Related
i did all necessary stuff according to this tutorial: (windows 7, 64 bit)
http://forum.xda-developers.com/showthread.php?t=1583427
just after typing: fastboot oem get_identifier_token
cmd says: <waiting for device>
and now it just freezes at this point, i don't get any further
anybody got some advice?
garldehildehar said:
i did all necessary stuff according to this tutorial: (windows 7, 64 bit)
http://forum.xda-developers.com/showthread.php?t=1583427
just after typing: fastboot oem get_identifier_token
cmd says: <waiting for device>
and now it just freezes at this point, i don't get any further
anybody got some advice?
Click to expand...
Click to collapse
Sure. This happened to me at first. Try connecting your phone to a different USB port? Did you get a taskbar notification that a device had been connected? (Did you here the little dings? ha)
When cmd says waiting for device, it either means that your phone isn't in fastboot (which I assume it is, since you were following the directions), or that the device isn't connected.
Also, did you install the software package HTC sync? It's a fairly large download, but it might be a necessary one to get the required drivers to connect the phone.
Let me know if this helps.
Make sure you've installed the usb drivers required by selecting the check box for USB in the Extras.
Yep I got this error too and just had to install HTC sync from the HTC website to fix it. Easy peasy
Just use this guy's toolkit. Worked on my U.S one S.
http://forum.xda-developers.com/showthread.php?t=1604677
Sent from my HTC VLE_U using xda premium
well i downloaded this htc-sync stuff you said and everything just works fine
thanks a lot guys!!
My htc one x is bricked (
Someone can help me...i am newbie and i trie many issue and problem persist...
I have 2 major problem....i can't mount my sdcard and when i tried ruu.. error 155 appears....
Sorry for my bad english
I pay 50$ for person can resolve my problem.....
There is my infos:
EVITA PVT SHIP S-ON RL
HBOOT-1.11.00000
RADIO-0.18AS.32.09.28L
OPENDSP-V28.1.0.32.0504
EMMC-BOOT
THANKS.
still need info what did you do to brick it ? im guessing you flash the wrong recovery
Did you relock your bootloader before RUU? And did you use the RUU that corresponds to your hboot?
i guess u did not flash a right recovery and did not flash back into htc's offical recovery before ruu
just try
boot to fastboot
flash the original recovery ( link : https://www.box.com/s/48a3962ztzy4gzapp28r )
lock bootloader using "fastboot oem relock bootloader"
ruu again
I don't think someone who doesnt know how they bricked their phone willl be able to do adb commands lol but like others said relock bootloader than ruu
Sounds like you factory reset in fastboot. For some reason it unnoints the sd card. I had this happen to me. To fix all I did was hook my phone up to the computer and when I went to the drive it was at it said it needed formated. Format it and you should be able to go back into recovery. Hope this helps.
Sent from my HTC One XL using xda premium
Please keep all question/help threads in the Q&A section only. Always search the forum before creating new threads.
Thread Moved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
Too little information.
What did you do to get to this state? Did you flash a ROM or recovery? Which one?
Did you relock the bootloader before running the RUU?
Hard Brick! htc one x - mac users
Hi folks ... seemed to have bricked my rooted htc one x after making the mistake of my life and flashing bindroid! phone is unlocked and rooted ... phone keeps on rebooting endlessly when connected to any charger (mac/wall). I believe the only way out is to use fastboot, anything else such as factory reset, going into cwm simply fails! now before all of u give me solutions using windows fastboot ... PLEASE give me specific fastboot instructions (step by step) on how to use fastboot on mac os x 10.8.2 cause I don't have windows ... detailed steps means exactly what to type when I launch terminal ... thank you all! have a good one.
galaxy_note_user said:
Hi folks ... seemed to have bricked my rooted htc one x after making the mistake of my life and flashing bindroid! phone is unlocked and rooted ... phone keeps on rebooting endlessly when connected to any charger (mac/wall). I believe the only way out is to use fastboot, anything else such as factory reset, going into cwm simply fails! now before all of u give me solutions using windows fastboot ... PLEASE give me specific fastboot instructions (step by step) on how to use fastboot on mac os x 10.8.2 cause I don't have windows ... detailed steps means exactly what to type when I launch terminal ... thank you all! have a good one.
