Extract: /system/lib/modules/bcmdhd.ko
Extract: /system/usr/keylayout/villec2_keypad.kl
about to run program [/sbin/mkdir] with 2 args
mkdir: can't create directory '/system/etc/init.d': File exists
run_program: child exited with status 1
-- Creating toolbox symlinks
-- Creating additional symlinks
-- Installing busybox
about to run program [/system/xbin/busybox] with 4 args
-- Setting permissions
set_perm: chown of /system/bin/.ext to 0 0 failed: No such file or directory
set_perm: chmod of /system/bin/.ext to 777 failed: No such file or directory
set_perm: chown of /system/bin/.ext/.su to 0 0 failed: No such file or directory
set_perm: chmod of /system/bin/.ext/.su to 6755 failed: No such file or directory
-- Setting One S C2
about to run program [/tmp/model.sh] with 1 args
Installing Kernel
Failed to mount /dev/block/mmcblk0p22 on /system: Invalid argument
emmc mount of /dev/block/mmcblk0p22 failed: Invalid argument
Extract: /system/etc/pnp.xml
wrote boot partition from /tmp/boot.img
Installation Complete!
script result was [Installation Complete!]
Installer Sucessfull (Status 0)
End at : Sun Jan 4 16:19:28 1970
??
I am S-Off and have tried both TWRP and CWM and keep getting - set_metadata: some changes failed Installer Error (Status 7). I have also tried Venom ROM to and get the same error. Should I go stock and re root, it seems like the installer isnt getting access to the directories? Thanks
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : Android Revolution HD
ROM Version : 9.1
ROM Author : mike1986
Device : HTC One (M8)
Start at : Tue Jul 15 23:27:55 2014
I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
load_volume_table: Can't get the /proc/emmc table
=================================
Android Revolution HD by mike1986
=================================
>>> Formatting partitions
about to run program [/sbin/umount] with 2 args
umount: can't umount /system: Invalid argument
run_program: child exited with status 1
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Warning: the fs_type small is not defined in mke2fs.conf
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
5632 inodes, 22528 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=25165824
1 block group
32768 blocks per group, 32768 fragments per group
5632 inodes per group
Writing inode tables: 0/1done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 21 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p47 on /cache failed: Device or resource busy
run_program: child exited with status 255
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p48 on /data failed: Device or resource busy
run_program: child exited with status 255
about to run program [/tmp/wipe.sh] with 1 args
>>> Mounting partitions
about to run program [/sbin/mount] with 2 args
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p48 on /data failed: Device or resource busy
run_program: child exited with status 255
>>> Cleaning process
about to run program [/tmp/clean.sh] with 1 args
>>> Writing Data & System
about to run program [/sbin/busybox] with 5 args
about to run program [/sbin/sync] with 1 args
>>> Copying U.S. Verizon related files
>>> Installing Google Chrome
>>> Installing Google Maps & Google Street
>>> Installing Google Music
>>> Installing Google Plus
>>> Installing Google Now
>>> Installing Google Keep
>>> Installing Google Hangouts
>>> Installing Google YouTube
>>> Installing Google Drive
>>> Installing ES File Explorer
>>> Installing Facebook
>>> Installing Adobe Flash Player
>>> Installing Adobe Reader
>>> Installing Twitter
>>> Installing EXT4 Performance Tweak
about to run program [/tmp/ext4] with 1 args
tune2fs 1.42.9 (28-Dec-2013)
tune2fs 1.42.9 (28-Dec-2013)
tune2fs 1.42.9 (28-Dec-2013)
>>> Installing SQLite Tweaks
>>> Installing Seeder
>>> Installing Bytecode Verification disabler
about to run program [/tmp/dalvik.sh] with 1 args
>>> Installing Sense 6 Toolbox & Xposed
>>> Installing Harman & Kardon Sound Mod
about to run program [/tmp/hk.sh] with 1 args
sed: write error
sed: write error
run_program: child exited with status 4
>>> Creating toolbox symlinks
>>> Creating additional symlinks
>>> Installing busybox
about to run program [/system/xbin/busybox] with 4 args
>>> Setting permissions
ApplyParsedPerms: setcap of /system/bin/run-as to c0 failed: No space left on device
script aborted: set_metadata: some changes failed
set_metadata: some changes failed
Installer Error (Status 7)
End at : Tue Jul 15 23:29:11 2014
Adabow12 said:
I am S-Off and have tried both TWRP and CWM and keep getting - set_metadata: some changes failed Installer Error (Status 7). I have also tried Venom ROM to and get the same error. Should I go stock and re root, it seems like the installer isnt getting access to the directories? Thanks
End at : Tue Jul 15 23:29:11 2014
Click to expand...
