[Completed] Galaxy note II dead? - XDA Assist

hi, my friend did a factory reset on his note 2 n7100 and got stuck on a boot loop. so i tried to flash the device using odin with the latest firmware but failed. it says ' complete(write) operation failed'. i searched everywhere but couldn't find a solution to it so i thought id just install a custom rom so i tried going into recovery mode but the 'install from sd card' option is not there. and again i thought its something wrong with the default recovery mode so i tried installing cwm from odin and again the ' complete(write) operation failed' shows up....
is there no hope for me to install a new firmware and make the device work? help??

Hi,
It would be best to seek help from the experts who own your device. You can register on the site and ask for help in this dedicated help thread in the Note 2 section,
http://forum.xda-developers.com/showthread.php?t=2055736
Good luck!

Related

Galaxy 7.7 P6800 help needed URGENT!!

Hey,
I was trying to format/wipe file system from CWM and the device crashed, so i opened ODIN and i inserted a firmware and i got FAIL on <ID:0/007> factoryfs.img
Please can anyone help with this ? I tried going in the recovery mode but i got an error saying open Kies and do recovery but Kies doesn't want to connect.

[Completed] PLEASE Help Accidently Bricked Verizon Samsung galaxy 5

I was following this root meathod by jrkuse http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370
i got all the way down to step 4 successfully but didnt understand what the step meant and skipped it (stupidest decision)
on step 6 i rebooted to recovery but did not have a ROM to install because i forgot to put one on the external and thus had to restart the phone
on restart it was stuck on the samsung boot and so i tired to flash it back to the VZW_BOK3_KERNEL_ONLY.tar.md5.
it didnt work and now im stuck on when i enter recovery booting and use the boot loader it says theres an error trying to flash over the AP using odin
it fails saying fused 2 > binary 1
I really just need to restore the phone back to its stock factory settings but i cant locate the
BL AP CP CSC and pit files for it anywhere!
Please Help!
XDA Visitor said:
I was following this root meathod by jrkuse http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370
i got all the way down to step 4 successfully but didnt understand what the step meant and skipped it (stupidest decision)
on step 6 i rebooted to recovery but did not have a ROM to install because i forgot to put one on the external and thus had to restart the phone
on restart it was stuck on the samsung boot and so i tired to flash it back to the VZW_BOK3_KERNEL_ONLY.tar.md5.
it didnt work and now im stuck on when i enter recovery booting and use the boot loader it says theres an error trying to flash over the AP using odin
it fails saying fused 2 > binary 1
I really just need to restore the phone back to its stock factory settings but i cant locate the
BL AP CP CSC and pit files for it anywhere!
Please Help!
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please create an XDA account so you can get the expert advice you need. Then you can visit your device forums here:
Verizon Samsung Galaxy S 5
You'll need to post your question here:
Verizon Galaxy S 5 Q&A, Help & Troubleshooting
Good luck and welcome to XDA!

J3 SM-J327P brick,odin fail HELP

Hello friends, I'm new here: D
Yesterday I wanted to place my J327P phone. I did everything normal as usual to root with TWRP but my phone went to boot, I went to odin download 2 frimware and it gave me failure (auth) after the sdl1 file I do not know what I tried with room from the twrp but I still have no luck, now does not pass the boost logo help me with what you can please.
booyah13233 said:
Hello friends, I'm new here: D
Yesterday I wanted to place my J327P phone. I did everything normal as usual to root with TWRP but my phone went to boot, I went to odin download 2 frimware and it gave me failure (auth) after the sdl1 file I do not know what I tried with room from the twrp but I still have no luck, now does not pass the boost logo help me with what you can please.
Click to expand...
Click to collapse
Same problem, did you find a solution ?
booyah13233 said:
Hello friends, I'm new here: D
Yesterday I wanted to place my J327P phone. I did everything normal as usual to root with TWRP but my phone went to boot, I went to odin download 2 frimware and it gave me failure (auth) after the sdl1 file I do not know what I tried with room from the twrp but I still have no luck, now does not pass the boost logo help me with what you can please.
Click to expand...
Click to collapse
Theres a mismatch between the bootloader and the os. You must use files that match the bootloader version when flashing.

phone boots in download mode instead of recovery

after flashing my gt 19300 with firmware of a gt 19300i (accidentally), i cannot flash the correct firmware and odin keeps giving me errors like repartition failed, operation write failed. please help.
Hint: In this thread's title replace "phone" by "gt19300" thus owners of such device get addressed.

stuck in bootloop no usb debugging! help!

i have galaxy gt-n8000 with android 4.4.2, recently my tablet stuck at bootloop and i almost tried everything but it seems nothing works! i can't go into recovery mode!! i can only go into odin mode/download mode, i tried flashing with twrp file using odin3 but i got complete(write) operation failed, i also tried recovery cwm touch file it not working, also tried flashing using stock firmware file but no luck, i got the same error complete(write) operation failed, i guess it because usb debugging is disabled on my tablet, is there is anything i can do?
thank you.
nevermindguy said:
i have galaxy gt-n8000 with android 4.4.2, recently my tablet stuck at bootloop and i almost tried everything but it seems nothing works! i can't go into recovery mode!! i can only go into odin mode/download mode, i tried flashing with twrp file using odin3 but i got complete(write) operation failed, i also tried recovery cwm touch file it not working, also tried flashing using stock firmware file but no luck, i got the same error complete(write) operation failed, i guess it because usb debugging is disabled on my tablet, is there is anything i can do?
thank you.
Click to expand...
Click to collapse
I'm sorry but this could be because of a defective eMMC, the symptoms are typical.
So you would have to change your internal memory.
stuck in bootloop no usb debugging
i have galaxy gt-n8000 with android 4.4.2, recently my tablet stuck at bootloop and i almost tried everything but it seems nothing works! i can't go into recovery mode!! i can only go into odin mode/download mode, i tried flashing with twrp file...
forum.xda-developers.com

Categories

Resources