Click to expand...
Click to collapse
Study this thread and come back:
http://forum.xda-developers.com/showthread.php?t=1754018
Flashing international roms can really screw these phones up, so you're going to need to do a full wipe.
Also, don't use CWM, which not supported for this phone and can cause problems. You need to push TWRP recovery in fastboot if you can get there. Once in, wipe everything, /system included. You should then be able to flash a useable rom.
htc one international - hard brick, tough luck ...
Thanks iElvis ... I downloaded the .zip file in the thread you sent me ... what next? I would like to go back to unrooted stock and let htc OTA updates take care of my phone from a to z. what are the steps please? what do i click on, type what in the terminal? etc ? appreciate your help! thanks again! which files to download, links? etc ... ?
galaxy_note_user said:
Thanks iElvis ... I downloaded the .zip file in the thread you sent me ... what next? I would like to go back to unrooted stock and let htc OTA updates take care of my phone from a to z. what are the steps please? what do i click on, type what in the terminal? etc ? appreciate your help! thanks again! which files to download, links? etc ... ?
Click to expand...
Click to collapse
If you want to be back to stock unrooted just run the Fastboot cmd fastboot OEM lock and then run ruu according to your devices software version in fb as well and you should be good to go.
still bricked htc one x ...
thanks again ... where is that file i should run called fastboot cmd oem .... ? all i have from the unzipped initial file I downloaded is a bunch of files, the .exe files are obviously useless to me ... i double clicked on fastboot terminal file and get a terminal window that says "process completed' without even typing anything ... and then what else? pls bear in mind that I have no clue how to do the things you are telling me to do ... ((
galaxy_note_user said:
thanks again ... where is that file i should run called fastboot cmd oem .... ? all i have from the unzipped initial file I downloaded is a bunch of files, the .exe files are obviously useless to me ... i double clicked on fastboot terminal file and get a terminal window that says "process completed' without even typing anything ... and then what else? pls bear in mind that I have no clue how to do the things you are telling me to do ... ((
Click to expand...
Click to collapse
Did you read that thread I linked? That's got all the instructions you should need.
shall I throw my htc away???
Hi ... sorry for the tardy reply but getting a bit frustrated with this htc (currently using SG3 and iphone 5) ... anyhow, I got to finally understand how to use fastboot and adb but don't know which files exactly to push to this unlocked bricked htc to return to stock? Can you pls provide me with the links to push the necessary files and which files to push first? thanks again ... have a wonderful weekend
No way out ... ? Bricked HTC One X ...
Hi again .... ok, I now know exactly how to use fastboot/adb commands to revive/unbrick my htc one x thanks to you! However, therein lies the biggest dilemma of all ... fastboot wont write to the phone only because it says the battery is too low on my phone which it is ... if I plug my phone into A/C power, phone keeps on rebooting endlessly with 0.5 sec charging (red light on for like half a sec. before it reboots again) ... therefore I am unable to fully charge my bricked phone without it constantly rebooting (endless loop) as soon as it is plugged into the wall or USB laptop (same thing)... SO: if I cannot charge my phone to at least 50% let alone even 15%, fastboot won't work ... what to do??? thanks again for your much appreciated help and support ...
galaxy_note_user said:
Hi again .... ok, I now know exactly how to use fastboot/adb commands to revive/unbrick my htc one x thanks to you! However, therein lies the biggest dilemma of all ... fastboot wont write to the phone only because it says the battery is too low on my phone which it is ... if I plug my phone into A/C power, phone keeps on rebooting endlessly with 0.5 sec charging (red light on for like half a sec. before it reboots again) ... therefore I am unable to fully charge my bricked phone without it constantly rebooting (endless loop) as soon as it is plugged into the wall or USB laptop (same thing)... SO: if I cannot charge my phone to at least 50% let alone even 15%, fastboot won't work ... what to do??? thanks again for your much appreciated help and support ...
Click to expand...
