HFS ROM For Xperia Miro!!
This port was for some people requests :good:
About The ROM:
This Port has nothing more or less than the original HFS ROM For Tipo, By @pykfree !!
Screenshots: see attachments
How To Install:
-Download the ROM and the Fix, dump them to your phone
-Reboot to CWM recovery
-wipe data & cache & dalvik
-wipe /system (Go to mounts and storage> format /system> select yes)
-go back to main menu
-select "install from sd card"
-Browse to the ROM file and install it
-after installing the ROM install HFS Fix
-flash the Xperia album and videos package
-go to main menu again
-go to advanced
-select "fix permissions"
-Flash SuperSU Update
-reboot and DONE!!!
Download Links:
Download ROM File From HERE
Download the Fix From HERE
To add Xperia album and Videos apps, flash This
SuperSU Update from HERE (the link is the same from the original Xperia tipo thread)
Special Thanks to:
-Allah for helping me in my Hole life (Not just android development )
- @pykfree for his great ROM
- XDA Forum for giving me the chance to post my work, thanks xda !!!!
Hit Thanks if you like My work!!
stuck at boot :/ is it only about me ? using vengeance kernel (not new version) [new version stuck at boot too.]
egemaster said:
stuck at boot :/ is it only about me ? using vengeance kernel (not new version) [new version stuck at boot too.]
Click to expand...
Click to collapse
please try with stock kernel first, then after the 1st boot, flash vengeance, and follow the instructions as they are in the thread
I hope it will work for you
looks nice bro, thanks for your port
You're so welcome
JuniorCaesar said:
looks nice bro, thanks for your port
Click to expand...
Click to collapse
It's my pleasure
E: Can't open/sdcard/Download/HFS-Material-Rom-Edition-Finale-Miro.zip
(bad)
Installation aborted.
What's wrong? I downloaded directly all the requirements to my device.
hello
mssir said:
E: Can't open/sdcard/Download/HFS-Material-Rom-Edition-Finale-Miro.zip
(bad)
Installation aborted.
What's wrong? I downloaded directly all the requirements to my device.
Click to expand...
Click to collapse
if the recovery says that the the zip is bad, then it must be corrupted
try re-downloading the file :good:
Where is the GAPPS?
Is that GAPPS included in this ROM?
Mirrors please
cssolution99 said:
Is that GAPPS included in this ROM?
Click to expand...
Click to collapse
this is an ICS based ROM and it comes with Gapps Pre-installed
all what you need is already packed in the ROM, flash it and enjoy!!
if you have any problems, please don't hesitate for asking for help!
thelostneutron said:
Mirrors please
Click to expand...
Click to collapse
you can't download from 4shared? if you can't, then I'll re-upload it to Mega
akramhadji said:
you can't download from 4shared? if you can't, then I'll re-upload it to Mega
Click to expand...
Click to collapse
Tried installing cm10 without unlocking BL. Got ot bricked.
thelostneutron said:
Tried installing cm10 without unlocking BL. Got ot bricked.
Click to expand...
Click to collapse
you will need xperia flashtool to repair your phone, after that you can install this ROM (this ROM is NOT cm10 based!) :good:
good luck bro
akramhadji said:
you will need xperia flashtool to repair your phone, after that you can install this ROM (this ROM is NOT cm10 based!) :good:
good luck bro
Click to expand...
Click to collapse
http://developer.sonymobile.com/services/flash-tool/
This??
---------- Post added at 01:36 PM ---------- Previous post was at 01:36 PM ----------
akramhadji said:
you will need xperia flashtool to repair your phone, after that you can install this ROM (this ROM is NOT cm10 based!) :good:
good luck bro
Click to expand...
Click to collapse
http://developer.sonymobile.com/services/flash-tool/
This??
thelostneutron said:
http://developer.sonymobile.com/services/flash-tool/
This??
---------- Post added at 01:36 PM ---------- Previous post was at 01:36 PM ----------
http://developer.sonymobile.com/services/flash-tool/
This??
Click to expand...
Click to collapse
yes
sorry for late reply
Hey nice work, great rom with some nice touch customization, i do have few qustions....
How do i change icons in status bar and use one that i need?
I instaled few apps from play store, fb, instagram, vider and whatssup. When i moved them to sd card and restarted phone, they are missing so i had to reinstal them.
some times i get app not responding msg for google play store and cant start instagram or fb.
So im runing 3/4 aps ( removed fb ) and im getting lots of lags...
Any sugestion what to try ?