Click to collapse
You s-off an have flashed SuperSU in twrp? Also uninstalled weak sauce an SuperSU prior?
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Tigerstown said:
You s-off an have flashed SuperSU in twrp? Also uninstalled weak sauce an SuperSU prior?
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes weaksauce is uninstalled and I installed SuperSU in CWM and it is working correctly from what I can see.I can run apps that need SU access. I have also made sure I installed the VZW TWRP and CWM and no success on either. I just got this phone 2 days ago.
Adabow12 said:
Yes weaksauce is uninstalled and I installed SuperSU in CWM and it is working correctly from what I can see.I can run apps that need SU access. I have also made sure I installed the VZW TWRP and CWM and no success on either. I just got this phone 2 days ago.
Click to expand...
Click to collapse
So I just answered my own question. I had been trying to install the ROM from the SD card and figured I would copy to the internal SD and give it a shot and that fixed the issues and the ROM installed no problem. Hope this helps anyone else out there having this problem. Thanks
Hello,
(English is not my mother tongue but I’ll try to do my best )
I don’t usually ask for help and do my own researchs, but I reached a dead end! So I need some experts here
My Nexus got stolen 3 days ago, so I took back my HTC Sensation from the drawer to use it again for some time. When I was using it before, I flashed 3 or 4 differents roms, I updated the firmware, and so on… Never had a single problem, but I don’t know what I did when I switched with my Nexus, but when I tried to power on my Sensation today, it got stuck on cyanogen boot.
I tried to access the recovery (4ext recovery touch) with ADB, and it worked, so I was kind of relieved! I wiped everything I needed to wipe (following instructions for the rom) and that was unusually long! VERY long! In my memories it took only few minutes to do that, and now it takes 1 hour (actually every action I perform with the recovery takes at least 50 minutes. Was not the case before)! But it goes all the way and I had a success message, so okay.
I tried to flash the rom again (the one I had before and knew it worked), it took once again a very long time to install, but success message at the end. I rebooted and... still stuck on boot loop.
I, then, tried to change the recovery (from 4ext to twrp) (with fastboot), everything went fine (no error during the process), when I rebooted, I was still with the same recovery (4ext). (I also tried to access directly to the recovery without rebooting because I read it was maybe because of the reboot but it’s the same).
I also tried to change the firmware (PG58IMG) from 3.33 to 3.32, I flashed it, process is okay, I rebooted, and… still on 3.33
I finally tried to flash an official ROM from HTC, it worked once again during the process, but the boot screen was… Cyanogen boot, and still boot loop ???
So, I can do anything I want, I don’t get any message of errors, but nothing changes! Nor the firmeware, nor the recovery, nor the rom (which doesn’t work). I’m completely stuck… I tried, and tried again… No apparent changes on my phone.
My last attempt was going to be with RUU, but I can’t find one that fits my configuration :/
Thank you for any help, I’m desesperate :/
For information, this is what my bootloader looks like :
-Firmware-3.33-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012, 17:33:34
EDIT :
Before I post this, I tried one last thing :
In the recovery (4ext), I formatted all partitions (except sdcard) - no error during the process.
