collapse
Becouse your messing your build environment PATHS.
And when you update your distro, that can happen, if you don't know what your doing.
E.g. : Why not hardcode the toolchain$ Path?
OR , add it to the {user} ~bashrc ?
Specially on VM environment...
Regards
CiR3 said:
But i cannot update the system. I get an error and the Installation gets aborted. And then the error while compiling.
Click to expand...
Click to collapse
Thats why i don't updates, bad experience with Windows Updates at work but then again this thread is about building PhilZ Touch not setting up BBQLinux . . .
A XDA friend faces the same problem when he updates & got it solved, mentioned something about gcc-multilib i've pm'ed him to reply the solutions here . . . :fingers-crossed:
superdragonpt said:
E.g. : Why not hardcode the toolchain$ Path?
OR , add it to the {user} ~bashrc ?
Click to expand...
Click to collapse
you don't need to do that on BBQLinux, try it yourself then you'll know . . . :good:
Hi @snapdragonpt ,
thanks for your assistance. It is curious that this happens after 25min of compiling. I've switched back to ubuntu but will give bbq another try, maybe this evening. Anyway, thanks a lot.
Regards
No one better can write tutorials as you do The best in sharing your learnings
Thanks for all
superdragonpt said:
Hi there
Good Initiative
just some thoughts:
When Building, it should be (build command):
Code:
make recoveryimage
Why?
Adding an number of jobs, can cause some issues, depending on the host build system.
Also, it will hide possible source errors, giving only an few or none errors --> output
Of course yours is right also, but it wont work, for everyone.
Regards
Click to expand...
Click to collapse
Code:
mka recoveryimage
Works well too if using the CM source as the base. It will set the -j flag for you depending on what resources you have, kinda like brunch does building CM.
First thanks for detailed guide.
I have quest: My 8 files are empty.
Do I need to add these lines files to boardconfig.mk
#PhilZ Touch build flags for MTK
TARGET_COMMON_NAME := Lenovo S939
BOARD_USE_MTK_LAYOUT := true
BOARD_MTK_BOOT_LABEL := "/bootimg"
BOARD_USE_NTFS_3G := false
BRIGHTNESS_SYS_FILE := "/sys/class/leds/lcd-backlight/brightness"
TARGET_USE_CUSTOM_LUN_FILE_PATH := "/sys/devices/virtual/android_usb/android0/f_mass_storage/lun%d/file" <- Credits to RD chrmhoffmann
TARGET_SCREEN_HEIGHT := 1280
TARGET_SCREEN_WIDTH := 720
BOARD_CUSTOM_BOOTIMG_MK := device/Lenovo/S939/boot.mk <- Credits to RD chrmhoffmann. MTK uses custom mkbootimg
Off now I get this error: unpackbootimg not found. Is your android build environment set up and have the host tools been built??
And i thought the guide is easy enough for everyone to follow & you didn't even read the whole post #1 & #2 or you would've known to provide as much info as possible so that it'll be easier to trouble-shoot your problem rather than guessing what you have . . . Fyi, Phil3759 has given up porting PhilZ Touch to new devices b'cos of this . . . :laugh:
Based on your past active forum post, its Sony Xperia M2 then learn more from here . . . :good:
Yes, mkvendor.sh will generate ONLY skeleton files, you need to manually fill-in PhilZ Touch build flags based on your device specification . . .
Code:
[COLOR="Blue"]#PhilZ Touch build flags for Xperia M2[/COLOR]
TARGET_COMMON_NAME := [COLOR="blue"]Xperia M2[/COLOR]
BRIGHTNESS_SYS_FILE := "/sys/class/leds/lcd-backlight/brightness"
TARGET_USE_CUSTOM_LUN_FILE_PATH := "/sys/devices/virtual/android_usb/android0/f_mass_storage/lun%d/file"
TARGET_SCREEN_HEIGHT := [COLOR="blue"]960[/COLOR]
TARGET_SCREEN_WIDTH := [COLOR="blue"]540[/COLOR]
BOARD_CUSTOM_BOOTIMG_MK := device/Xperia/M2/[COLOR="Blue"]custombootimg.mk[/COLOR] <- Refer to [URL="https://github.com/CyanogenMod/android_device_sony_rhine-common/blob/cm-11.0/BoardConfigCommon.mk#L47"]here[/URL] & [URL="https://github.com/CyanogenMod/android_device_sony_huashan/blob/cm-11.0/BoardConfig.mk#L104"]here[/URL]. i donno which one is suitable for your [COLOR="Blue"]M2[/COLOR]
unpackbootimg not found : then you are not using BBQLinux, try make -j4 otatools first . . .
yuweng said:
And i thought the guide is easy enough for everyone to follow & you didn't even read the whole post #1 & #2 or you would've known to provide as much info as possible so that it'll be easier to trouble-shoot your problem rather than guessing what you have . . . Fyi, Phil3759 has given up porting PhilZ Touch to new devices b'cos of this . . . :laugh:
Based on your past active forum post, its Sony Xperia M2 then learn more from here . . . :good:
Yes, mkvendor.sh will generate ONLY skeleton files, you need to manually fill-in PhilZ Touch build flags based on your device specification . . .