I use to be on cm 10, ( got lots of lags after 2 years ) so i went back to stock and tried this one and so far it looks good.
Thees few things i would like to fix
And i almost forget, phone book wont let me ad vc card to restore my contacts, i do have 3 of them on sd card and did copy them to internal storage and still when go to import contacts it sayes no vc on phone.
Hello and thank you for using my rom!
starter_ns said:
Hey nice work, great rom with some nice touch customization, i do have few qustions....
How do i change icons in status bar and use one that i need?
I instaled few apps from play store, fb, instagram, vider and whatssup. When i moved them to sd card and restarted phone, they are missing so i had to reinstal them.
some times i get app not responding msg for google play store and cant start instagram or fb.
So im runing 3/4 aps ( removed fb ) and im getting lots of lags...
Any sugestion what to try ?
I use to be on cm 10, ( got lots of lags after 2 years ) so i went back to stock and tried this one and so far it looks good.
Thees few things i would like to fix
And i almost forget, phone book wont let me ad vc card to restore my contacts, i do have 3 of them on sd card and did copy them to internal storage and still when go to import contacts it sayes no vc on phone.
Click to expand...
Click to collapse
ok, so for the statusbar icons, search in the settings and you will find a lot of options to customize the statusbar (including icons)
if you have any problems with apps, then try fixing permissions from CWM recovery.
as for the vc files, try creating a folder named "System" then another folder named "PIM" inside that "System" folder you just created, then put all your vc files there, and try again
if anything went wrong, try reinstalling the rom with full wipe (wipe the Data and cache and the system partitions, then go to your phone internal memory and remove the "Android" folder) and after installing the rom, fix permissions.
hope this helped
akramhadji said:
HFS ROM For Xperia Miro!!
This port was for some people requests :good:
About The ROM:
This Port has nothing more or less than the original HFS ROM For Tipo, By @pykfree !!
Screenshots: see attachments
How To Install:
-Download the ROM and the Fix, dump them to your phone
-Reboot to CWM recovery
-wipe data & cache & dalvik
-wipe /system (Go to mounts and storage> format /system> select yes)
-go back to main menu
-select "install from sd card"
-Browse to the ROM file and install it
-after installing the ROM install HFS Fix
-flash the Xperia album and videos package
-go to main menu again
-go to advanced
-select "fix permissions"
-Flash SuperSU Update
-reboot and DONE!!!
Download Links:
Download ROM File From HERE
Download the Fix From HERE
To add Xperia album and Videos apps, flash This
SuperSU Update from HERE (the link is the same from the original Xperia tipo thread)
Special Thanks to:
-Allah for helping me in my Hole life (Not just android development )
- @pykfree for his great ROM
- XDA Forum for giving me the chance to post my work, thanks xda !!!!
Hit Thanks if you like My work!!
Click to expand...
Click to collapse
Can you port this rom to xperia e dual?
Great rom
o this is an old device, most ppl dont use it anymore and some still have it like me :angel: .... I made some more screensshots for u and ppl who wants to see how does it look and what is that this rom is offering to them. I tought no one will still make roms for mirro but u suprised me a lot
So here are pics and for i can tell this rom works perfect, there are some lags from time to time ( its old device with low memory ) so dont exprect super fast brand new miro to work like iphone or some 400$ phone. It has many features and editing options in this rom (u can se from pics ) and the battery - it lasts ( thats important ), fb well u can live withoutit :fingers-crossed: ( it cous some lags ) other than that, other apps work realy good.
Smooth, fast, not bugy and interesting rom. Good job and Thanx for making this.
akramhadji said:
ok, so for the statusbar icons, search in the settings and you will find a lot of options to customize the statusbar (including icons)
if you have any problems with apps, then try fixing permissions from CWM recovery.
as for the vc files, try creating a folder named "System" then another folder named "PIM" inside that "System" folder you just created, then put all your vc files there, and try again
if anything went wrong, try reinstalling the rom with full wipe (wipe the Data and cache and the system partitions, then go to your phone internal memory and remove the "Android" folder) and after installing the rom, fix permissions.
hope this helped
Click to expand...
