Please pardon me for any faux pas as I am new here.
Mods please refer me to the appropriate thread and close this one, in case this one is a duplicate.
It seems my Moto G 1 Gen XT1033 is hardbricked. I had been running a CM 12 for falcon - nightly release since May 2015 and had had no problems so far. I had also upgraded my recovery to CWM Touch.
Two weeks ago, my phone got stuck in a boot loop (I now realise that that is called a softbrick), I managed to boot into recovery and updated my OS with the latest nightly release of CM 12 for my phone. I also tried to upgrade the recovery version with the same as that of the OS version but I don't think that it got upgraded. (I'm not sure what it said).
Anyway my phone was working fine for an hour or so until CM gave some errors on opening the themes configuration, so I thought rebooting my phone would solve the problem.
My phone never booted after that. It didn't even turn on or boot into the bootloader/recovery etc. I checked the battery etc. and it was fine. There was no issue with the hardware.
I then connected my phone to my laptop and it recognised it as qhsusb_bulk. I have spent a lot of time searching and trying various methods like:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
http://forum.xda-developers.com/moto-g/orig-development/bootloader-tool-motoflasher-t2959076
Using the MotoTool All In One etc.
I cant seem to figure out the problem. I don't even know what my bootloader version was etc.
Is there a problem with my bootloader or recovery? I can't seem to understand.
Can someone please help me with this?
Thanks
Oh man that's unexpected. I never think CM could cause this. I hope you can get it fixed.
Bumping the topic
motolollipop said:
Oh man that's unexpected. I never think CM could cause this. I hope you can get it fixed.
Bumping the topic
Click to expand...
Click to collapse
Thanks man. But no help so far
Bit of an old topic, but wondering whether there's any update? I have a similar issue. I was running 12.1, and installed the nightly update from yesterday, not noticing it was for 13 (Android 6.0). I was then able to get back into recovery and flash a working 12.1 image. The issue now is the phone is stuck in a boot loop, going through "Optimizing app x of 133", gets to the end and then reboots. I can get into the boot menu and select recovery, but it reboots and goes back into the same boot loop. Likewise if I chose Factory from the boot menu.
Any luck on your side?
Tass99 said:
Bit of an old topic, but wondering whether there's any update? I have a similar issue. I was running 12.1, and installed the nightly update from yesterday, not noticing it was for 13 (Android 6.0). I was then able to get back into recovery and flash a working 12.1 image. The issue now is the phone is stuck in a boot loop, going through "Optimizing app x of 133", gets to the end and then reboots. I can get into the boot menu and select recovery, but it reboots and goes back into the same boot loop. Likewise if I chose Factory from the boot menu.
Any luck on your side?
Click to expand...
Click to collapse
No bro. I've bough a spare phone to survive on till I get a solution for this.
But nothing has worked so far.
CoolCrusader said:
No bro. I've bough a spare phone to survive on till I get a solution for this.
But nothing has worked so far.
Click to expand...
Click to collapse
That happened to me too, I think even the same image! It was a long time ago and I have now switched to a Oneplus One after using a Moto E which actually isn't that bad - I got it new super cheap. For me, Cyanogen restarted to update and after a LONG period of time stopped doing anything (I have upgraded before). I couldn't mount anything in CWM and I lost all data irrecoverably. The partition table got all messed up, and I had to flash a dual sim image as it was the only one that loaded - done through fastboot. I then flashed the original kitkat image and then massively messed up and updated, making my phone qhs_bulk.
Basically everyone who has had lollipop on their devices and have this are waiting for files to be leaked from Motorola so they can make their phones work. Not much is happening currently, you might as well get a new budget phone - some of the new ones are much better than the Moto G 1st gen! Or you could do what some people are doing which is ordering broken Moto Gs off eBay and replacing the board. Good luck!
---------- Post added at 01:49 AM ---------- Previous post was at 01:42 AM ----------
Tass99 said:
Bit of an old topic, but wondering whether there's any update? I have a similar issue. I was running 12.1, and installed the nightly update from yesterday, not noticing it was for 13 (Android 6.0). I was then able to get back into recovery and flash a working 12.1 image. The issue now is the phone is stuck in a boot loop, going through "Optimizing app x of 133", gets to the end and then reboots. I can get into the boot menu and select recovery, but it reboots and goes back into the same boot loop. Likewise if I chose Factory from the boot menu.
Any luck on your side?
Click to expand...
Click to collapse
You may want to go the fastboot method to flash a stock lollipop image and CWM recovery - if you don't have a backup, you may want to try just flashing something like TWRP to see if you can get some files off your device, then completely flash over it.