Code:
[COLOR="Blue"]#PhilZ Touch build flags for Xperia M2[/COLOR]
TARGET_COMMON_NAME := [COLOR="blue"]Xperia M2[/COLOR]
BRIGHTNESS_SYS_FILE := "/sys/class/leds/lcd-backlight/brightness"
TARGET_USE_CUSTOM_LUN_FILE_PATH := "/sys/devices/virtual/android_usb/android0/f_mass_storage/lun%d/file"
TARGET_SCREEN_HEIGHT := [COLOR="blue"]960[/COLOR]
TARGET_SCREEN_WIDTH := [COLOR="blue"]540[/COLOR]
BOARD_CUSTOM_BOOTIMG_MK := device/Xperia/M2/[COLOR="Blue"]custombootimg.mk[/COLOR] <- Refer to [URL="https://github.com/CyanogenMod/android_device_sony_rhine-common/blob/cm-11.0/BoardConfigCommon.mk#L47"]here[/URL] & [URL="https://github.com/CyanogenMod/android_device_sony_huashan/blob/cm-11.0/BoardConfig.mk#L104"]here[/URL]. i donno which one is suitable for your [COLOR="Blue"]M2[/COLOR]
unpackbootimg not found : then you are not using BBQLinux, try make -j4 otatools first . . .
Click to expand...
Click to collapse
I've read whole post but I'm newbie of building from source sorry for this and also my english not good.
Actually I want to build recovery for Alcatel with custpack partition.
I'm using ubuntu with all necessary tools for building I was earlier synced repo CM11 but repo from you synced for 20sec. I think it's happend because I have required files for building.
After that I decided to remove whole CM11 repo and synced your repo which is 1.9GB I waiting some time for syncing.
And after that I get this error: unpackbootimg not found.
And now this thread in on the xda portal
Regards
OK mates i am building Android 5 from the stock AOSP until VanirAOSP Lollipop finish the download by the wat i got this error during compilation, that you show in the box code.
host SharedLib: libSR_Recognizer_32 (out/host/linux-x86/obj32/lib/libSR_Recognizer.so)
target R.java/Manifest.java: VpnDialogs (out/target/common/obj/APPS/VpnDialogs_intermediates/src/R.stamp)
warning: string 'accept' has no default translation.
target R.java/Manifest.java: WallpaperCropper (out/target/common/obj/APPS/WallpaperCropper_intermediates/src/R.stamp)
target StaticExecutable: add-property-tag (out/target/product/s2vep/obj/EXECUTABLES/add-property-tag_intermediates/LINKED/add-property-tag)
target StaticExecutable: check-lost+found (out/target/product/s2vep/obj/EXECUTABLES/check-lost+found_intermediates/LINKED/check-lost+found)
target Executable: cpustats (out/target/product/s2vep/obj/EXECUTABLES/cpustats_intermediates/LINKED/cpustats)
target Executable: dhdutil (out/target/product/s2vep/obj/EXECUTABLES/dhdutil_intermediates/LINKED/dhdutil)
target Executable: fio (out/target/product/s2vep/obj/EXECUTABLES/fio_intermediates/LINKED/fio)
target Executable: latencytop (out/target/product/s2vep/obj/EXECUTABLES/latencytop_intermediates/LINKED/latencytop)
target StaticExecutable: memtrack (out/target/product/s2vep/obj/EXECUTABLES/memtrack_intermediates/LINKED/memtrack)
target Executable: memtrack_share (out/target/product/s2vep/obj/EXECUTABLES/memtrack_share_intermediates/LINKED/memtrack_share)
target Executable: micro_bench (out/target/product/s2vep/obj/EXECUTABLES/micro_bench_intermediates/LINKED/micro_bench)
target StaticExecutable: micro_bench_static (out/target/product/s2vep/obj/EXECUTABLES/micro_bench_static_intermediates/LINKED/micro_bench_static)
target Executable: sane_schedstat (out/target/product/s2vep/obj/EXECUTABLES/sane_schedstat_intermediates/LINKED/sane_schedstat)
target Executable: showslab (out/target/product/s2vep/obj/EXECUTABLES/showslab_intermediates/LINKED/showslab)
target Executable: strace (out/target/product/s2vep/obj/EXECUTABLES/strace_intermediates/LINKED/strace)
target StaticExecutable: su (out/target/product/s2vep/obj/EXECUTABLES/su_intermediates/LINKED/su)
Target boot image: out/target/product/s2vep/boot.img
error: could not load kernel 'out/target/product/s2vep/kernel'
make: *** [out/target/product/s2vep/boot.img] Error 1
make: *** Waiting for unfinished jobs....
warning: no entries written for dimen/password_keyboard_height (0x010500a2)
warning: no entries written for drawable/ab_solid_shadow_mtrl (0x010800bb)
warning: no entries written for drawable/ab_transparent_mtrl_alpha (0x010800c4)
warning: no entries written for drawable/btn_check_off_mtrl_alpha (0x010800f8)
warning: no entries written for drawable/btn_check_on_mtrl_alpha (0x0108010e)
warning: no entries written for drawable/btn_radio_off_mtrl_alpha (0x010801b0)
warning: no entries written for drawable/btn_radio_off_pressed_mtrl_alpha (0x010801b4)
warning: no entries written for drawable/switch_off_mtrl_alpha (0x010806b1)
warning: no entries written for drawable/switch_on_mtrl_alpha (0x010806b2)
warning: no entries written for drawable/sym_keyboard_delete_holo (0x010806c5)
#### make failed to build some targets (01:16:17 (hh:mm:ss)) ####
to know I got about 6gb of s2vep out folder, so any help for this error???