Click to collapse
I did fresh instal and wipe all 2 times and now it works like a charm
Related
A510 Custom Light Stock ROM Odexed
built on Acer_AV041_A510_1.099.00 and
NoThrills WorldWide optimized Stock ROM
I made this rom for my personal use but I want to share it with you
First of all, I'd like to thank you NoThrills for his roms and recovery
This rom is very close up to his, so take a look at main features on his topic
Here's what's changed:
rom is fully ODEXED (speed up boot and default applications)
default launcher replaced by HoloLauncherHD (JellyBean like launcher)
screen sensitivity bug "removed" (tablet will always start with sensitivity set to high)
olympic stuff removed (wallpaper removed and bootanimation set to iconia tab)
all Acer applications removed exept Ring, Print, DolbyMobile and DRMVideoPlayer
AmazonApps, FileManagerHD, FlashPlayer and TitaniumBackup added to flexrom
all apps up to date on 2012-10-02
Phone services removed to save more battery
original Acer kernel
Installation:
If you don't have it already, install the CWM-Based Recovery.
Download the ROM from this post and put the .ZIP file on your internal or external SD Card.
Start Recovery by powering down your device, holding the Volume down (**) button and turning it on again.
Make a Nandroid Backup. Select backup and restore and choose one of the backup options.
Select wipe data/factory reset. Select format /flexrom in mount menu.
Install this ROM by choosing install zip from sdcard and then choose zip from sdcard or choose zip from external sdcard.
Wait for the installation to finish and select reboot system now.
DOWNLOAD
ps: sorry if my english is not perfect ....
Thx for ur sharing :good:
kernel from nothrill...
I will try this rom...now downloading
The rom has stock kernel, can i install nothrills kernel?
any screenshots of the holo launcher in action?
palotex said:
The rom has stock kernel, can i install nothrills kernel?
Click to expand...
Click to collapse
yes you can but NoThrills doesn't provide it as a flashable zip, you'll have to do it yourself
and you 'll lose the fix for screen bug sensitivity because it's include in my stock kernel
Rusty_Gunn said:
any screenshots of the holo launcher in action?
Click to expand...
Click to collapse
no because by default you'll have the same as the default launcher
you just have some jellybean option and other features, take a look here
great, a new dev is a good news
BENETNATH said:
great, a new dev is a good news
Click to expand...
Click to collapse
yeah french dev here lol, but I'm more a modder than a dev
and it will be my first and last rom for A510 ... I'm selling it
ouch, why ? not satisfied with it ? (how much ? seems acer does not want to send mine back ..)
BENETNATH said:
ouch, why ? not satisfied with it ? (how much ? seems acer does not want to send mine back ..)
Click to expand...
Click to collapse
not totally satisfied with touch screen, too hard to play emulators or games that need to press more than 4 fingers ....
in any case for the price it's a good product ... but I prefer using the Asus transformer. I'll send you more details in french by PM
I have the same..want to sell it too. It's not the product that I thought it would be. Maybe gonna buy the TF300 with keyboard. I hate the touch problems.
Sent from my HTC Vision using xda app-developers app
meldrak said:
(exept AcerRing that I wasn't able to integrate update)
Click to expand...
Click to collapse
You may try to copy /data/data/com.acer.android.acerring/lib/* to /system/lib/* -this file may be not needed by older AcerRing version or it can be extracted during first boot (this is system app after all, "market apps" do this during installation only)
good idea I'll take a look tonight if I have time
also some feedbacks are welcome
No root in this rom?
johnsk said:
No root in this rom?
Click to expand...
Click to collapse
Since this rom was built over NoThrills' I would assume (& expect) that it is pre-rooted.
johnsk said:
No root in this rom?
Click to expand...
Click to collapse
yes you'll have all the same as NoThrills exept the list mentioned on first post
Hi,
what means "•Phone services removed to save more battery" ?
Is there really more battery (about 30min - 1h) or only 10min?
Phone.apk and TelephonyProvider.apk are removed, it's about 20~60min in standby mode or 10min in use
it's also less memory used, a better stability I think
But without it you can't do a factory reset from setting menu (use recovery instead)
and I think it will block the OTA checking
but with a custom root rom you don't need this features
I had using ur rom for 1 day, everything good :good:
Thx so much for ur hardwork.
Thx for remove the useless phone feature in this rom.
Maybe u can try Go Laucher HD, all free n nice.
go launcher is good but not stable
I prefer hololauncher because very close to stock and fully optimized for ICS
http://forum.xda-developers.com/showthread.php?t=1800872
I've just updated the post with a small update acer ring is now up to date and odexed in the rom
no needs to wipe if you have already previous version I think ...
meldrak said:
I've just updated the post with a small update acer ring is now up to date and odexed in the rom
Click to expand...
Click to collapse
So library was missing? Works from /system/lib or you had to add symlink/script to copy it?
meldrak said:
no needs to wipe if you have already previous version I think ...