Click to collapse
just leave it plugged in.. it should charge
bricked htc ...
thanks for the reply (appreciate it!) ... will leave phone plugged into the wall with endless loops of rebooting hoping it will eventually charge though I don't know how long this will take ... thanks again, have a great weekend
---------- Post added at 08:51 PM ---------- Previous post was at 08:45 PM ----------
just wondering, if the phone keeps on rebooting that way for hours, won't that damage any hardware in the phone? (screen, motherboard, etc ...)? or the phone can take it? thanks!
bricked htc one x ...
This message is for sm1 ... I was told you have experience on how to use mac os x with htc one x ... I have a bricked htc one x (unlocked and rooted)... battery is extremely low, phone keeps booting endlessly ... i was told by another senior admin here that i have to push a boot.img via fastboot which I finally learned how to do, however, all I get in the terminal app in mac when i try to push the bbot.img is "waiting for device" and it takes too long ... any suggestions would greatly be appreciated ... thanks!
galaxy_note_user said:
This message is for sm1 ... I was told you have experience on how to use mac os x with htc one x ... I have a bricked htc one x (unlocked and rooted)... battery is extremely low, phone keeps booting endlessly ... i was told by another senior admin here that i have to push a boot.img via fastboot which I finally learned how to do, however, all I get in the terminal app in mac when i try to push the bbot.img is "waiting for device" and it takes too long ... any suggestions would greatly be appreciated ... thanks!
Click to expand...
Click to collapse
if the phone is charged, make sure you reboot to bootloader (hold the volume down button as it boots), then you can get into fastboot mode.
Hello xda,
a friend of mine just gave me his HTC Sensation because it isnt running quite a while. The problem is that i haven't had a HTC device ever and I don't really know what to do and what information you need to help me so I'd be happy if u just tell me what information you need and I will try to get them for you.
The Information I got so far is:
- if I want to boot it, it stays at the HTC Logo
- CWM starts with some errors but you can't perform a wipe (just turns off)
- Bootloader starts as well but you can't perform wipe either, nor flash new CWM
- If i connect it with the computer while in fastboot it changes to "fastboot usb" but adb cannot find the device, though i installed first the drivers, lateron htc sync. Windows just calls it "myhtc"
bootloader says:
"PYRAMID PVT SHIP S-OFF RL
HBOOT . 1.27.1100
RADIO - 11.22.3594.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34"
So what should I try to do or what information will you need.
I would be very happy if u can help me
fnstGoliath said:
Hello xda,
a friend of mine just gave me his HTC Sensation because it isnt running quite a while. The problem is that i haven't had a HTC device ever and I don't really know what to do and what information you need to help me so I'd be happy if u just tell me what information you need and I will try to get them for you.
The Information I got so far is:
- if I want to boot it, it stays at the HTC Logo
- CWM starts with some errors but you can't perform a wipe (just turns off)
- Bootloader starts as well but you can't perform wipe either, nor flash new CWM
- If i connect it with the computer while in fastboot it changes to "fastboot usb" but adb cannot find the device, though i installed first the drivers, lateron htc sync. Windows just calls it "myhtc"
bootloader says:
"PYRAMID PVT SHIP S-OFF RL
HBOOT . 1.27.1100
RADIO - 11.22.3594.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34"
So what should I try to do or what information will you need.
I would be very happy if u can help me
Click to expand...
Click to collapse
Hi,
Go HERE
Install 4 EXT recovery,using one of the 3 methods available.(probably third)
Then,try to install ARHD ROM.(same guide)
No need to change the firmware.
So I just tried to flash 4 EXT Recovery but it doesn't work..
It finds the zip, ask me whether i want to start the update, i press vol up and "Update is in progres.." appears but nothing more, I'm waiting since 5 minutes and will probably have to power off the phone now.. the same happened when i tried to install cwm so theres something wrong with the bootloader?
What can I do now?
fnstGoliath said:
So I just tried to flash 4 EXT Recovery but it doesn't work..
It finds the zip, ask me whether i want to start the update, i press vol up and "Update is in progres.." appears but nothing more, I'm waiting since 5 minutes and will probably have to power off the phone now.. the same happened when i tried to install cwm so theres something wrong with the bootloader?
What can I do now?
Click to expand...
Click to collapse
Hi,
Maybe you should run a RUU.
Look HERE
I also thought about this but as I said adb doesn't find the device.