It cannot find boot.img, obviously.
Is kernel compilled? Or does it use a prebuilt one?
haky 86 said:
OK mates i am building Android 5 from the stock AOSP until VanirAOSP Lollipop finish the download by the wat i got this error during compilation, that you show in the box code.
host SharedLib: libSR_Recognizer_32 (out/host/linux-x86/obj32/lib/libSR_Recognizer.so)
target R.java/Manifest.java: VpnDialogs (out/target/common/obj/APPS/VpnDialogs_intermediates/src/R.stamp)
warning: string 'accept' has no default translation.
target R.java/Manifest.java: WallpaperCropper (out/target/common/obj/APPS/WallpaperCropper_intermediates/src/R.stamp)
target StaticExecutable: add-property-tag (out/target/product/s2vep/obj/EXECUTABLES/add-property-tag_intermediates/LINKED/add-property-tag)
target StaticExecutable: check-lost+found (out/target/product/s2vep/obj/EXECUTABLES/check-lost+found_intermediates/LINKED/check-lost+found)
target Executable: cpustats (out/target/product/s2vep/obj/EXECUTABLES/cpustats_intermediates/LINKED/cpustats)
target Executable: dhdutil (out/target/product/s2vep/obj/EXECUTABLES/dhdutil_intermediates/LINKED/dhdutil)
target Executable: fio (out/target/product/s2vep/obj/EXECUTABLES/fio_intermediates/LINKED/fio)
target Executable: latencytop (out/target/product/s2vep/obj/EXECUTABLES/latencytop_intermediates/LINKED/latencytop)
target StaticExecutable: memtrack (out/target/product/s2vep/obj/EXECUTABLES/memtrack_intermediates/LINKED/memtrack)
target Executable: memtrack_share (out/target/product/s2vep/obj/EXECUTABLES/memtrack_share_intermediates/LINKED/memtrack_share)
target Executable: micro_bench (out/target/product/s2vep/obj/EXECUTABLES/micro_bench_intermediates/LINKED/micro_bench)
target StaticExecutable: micro_bench_static (out/target/product/s2vep/obj/EXECUTABLES/micro_bench_static_intermediates/LINKED/micro_bench_static)
target Executable: sane_schedstat (out/target/product/s2vep/obj/EXECUTABLES/sane_schedstat_intermediates/LINKED/sane_schedstat)
target Executable: showslab (out/target/product/s2vep/obj/EXECUTABLES/showslab_intermediates/LINKED/showslab)
target Executable: strace (out/target/product/s2vep/obj/EXECUTABLES/strace_intermediates/LINKED/strace)
target StaticExecutable: su (out/target/product/s2vep/obj/EXECUTABLES/su_intermediates/LINKED/su)
Target boot image: out/target/product/s2vep/boot.img
error: could not load kernel 'out/target/product/s2vep/kernel'
make: *** [out/target/product/s2vep/boot.img] Error 1
make: *** Waiting for unfinished jobs....
warning: no entries written for dimen/password_keyboard_height (0x010500a2)
warning: no entries written for drawable/ab_solid_shadow_mtrl (0x010800bb)
warning: no entries written for drawable/ab_transparent_mtrl_alpha (0x010800c4)
warning: no entries written for drawable/btn_check_off_mtrl_alpha (0x010800f8)
warning: no entries written for drawable/btn_check_on_mtrl_alpha (0x0108010e)
warning: no entries written for drawable/btn_radio_off_mtrl_alpha (0x010801b0)
warning: no entries written for drawable/btn_radio_off_pressed_mtrl_alpha (0x010801b4)
warning: no entries written for drawable/switch_off_mtrl_alpha (0x010806b1)
warning: no entries written for drawable/switch_on_mtrl_alpha (0x010806b2)
warning: no entries written for drawable/sym_keyboard_delete_holo (0x010806c5)
#### make failed to build some targets (01:16:17 (hh:mm:ss)) ####
to know I got about 6gb of s2vep out folder, so any help for this error???
Click to expand...
Click to collapse
Where is located the kernel source?
LuK1337 said:
Where is located the kernel source?
Click to expand...
Click to collapse
The located kernel is in the following folder kernel/samsung/galaxys2plus-common
and also i build the zImage and use it as prebuilt kernel, but still give me same issue
actually i am using bcm28155_capri_ss_s2vep_rev05_defconfig as defconfig cause the default one is for cyanogen mod...
andrewww57 said:
It cannot find boot.img, obviously.
Is kernel compilled? Or does it use a prebuilt one?
Click to expand...
Click to collapse
I try it by make one, compilation is fine and use it as prebuilt one but that error still appear...
Sent from my GT-I9105P using XDA Free mobile app
You need to declare the prebuilt kernel as your prbuilt kernel in device_s2vep.mk , see other aosp trees as an example.
BTW, aosp does not support inline kernel building unless for some qcom kernels
@CoolDevelopment @andrewww57
Thank you guys, i fix boot.img by building one and insert it in device tree as well and also now i have more than 14gb and is finish to build chromium source so i guess will need another many hours...
See you next update...
haky 86 said:
@CoolDevelopment @andrewww57
Thank you guys, i fix boot.img by building one and insert it in device tree as well and also now i have more than 14gb and is finish to build chromium source so i guess will need another many hours...
See you next update...
Click to expand...