Click to expand...
Click to collapse
I'd advise to wipe dalvik-cache, just to be sure
For some reasons,the other thread "Alcatel ot 991 gradu ROM v1.0 (jelly bean mod)" was closed,so i moved it here.Thanks,Archer!
1.
New custom rom (jelly bean mod) for Alcatel One Touch 991
Don't forget to make a backup of your phone before installing this custom ROM.
1.You need new Clockworkmood + Root.
2.Unzip "gradu's (jelly bean mod) ROM.zip" in your computer.
3.Copy the zip files "gradu ROM v1 file 1" and "gradu ROM v1 file 2" on your sd card.
4.After copy,boot into CWM, Wipe data/factory reset,and Wipe cache partition.
5."Install zip from sd card" - first install "gradu ROM v1.0 file 1" then "gradu ROM v1.0 file 2".
6.Restart the phone and wait 2-3 minutes.
Enjoy it!
ALCATEL OT 991 GRADU V1.0 CUSTOM ROM here(click to download)
Features:
-changed main boot image
-Holo Launcher Pro+Jelly Bean Icons
-new JB apps
-more system apps helping you access system files and freeing memory (link2sd,root explorer,anttek)-NEED ROOT
-Clockworkmod already installed
-Free Antivirus Pro for 1 year
-Jelly Bean black status bar.
Main features of JellyBean StatusBar:
-Clones the official status bar from Android 4.1
-Allows support for third party notifications
-Auto-detection for hidden status bar or screen orientation
-Task killer safe! Will auto-reboot when killed
-Smooth gestures for default pull down
-Settings to choose what content you want to display
-Exclusion list for unwanted application notifications
-Notification Counter for repeating notifications
-0% battery drain (based on normal device use)
-Low ram foot print of under 24mb
and much more!
*For boot logo and battery animation,flash logo.bin with Flash Tool.
http://fastupload.ro/ca08ebd2c892c15b619082575760a7ea.html - logo.bin
2.
GingerSam ®by Gradu download link:
https://www.dropbox.com/s/b4oc2u3kllkceum/Gingersam.zip?dl=0
3.
GingerSam for 991D ®by Gradu download link:
https://www.dropbox.com/s/j3yrfmpeywfxo3w/Gingersam991D.zip?dl=0
4.
GingerSam v 2.0 ®by Gradu download link:
https://www.dropbox.com/s/fu6bbqpb9od75x0/Gingersam 2 new.zip?dl=0
*Screenshots soon
*For boot logo and battery animation,flash logo.bin with Flash Tool.
LOGO.BIN download link: https://www.dropbox.com/s/oujfz2y2eqr33f0/logo.bin
Boot logo and battery animation screenshots here
Restore.zip download link here
Backup.zip download link here (use it only if you want to backup your rom)
Some infos about GingerSam:
-RAM memory: 90 MB
-ROM memory: 144 MB
-Font type: Comic Sans MS(Droid Serif Italic)
-Samsung bootanimation
-Samsung sounds(notifications,message,etc)
-Samsung Galaxy S3 wallpaper
-CRT-Off animation
-Black statusbar
and much more!
*The installing method is a little different.Just read the Informations.
Installing GingerSam ®by Gradu:
-Download Gingersam.zip/Gingersam 991D.zip + Restore.zip
1.Unzip Gingersam.zip/Gingersam991D.zip
2.Create a folder named "firmware" on sdcard
3.Copy all .img files in folder "firmware"
4.Copy Restore.zip on sdcard (if you want to backup your rom ,copy backup.zip on sdcard and install it in recovery mode.
You have to know that everytime you install backup.zip,the .img files in "firmware" folder will be replaced)
5.Enter in recovery mode(boot into CWM) -> install zip from sdcard -> choose zip from sdcard -> Restore.zip -> Yes
6.Reboot device
Enjoy it!
If you like it,hit "Thanks".
Boot logo and battery animation screenshots here
*For boot logo and battery animation,flash logo.bin with Flash Tool.
LOGO.BIN download link: https://www.dropbox.com/s/oujfz2y2eqr33f0/logo.bin
Some screenshots of the GingerSam rom:
can You make for OT991D with dual sim ?
Have you rom Spanish?
Yes,it has.in fact,i bought my phone from Spain
Sent from my
ALCATEL_ONE _TOUCH_991 using xda app-developers app
petrolerin said:
can You make for OT991D with dual sim ?
Click to expand...