Since I never ran a RUU, can I still flash or do I have to get adb to run with the device.
Anyway, I cannot read out the CID of the device so if it is possible, which RUU should I flash?
Thanks for your help
fnstGoliath said:
I also thought about this but as I said adb doesn't find the device.
Since I never ran a RUU, can I still flash or do I have to get adb to run with the device.
Anyway, I cannot read out the CID of the device so if it is possible, which RUU should I flash?
Thanks for your help
Click to expand...
Click to collapse
Hi,
Try installing these windows 7 & 8 drivers (assuming you have a windows 7 or 8 machine)
Reboot your PC and see if your phone is recognized in ADB.
You are s-off,so you do not have to match it 100%
Just get a RUU that is close to your region or carrier.
If you get the wrong one,it is not a problem.
It will just give you an error.
Then,just try another.
)
Well I just installed those drivers but same result as before..
Windows says "MyHTC" and after i write "adb devices" into the cmd window it says "daemon not running. starting it on port 5037. daemon started succesfully. List of devices attached." and the next time i write adb devices it just says "List of devices attached".
Bootloader still says Fastboot USB.
So maybe there's something wrong with my adb?
Well can i flash RUU without adb finding my device or cant I?
fnstGoliath said:
Well I just installed those drivers but same result as before..
Windows says "MyHTC" and after i write "adb devices" into the cmd window it says "daemon not running. starting it on port 5037. daemon started succesfully. List of devices attached." and the next time i write adb devices it just says "List of devices attached".
Bootloader still says Fastboot USB.
So maybe there's something wrong with my adb?
Well can i flash RUU without adb finding my device or cant I?
Click to expand...
Click to collapse
Hi,
Not sure what is happening with your ADB.
Look HERE for help.
In order to run a RUU ,you need to put the bootloader into fastboot,and plug in the USB.
It should show what yours is showing.
So, it should work.
After "List of devices attached" there is no device shown, I didn't leave anything adb shows, so this is still right? Usually it always shows my device ^^
So my adb is probably not running right or it is about my phone
So my next step should be adb showing my device and therefore reinstall android sdk, java, stuff until it might show the phone
or just do something with the phone?
I still think that i cannot run a ruu without any device shown? Didnt really get an answer on this question I guess or I didnt realize it
fnstGoliath said:
After "List of devices attached" there is no device shown, I didn't leave anything adb shows, so this is still right? Usually it always shows my device ^^
So my adb is probably not running right or it is about my phone
So my next step should be adb showing my device and therefore reinstall android sdk, java, stuff until it might show the phone
or just do something with the phone?
I still think that i cannot run a ruu without any device shown? Didnt really get an answer on this question I guess or I didnt realize it
Click to expand...
Click to collapse
Hi,
Just run the RUU.
It will only show error if it does not work.
No big deal,and no damage done.
Just try another one.
if you enable usb debugging might help too
Well.. I just started "RUU_Pyramid_HTC_Europe_1.50.401.1_Radio_10.56.9035.00U_10.14.9035.01_M_release_223042_signed" and everything went fine until installation, no errors at all. Now the installer is stuck at "restarting bootloader" (or something equal, the installation is german) and the phone didnt do anything at all. It's now 15 minutes since the installation started so I probably will try another one but isn't it weird that ther is no error at all?
What should I do if the next RUU does exactly the same?
*edit:
just seeing page 2. How should I enable usb debugging without booting the phone?
*edit2:
second RUU: Same thing, no error but it didnt go further then "Restarting bootloader".
What to do now?
Any further Ideas what I could try?
Puuuush
fnstGoliath said:
Any further Ideas what I could try?
Puuuush
Click to expand...
Click to collapse
Put phone into bootloader then connect to pc and run the RUU
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
The phone was in fastboot usb while running the ruu for sure ..
fnstGoliath said:
The phone was in fastboot usb while running the ruu for sure ..
Click to expand...
Click to collapse
Hi,
Try running a RUU with the same radio (11.22) that you have installed.
You will not damage the phone.
It is not always an exact science with RUU.
Sometimes it is just trial and error.
So it is often that there is no error at all?