But when I check the info I have :
mount point | fs | size | free
system | ext4 | 787.4mb | 295.4mb
data | ext4 | 1.1gb | 132.0mb
cache | ext4 | 118.1mb | 114.0mb
sdcard | fat32 | 7.2gb | 4.3gb
Current ROM : 11-20140525-Sultan-pyramid
How is that possible? I just wiped everything, and it did nothing. :crying:
since you are on S-OFF you can use any ruu you want
here is the latest 4ext recovery version
http://d-h.st/rG7
extarct the recovery.img and flash it via fatsboot
then try to wipe again
Ok, I flashed it like you said, but once again, no changes! I'm still on the version 1.0.0.6 RC2 (and not RC3)
I'm going to try with a RUU
did the info change in recovery? u know system,cache, current rom info etc? coz when u full wipe then check info it doesnt change untill u reboot recovery.
No the info doesn't change. Even after a reboot.
Okay so I tried with RUU. First with the .exe file : Everything goes well until the first step when the RUU wants to reload to the bootloader. I have an error 171. I don't think it's a driver problem because it recognized the phone before that step.
1. I am in fastboot usb.
2. I execute the .exe
3. It finds the phone and ask me to update
4. RUU says "reboot in bootloader" - my phone turns off
5. RUU says "waiting for bootloader" - my phone does not turn on in bootloader
6. RUU says 'failed error 171 usb connection error"
So I guess once the phone is turned off, it can't find it anymore. During the "waiting for bootloader" step, I also tried to help the RUU and rebooting to the bootloader myself (either with adb and the combination VOLUME - and Power on), the phone restart but the RUU doesn't detect the bootloader and fails.
I tried to flash the RUU manually as well, with PG58IMG in the bootloader, but the phone turns off before the process is finished, and changes nothing.
And with adb, I'm stuck when I ask to "fastboot oem rebootRUU". The phone turns off and doesn't reboot into RUU mode.
(I followed this guide (4.4.2 With a PC, via fastboot USB) : http://forum.xda-developers.com/showthread.php?t=1672425)
EDIT : Different problem now : The RUU can reboot my phone, but not in RUU mode, my phone restart to the bootloop (the rom which doesn't work)
I retrieved the recovery.log from 4ext for a ROM I tried to flash a couple of days ago, and I see a lot of "failed to" - "not such file or directory" - "read-only file system" - "unmount of /system failed" - ... So I put it here maybe it could help to understand the problem!
Code:
Starting recovery on Fri Jan 2 00:00:00 1970
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (540 x 960)
Welcome to 4EXT Recovery Touch
by madmaxx82
I:start load volumes..
Preparing boot.. 0 Preparing boot.. 0 Preparing boot.. 0 Preparing boot.. 0 Preparing boot.. 0 Preparing boot.. 1I:st.f_bsize: 4096
I:st.f_bsize: 4096
Preparing boot.. 1 Preparing boot.. 1recovery filesystem table
=========================
0 /tmp ramdisk (null) (null)
1 /recovery emmc /dev/block/mmcblk0p21 (null)
2 /boot emmc /dev/block/mmcblk0p20 (null)
3 /cache ext4 /dev/block/mmcblk0p24 (null)
4 /data ext4 /dev/block/mmcblk0p23 (null)
5 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
6 /system ext4 /dev/block/mmcblk0p22 (null)
7 /misc emmc /dev/block/mmcblk0p31 (null)
I:end load volumes..
I:Completed outputting fstab.
I:Processing arguments.
I:Checking arguments.