Click to collapse
I'm still working on this,but when i will finish it,i will let you know
Sent from my
ALCATEL_ONE _TOUCH_991 using xda app-developers app
ok,thanks
very good news....does it have ext2 support? or can we install scripts to increase internal memory space and have better ram management?
thx again :good:
adi.v said:
very good news....does it have ext2 support? or can we install scripts to increase internal memory space and have better ram management?
thx again :good:
Click to expand...
Click to collapse
yes,you can install scripts,but if you can wait,this days i will upload it again with ext2.
Sent from my
ALCATEL_ONE _TOUCH_991 using xda app-developers app
Gradu2012 said:
yes,you can install scripts,but if you can wait,this days i will upload it again with ext2.
Sent from my
ALCATEL_ONE _TOUCH_991 using xda app-developers app
Click to expand...
Click to collapse
i'll gladly wait
p.s. i'm from cluj
I get this error :
E:signature verification failed.
The phone is rooted and installed Clockworkmood.
Thanx
DJNimrod said:
I get this error :
E:signature verification failed.
The phone is rooted and installed Clockworkmood.
Thanx
Click to expand...
Click to collapse
It's because signature check is "Enabled".You have to boot into clockworkmood then choose "Install zip from sdcard",then "Toggle signature verification".After choosing this,you will see a message"Signature check: Disabled".Now you can choose zip from sdcard and install it.Enjoy it!
Sent from my
ALCATEL_ONE _TOUCH_991 using xda app-developers app
Gradu2012 said:
It's because signature check is "Enabled".You have to boot into clockworkmood then choose "Install zip from sdcard",then "Toggle signature verification".After choosing this,you will see a message"Signature check: Disabled".Now you can choose zip from sdcard and install it.Enjoy it!
Sent from my
ALCATEL_ONE _TOUCH_991 using xda app-developers app
Click to expand...
Click to collapse
Is it also for OT991D with dual sim? If not, can you change it?
Why there are in any custom Rom differences, because if i look at the Alcatel-Upgrade-Tool (OTA), there is only ONE download for BOTH versions, 991 and 991D ?????
Oh...and how can i change the integrated Holo-Launcher with Go launcher? With normal installation (theni have two launchers) the phone is mega slowly :crying:
catdoggy said:
Is it also for OT991D with dual sim? If not, can you change it?
Why there are in any custom Rom differences, because if i look at the Alcatel-Upgrade-Tool (OTA), there is only ONE download for BOTH versions, 991 and 991D ?????
Oh...and how can i change the integrated Holo-Launcher with Go launcher? With normal installation (theni have two launchers) the phone is mega slowly :crying:
Click to expand...
Click to collapse
"Is it also for OT991D with dual sim? "-some days ago i already answered to this question and i said i'm still working on it(in fact the problem is that i'm working and this days i didn't have to much time),but don't worry,i will do it.
As for changing Holo Launcher with Go Launcher,i don't know if it's a good ideea(it "eats" a lot of memory),but if you really want to do it,here are the steps:
1.Firstly,you need link2sd installed
2.Install Go Launcher then go to link2sd
3.Search for Holo Launcher,choose it and then "Actions" ->select "Convert to user application" -> Ok
4.Now search Go Launcher and do the same steps,only that you have to choose "Convert to system application"
5.Go to Holo Launcher and uninstall it
6.Reboot your phone
That's it!You have Go Launcher as system application and main launcher!
Enjoy it!
Sent from my
ALCATEL_ONE _TOUCH_991 using xda app-developers app
Can you provide a few screenshots of the looks and the status kernel/ android version.
And if possible I would also like to know the:
Available RAM. and RAM in use.
Available ROM storage.
Available internal storage
What Apps are preinstalled.
Thank you in advance for the answers. I do think alot of people would want to know all of this.
Gradu2012 said:
"Is it also for OT991D with dual sim? "-some days ago i already answered to this question and i said i'm still working on it(in fact the problem is that i'm working and this days i didn't have to much time),but don't worry,i will do it.
As for changing Holo Launcher with Go Launcher,i don't know if it's a good ideea(it "eats" a lot of memory),but if you really want to do it,here are the steps:
1.Firstly,you need link2sd installed
2.Install Go Launcher then go to link2sd
3.Search for Holo Launcher,choose it and then "Actions" ->select "Convert to user application" -> Ok
4.Now search Go Launcher and do the same steps,only that you have to choose "Convert to system application"
5.Go to Holo Launcher and uninstall it
6.Reboot your phone
That's it!You have Go Launcher as system application and main launcher!