I just thought flashing wrong RUU will cause an error and not stopping at restarting bootloader. And anyway the bootloader seems pretty broken since it is not flashing anything at all ^^
Still i gonna try it
fnstGoliath said:
So it is often that there is no error at all?
I just thought flashing wrong RUU will cause an error and not stopping at restarting bootloader. And anyway the bootloader seems pretty broken since it is not flashing anything at all ^^
Still i gonna try it
Click to expand...
Click to collapse
Hi,
Probably ,the only thing that will fix your problem is a RUU.
So,keep trying different ones until it works.
I finally managed to find the phone via adb! I think that's a great step.
The biggest problem is that I lose any contact to the phone when i reboot it into bootloader.
I can just boot the phone into recovery and use any other adb function but as soon as I boot it into bootloader I can't do anything anymore.
That's why I cannot use any fastboot commands to flash a zip, neither run a RUU completely i guess.
So I think that i need any rom to either flash via recovery or just via PC not using fastboot/bootloader at all.
Are there any possibilities for me now?
fnstGoliath said:
I finally managed to find the phone via adb! I think that's a great step.
The biggest problem is that I lose any contact to the phone when i reboot it into bootloader.
I can just boot the phone into recovery and use any other adb function but as soon as I boot it into bootloader I can't do anything anymore.
That's why I cannot use any fastboot commands to flash a zip, neither run a RUU completely i guess.
So I think that i need any rom to either flash via recovery or just via PC not using fastboot/bootloader at all.
Are there any possibilities for me now?
Click to expand...
Click to collapse
Hi,
Plug your phone into the PC.
Go to device manager,and where it says MyHTC,right click and update driver.
Browse to the windows 7 & 8 drivers I gave you earlier.
Update,unplug phone ,and reboot PC.
Get a RUU that shows 3.32 or 3.33 in the title,and matches your region
Pull your battery.
Put it back in,and hold volume down and power button together.
Scroll to fastboot.
Plug in usb and run RUU from the PC
First off all, sorry for my horrible english
Today I wanted to make S-Off with the juopunutbear tool for windows (version 0,4) but it crashed and now I cant start my phone. I am always starting automatically in to the bootloader.
My first fault was that I hadn't installed the stock RUU. And my second fault was that I interrupted the process.when the juopunutbear logo was on my screen.
My computer doesnt detect my phone in the fastboot mode -.- I have all backups which were made by juopunutbear
Is there any possibility to repair the phone or is it dead? It is unlocked by HTC Dev.
If you need more Information, say it.
StormUltimate said:
First off all, sorry for my horrible english
Today I wanted to make S-Off with the juopunutbear tool for windows (version 0,4) but it crashed and now I cant start my phone. I am always starting automatically in to the bootloader.
My first fault was that I hadn't installed the stock RUU. And my second fault was that I interrupted the process.when the juopunutbear logo was on my screen.
My computer doesnt detect my phone in the fastboot mode -.- I have all backups which were made by juopunutbear
Is there any possibility to repair the phone or is it dead? It is unlocked by HTC Dev.
If you need more Information, say it.
Click to expand...
Click to collapse
You can access to bootloader or the device is not starting at all?
StormUltimate said:
First off all, sorry for my horrible english
Today I wanted to make S-Off with the juopunutbear tool for windows (version 0,4) but it crashed and now I cant start my phone. I am always starting automatically in to the bootloader.
My first fault was that I hadn't installed the stock RUU. And my second fault was that I interrupted the process.when the juopunutbear logo was on my screen.
My computer doesnt detect my phone in the fastboot mode -.- I have all backups which were made by juopunutbear
Is there any possibility to repair the phone or is it dead? It is unlocked by HTC Dev.
If you need more Information, say it.
Click to expand...
Click to collapse
Do you have all drivers for fastboot installed correctly?
Mile_zdr said:
You can access to bootloader or the device is not starting at all?
Click to expand...
Click to collapse
I can access to bootloader, it is starting automatically in to it.
szotaa said:
Do you have all drivers for fastboot installed correctly?
Click to expand...
Click to collapse
I think yeah. I downloaded the adb things and copied it to "C:\adb". I installed HTC drivers by installing HTC sync. I deinstalled HTC sync after installing it but it did not delete the drivers.