Command: "/sbin/recovery"
ro.build.date=Thu May 8 17:34:43 CEST 2014
ro.build.date.utc=0
ro.product.model=HTC Sensation
ro.product.brand=htc
ro.product.name=htc_pyramid
ro.product.device=pyramid
ro.product.board=pyramid
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.board.platform=msm8660
ro.build.product=pyramid
ro.com.android.dateformat=MM-dd-yyyy
net.bt.name=Android
ro.serialno=SH1BTV809020
ro.baseband=11.24A.3504.31_M
ro.carrier=HTC-FRA
ro.bootloader=1.27.1100
ro.cid=HTC__203
ro.mid=PG5813000
init.svc.choice_fn=stopped
init.svc.htcbatt=running
init.svc.adbd=running
init.svc.recovery=running
ext.version="1006.2.0"
ext.feature.version_check=yes
ext.build=33
ext.edition=ng
I:preparing..
Preparing boot.. 1I:prep sys1: 0
Preparing boot.. 1 Preparing boot.. 2 Preparing boot.. 2 Preparing boot.. 2 Preparing boot.. 2 Preparing boot.. 2 Preparing boot.. 3 Preparing boot.. 3I:preparing.. fin
Preparing boot.. 3 Configuring settings..
Your configuration settings:
Using button backlights level: 90
4EXT SmartFlash: enabled
Restore: MD5Sum checks: enabled
Backups: generate MD5Sums: enabled
Backups: mode: tar
Backups: exclude /cache: disabled
Backups: exclude dalvik-cache: disabled
Preserve theme: enabled
Hide useless directories: disabled
Haptic feedback: enabled
Haptic feedback strength: 25
Timezone: configured
Using 24h-hour time format
I:theme propok
Recovery is ready..
I:have tz_data
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
About to install:
Sensation_3.33.401.53_odexed.zip
Continue install?
-- Installing: /sdcard/Sensation_3.33.401.53_odexed.zip
Finding update package...
I:Update location: /sdcard/Sensation_3.33.401.53_odexed.zip
Opening update package...
Installing update...
unmount of /system failed; no such volume
Creating filesystem with parameters:
Size: 838859776
Block size: 4096
Blocks per group: 32768
Inodes per group: 7315
Inode size: 256
Journal blocks: 3200
Label:
Blocks: 204799
Block groups: 7
Reserved block group size: 55
Created filesystem with 11/51205 inodes and 6651/204799 blocks
===============================================
| Android Revolution HD |
| by mike1986 |
| Be patient - 1st boot may take a while |
===============================================
>>> Formatting partitions
(system is unmounted already)
Creating filesystem with parameters:
Size: 125787136
Block size: 4096
Blocks per group: 32768
Inodes per group: 7677
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 30709
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/7677 inodes and 1518/30709 blocks
>>> Mounting partitions
>>> Cleaning process
minzip: Extracted file "/system/app/AdobeReader.apk"
minzip: Extracted file "/system/app/AppSharing.apk"
minzip: Extracted file "/system/app/AppSharing.odex"
minzip: Extracted file "/system/app/ApplicationsProvider.apk"
minzip: Extracted file "/system/app/ApplicationsProvider.odex"
minzip: Extracted file "/system/app/BackupRestoreConfirmation.apk"
minzip: Extracted file "/system/app/BackupRestoreConfirmation.odex"
>>> Writing Data & System
minzip: Extracted file "/system/app/BlueSky.apk"
minzip: Extracted file "/system/app/Bluetooth.apk"
minzip: Extracted file "/system/app/Bluetooth.odex"
minzip: Extracted file "/system/app/BrcmBluetoothServices.apk"
minzip: Extracted file "/system/app/BrcmBluetoothServices.odex"
minzip: Error touching "/system/app/Browser.apk"
>>> Creating toolbox symlinks
symlink: failed to remove /system/bin/cat: Read-only file system
symlink: failed to symlink /system/bin/cat to toolbox: File exists
symlink: failed to remove /system/bin/chmod: Read-only file system
symlink: failed to symlink /system/bin/chmod to toolbox: File exists
symlink: failed to remove /system/bin/chown: Read-only file system
symlink: failed to symlink /system/bin/chown to toolbox: File exists
