Hi I have an issue with permament restarting and no service in my N5.
I have bought it like this for very nice price with hope to restore it.
It had CM11 with restarting and no service issues when I recieved it.
I decided to try hard reset and after many tries with Nexus Root Toolkit and LG Flashtool I have ended with 4.4.4. with quite "stable" performance (it is working fine for couple minutes periods between restarts).
In bootloader there is no issue with restarting so it looks like system problem to me but I am not sure
Please help me I have no idea what to do now.
Maybe this solution could help? what do you think?
http://forum.xda-developers.com/google-nexus-5/help/nexus-5-stuck-boot-loop-lollipop-t3098632
Flash stock via adb or toolkit.
I flashed stock roms few times both ways but with no result
Wysłane z mojego Galaxy Nexus przy użyciu Tapatalka
Related
Hi
I have Z3 D6603 was working fine
I downloaded 5.1.1 MEA and create FTF and flash with flash tool
now wifi and Bluetooth not open at all
i tried downgrade to 4.4.4 and 5.0.1 but still same
any solution for that
best regards
Same here. Locked bootloader, stock FTF that was updated to 5.1.1 via OTA. WiFi is wonky since then. I tried flashing different FTF's, including 5.1.1, 5.0.1 and 4.4.4, but WiFi is still quite wonky.
I also tried recovering using the PC Companion, thought it might have some extra magic compared to Flashtool - but no, WiFi is still extremely wonky: it is restarting itself every few seconds.
tracid said:
I also tried recovering using the PC Companion, thought it might have some extra magic compared to Flashtool - but no, WiFi is still extremely wonky: it is restarting itself every few seconds.
Click to expand...
Click to collapse
i have the same issue, have you sorted that or still not yet?
still have same problem
mak_us1977 said:
still have same problem
Click to expand...
Click to collapse
I downgraded to kitkat 4.4.4 and wifi still not working, same as bluetooth,
meanwhile I got reply from sony support, and it is a hardware not a software issue, so the only solution is to send to the sony service and they need to replace motherboard I belive
Hi, I've encrypted my Moto G3 and it's sometimes a bit slowert than before. It takes about 2 minutes to boot up. Can I normally perform a Factory Reset and then log into my Google account? Or is that impossible?
After encrypting there's no way to decrypt it.
My Moto is a XT1542 1GB/8GB version.
Wysłane z mojego MotoG3 przy użyciu Tapatalka
OK let's start from the beginning, and I wanted to update to MM manually cause the OTA update didn't get come to me, I so installed TWRP and rooted my phone installed the marionette ROM, then tried to activate the dual SIM function tried every thing he told me flashed the recommended. Zip all want I got was just the appearance of the SIM 2,option in setting with out the ability to to enable it and it said SIM 2 empty, and the SIM card was already installed, confirmed that the 2nd SIM working by switching places of the 2 slots it worked then after many trials I had the same result, finally got I decided to return to the stock 5.0.2 and wait for the official OTA, installed the Mobile number upgrade Q and connected my phone it took a long time to finish the process and when it finished, the problem was still there only SIM 1 is recognised and the other says it's empty (it's not) what can I do now
flash panasonic eluga switch firmware (on my google drive). It will stuck and abort in 45% of instalation, but its OK.
then reboot (wait till it boots, it take about 10-15 minutes).
Then should both sim work.
Then use Mobile upgrade 5.0.0 and above to go back to stock 5.0.2.
DallasCZ said:
flash panasonic eluga switch firmware (on my google drive). It will stuck and abort in 45% of instalation, but its OK.
then reboot (wait till it boots, it take about 10-15 minutes).
Then should both sim work.
Then use Mobile upgrade 5.0.0 and above to go back to stock 5.0.2.
Click to expand...
Click to collapse
Thx i will give it a tray and give you a feedback but can you provide me with the link ?
Thx i found the link in your details :victory:
edit: flash it through TWRP ? OR WHICH FLASHTOOL?
panasonoc eluga switch firmware has its own flash tool. just run the exe file, turn off your phone and after you hit start, then connect the phone to the computer.
Odesláno z mého 6045Y pomocí Tapatalk
DallasCZ said:
panasonoc eluga switch firmware has its own flash tool. just run the exe file, turn off your phone and after you hit start, then connect the phone to the computer.
Odesláno z mého 6045Y pomoc�* Tapatalk
Click to expand...
Click to collapse
I downloaded eluga 6045dcz only found md5 file and another compressed file no exe file
no, its not the original firmware.. search with google on the net "panasonic eluga switch firmware"
Odesláno z mého 6045Y pomocí Tapatalk
DallasCZ said:
no, its not the original firmware.. search with google on the net "panasonic eluga switch firmware"
Odesláno z mého 6045Y pomocí Tapatalk
Click to expand...
Click to collapse
thx bro it worked like charm :good::good: thank you for your support :fingers-crossed:
I am. Having the same problem with my 6045k... Pls hlp me
DallasCZ said:
flash panasonic eluga switch firmware (on my google drive). It will stuck and abort in 45% of instalation, but its OK.
then reboot (wait till it boots, it take about 10-15 minutes).
Then should both sim work.
Then use Mobile upgrade 5.0.0 and above to go back to stock 5.0.2.
Click to expand...
Click to collapse
Thanks man! i had the same problem and its resolved :good:
I got no error at 45%
It went 100% successfully without any error..
Now eluga firmware is running like charm.LOL
WAT TO DO NEXT TO GO BACK TO Alcatel... Help
Guys,
my phone is still with November security can someone provide me solution?
BR
Check manually system update. Couple days ago I received February patch. In Europe you have updates after India which is usually first.
Wysłane z mojego SM-A750FN przy użyciu Tapatalka
Try to install Smart Switch app to PC and then connect with mobile by cable.. After first start of Smart Swtich it should shows that there is new update for your device and download it.. My case was the same. OTA no, but after I connect the Smart Switch, then automatically shows OTA in the phone
Hi, after updating and deleting the account of my device, I have a frp lock, I tried everything and nothing works, I have a security patch from August 1, 2020 my device is Samsung A8 2018, the phone I get the problem is that you can not enable debugging or installation from unknown source, has anyone met it? Sorry my bad ENG.
Flash stock rom
Wysłane z mojego Lenovo TB-8703X przy użyciu Tapatalka
Please help
Easy Samsung frp tool +Samsung Smart Switch (via otg cable copy Google account) not working.