Related
Randomly today my brother's Moto G just turned off and refused to get past the bootscreen and upon turning it off it simply reboots to the bootscreen, at the time the firmware was 4.4.2 and i attempted to flash it back to stock 4.3 using this guide http://forum.xda-developers.com/showthread.php?t=2542219 , I got all the OKAYs, followed instructions completely and it still reboots to the bootloader after the 4.3 Stock load.
My question is, is there anything else I can do or is this phone done with?
I am currently in the process of reflashing with a 4.4.2 firmware, all for the xt1034 which is the phone model. Any help would be appreciated as none of the modes in the boot console [recovery,factory] etc do nothing but get stuck on the bootscreen.
And one last question, how long does the phone last on the bootscreen after a reflash? I waited 10mins but nothing changed.
EDIT: can someone change this thread to question, it seems i didnt click it properly >.>
2Ponies1Apple said:
Randomly today my brother's Moto G just turned off and refused to get past the bootscreen and upon turning it off it simply reboots to the bootscreen, at the time the firmware was 4.4.2 and i attempted to flash it back to stock 4.3 using this guide http://forum.xda-developers.com/showthread.php?t=2542219 , I got all the OKAYs, followed instructions completely and it still reboots to the bootloader after the 4.3 Stock load.
My question is, is there anything else I can do or is this phone done with?
I am currently in the process of reflashing with a 4.4.2 firmware, all for the xt1034 which is the phone model. Any help would be appreciated as none of the modes in the boot console [recovery,factory] etc do nothing but get stuck on the bootscreen.
And one last question, how long does the phone last on the bootscreen after a reflash? I waited 10mins but nothing changed.
EDIT: can someone change this thread to question, it seems i didnt click it properly >.>
Click to expand...
Click to collapse
Type: Fastboot -w
It will Delete user data but it will work normally
xxeldaddyjrxx said:
Type: Fastboot -w
It will Delete user data but it will work normally
Click to expand...
Click to collapse
Thanks, this worked but everything is ridiculously unstable at the moment, google services stopping all the time did i use a bad fw?
2Ponies1Apple said:
Thanks, this worked but everything is ridiculously unstable at the moment, google services stopping all the time did i use a bad fw?
Click to expand...
Click to collapse
do the Fastboot -w then re flash the android 4.3 and update to 4.4.2 and it should go back to normal
sorry for a late reply, been busy lately , im only 14 years old cx and got alot of school work and help my dad at work too.
Hi guys,
After searching for a few days and doing stuff myself (perhaps not everything for the best), I finally get it over with and ask for advice.
I've got a GT-N8010, since long been running an unofficial CM11 build (since one of these CM11 builds, the device was known as a GT-N8013).
Last week I started looking at the unofficial CM12.0 and CM12.1 builds, those looked promising.
After some info, I flashed to the CM12.1 build. A few minutes later, Android 5.1 in all it glory... everything running fine. Saturday evening I noticed I didn't get root.
Without thinking straight, the next morning I started flashing superuser but as you might imaging, that totally f'ed the system.
Now logically, one could just reflash CM12.1 and be done with it .. somehow I skipped all logic and started tinkering in recovery (TWRP).
After some doing, I managed to even F-up TWRP, it wouldn't boot anymore. The TeamWin logo was visible, screen flashed, logo and back.
No worries, there's still the download mode .. yeah about that ... already in panic mode .. doing more harm than good.
So .. Now I'm at this curious state.
I've managed to get it booting to a stock ROM. TWRP is also running.
The weird stuff I'm encountering now:
The device is semi recognized as a GT-N8000, if it was just that, I really don't care.
I said semi, when I want to flash another ROM (even specifically the CM12.1 for GT-N8000) it always states (in ADB Sideload in TWRP) that the package is not for this device.
There's a whole lot of devices listed, then it states "this device is ." , as in blanco device?
Anyone got an idea how to fix it so I can enjoy the Android 5.1 build again? (and seriously, remove the stock rom would be the first priority)
Thanks.
Hi guys, I have a problem with a one plus one that can't exit from bootloop.
I just tried to flash a stock firmware (11S) and the one plus restoretool but with no success. I can only acced recovery and fastboot. The device is also unlocked. Can it be a hardware problem? Thank u for your help.
BlackSkorpion said:
Hi guys, I have a problem with a one plus one that can't exit from bootloop.
I just tried to flash a stock firmware (11S) and the one plus restoretool but with no success. I can only acced recovery and fastboot. The device is also unlocked. Can it be a hardware problem? Thank u for your help.
Click to expand...
Click to collapse
You don't give much detail as to what happened or what you were doing prior to your bootlooping. I suffered from a bootloop that took me several months to finally resolve on the very device I'm responding to you with. I was able to resolve it by installing the latest Oxygen OS from the OPO forums. I followed the directions exactly, then after booting into Oxygen it turned out that my WiFi and Bluetooth were refusing to turn on. After several attempts and force close reboots I was able to get them to function. Then I reinstalled TWRP, then flashed CMOS12, then finally CM which I'm using now. BTW for more detail look for my post about it in this forum. Hope this helps.