Click to collapse
take your time
Better do something like this:
put your prebuilt kernel into device/s2vep/kernel
add this
Code:
TARGET_PREBUILT_KERNEL := kernel
PRODUCT_COPY_FILES += $(LOCAL_PATH)/$(TARGET_PREBUILT_KERNEL):kernel
to the top of device_s2vep.mk
Android 5 *_*
Sent from my GT-I9105P using XDA Premium 4 mobile app
CoolDevelopment said:
Better do something like this:
put your prebuilt kernel into device/s2vep/kernel
add this
Code:
TARGET_PREBUILT_KERNEL := kernel
PRODUCT_COPY_FILES += $(LOCAL_PATH)/$(TARGET_PREBUILT_KERNEL):kernel
to the top of device_s2vep.mk
Click to expand...
Click to collapse
ok now is this and is generate about 17gb of out!! :/
including ./system/media/camera/tests/Android.mk ...
including ./system/netd/client/Android.mk ...
including ./system/netd/server/Android.mk ...
including ./system/security/keystore-engine/Android.mk ...
including ./system/security/keystore/Android.mk ...
including ./system/security/softkeymaster/Android.mk ...
including ./system/vold/Android.mk ...
including ./tools/external/fat32lib/Android.mk ...
No private recovery resources for TARGET_DEVICE s2vep
Notice file: external/chromium_org/NOTICE -- out/target/product/s2vep/obj/NOTICE_FILES/src//system/lib/android_webview_android_webview_common_gyp.a.txt
Notice file: external/chromium_org/NOTICE -- out/target/product/s2vep/obj/NOTICE_FILES/src//system/lib/libwebviewchromium.so.txt
Notice file: external/chromium_org/NOTICE -- out/target/product/s2vep/obj/NOTICE_FILES/src//system/lib/android_webview_native_webview_native_gyp.a.txt
target Strip: libwebviewchromium (out/target/product/s2vep/obj/lib/libwebviewchromium.so)
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/arm-linux-androideabi-striput/target/product/s2vep/symbols/system/lib/libwebviewchromium.so: File format not recognized
make: *** [out/target/product/s2vep/obj/lib/libwebviewchromium.so] Error 1
make: *** Waiting for unfinished jobs....
libwebviewchromium.so is not a prpritary file right?
CoolDevelopment said:
libwebviewchromium.so is not a prpritary file right?
Click to expand...
Click to collapse
I guess no, doing a google it's dependes from ram quantity coz i have 4gb, now i correct my device_s2vep.mk with your configuration, because boot.img still appear, i guess the compilation is at the end... :/
please try to update make to at least 4.0
CoolDevelopment said:
please try to update make to at least 4.0
Click to expand...
Click to collapse
That should be downloading from here? coz i use 3.82!!
http://ftp.gnu.org/gnu/make/
is stuck after creating userdata.img and have 18.2gb of out, i am going to kill my self!!!
Thank your so very mich for doing all this hard work for our S2+!!
Just a quick noob question:
Is the zip file allready compiled vor does compiling fail?
Thanks in advance
NW2000 said:
Thank your so very mich for doing all this hard work for our S2+!!
Just a quick noob question:
Is the zip file allready compiled vor does compiling fail?
Thanks in advance
Click to expand...
Click to collapse
Nop is still stuck at boot.img, i guess to wait cm12, it's easier to port
haky 86 said:
Nop is still stuck at boot.img, i guess to wait cm12, it's easier to port
Click to expand...
Click to collapse
Compile kernel to get the 'kernel' file and use it as prebuilt in config. It should work.
As @CoolDevelopment said add to device mk file this code
Code:
TARGET_PREBUILT_KERNEL := kernel
PRODUCT_COPY_FILES += $(LOCAL_PATH)/$(TARGET_PREBUILT_KERNEL):kernel
and put 'kernel' into the folder of device source. It should handle this kernel. Also it's better to delete 'TARGET_KERNEL_SOURCE' and 'TARGET_KERNEL_CONFIG' from BoardConfig.mk, I think.
andrewww57 said:
Compile kernel to get the 'kernel' file and use it as prebuilt in config. It should work.
As @CoolDevelopment said add to device mk file this code
Code:
TARGET_PREBUILT_KERNEL := kernel
PRODUCT_COPY_FILES += $(LOCAL_PATH)/$(TARGET_PREBUILT_KERNEL):kernel
and put 'kernel' into the folder of device source. It should handle this kernel. Also it's better to delete 'TARGET_KERNEL_SOURCE' and 'TARGET_KERNEL_CONFIG' from BoardConfig.mk, I think.
Click to expand...
Click to collapse
OK andrew I will follow that steps, by the way i am downloading it again with all prebuilts tools i guess missed some tools that generate boot.img, once got the zImage i need to rename it to kernel.
Something like this?
ifeq ($(TARGET_PREBUILT_KERNEL),)
LOCAL_KERNEL := device/samsung/s2vep/kernel
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif
PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel
So that's mean the # Kernel lines in boardconfig.mk should be removed in this case?
thanx again
haky 86 said:
OK andrew I will follow that steps, by the way i am downloading it again with all prebuilts tools i guess missed some tools that generate boot.img, once got the zImage i need to rename it to kernel.
Something like this?
ifeq ($(TARGET_PREBUILT_KERNEL),)
LOCAL_KERNEL := device/samsung/s2vep/kernel
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif
PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel
So that's mean the # Kernel lines in boardconfig.mk should be removed in this case?
thanx again
Click to expand...