symlink: failed to remove /system/bin/cmp: Read-only file system
symlink: failed to symlink /system/bin/cmp to toolbox: File exists
symlink: failed to remove /system/bin/date: Read-only file system
symlink: failed to symlink /system/bin/date to toolbox: File exists
symlink: failed to remove /system/bin/dd: Read-only file system
symlink: failed to symlink /system/bin/dd to toolbox: File exists
symlink: failed to remove /system/bin/df: Read-only file system
symlink: failed to symlink /system/bin/df to toolbox: File exists
symlink: failed to remove /system/bin/dmesg: Read-only file system
symlink: failed to symlink /system/bin/dmesg to toolbox: File exists
symlink: failed to remove /system/bin/getevent: Read-only file system
symlink: failed to symlink /system/bin/getevent to toolbox: File exists
symlink: failed to remove /system/bin/getprop: Read-only file system
symlink: failed to symlink /system/bin/getprop to toolbox: File exists
symlink: failed to remove /system/bin/hd: Read-only file system
symlink: failed to symlink /system/bin/hd to toolbox: File exists
symlink: failed to remove /system/bin/id: Read-only file system
symlink: failed to symlink /system/bin/id to toolbox: File exists
symlink: failed to remove /system/bin/ifconfig: Read-only file system
symlink: failed to symlink /system/bin/ifconfig to toolbox: File exists
symlink: failed to remove /system/bin/iftop: Read-only file system
symlink: failed to symlink /system/bin/iftop to toolbox: File exists
symlink: failed to remove /system/bin/insmod: Read-only file system
symlink: failed to symlink /system/bin/insmod to toolbox: File exists
symlink: failed to remove /system/bin/ioctl: Read-only file system
symlink: failed to symlink /system/bin/ioctl to toolbox: File exists
symlink: failed to remove /system/bin/ionice: Read-only file system
symlink: failed to symlink /system/bin/ionice to toolbox: File exists
symlink: failed to remove /system/bin/kill: Read-only file system
symlink: failed to symlink /system/bin/kill to toolbox: File exists
symlink: failed to remove /system/bin/ln: Read-only file system
symlink: failed to symlink /system/bin/ln to toolbox: File exists
symlink: failed to remove /system/bin/log: Read-only file system
symlink: failed to symlink /system/bin/log to toolbox: File exists
symlink: failed to remove /system/bin/ls: Read-only file system
symlink: failed to symlink /system/bin/ls to toolbox: File exists
symlink: failed to remove /system/bin/lsmod: Read-only file system
symlink: failed to symlink /system/bin/lsmod to toolbox: File exists
symlink: failed to remove /system/bin/lsof: Read-only file system
symlink: failed to symlink /system/bin/lsof to toolbox: File exists
symlink: failed to remove /system/bin/mkdir: Read-only file system
symlink: failed to symlink /system/bin/mkdir to toolbox: File exists
symlink: failed to remove /system/bin/mount: Read-only file system
symlink: failed to symlink /system/bin/mount to toolbox: File exists
symlink: failed to remove /system/bin/mv: Read-only file system
symlink: failed to symlink /system/bin/mv to toolbox: File exists
symlink: failed to remove /system/bin/nandread: Read-only file system
symlink: failed to symlink /system/bin/nandread to toolbox: File exists
symlink: failed to remove /system/bin/netstat: Read-only file system
symlink: failed to symlink /system/bin/netstat to toolbox: File exists
symlink: failed to remove /system/bin/newfs_msdos: Read-only file system
symlink: failed to symlink /system/bin/newfs_msdos to toolbox: File exists
symlink: failed to remove /system/bin/notify: Read-only file system
symlink: failed to symlink /system/bin/notify to toolbox: File exists
symlink: failed to remove /system/bin/printenv: Read-only file system
symlink: failed to symlink /system/bin/printenv to toolbox: File exists
