[DISCLAIMER] I use this for my T-mobile LG G Stylo this also works for the MetroPCS variant, I don't know if it'll work for any other variant. therefore I'm not responsible for what happens if you decide to use this, as always please make a backup before proceeding. You also must be rooted in order for this to work.
This is what I use to increase my volume I forgot who was the originator of this file but
HUGE SHOUTOUT TO HIMHIM!!
These are the steps I was told to take :
1. download ---->THIS<----
2. open your file explorer [I use root file explorer] and look for the file you just downloaded "tweak2.AUX.mixer_paths.xml" then copy and paste it into SYSTEM-->ETC
EVERYTHING WILL BE DONE IN THE ETC FOLDER
3. Find the "mixer_paths.xml" file copy the name then rename it "mixer_paths.xml.old"
4. Find the "tweak2.AUX.mixer_paths.xml" file and rename it "mixer_paths.xml" or just paste the text you just copied.
5. After you renamed the file, find it and Change permissions as seen in this screenshot, after that hit "ok"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Reboot into recovery and wipe cache and delvik cache.
7. Hope I helped.
You can also combine this with:
Dolby Atmos
download zip and flash it via TWRP]
nice boost
thanks bro,
this small tweak made a big difference
seetru said:
thanks bro,
this small tweak made a big difference
Click to expand...
Click to collapse
No problem bro.
This works great with Dolby ATMOS on my LG G Stylo (MetroPCS). Thanks for this.
Related
I'm sharing you the latest version of gtalk for our beloved HTC Explorer
Note: this app will work on any phone having gingerbread rom installed in it (custom/stock etc) not tested on ICS or JB.
Soo lets get started
Here are some screen shoots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation Instruction:
(Manual Method)
1. Download the gtalk.zip and extract it
http://www.4shared.com/zip/-_lN0Fph/gtalk.html
Note: after extracting the zip there will 2 folders goto system folder and you will find 2 more folders 1. APP & 2. Lib. Firstly open up app folder and copy talk.apk then follow step no.2
2. Now goto system/app and make the backup of "talk.apk" and paste the extracted one from the zip
3. Now change the ownership & properties as shown below
Now goto the lib folder extracted from zip and copy the content it contains and head straightly to system/lib folder
4. Now copy and paste the file from zip's folder to system/lib and change its ownership and properties as well shown below
If you follow the instrctions as discribed you will surely get this app working!
You can also flash this zip file from recovery but it doesnt worked for me thats why i explained the manual method for you!
Note: if the app dissapears just reboot and then it should be appeared!
Enjoy!
Press thanks button if i helped you folks! :thumbup:
Hey Mates, Now here i'm going to tell u how to Install/Flash apps with custom recovery.........
Let we start,
There are 2 ways in which we can Install/Flash apps.
1. User Apps :- Those apps which can be removable any time.
2. System Apps:- Those apps which cannot be removed without the root permission.
Note:- It is totally yours choice to choose which package to install your apps in your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now, Installation instructions.
1. Download the ZIP according to your need.
2. Open the zip file with any of them 7zip, winzip, winrar or anything else.
3. Look inside the zip! DO NOT DELETE ANYTHING! All you need to do is ADD STUFF!
4.i. If you are going to install app as user then go to data/app folder,and here drag n drop ur app.
..ii. If you are going to install app as System then go to system/app folder,and here drag n drop ur app.
REMEMBER: Do Not DELETE anything! ADD APK files ONLY in the "app" folder.
5. Click OK button, Wait for the APK files you copy to get added to the archive.
6. Close the archive.
7. Rename and copy the archive to your Memory Card.
8. Boot into Custom Recovery and flash the copied zip file you just created.
9. Enjoy!!:good:
You can do many more with them than flashing apps, but for general purpose usage, this should be enough.
THis is COOLL!!! Bro
So, I have a Samsung Galaxy S2 GT-i9100 running a CM11 Android 4.4.4 Nightly, and I got errors while attempting to install the Gapps package.
And, I didn't even want Gapps! I only wanted Play Store, like many of you reading this. So, this was what I did.
1) Download the zip file below. All of the apk files were taken from the latest PA-Gapps package for 4.4.4 .
2)Extract the files to your device, put them on some folder.
3)Use a root explorer (like CM File Manager, which comes with CyanogenMod), and copy the 4 apk files to /system/priv-app
4)Now set the permissions. (You can do it via the terminal, set the permissions to 644, but this is easier). All files must be set like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5)Finally, reboot. Open Play Store. Ta-da
Download:
https://www.mediafire.com/?1qnase152jvbwc9
DISCLAIMER: I shall not be held responsible for any damage dealt to any device.
Old news bro .... We can just download a superlite gapps package and flash it we're done
But nice that you have figured it out yourself
DanielBink said:
Old news bro .... We can just download a superlite gapps package and flash it we're done
But nice that you have figured it out yourself
Click to expand...
Click to collapse
Doesn't work for me. For some reason, I haven't been able to flash ANY Gapps.
That's weird
If you installed the chinese firmware on your meizu 16th, you probably noticed a low volume and distorted audio in general when using bluetooth.
Even when enabling the standard equalizer the problem persist. Audio remains low, bass and trebles are not reproduced well.
So, here's how I managed to fix it and bring it to the best quality:
Download an mp3, connect your bluetooth headset(I used my airpods) and check the quality
Root your meizu if you haven't done yet, following this tutorial: Root Guide Link.
Install from playstore Busybox Busybox Playstore Link, open the app, click install, don't reboot yet.
Download this zip: Bluetooth Libs Download, extract and place them in a folder in your internal storage
Using a Root explorer(I use XPlore: XPlore Playstore Link) copy and replace those libs in system/lib and system/lib64 folder.
Open the file /vendor/build.prop and edit this parameter: persist.vendor.bt.a2dp_offload_cap and add -aac at the end. In this way you will change it to: persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxtws-aptxhd-aac. Save the changes.
Go to the path /vendor/etc and rename the file audio_effects.conf to audio_effects.conf.bak
Reboot now. This is very important.
Install ViperFX from this link ViperFX_2.5.0.5 and execute it. It will ask to install drivers, click yes and wait, it will freeze for a while, just wait. when it's done, press ok.
Reboot again.
Now you can open ViperFX, enable it and test the sound quality(volume should be louder and better quality)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello
I exported the core files of my " SPRING " model industrial tablet with ClassyKitchen_Free_Beta_1.0.4 program and made the changes I wanted and repackaged it but it doesn't work, guess NTFS packaging
Is it possible to pack it the same as the original package file I have or what can I do to make it work?
Thank you in advance for your answers.
orginal zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
zip ı made
reşat birlik said:
Hello
I exported the core files of my " SPRING " model industrial tablet with ClassyKitchen_Free_Beta_1.0.4 program and made the changes I wanted and repackaged it but it doesn't work, guess NTFS packaging
Is it possible to pack it the same as the original package file I have or what can I do to make it work?
Thank you in advance for your answers.
orginal zip
View attachment 5726679
zip ı made
View attachment 5726681
Click to expand...
Click to collapse
Is your bootloader unlocked? Is your device rooted? If not, you can't flash a modified system file.
How are trying to flash/install this?
Hello
actually i am not flashing i am just updating the system with a helper apk
My update process is successful with the file I sent in the first picture, but my device cannot read it when any changes are made to the file.
helper apk image like this
as @Droidriven said, if your device is not bootloader unlocked or rooted, you cannot install the update. the system checks for an official update. your modified system lacks those official markers, thus refuses to install it.