Odysseus1962 said:
You don't give much detail as to what happened or what you were doing prior to your bootlooping. I suffered from a bootloop that took me several months to finally resolve on the very device I'm responding to you with. I was able to resolve it by installing the latest Oxygen OS from the OPO forums. I followed the directions exactly, then after booting into Oxygen it turned out that my WiFi and Bluetooth were refusing to turn on. After several attempts and force close reboots I was able to get them to function. Then I reinstalled TWRP, then flashed CMOS12, then finally CM which I'm using now. BTW for more detail look for my post about it in this forum. Hope this helps.
Click to expand...
Click to collapse
Hi, i dont know what happened before because the Phone is not mine, is of the gf of a friend. I can reach fastboot and recovery and I also changed the recovery to twrp and installing a new rom, but bootloop still is running. What can i do else?
BlackSkorpion said:
Hi guys, I have a problem with a one plus one that can't exit from bootloop.
I just tried to flash a stock firmware (11S) and the one plus restoretool but with no success. I can only acced recovery and fastboot. The device is also unlocked. Can it be a hardware problem? Thank u for your help.
Click to expand...
Click to collapse
Do you have a backup? try restoring just the system and the data of your backup.. i used to flash the boot too but as far as i know flashing boot doesn't solve the issue (still bootloop-ing). if you are still in bootloop and really have no idea, try consider a full reset of your phone (all except your custom recovery, ofc) and flash a new flashable.zip rom.. (data+media also wiped) you can always copy files to your phone while in recovery by mounting a usb drive, in case you don't have a zip on your phone. of course, this is not the solution, and is not recommended, but take this as your last choice if any other method didn't work
hope it helps!
Kevin1705 said:
Do you have a backup? try restoring just the system and the data of your backup.. i used to flash the boot too but as far as i know flashing boot doesn't solve the issue (still bootloop-ing). if you are still in bootloop and really have no idea, try consider a full reset of your phone (all except your custom recovery, ofc) and flash a new flashable.zip rom.. (data+media also wiped) you can always copy files to your phone while in recovery by mounting a usb drive, in case you don't have a zip on your phone. of course, this is not the solution, and is not recommended, but take this as your last choice if any other method didn't work
hope it helps!
Click to expand...
Click to collapse
I dont have a backup, so i also tried yet everything you said. I dont have to save datas, so i flashed everything new, but still dont work. I also tried to flash everything from oneplusrecoverytool that in any difficult situations helped me, but in this case it did not worked. Is there any radical solution to get this Phone working? (i can install twrp and reach fastboot, but after installing something, it's always in bootloop. ?
i have the same problem , don't know what to do , i even used the tool to return to stock
maybe an overheat problem? i don't know
Gentlemen, please try the method I suggested above in my response. Go to the OPO forums and follow the procedure to switch to Oxygen OS exactly as they lay out. As long as you're unlocked and can get to the bootloader and recovery you aren't hard-bricked and will be able to eventually fix your handsets. I know from personal experience, because as I mentioned this device was hopelessly stuck in a bootloop for months before I was able to get it running again. Do a search for my previous post for instruction and as I said follow the guide to installing Oxygen to the letter. More than likely you've got several corrupt partitions and this method will resolve it. Once you've got your handset successfully running again on Oxygen you can then begin to flash other ROMs with no issues. For some reason the Oxygen OS is more robust in that it will boot up when there are issues with these corrupted partitions when CM based ROMs won't. I believe the title of my previous post was "hopelessly stuck in bootloop (solved)". I hope this helps.
Odysseus1962 said:
Gentlemen, please try the method I suggested above in my response. Go to the OPO forums and follow the procedure to switch to Oxygen OS exactly as they lay out. As long as you're unlocked and can get to the bootloader and recovery you aren't hard-bricked and will be able to eventually fix your handsets. I know from personal experience, because as I mentioned this device was hopelessly stuck in a bootloop for months before I was able to get it running again. Do a search for my previous post for instruction and as I said follow the guide to installing Oxygen to the letter. More than likely you've got several corrupt partitions and this method will resolve it. Once you've got your handset successfully running again on Oxygen you can then begin to flash other ROMs with no issues. For some reason the Oxygen OS is more robust in that it will boot up when there are issues with these corrupted partitions when CM based ROMs won't. I believe the title of my previous post was "hopelessly stuck in bootloop (solved)". I hope this helps.
Click to expand...