symlink: failed to remove /system/bin/ps: Read-only file system
symlink: failed to symlink /system/bin/ps to toolbox: File exists
symlink: failed to remove /system/bin/reboot: Read-only file system
symlink: failed to symlink /system/bin/reboot to toolbox: File exists
symlink: failed to remove /system/bin/renice: Read-only file system
symlink: failed to symlink /system/bin/renice to toolbox: File exists
symlink: failed to remove /system/bin/rm: Read-only file system
symlink: failed to symlink /system/bin/rm to toolbox: File exists
symlink: failed to remove /system/bin/rmdir: Read-only file system
symlink: failed to symlink /system/bin/rmdir to toolbox: File exists
symlink: failed to remove /system/bin/rmmod: Read-only file system
symlink: failed to symlink /system/bin/rmmod to toolbox: File exists
symlink: failed to remove /system/bin/route: Read-only file system
symlink: failed to symlink /system/bin/route to toolbox: File exists
symlink: failed to remove /system/bin/schedtop: Read-only file system
symlink: failed to symlink /system/bin/schedtop to toolbox: File exists
symlink: failed to remove /system/bin/sendevent: Read-only file system
symlink: failed to symlink /system/bin/sendevent to toolbox: File exists
symlink: failed to remove /system/bin/setconsole: Read-only file system
symlink: failed to symlink /system/bin/setconsole to toolbox: File exists
symlink: failed to remove /system/bin/setprop: Read-only file system
symlink: failed to symlink /system/bin/setprop to toolbox: File exists
symlink: failed to remove /system/bin/sleep: Read-only file system
symlink: failed to symlink /system/bin/sleep to toolbox: File exists
symlink: failed to remove /system/bin/smd: Read-only file system
symlink: failed to symlink /system/bin/smd to toolbox: File exists
symlink: failed to remove /system/bin/start: Read-only file system
symlink: failed to symlink /system/bin/start to toolbox: File exists
symlink: failed to remove /system/bin/stop: Read-only file system
symlink: failed to symlink /system/bin/stop to toolbox: File exists
symlink: failed to remove /system/bin/sync: Read-only file system
symlink: failed to symlink /system/bin/sync to toolbox: File exists
symlink: failed to remove /system/bin/top: Read-only file system
symlink: failed to symlink /system/bin/top to toolbox: File exists
symlink: failed to remove /system/bin/touch: Read-only file system
symlink: failed to symlink /system/bin/touch to toolbox: File exists
symlink: failed to remove /system/bin/umount: Read-only file system
symlink: failed to symlink /system/bin/umount to toolbox: File exists
symlink: failed to remove /system/bin/uptime: Read-only file system
symlink: failed to symlink /system/bin/uptime to toolbox: File exists
symlink: failed to remove /system/bin/vmstat: Read-only file system
symlink: failed to symlink /system/bin/vmstat to toolbox: File exists
symlink: failed to remove /system/bin/watchprops: Read-only file system
symlink: failed to symlink /system/bin/watchprops to toolbox: File exists
symlink: failed to remove /system/bin/wipe: Read-only file system
symlink: failed to symlink /system/bin/wipe to toolbox: File exists
symlink: failed to remove /system/bin/sh: Read-only file system
symlink: failed to symlink /system/bin/sh to /system/bin/mksh: File exists
symlink: failed to remove /system/fonts/DroidSans.ttf: Read-only file system
symlink: failed to symlink /system/fonts/DroidSans.ttf to /system/fonts/Roboto-Regular.ttf: File exists
symlink: failed to remove /system/fonts/DroidSans-Bold.ttf: Read-only file system
symlink: failed to symlink /system/fonts/DroidSans-Bold.ttf to /system/fonts/Roboto-Bold.ttf: File exists
symlink: failed to remove /system/vendor/firmware/hdcp.keys: Read-only file system
symlink: failed to symlink /system/vendor/firmware/hdcp.keys to /factory/hdcp.keys: Read-only file system