EDIT: I am booting automatically to the juponutBear screen but I can access to bootloader.
And it is Version 0.5 and not 0.4 ^^
StormUltimate said:
I can access to bootloader, it is starting automatically in to it.
I think yeah. I downloaded the adb things and copied it to "C:\adb". I installed HTC drivers by installing HTC sync. I deinstalled HTC sync after installing it but it did not delete the drivers.
EDIT: I am booting automatically to the juponutBear screen but I can access to bootloader.
And it is Version 0.5 and not 0.4 ^^
Click to expand...
Click to collapse
you can post what your bootloader says or take a pic of what your bootloader look ?
StormUltimate said:
I think yeah. I downloaded the adb things and copied it to "C:\adb". I installed HTC drivers by installing HTC sync. I deinstalled HTC sync after installing it but it did not delete the drivers.
Click to expand...
Click to collapse
Download this file: http://www.filedropper.com/fastbootflash
Unzip it. Plug in you phone to PC via usb to PC in fastboot mode. (bootloader must say fastboot usb)
Open start here.bat from folder you just have downloaded. Then type "fastboot devices" in start here.bat window. If nothing happens then your phone may not respond to fastboot or you have drivers wrongly installed. If it gives some numbers then your fastboot is working correctly. In case of nothing happening I reccomend installing universal naked driver ( http://forum.xda-developers.com/showthread.php?t=1161769 ) and repeating steps i gave you.
Mile_zdr said:
you can post what your bootloader says or take a pic of what your bootloader look ?
Click to expand...
Click to collapse
It is everything normal but I cant make a pic without a phone ^^
szotaa said:
Download this file: http://www.filedropper.com/fastbootflash
Unzip it. Plug in you phone to PC via usb to PC in fastboot mode. (bootloader must say fastboot usb)
Open start here.bat from folder you just have downloaded. Then type "fastboot devices" in start here.bat window. If nothing happens then your phone may not respond to fastboot or you have drivers wrongly installed. If it gives some numbers then your fastboot is working correctly. In case of nothing happening I reccomend installing universal naked driver ( http://forum.xda-developers.com/showthread.php?t=1161769 ) and repeating steps i gave you.
Click to expand...
Click to collapse
I tried it and it doesnt work. I downloaded the naked drivers and installed it (Windows 8.1) but it doesnt worked. No response from fastboot. And there is no "fastboot usb" only "fastboot".
StormUltimate said:
It is everything normal but I cant make a pic without a phone ^^
I tried it and it doesnt work. I downloaded the naked drivers and installed it (Windows 8.1) but it doesnt worked. No response from fastboot. And there is no "fastboot usb" only "fastboot".
Click to expand...
Click to collapse
To make it say fastboot usb you sometimes have to connect your phone to pc on fastboot and then press vol up or down to refresh it and then fastboot usb appears.
Wysłane z mojego HTC Sensation przy użyciu Tapatalka
szotaa said:
To make it say fastboot usb you sometimes have to connect your phone to pc on fastboot and then press vol up or down to refresh it and then fastboot usb appears.
Wysłane z mojego HTC Sensation przy użyciu Tapatalka
Click to expand...
Click to collapse
Ok, fastboot USB is there. My Computer say all the time "Device cannot be recognized / identify" -.- Yeah, I reinstalled the drivers.
P.S. You can write in polish I can speak and read polish but my written polish is more horrible than my written english
StormUltimate said:
Ok, fastboot USB is there. My Computer say all the time "Device cannot be recognized / identify" -.- Yeah, I reinstalled the drivers.
P.S. You can write in polish I can speak and read polish but my written polish is more horrible than my written english
Click to expand...
Click to collapse
Then IDK whats the problem. You may try installing ruu (but as far as I know it requires working fastboot to install) which can be found in sensation android development section. I'll dig the forum tommorow looking for fix because Im too tired today. Sorry :c. I wish I could write in polish but this is an english forum and it is not allowed to speak other launage over here.
Wysłane z mojego HTC Sensation przy użyciu Tapatalka
StormUltimate said:
It is everything normal but I cant make a pic without a phone ^^
I tried it and it doesnt work. I downloaded the naked drivers and installed it (Windows 8.1) but it doesnt worked. No response from fastboot. And there is no "fastboot usb" only "fastboot".