Click to collapse
i tried your solution but nothing changed i also tried this procedure http://forum.xda-developers.com/one...lusrecovery-tool-v1-0-restore-t2991851/page23 , the process is success but at the reboot the phone is always in bootloop
still same problem here =/
Download the latest fastboot image from here: http://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
Then go here: http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471 follow step #8
Besides my comments in the title, the only thing my K1 can do right now is go into the bootloader and nothing else.
The Story:
I was running Blisspop 4.0.3 (Lollipop 5.1.1) then flashed to Blisspop 6.0 (MM 6.0). After that, it wouldn't boot into the OS. I did a complete wipe of everything and tried to flash Blisspop 6.0 again, same outcome. I heard I needed to get my hands on TWRP 3.0.0.0 to get MM roms up and running. My dumb ass flashed it and now, I don't have a recovery either now because it gets stuck on the first slpash screen. I went digging around the forums here and I felt like I read something about doing a bootloader update. If that's true well then I done messed up now. At this moment in time, I am only able to launch the bootloader but for the life of me, I can't get ADB to detect it connected to my computer to fix these issues. So as of right now, it's a $200 brick. If anyone can point me to some awesome tools to hack my way around this conundrum, I'd love you forever. Thanks in advance for listening to my problems.
Please could someone help ! I'm trying to unlock my XT1032. I have the correct Sim-Unlock (network unlock) code from my old telco, but... it won't work because the phone is rooted, bootloader unlocked (S-ON) running CM13.
I figured that returning it to a stock build would allow me to unlock the phone, then I could re-root and return to CM13 on my new network.
However..... there are about a dozen guides on returning a Moto G to stock and the first one I tried left the phone stuck on the 'Warning: Bootloader is unlocked' message. Since then, I've tried several other guides and have got nowhere fast. I've been on this for four hours now and the only thing I seem to be able achieve is to get TWRP or CWM recovery on there by flashing from fastboot. Every other image I try either gives 'preflash validation failed' messages, sticks on the Bootloader Unlocked screen or gets it stuck in a bootloop!
I just want to switch networks... Why is this so bloody difficult ?
What Firmware did your XT1032 originally come with? or which Carrier?
Kitkat I think, and it's Tesco (UK).
I subsequently did the OTA update to Lollipop and then.... WHOAAAAA.... hold on... it's booting !!!
I don't know how, or what I've done to get this far, but the only thing I can think of that's changed is that the battery is now at 100% charge. It appears as though it's successfully flashed the 5.1 untouched ROM from http://forum.xda-developers.com/devdb/project/?id=7981#downloads
But, I've tried flashing that loads of times this evening and it's failed everytime.
Having said that it's booting, it's sitting here on the Motorola logo - and it hasn't got that far in the last five hours.... I'll be back shortly !
Update: It worked ! It completed the boot, I put the new SIM in, it asked for the unlock code and this time it worked OK. Now I'm tackling putting CM13 back on it. I think I'll stick with TWRP rather than CWM recovery, as long as TWRP can handle the automatic updating for the CM nightlies.
I have no idea what went wrong there - maybe it was just that the battery had to be at 100% ?? Who knows... Thankfully I doubt I'll be tackling that again !
I don't know if things have changed, but I would be careful with OTA Updates in CM. People have hard-bricked (phone is effectively destroyed) applying updates in this way. I also suggest you avoid official Motorola updates, rather use the factory firmware images available here: (which already include the content of OTA Updates)
[INDEX] Moto G [Falcon][Peregrine] Factory Firmware Images​
Thanks for replying anyway mate. In the end, it's all good now. Unlocked and back on CM13 and on my new network !
Ahhh... not so good after all. The phone reboots every time you try to uninstall an app. I've tried flashing back to CM12.1, the latest stable release, and it does the same, so I've obviously screwed something up along the way.
Could someone help me flatten this thing completely and get it working normally please?
I've tried reflashing loads of times, even tried Cyanogen Recovery instead of TWRP but nothing I do gets rid of this reboot problem.
Can anyone assist please?
OK, so I've followed the procedure detailed here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 and flashed the Untouched 5.0.2. EU Stock ROM successfully, but it still reboots when you try to uninstall any app.
Whatever it is that's causing this is not getting overwritten by the flashing procedures I'm using is it ?
HELP !!!!!
@aneng64 - You have not done what I told you to do. Read my post again.
Yes I did... and I still had the same problem. It was only once I stopped trying to flash zips from TWRP and used mfastboot to flash the whole set individually (non-hlos, motoboot etc) that I got it to behave. The issue, incidentally, seemed to be the same one mentioned elsewhere here that also causes settings to crash when you try to go into settings, security.
Once it was stable with a stock ROM, I was able to flash CM13 again and it's now sorted. Thanks for your help anyway.