Click to collapse
Try to add this to BoardConfig:
Code:
TARGET_PREBUILT_KERNEL := device/samsung/s2vep/kernel
and delete 'TARGET_KERNEL_SOURCE' and 'TARGET_KERNEL_CONFIG'
And add yours to device mk:
Code:
ifeq ($(TARGET_PREBUILT_KERNEL),)
LOCAL_KERNEL := device/samsung/s2vep/kernel
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif
PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel
Hello,
Today i tried to "do" a CM12 based ROM but i have a problem during the build.
i tried a hundred times but everytime, it fails...
Code:
/home/maxime/test/prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.11-4.6/bin/../lib/gcc/x86_64-linux/4.6/../../../../x86_64-linux/bin/ld: error: /home/maxime/test/out/host/linux-x86/obj32/EXECUTABLES/rsg-generator_support_intermediates/rsg_generator.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.11-4.6/bin/../lib/gcc/x86_64-linux/4.6/../../../../x86_64-linux/bin/ld: error: /home/maxime/test/out/host/linux-x86/obj32/EXECUTABLES/rsg-generator_support_intermediates/spec.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.11-4.6/bin/../sysroot/usr/lib/../lib32/Scrt1.o(.text+0x28): error: undefined reference to 'main'
target thumb C++: libjni_pacprocessor <= frameworks/base/packages/services/PacProcessor/jni/com_android_pacprocessor_PacNative.cpp
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/././../home../maxime/test/..prebuilts/gcc//linux-armx86/arm-linux/arm--linux-androideabiandroideabi-4.8//bin/.bin/./libld/gcc/:arm- errorlinux-: /androideabi/home/4.8/maxime/..test/out/./target.//product../tf700t/./obj./arm/SHARED_LIBRARIES-linux/libjni_eglfence_intermediates-androideabi/jni_egl_fence.o/bin: /ld:file is error empty:
/home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_tinyplanet_intermediates/tinyplanet.o: file is empty
collect2: ld returned 1 exit status
target SharedLib: libjni_filtershow_filters (/home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/LINKED/libjni_filtershow_filters.so)
make: *** [/home/maxime/test/out/host/linux-x86/obj32/EXECUTABLES/rsg-generator_support_intermediates/rsg-generator_support] Erreur 1
make: *** Attente des tâches non terminées....
target thumb C++: libpac <= external/chromium-libpac/src/proxy_resolver_v8.cc
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/tinyplanet.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/kmeans.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/gradient.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/saturated.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/exposure.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/edge.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/contrast.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/hue.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/shadows.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/highlight.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/hsv.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/vibrance.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/geometry.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/negative.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/redEyeMath.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/fx.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/wbalance.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/redeye.o: file is empty
/home/maxime/test/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: /home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/filters/bwfilter.o: file is empty
collect2: error: ld returned 1 exit status
collect2: error: ld returned 1 exit status
make: *** [/home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_eglfence_intermediates/LINKED/libjni_eglfence.so] Erreur 1
make: *** [/home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_filtershow_filters_intermediates/LINKED/libjni_filtershow_filters.so] Erreur 1
collect2: error: ld returned 1 exit status
make: *** [/home/maxime/test/out/target/product/tf700t/obj/SHARED_LIBRARIES/libjni_tinyplanet_intermediates/LINKED/libjni_tinyplanet.so] Erreur 1
frameworks/base/packages/services/PacProcessor/jni/jni_init.cpp:28:17: warning: unused parameter 'reserved' [-Wunused-parameter]
extern "C" jint JNI_OnLoad(JavaVM* vm, void* reserved) {
^
frameworks/base/packages/services/PacProcessor/jni/com_android_pacprocessor_PacNative.cpp:63:17: warning: unused parameter 'env' [-Wunused-parameter]
static jboolean com_android_pacprocessor_PacNative_createV8ParserNativeLocked(JNIEnv* env,
^
frameworks/base/packages/services/PacProcessor/jni/com_android_pacprocessor_PacNative.cpp:75:17: warning: unused parameter 'env' [-Wunused-parameter]
static jboolean com_android_pacprocessor_PacNative_destroyV8ParserNativeLocked(JNIEnv* env,
^
make: *** wait: Aucun processus enfant. Arrêt.
#### make failed to build some targets (02:05 (mm:ss)) ####
Thank you
maxou2600 said:
Code:
/home/maxime/test/prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.11-4.6/bin/../lib/gcc/x86_64-linux/4.6/../../../../x86_64-linux/bin/ld: error: /home/maxime/test/out/host/linux-x86/obj32/EXECUTABLES/rsg-generator_support_intermediates/rsg_generator.o: file is empty
...[/QUOTE]
Weird error. Have you tried "make clean" and rebuilding?
Click to expand...
Click to collapse
Thank you
Yep' i tried it unsuccessfully...
i Think that a lot of files were corrupted (Bad ADSL connection, with lot of FEC, HEC and CRC...)
I removed the "test" folder and resync all the files during the night (about 15-20GB)
Now after half an hour i have that error
Code:
/usr/bin/lzma : /home/maxime/test/out/target/product/tf700t/ramdisk-recovery.cpio: Aucun fichier ou dossier de ce type
make: *** [/home/maxime/test/out/target/product/tf700t/recovery.img] Erreur 1
make: *** Attente des tâches non terminées....
