Hey! I've been using cm12.1 nightlies basically since the beginning, updating to new versions via cyandelta. It has been working great until the other day, where it suddenly just stuck at the 1+ screen. I had it setup to flash the nightly, supersu and xposed.
Restored backup and tried again, to no avail.
Then I decided to take the opportunity to try the sultan version. Did a clean install, along with tk-gapps, supersu and xposed. Works fine.
Then I get a notification that there's a new sultan zip, dirty flash it along with the aforementioned zips, and it is stuck in 1+ screen again.
Any clues as to what could be the cause? The only new thing I've done that could fit with when the problem began is emoji switcher, which can change the emoji fonts on system. Could that be the reason the flash fails?
Thanks in advance for your help!
Sent from my A0001 using Tapatalk
Related
Hello everyone,
I flashed CM10.1 and the gapps (gapps-jb-20121212-signed.zip).
When I boot the phone it lets me enter my pin code, but after that I get those two messages:
"Unfortunately the process com.google.process.gapps ended."
"Unfortunately the process setup wizard ended."
And I only may click on "ok" ever and ever and ever again.
The only way to get unstuck from this is to remove the battery and restore the phone.
I flashed many times with different builds and different gapps packages too, I ever get the same issue.
I also did it with and without wiping everything.
What am I doing wrong?
Thank you for your time.
Halavus
Did you wipe data/cache completely?
Zulda said:
Did you wipe data/cache completely?
Click to expand...
Click to collapse
Yes I tried with and without wiping. The issue is the same in both cases.
Sent from my Nexus S using xda app-developers app
Wipe again, flash CM again, reboot, recovery, flash Gapps, reboot. Must works
I tried again many times and I had the same bugs.
But since this afternoon I used TWRP instead of CWM and now it just works perfect.
I'm sure the issue came from CWM.
Hey guys, I am new to the forum. I am glad I found this thread, I keep running into this same problem.
I have been flashing CM 10.1.2 with what I think is the wrong Gapps flash, gapps-jb-20121011-signed.zip. That is the wrong Gapps flash, right?
If that is the wrong .zip, how should I restore back to my Titanium back up from recovery?
this is the correct gapps for 4.2.2 20130301
Hello all
I am facing a strange issue of phone when I took it I out of pocket it started I use multirom was on secondary rom slimkat latest when this happened. When I took it from the pocket it was on my internal rom PA latest beta2 and lost my baseband to unknown and wifi also not working so I went to twrp to flash the radio zip went fine flashing it but when rebooted there was no baseband so tried again for few times but no luck.
So I decided to start clean by removing all secondary roms and did a factory reset of the internal rom and flashed the PA 4.6 beta2 and gapps to start clean but after that the issue started happening it boots till the welcome screen to select language from there it rebooting again into a endless times tried for times to flash the rom again but still it rebooting from that screen . My phone is unusable now.
Can someone guide me how to start clean from here and to boot a rom properly.
Really hoping someone here can help me out on this. Thanks in advance.
Really need some help to get my device back up and running. Right now my phone is on endless reboot loop from the welcome screen of the rom with multirom twrp recovery.
Fingers crossed and waiting. :/
Why don't you start from scratch aka cm11s
-Tunasty
AhmedFaiz said:
Hello all
I am facing a strange issue of phone when I took it I out of pocket it started I use multirom was on secondary rom slimkat latest when this happened. When I took it from the pocket it was on my internal rom PA latest beta2 and lost my baseband to unknown and wifi also not working so I went to twrp to flash the radio zip went fine flashing it but when rebooted there was no baseband so tried again for few times but no luck.
So I decided to start clean by removing all secondary roms and did a factory reset of the internal rom and flashed the PA 4.6 beta2 and gapps to start clean but after that the issue started happening it boots till the welcome screen to select language from there it rebooting again into a endless times tried for times to flash the rom again but still it rebooting from that screen . My phone is unusable now.
