TWRP not flashing zips - Galaxy Tab 2 Q&A, Help & Troubleshooting

Hey im sure that this is my fault. But i odined back to mk3 on my p3113 (tab 2 7.0) and rooted with cf auto root. Worked fine i have root. Flashed android andis twrp 2.8.7.2. Im able to boot into twrp but everytime i flash a zip the recovery just restarts. Then i tried philz touch and after flashing zip it fails and says (bad). Ive tried multiple zips. I could use some advice. Thanks

Update; Ive found that after odin my device is saying when failing to flash that device is expressorf rather than expressowifi. Thinking thats the issue, having trouble finding any other odin package. Could someone direct me to the usa package or tell me what im doing wrong. Also build prop says correct expresaowifi

Sigh.. 12 hours later... Im a dumbass. P3110 and P3100. Mixed up the files

Related

[Q] Help! N8010 stuck at samsung logo.

hi all, I'm trying to upgrade to KK with a stock/official fw; linky via odin 3.07. I am able to flash successfully, the tablet restarts and then just sits at the Samsung "blue oval thing"
I've tried TWRP touch 2.8.0.1 to install Gnabo 6.5, following instructions of Here, using "Installation for N801x". All has gone as expected until I tried to install the bootloader section, TWRP crashes to bootloop each time.
I've tried re-downloading the bootloader as well as clean flash of KK and using CWM touch 6.0.3.6 in place of TWRP; same result.
I have a backup of 4.0.something, but i want 4.4.2. Any suggestions are welcomed, TIA.
check bootlader version
daniel302010 said:
hi all, I'm trying to upgrade to KK with a stock/official fw; linky via odin 3.07. I am able to flash successfully, the tablet restarts and then just sits at the Samsung "blue oval thing"
I've tried TWRP touch 2.8.0.1 to install Gnabo 6.5, following instructions of Here, using "Installation for N801x". All has gone as expected until I tried to install the bootloader section, TWRP crashes to bootloop each time.
I've tried re-downloading the bootloader as well as clean flash of KK and using CWM touch 6.0.3.6 in place of TWRP; same result.
I have a backup of 4.0.something, but i want 4.4.2. Any suggestions are welcomed, TIA.
Click to expand...
Click to collapse
Did you flash the Leaked n8000 firmware that Changes the Boot-Loader to the knox boot-loader. If so i think you have to flash a 4.4.2 zip with Mobile odin as it does not do a Boot loader check. There are several threads about 8010 Devices STUCK Into using the n8000 firmware only. Then you have to apply the no cell and wifi fix patches. I do not have a 8010 mine is 8013 so i do not have this issue and have not read totally up on it. It just seems this could be your Trouble.
Good Luck
Thanks Erica_Renee,
I've read about this issue in a few threads, I didn't feel it affected me as my bootloader screen
View attachment 2968202
doesn't show anything about Knox.
but, as I'm short on options; why not. So you're saying go back to 4.0.whatever, install mobile odin and flash KK N8010 rather than through odin on desktop?
problem with up rom
Hi guys,
Please help me
last time i used N8013 with revolution hd 10.1, till now i tried up new rom on xda but it's not working, its was hand up at samsung logo, and then i tried re setup CMR Download HighOnAndroid v1 ClockworkMod Recovery 6.0.1.1 and then re up rom revolution again, but it till stop at samsung logo, then i find one rom stock on samfirmware KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_u ser_low_ship.tar but its has a problem ( factory mode has unabale working) and auto turn off wifi, so i dont know how to turn back my best tab before.
Thanks

[Q] Rooting issue!!!

I have a Samsung galaxy Tab2 p3100,
Few dayz back I tried to install a custom rom in it thru CWM, but it was unsuccessfull.
Then I installed back that stock rom that I had backup.
Then I formatted my tab few times.
Then it shows some errorr;!!.
Then I used my phone, but when I opened SuperSU,
It is showing "There is no SU binary installed,and SuperSU cannot install it,This is a problem"
So I flashed again that rooting file thru odin 3 times,
but still itz showing the same error.
So Dev's I kindly request u guyz to provide any solution to this problem.
Its really freaking me out .
Plzzz help me Guyszz....
You may need to flash a stock firmware, something may be borked in system, by updating your firmware and updating your custom recovery it will probably fix issue . After wards root update binary again and flash roms.
Pp.
any other solutions Bro
If something is borked due to a bad flash or bad or wrong download the only way to fix it is to reflash original stock firmware in order to fix it. You then start all over again.
I keep a folder on my pc with all the stuff I need incase this happens.
Pp.
Flash a custom recovery. Download latest SuperSU zip from SuperSu thread and flash in recovery
Send from OnePlus One using Tapatalk

Rooting and TWRP on Galaxy S6 920I version.

I was able to gain root no problem at all but nothing works with getting TWRP to install. I found the right version flashed with Odin and it never boots. I've flashed the kernal as well for this device and nothing. I have the stock ROM so I'm good there but what do I need to do to get TWRP to install on this thing?

[Q] Why I cannot get TWRP?

Gents,
funny question.
I just installed by Odin the very last firmware (COI1) with custom image from here, and
looks like it is locked and now I stuck with the stock ROM...
No chance to put back TWRP...
Before everything was fine.
I tried bootloader from this post, no luck.
Any advice how to get TWRP back or just how to revert to custom image?..
You could just flash TWRP via odin by downloading a flashable zip and to install custom software you'll have to install TWRP or any other custom recovery first. After installing twrp go to install and flash the rom from there. Reply and will help you further!
That's the exact problem: after Odin I still don't have TWRP...

Tried TWPR, CWM = always get "error 7" when trying to install ROMS.

I had some issues with ROMs, so managed to revert back to stock. Now using TWRP, but only after trying with CWM, all ROMS get error 7, "can't install this package on top of incompatible data", and CWM said something about it being the wrong firmware for a "note4" or something.
I don't know what to do, can you flash roms through ODIN? Please note this is an N8010
Thanks for your help
NOTE 4 suggests you are flashing a wrong file for another model .
TWRP CWM and Philz Recovery and High On Android recovery work on N8010 tested all within the last month .
can you flash roms through ODIN? >> Custom roms no only stock tar files .
I've tried the CM 11, the CM 12 and Android revolution ROM, all supposedly work with the N8010. Revolution Rom was the first, installed but made a boot loop after I applied the N8010 compatibility flash. After that the file structure seemed to double - there was a new folder with all the other android directory inside it. I deleted the doubleup, but now I don't know what to do, it's back on stock.
JJEgan said:
NOTE 4 suggests you are flashing a wrong file for another model .
TWRP CWM and Philz Recovery and High On Android recovery work on N8010 tested all within the last month .
can you flash roms through ODIN? >> Custom roms no only stock tar files .
Click to expand...
Click to collapse

Categories

Resources