####make failed to build some targets (30:27 (mm:ss)) ####
in folder ~/test/out/target/product/tf700t i found a file called "ramdisk-recovery.img", i renamed it to "ramdisk-recovery.cpio" but i think it was not the same file because now i have this error.
Code:
mkdir -p /home/maxime/test/out/target/product/tf700t/obj/PACKAGING/recovery_patch_intermediates/
PATH=/home/maxime/test/out/host/linux-x86/bin:$PATH /home/maxime/test/out/host/linux-x86/bin/imgdiff /home/maxime/test/out/target/product/tf700t/boot.img /home/maxime/test/out/target/product/tf700t/recovery.img /home/maxime/test/out/target/product/tf700t/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p
source and target don't have same number of chunks!
source chunks:
chunk 0: type 0 start 0 len 4253810
chunk 1: type 2 start 4253810 len 1161984
chunk 2: type 0 start 4927508 len 84
target chunks:
chunk 0: type 0 start 0 len 7227496
make: *** [/home/maxime/test/out/target/product/tf700t/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p] Erreur 1
make: *** Attente des tâches non terminées....
So, i "make clean" and "brunch" again. I tell you if the first error (No such File or directory) re-comes (no-reason )
yep' same as this morning :
Code:
/usr/bin/lzma : /home/maxime/test/out/target/product/tf700t/ramdisk-recovery.cpio: Aucun fichier ou dossier de ce type
make: *** [/home/maxime/test/out/target/product/tf700t/recovery.img] Erreur 1
make: *** Attente des tâches non terminées....
####make failed to build some targets (30:30 (mm:ss)) ####
EDIT : At the begin of the build i got some errors (I Don't know if it's a problem, i think it's not otherwise build stop like (Ramdisk-recovery.cpio error...) :
Code:
No private recovery resources for TARGET_DEVICE tf700t
"ebtables is disabled on this build"
After some research i think that the "ramdisk_recovery" isn't "created" during the build.
I changed the Recovery.mk in /device/asus/tf700t
The original
Code:
TF_BLOBIFIER := $(HOST_OUT_EXECUTABLES)/blobpack_tfp
LZMA_BIN := /usr/bin/lzma
$(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTIMG) \
$(recovery_ramdisk) \
$(TF_BLOBIFIER) \
$(recovery_kernel)
@echo ----- Compressing recovery ramdisk with lzma ------
rm -f $(recovery_uncompressed_ramdisk).lzma
$(LZMA_BIN) $(recovery_uncompressed_ramdisk)
$(hide) cp $(recovery_uncompressed_ramdisk).lzma $(recovery_ramdisk)
@echo ----- Making recovery image ------
$(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) --output [email protected]
$(TF_BLOBIFIER) [email protected] SOS [email protected]
@echo ----- Made recovery image -------- [email protected]
$(hide) $(call assert-max-image-size,[email protected],$(BOARD_RECOVERYIMAGE_PARTITION_SIZE),raw)
$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(TF_BLOBIFIER)
$(call pretty,"Target boot image: [email protected]")
$(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) --output [email protected]
$(TF_BLOBIFIER) [email protected] LNX [email protected]
$(hide) $(call assert-max-image-size,[email protected],$(BOARD_BOOTIMAGE_PARTITION_SIZE),raw)
give me
Code:
/usr/bin/lzma : /home/maxime/test/out/target/product/tf700t/ramdisk-recovery.cpio: Aucun fichier ou dossier de ce type
make: *** [/home/maxime/test/out/target/product/tf700t/recovery.img] Erreur 1
make: *** Attente des tâches non terminées....
####make failed to build some targets (30:30 (mm:ss)) ####
and the modified
Code:
TF_BLOBIFIER := $(HOST_OUT_EXECUTABLES)/blobpack_tfp
$(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTIMG) \
$(recovery_ramdisk) \
$(TF_BLOBIFIER) \
$(recovery_kernel)
@echo ----- Making recovery image ------
$(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) --output [email protected]
$(TF_BLOBIFIER) [email protected] SOS [email protected]
@echo ----- Made recovery image -------- [email protected]
$(hide) $(call assert-max-image-size,[email protected],$(BOARD_RECOVERYIMAGE_PARTITION_SIZE),raw)
$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(TF_BLOBIFIER)
$(call pretty,"Target boot image: [email protected]")
$(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) --output [email protected]
$(TF_BLOBIFIER) [email protected] LNX [email protected]
$(hide) $(call assert-max-image-size,[email protected],$(BOARD_BOOTIMAGE_PARTITION_SIZE),raw)
give me
Code:
----- Making recovery image ------
/home/maxime/test/out/host/linux-x86/bin/mkbootimg --kernel /home/maxime/test/out/target/product/tf700t/kernel --ramdisk /home/maxime/test/out/target/product/tf700t/ramdisk-recovery.img --cmdline "androidboot.selinux=enforcing" --base 0x10000000 --output /home/maxime/test/out/target/product/tf700t/recovery.img.orig
/home/maxime/test/out/host/linux-x86/bin/blobpack_tfp /home/maxime/test/out/target/product/tf700t/recovery.img SOS /home/maxime/test/out/target/product/tf700t/recovery.img.orig
Found 1 partitions as commandline arguments
Partname: SOS Filename: /home/maxime/test/out/target/product/tf700t/recovery.img.orig
Size: 60
1 partitions starting at offset 0x3C
Offset: 76
----- Made recovery image -------- /home/maxime/test/out/target/product/tf700t/recovery.img
/home/maxime/test/out/target/product/tf700t/recovery.img maxsize=8562048 blocksize=4224 total=9359464 reserve=88704
error: /home/maxime/test/out/target/product/tf700t/recovery.img too large (9359464 > [8650752 - 88704])
make: *** [/home/maxime/test/out/target/product/tf700t/recovery.img] Erreur 1
make: *** Destruction du fichier « /home/maxime/test/out/target/product/tf700t/recovery.img »
#### make failed to build some targets (01:25 (mm:ss)) ####
Ideas ?