set_perm: chown of /system/bin/iptables to 0 1000 failed: Read-only file system
set_perm: chmod of /system/bin/iptables to 4750 failed: Read-only file system
set_perm: chown of /system/bin/netcfg to 0 3003 failed: Read-only file system
set_perm: chmod of /system/bin/netcfg to 2750 failed: Read-only file system
set_perm: chown of /system/bin/ping to 0 3004 failed: Read-only file system
set_perm: chmod of /system/bin/ping to 2755 failed: Read-only file system
set_perm: chown of /system/bin/reboot to 0 2000 failed: Read-only file system
set_perm: chmod of /system/bin/reboot to 6755 failed: Read-only file system
set_perm: chown of /system/bin/run-as to 0 2000 failed: Read-only file system
set_perm: chmod of /system/bin/run-as to 6750 failed: Read-only file system
set_perm: chown of /system/bin/tc to 0 1000 failed: Read-only file system
set_perm: chmod of /system/bin/tc to 4750 failed: Read-only file system
set_perm: chown of /system/etc/bluetooth to 0 0 failed: Read-only file system
set_perm: chmod of /system/etc/bluetooth to 755 failed: Read-only file system
set_perm: chown of /system/etc/bluetooth/a2dp_avrcp.conf to 0 0 failed: No such file or directory
set_perm: chmod of /system/etc/bluetooth/a2dp_avrcp.conf to 644 failed: No such file or directory
set_perm: chown of /system/etc/bluetooth/auto_pairing.conf to 1000 1000 failed: No such file or directory
set_perm: chmod of /system/etc/bluetooth/auto_pairing.conf to 640 failed: No such file or directory
set_perm: chown of /system/etc/bluetooth/blacklist.conf to 3002 3002 failed: No such file or directory
set_perm: chmod of /system/etc/bluetooth/blacklist.conf to 444 failed: No such file or directory
set_perm: chown of /system/etc/dbus.conf to 1002 1002 failed: No such file or directory
set_perm: chmod of /system/etc/dbus.conf to 440 failed: No such file or directory
set_perm: chown of /system/etc/dhcpcd/dhcpcd-run-hooks to 1014 2000 failed: Read-only file system
set_perm: chmod of /system/etc/dhcpcd/dhcpcd-run-hooks to 550 failed: Read-only file system
set_perm: chown of /system/etc/init.goldfish.sh to 0 2000 failed: No such file or directory
set_perm: chmod of /system/etc/init.goldfish.sh to 550 failed: No such file or directory
set_perm: chown of /system/etc/init.qcom.sdio.sh to 1000 1000 failed: No such file or directory
set_perm: chmod of /system/etc/init.qcom.sdio.sh to 555 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/left_eye-y0-yi45-p0-pi45-r0-ri20.2d_n2/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/left_eye-y0-yi45-p0-pi45-r0-ri20.2d_n2/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/left_eye-y0-yi45-p0-pi45-rn7-ri20.2d_n2/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/left_eye-y0-yi45-p0-pi45-rn7-ri20.2d_n2/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/left_eye-y0-yi45-p0-pi45-rp7-ri20.2d_n2/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/left_eye-y0-yi45-p0-pi45-rp7-ri20.2d_n2/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/nose_base-y0-yi45-p0-pi45-r0-ri20.2d_n2/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/nose_base-y0-yi45-p0-pi45-r0-ri20.2d_n2/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/nose_base-y0-yi45-p0-pi45-rn7-ri20.2d_n2/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/nose_base-y0-yi45-p0-pi45-rn7-ri20.2d_n2/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/nose_base-y0-yi45-p0-pi45-rp7-ri20.2d_n2/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/nose_base-y0-yi45-p0-pi45-rp7-ri20.2d_n2/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/right_eye-y0-yi45-p0-pi45-r0-ri20.2d_n2/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/right_eye-y0-yi45-p0-pi45-r0-ri20.2d_n2/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/right_eye-y0-yi45-p0-pi45-rn7-ri20.2d_n2/