Can someone guide me how to start clean from here and to boot a rom properly.
Really hoping someone here can help me out on this. Thanks in advance.
Really need some help to get my device back up and running. Right now my phone is on endless reboot loop from the welcome screen of the rom with multirom twrp recovery.
Fingers crossed and waiting. :/
Click to expand...
Click to collapse
If you read the OP for the PA 4.6 it says not to use the latest gapps as it doesn't work so try out the one that the OP recommends
Sent from my A0001 using Tapatalk
Tunasty said:
Why don't you start from scratch aka cm11s
-Tunasty
Click to expand...
Click to collapse
I think I need to do that. I am at work now need to download the cm11s from the official link. Can you link me to a good guide to start from scratch. Will try clean later today. So I need to go to fastboot manually by pressing vol up button and power button to enter?
Is it a known issue or are there others with the same issue. Please link me there too.
Thanks for the advice.
jojohnson250 said:
If you read the OP for the PA 4.6 it says not to use the latest gapps as it doesn't work so try out the one that the OP recommends
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Used the old micro gapps I don't think that is the issue here. All this started after losing my radio and wifi not working after that strange reboot from my pocket. When I connect to android file transfer it shows no files in the phone and can't move anything to the device also.
Started from scratch and back on stock cm11s. Gone stay pure stock for a while before I start rooting again.
Flashed official cm11s rom through fastboot mode.?
Hi guys, basically my problem is, every time I reboot my op6 it takes me directly to TWRP recovery mode, if I want to get into my phone I have to fastboot boot the boot.img and I get in, this is kind of an inconvenience and I'd like to know, does anyone know how to fix this issue? I'm running twrp enchilada 3.2.3.1, latest magisk beta version and oos 9.0.2.
Try blue_sparks twrp.. should work.. you'll find it in his thread in the custom ROM section..
Try reinstalling a non-beta magisk in TWRP and see if that fixes it.
For some reason swift installer was crashing my calendar app, and after I removed the overlay on that app everything started working properly... I think that was the problem but it's kinda weird... Thank you guys anyways, everything is fine now.
Hi, I have OP6 since day one. Unlocked, with blu_spark TWRP, rooted with Magisk. Didn't have any problems. Yesterday I decided to try some custom rom and I hit a wall. Can't make Wi-Fi working - tried NitrogenOS and ViperOS. As I don't have a lot of experience with A/B partitions I tried few step by step instructions I was able to find here. Tried with latest stable, latest beta, different versions of TWRP. Problem is not related to Magisk or Gapps - wifi is not working and can't do anything about it.
At my first try I forgot to reflash twrp and I lost access to internal memory (pin in twrp), so I flashed full stock (https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665) and started from this - nothing.
Tried latest beta flashed through TWRP - same effect.
I tried to decrypt everything with dm-verity fix - everything is fine, except wifi.
I've done 10-15 attemps to flash everything since yesterday.
Can somebody write a step by step instruction how to flash something correctly, that's fight for honor at this point:fingers-crossed:? I have no idea what I am doing wrong or what I am missing I flashed plenty of phones and never had problems like this.
On stock(stable and beta) wi-fi is working like it should, olny custom roms are making a problem.
hinix said:
Hi, I have OP6 since day one. Unlocked, with blu_spark TWRP, rooted with Magisk. Didn't have any problems. Yesterday I decided to try some custom rom and I hit a wall. Can't make Wi-Fi working - tried NitrogenOS and ViperOS. As I don't have a lot of experience with A/B partitions I tried few step by step instructions I was able to find here. Tried with latest stable, latest beta, different versions of TWRP. Problem is not related to Magisk or Gapps - wifi is not working and can't do anything about it.
At my first try I forgot to reflash twrp and I lost access to internal memory (pin in twrp), so I flashed full stock (https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665) and started from this - nothing.
Tried latest beta flashed through TWRP - same effect.
I tried to decrypt everything with dm-verity fix - everything is fine, except wifi.