maxou2600 said:
Thank you
Yep' i tried it unsuccessfully...
i Think that a lot of files were corrupted (Bad ADSL connection, with lot of FEC, HEC and CRC...)
I removed the "test" folder and resync all the files during the night (about 15-20GB)
Now after half an hour i have that error
Code:
/usr/bin/lzma : /home/maxime/test/out/target/product/tf700t/ramdisk-recovery.cpio: Aucun fichier ou dossier de ce type
make: *** [/home/maxime/test/out/target/product/tf700t/recovery.img] Erreur 1
make: *** Attente des tâches non terminées....
####make failed to build some targets (30:27 (mm:ss)) ####
in folder ~/test/out/target/product/tf700t i found a file called "ramdisk-recovery.img", i renamed it to "ramdisk-recovery.cpio" but i think it was not the same file because now i have this error.
Code:
mkdir -p /home/maxime/test/out/target/product/tf700t/obj/PACKAGING/recovery_patch_intermediates/
PATH=/home/maxime/test/out/host/linux-x86/bin:$PATH /home/maxime/test/out/host/linux-x86/bin/imgdiff /home/maxime/test/out/target/product/tf700t/boot.img /home/maxime/test/out/target/product/tf700t/recovery.img /home/maxime/test/out/target/product/tf700t/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p
source and target don't have same number of chunks!
source chunks:
chunk 0: type 0 start 0 len 4253810
chunk 1: type 2 start 4253810 len 1161984
chunk 2: type 0 start 4927508 len 84
target chunks:
chunk 0: type 0 start 0 len 7227496
make: *** [/home/maxime/test/out/target/product/tf700t/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p] Erreur 1
make: *** Attente des tâches non terminées....
So, i "make clean" and "brunch" again. I tell you if the first error (No such File or directory) re-comes (no-reason )
yep' same as this morning :
Code:
/usr/bin/lzma : /home/maxime/test/out/target/product/tf700t/ramdisk-recovery.cpio: Aucun fichier ou dossier de ce type
make: *** [/home/maxime/test/out/target/product/tf700t/recovery.img] Erreur 1
make: *** Attente des tâches non terminées....
####make failed to build some targets (30:30 (mm:ss)) ####
EDIT : At the begin of the build i got some errors (I Don't know if it's a problem, i think it's not otherwise build stop like (Ramdisk-recovery.cpio error...) :
Code:
No private recovery resources for TARGET_DEVICE tf700t
"ebtables is disabled on this build"
After some research i think that the "ramdisk_recovery" isn't "created" during the build.
I changed the Recovery.mk in /device/asus/tf700t
The original
Code:
TF_BLOBIFIER := $(HOST_OUT_EXECUTABLES)/blobpack_tfp
LZMA_BIN := /usr/bin/lzma
$(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTIMG) \
$(recovery_ramdisk) \
$(TF_BLOBIFIER) \
$(recovery_kernel)
@echo ----- Compressing recovery ramdisk with lzma ------
rm -f $(recovery_uncompressed_ramdisk).lzma
$(LZMA_BIN) $(recovery_uncompressed_ramdisk)
$(hide) cp $(recovery_uncompressed_ramdisk).lzma $(recovery_ramdisk)
@echo ----- Making recovery image ------
$(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) --output [email protected]
$(TF_BLOBIFIER) [email protected] SOS [email protected]
@echo ----- Made recovery image -------- [email protected]
$(hide) $(call assert-max-image-size,[email protected],$(BOARD_RECOVERYIMAGE_PARTITION_SIZE),raw)
$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(TF_BLOBIFIER)
$(call pretty,"Target boot image: $@")
$(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) --output [email protected]
$(TF_BLOBIFIER) [email protected] LNX [email protected]
$(hide) $(call assert-max-image-size,[email protected],$(BOARD_BOOTIMAGE_PARTITION_SIZE),raw)
give me
Code:
/usr/bin/lzma : /home/maxime/test/out/target/product/tf700t/ramdisk-recovery.cpio: Aucun fichier ou dossier de ce type
make: *** [/home/maxime/test/out/target/product/tf700t/recovery.img] Erreur 1
make: *** Attente des tâches non terminées....