Click to expand...
Click to collapse
since you are in windows 8.1 use these drivers
http://d-h.st/CE9
also you are seeing the jb screen because probably you didn't remove the temproot
rzr86 said:
since you are in windows 8.1 use these drivers
http://d-h.st/CE9
also you are seeing the jb screen because probably you didn't remove the temproot
Click to expand...
Click to collapse
The drivers doesnt work -.-
I had perm root (I think). Root was all the time active.
I will try it later on an other computer with Windows 7 and if it doesnt work, I will buy a new (not completly news ) HTC Sensation. But it is the last possibility
StormUltimate said:
The drivers doesnt work -.-
I had perm root (I think). Root was all the time active.
I will try it later on an other computer with Windows 7 and if it doesnt work, I will buy a new (not completly news ) HTC Sensation. But it is the last possibility
Click to expand...
Click to collapse
by the way you can flash a ruu manually without pc
no need to buy another sensation
rzr86 said:
by the way you can flash a ruu manually without pc
no need to buy another sensation
Click to expand...
Click to collapse
The other PC is working <3 Fastboot is working ^^ I try to install my backup but you can give me an instruction
It is working again : D <3 Recovery is working, I think that I will make the rest alone.
EDIT: Working 100% now
Hi Experts,
I have a HTC sensation XE. Suddenly my phone is not starting and it just displays the HTC screen and restarts.
I have attached the screen shot for reference.
I'm new to Android and i wanted to try my self fixing this issue.:good:
I bought phone in Vodafone Australia outlet and I unlocked the Sim and using with other operators as well for the last 2 years.
Did you factory reset the phone and wipe cache, Dalvik, etc.? If not please do so and reinstall your Custom ROM. This happens when you have not fully wiped your phone.
wieman01 said:
Did you factory reset the phone and wipe cache, Dalvik, etc.? If not please do so and reinstall your Custom ROM. This happens when you have not fully wiped your phone.
Click to expand...
Click to collapse
actually i don't think he has a custom rom because he is on S-ON and locked
surendrakumarn see this thread
http://forum.xda-developers.com/showthread.php?t=1672425
Oh yes, I was responding prematurely. You're right, I was off-topic.
I tried factory reset, it didn't work. Ill try the steps given for RUU. Thanks.
Hi ,
I have followed the steps and installed SDK. When i execute the below command to find CID its telling "fastboot is not a recognized command"
fastboot getvar cid
In my phone is coming as fastboot USB. Is it due to that i didn't set the USB debug ON? Currently my phones is not starting so i cannot goto settings and enable USB debug, etc. Please provide a solution
surendrakumarn said:
Hi ,
I have followed the steps and installed SDK. When i execute the below command to find CID its telling "fastboot is not a recognized command"
fastboot getvar cid
In my phone is coming as fastboot USB. Is it due to that i didn't set the USB debug ON? Currently my phones is not starting so i cannot goto settings and enable USB debug, etc. Please provide a solution
Click to expand...
Click to collapse
yes usb debugging mode should be enabled
since you bought the device from vodafone Australia probably your cid is VODAP021
rzr86 said:
yes usb debugging mode should be enabled
since you bought the device from vodafone Australia probably your cid is VODAP021
Click to expand...
Click to collapse
Can you please tell me the correct RUU and the link to download it.I'm finding bit difficult to get the correct link.
surendrakumarn said:
Can you please tell me the correct RUU and the link to download it.I'm finding bit difficult to get the correct link.
Click to expand...
Click to collapse
see here
http://forum.xda-developers.com/showthread.php?t=1672425
surendrakumarn said:
Hi ,
I have followed the steps and installed SDK. When i execute the below command to find CID its telling "fastboot is not a recognized command"
fastboot getvar cid
In my phone is coming as fastboot USB. Is it due to that i didn't set the USB debug ON? Currently my phones is not starting so i cannot goto settings and enable USB debug, etc. Please provide a solution
Click to expand...
Click to collapse
I have read it somewhere that you need to run the fastboot as an administrator. Give it a try