I've done 10-15 attemps to flash everything since yesterday.
Can somebody write a step by step instruction how to flash something correctly, that's fight for honor at this point:fingers-crossed:? I have no idea what I am doing wrong or what I am missing I flashed plenty of phones and never had problems like this.
On stock(stable and beta) wi-fi is working like it should, olny custom roms are making a problem.
Click to expand...
Click to collapse
Use the unbrick tool. It will force write all your partitions.
tabletalker7 said:
Use the unbrick tool. It will force write all your partitions.
Click to expand...
Click to collapse
Last thing I did was flash-all-partitions.bat from image mentioned in my post. I gave up idea of custom rom for now. But I'll try unbrick tool on my next attempt.
Sent from my ONEPLUS A6003 using Tapatalk
i have the SAME problem, did you manage to fix this?
Hi guys,
long time ago i've already been a Member to XDA Community. HTC Wildfire was a brand new phone at that time. In the mean time i've switched to a Oneplus 2 running Lineage OS 17.1 and two years ago i got a Oneplus 6 running stock ROM till yesterday.
Yesterday i got Lineage OS with Wifi up and running fine with the official guide and official lineage recovery but forgot to flash OpenGapps in the first try. Tried flashing it again but got a Qualcomm Crashdump Mode Error after that.
So i went on to reflash the whole phone with clearing storage, system and so on. Flashed again now with OpenGapps and Magisk with reboot to recovery method described in official installation guide, Lineage was booting fine and tried to search for Wifi-Connection but i wasn't able to see any Wifi at all. I finished the setup and tried again in settings but System UI crashes if i try that. Rebooted, cleared Cache and tried again but nothing.
So i went back to full stock 10.3.0 with MSMDownloadTool but it only flashes partition a? Is that correct?
After a lot of trying different things got back to 10.3.5 on a and b partition with mauronofrios stock fastboot roms from https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665 (Thank you very much for that! :good: ). I can boot both slots if i switch them in booted twrp without any problem.
On stock everything works fine my wifi detects all available networks and i can connect to them without problems.
What did i do wrong?
Any help would be appreciated.
Thank you!
Schwaus
EDIT:
So i did a little bit more testing:
Installed lineage-17.1-20200804-nightly-enchilada-signed.zip with corresponding recovery without anything like Gapps or Magisk both like described in official instruction and with TWRP from mauronofrio. I also tried to flash latest official OTA from Oneplus via TWRP before flashing Lineageos. In neither of the tested ways Wifi is working and i cant see any Wifi-MAC-adress under settings. Also tried to switch back to stock before flashing with flash-all-partitions.bat from mauronofrios stock to get the persist partitions replaced too.
Every version of Stock like the MSMDownloadtool 10.3.0 or Stock 10.3.5 from mauronofrio Wifi works perfectly without problems. I also can update via OTA without issues. I just dont know what is happening with my Wifi firmware when flashing LineageOS.
EDIT 2:
Got the problem fixed:
Don't know if i done it right but maybe it helps someone.
In my case it was a combination of problems:
- First the latest Oneplus 6 Lineage releases (20200804 and the withdrawn 20200811) seem to have a bug when installed fresh on a device to cause a bootloop so i used the one from 30/06/2020 and updated with the app afterwards.
- Secondly the copy-partitions.zip script hasn't copied all of the partitions necessary. In mauronofrio's fastboot image there is a image named fw_4u1ea.img. This one got not copied by the script, so i booted twrp-3.4.0-1-enchilada-Q-mauronofrio.img and flashed all of the images (fastboot, persist and critical) to slot b again manually like described in his thread. The flash-all-partitions.bat has not worked either.
Now LineageOS works like a charm and i can see and connect to every wifi.
Hey mate. I had the same issue and I gave up at this point. Tomorrow I'll try your "EDIT 2:" and gonna leave a feedback
Hey Schwaus, thanks for this post. *EDIT 2* worked for me