####make failed to build some targets (30:30 (mm:ss)) ####
and the modified
Code:
TF_BLOBIFIER := $(HOST_OUT_EXECUTABLES)/blobpack_tfp
$(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTIMG) \
$(recovery_ramdisk) \
$(TF_BLOBIFIER) \
$(recovery_kernel)
@echo ----- Making recovery image ------
$(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) --output [email protected]
$(TF_BLOBIFIER) [email protected] SOS [email protected]
@echo ----- Made recovery image -------- [email protected]
$(hide) $(call assert-max-image-size,[email protected],$(BOARD_RECOVERYIMAGE_PARTITION_SIZE),raw)
$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(TF_BLOBIFIER)
$(call pretty,"Target boot image: [email protected]")
$(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) --output [email protected]
$(TF_BLOBIFIER) [email protected] LNX [email protected]
$(hide) $(call assert-max-image-size,[email protected],$(BOARD_BOOTIMAGE_PARTITION_SIZE),raw)
give me
Code:
----- Making recovery image ------
/home/maxime/test/out/host/linux-x86/bin/mkbootimg --kernel /home/maxime/test/out/target/product/tf700t/kernel --ramdisk /home/maxime/test/out/target/product/tf700t/ramdisk-recovery.img --cmdline "androidboot.selinux=enforcing" --base 0x10000000 --output /home/maxime/test/out/target/product/tf700t/recovery.img.orig
/home/maxime/test/out/host/linux-x86/bin/blobpack_tfp /home/maxime/test/out/target/product/tf700t/recovery.img SOS /home/maxime/test/out/target/product/tf700t/recovery.img.orig
Found 1 partitions as commandline arguments
Partname: SOS Filename: /home/maxime/test/out/target/product/tf700t/recovery.img.orig
Size: 60
1 partitions starting at offset 0x3C
Offset: 76
----- Made recovery image -------- /home/maxime/test/out/target/product/tf700t/recovery.img
/home/maxime/test/out/target/product/tf700t/recovery.img maxsize=8562048 blocksize=4224 total=9359464 reserve=88704
error: /home/maxime/test/out/target/product/tf700t/recovery.img too large (9359464 > [8650752 - 88704])
make: *** [/home/maxime/test/out/target/product/tf700t/recovery.img] Erreur 1
make: *** Destruction du fichier « /home/maxime/test/out/target/product/tf700t/recovery.img »
#### make failed to build some targets (01:25 (mm:ss)) ####
Ideas ?
Click to expand...
Click to collapse
Yes, I see exactly what is going on here .....
You need to install lzma on your host PC .....
So in /usr/bin/ you need to find a file called 'lzma'
Removing this from the recovery.mk ...
Code:
LZMA_BIN := /usr/bin/lzma
Has made the recovery to large to fix in the space provided by the device''s recovery partition ......
Code:
error: /home/maxime/test/out/target/product/tf700t/recovery.img too large (9359464 > [8650752 - 88704])
Thx Josh
Hello, I found the solution (thanks to _that in #TWRP IRC )
lzma was in usr/bin, no problem
the problem was that the ramdisk_recovery.cpio file wasn't found, the solution was to edit some lines (in red)
Code:
$(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTIMG) \
$(recovery_[COLOR="Red"]uncompressed_[/COLOR]ramdisk) \
$(TF_BLOBIFIER) \
$(recovery_kernel)
[user=279333]@ECHO[/user] ----- Compressing recovery ramdisk with lzma ------
rm -f $(recovery_uncompressed_ramdisk).lzma
$(LZMA_BIN) $(recovery_uncompressed_ramdisk)
$(hide) cp $(recovery_uncompressed_ramdisk).lzma $(recovery_[COLOR="Red"]uncompressed_[/COLOR]ramdisk)
[user=279333]@ECHO[/user] ----- Making recovery image ------
$(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) --output [email protected]
$(TF_BLOBIFIER) [email protected] SOS [email protected]
[user=279333]@ECHO[/user] ----- Made recovery image -------- [email protected]
$(hide) $(call assert-max-image-size,[email protected],$(BOARD_RECOVERYIMAGE_PARTITION_SIZE),raw)
After that, just needed to erase .ccache folder and make clean. And then recovery.img compiled successfully.
(sorry for bad english).
I will edit the title because it's resolved
please help
maxou2600 said:
Hello, I found the solution (thanks to _that in #TWRP IRC )
lzma was in usr/bin, no problem
the problem was that the ramdisk_recovery.cpio file wasn't found, the solution was to edit some lines (in red)
Code:
$(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTIMG) \
$(recovery_[COLOR="Red"]uncompressed_[/COLOR]ramdisk) \
$(TF_BLOBIFIER) \
$(recovery_kernel)
[user=279333]@ECHO[/user] ----- Compressing recovery ramdisk with lzma ------
rm -f $(recovery_uncompressed_ramdisk).lzma
$(LZMA_BIN) $(recovery_uncompressed_ramdisk)
$(hide) cp $(recovery_uncompressed_ramdisk).lzma $(recovery_[COLOR="Red"]uncompressed_[/COLOR]ramdisk)
[user=279333]@ECHO[/user] ----- Making recovery image ------
$(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) --output [email protected]
$(TF_BLOBIFIER) [email protected] SOS [email protected]
[user=279333]@ECHO[/user] ----- Made recovery image -------- [email protected]
$(hide) $(call assert-max-image-size,[email protected],$(BOARD_RECOVERYIMAGE_PARTITION_SIZE),raw)
After that, just needed to erase .ccache folder and make clean. And then recovery.img compiled successfully.
(sorry for bad english).
I will edit the title because it's resolved
Click to expand...
Click to collapse
i also met the problem that boot.img too large when i compile recovery.img. how do you solve it. sorry for my ban english
Hello, I erased ccache folders and i make clean. After that, all was working fine
i fixed it.but also thank you