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/right_eye-y0-yi45-p0-pi45-rn7-ri20.2d_n2/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/right_eye-y0-yi45-p0-pi45-rp7-ri20.2d_n2/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/multi_pose_face_landmark_detectors.3/right_eye-y0-yi45-p0-pi45-rp7-ri20.2d_n2/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/yaw_roll_face_detectors.3/head-y0-yi45-p0-pi45-r0-ri30.4a/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/yaw_roll_face_detectors.3/head-y0-yi45-p0-pi45-r0-ri30.4a/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/yaw_roll_face_detectors.3/head-y0-yi45-p0-pi45-rn30-ri30.5/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/yaw_roll_face_detectors.3/head-y0-yi45-p0-pi45-rn30-ri30.5/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/detection/yaw_roll_face_detectors.3/head-y0-yi45-p0-pi45-rp30-ri30.5/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/detection/yaw_roll_face_detectors.3/head-y0-yi45-p0-pi45-rp30-ri30.5/full_model.bin to 644 failed: No such file or directory
set_perm: chown of /system/vendor/pittpatt/models/recognition/face.face.y0-y0-22-b-N/full_model.bin to 0 0 failed: No such file or directory
set_perm: chmod of /system/vendor/pittpatt/models/recognition/face.face.y0-y0-22-b-N/full_model.bin to 644 failed: No such file or directory
>>> Creating additional symlinks
>>> Setting permissions
>>> Flashing boot.img
>>> Unmounting partitions
about to run program [/sbin/busybox] with 4 args
Hello,
I'm making a port of a ROM and when I flash it with TWRP (Latest Release) it says he can't symlink.
I get the log and I seen the system partition is full (The ROM size is about 1,8 GO)
Code:
failed to mkdir /system/app/OpenWnn/lib: No space left on device
symlink: failed to symlink /system/app/OpenWnn/lib to /system/lib/libWnnEngDic.so: making parents failed
symlink: failed to symlink /system/app/OpenWnn/lib to /system/lib/libWnnEngDic.so: No such file or directory
script aborted: symlink: some symlinks failed
symlink: some symlinks failed
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/updatus.zip'
Error flashing zip '/sdcard/updatus.zip'
Updating partition details...
I:Data backup size is 0MB, free: 26545MB.
My question is: Can I extend system partition ?
Thanks,
Marwanpro
iam getting the below specified error while updating the Rom cm-13.0- NIGHTLY-otus to cm-14.1-20161216-NIGHTLY-otus on Motorola E 2015 3G.
i tried update it via recovery and cm updater but getting same error..
i got this error :
Installing '/data/media/0/cmupdater/cm-14.1-20161216-NIGHTLY-otus.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
Target: 1481879506
Target: 1481879506
could not detect filesystem for /dev/block/bootdevice/by-name/system, assuming ext4
could not detect filesystem for /dev/block/bootdevice/by-name/system, assuming ext4
mount: failed to mount /dev/block/bootdevice/by-name/system at /system: No such file or directory
mount: failed to mount /dev/block/bootdevice/by-name/system at /system: No such file or directory
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
run_program: child exited with status 127
unmount of /system failed; no such volume
unmount of /system failed; no such volume
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
Patching system image unconditionally...
performing update
open "/dev/block/bootdevice/by-name/system" failed: No such file or directory
script aborted: E1001: Failed to update system image.
Patching system image unconditionally...
E1001: Failed to update system image.
E:unknown command [log]
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/data/media/0/cmupdater/cm-14.1-20161216-NIGHTLY-otus.zip'
E:Error installing zip file '/data/media/0/cmupdater/cm-14.1-20161216-NIGHTLY-otus.zip'
Done processing script file
any help.. Thanx