Enjoy it!
Sent from my
ALCATEL_ONE _TOUCH_991 using xda app-developers app
Click to expand...
Click to collapse
I´m very sorry, now i see your answer some days ago,too. Please, do not make stress to you and take your time quietly. Changing the laauncher was very easy, but, as you said, eats a lot of memory, so know i´m using holo again
New problem: I made of course a CWM backup of my phone (Stock ROM rooted with my apps) and never problems with restoring it. But after flashing " gradu CUSTOM ROM v1.0" i decide to wait for "v2 DUAL SIM" and till Gradu2012 has made it, I want to use my old ROM.
So i made the restore with CWM (frst Wipe data/factory reset,and wipe cache partition, of course), but the phone now hangs in a boot-loop and also still has the gradu-boat-animation and Sound, instead of the original one....WHY it´s not possible to recover and how can i repair this- the boot-loop?? (New flashing of V1. is no problem and the phone is booting correct, but i want to use my backup!)
Edit: Now i recover with OTA (One Touch Upgrade Tool) to factory version, root it again and then: no problem to recover with my CWM backup...but no idea, why its not possible after installing the Gradu--ROM????
catdoggy said:
New problem: I made of course a CWM backup of my phone (Stock ROM rooted with my apps) and never problems with restoring it. But after flashing " gradu CUSTOM ROM v1.0" i decide to wait for "v2 DUAL SIM" and till Gradu2012 has made it, I want to use my old ROM.
So i made the restore with CWM (frst Wipe data/factory reset,and wipe cache partition, of course), but the phone now hangs in a boot-loop and also still has the gradu-boat-animation and Sound, instead of the original one....WHY it´s not possible to recover and how can i repair this- the boot-loop?? (New flashing of V1. is no problem and the phone is booting correct, but i want to use my backup!)
Edit: Now i recover with OTA (One Touch Upgrade Tool) to factory version, root it again and then: no problem to recover with my CWM backup...but no idea, why its not possible after installing the Gradu--ROM????
Click to expand...
Click to collapse
Wait wait wait...firstly:did you get any error while making bakup before installing gradu CUSTOM ROM ?
And: After wipe factory/cache partition did you select "make backup recovery -> recovery ->yes" ?
For logo image,if it's not working with recovery,you have to flash your logo.img in Flash Tool.
Let me know EXACTLY what doesn't work.
Gradu2012 said:
Wait wait wait...firstly:did you get any error while making bakup before installing gradu CUSTOM ROM ?
Click to expand...
Click to collapse
No, and as i said, with the rooted stock Rom installed, the backup can be flashed back without any errors
And: After wipe factory/cache partition did you select "make backup recovery -> recovery ->yes" ?
Click to expand...
Click to collapse
I don´t know, what you mean- i didn´t made a backup from YOUR ROM. First the phone is in "factory-status", original. Then i´m rooting it, install my apps and change colours, settings, etc. and then I boot into CWM and choose "backup" to make a "home base" with the must-have-apps and settings.
And what ever i do in/with this ROM (i.e. init.d support, install/deinstall apps, changing launcher and so on) i EVER can flash back my backup without errors.
BUT when i flashed YOUR ROM and make the first settings (language, etc.) and then think: "OK, nice, but I need my Dual Sim and therefore want back to my "base", i boot into CWM, then first i choose wipe data/factory reset, then wipe cache partition, then wipe dalvic cache- then i choose "recovery" -> yes and choose my backup file. The recovery process finished without any error, then i choose "reboot system now" and...boooooom....the phone hangs into a boot-loop, the boot-animation and the music starts again and again and again....
Maybe you think: aaah, he has a 991D (Dual Sim), but my ROM is for single Sim....nope, thats nothing to do with it. "Jeffta" made a Custom ROM for Dual Sim very similar to your ROM (two zip files to flash) and when i install this one, test it and want to go back to my base, i have the same failure- bootloop after recover my backup.
At this point there is (for me) no other way than to push the akku out and flash the unrooted original ROM with "Alcatel upgrade tool, root the phone, flash CWM and after all of this, i finally can flash back my "base backup" - the phone then boots normally and after 1 Hour i have back all my apps and settings :crying:
[/QUOTE]For logo image,if it's not working with recovery,you have to flash your logo.img in Flash Tool.[/QUOTE]
While bootloop, i had done this. I flashed back the original logo.img, and after reboot i first see the original picture (this green monster...lol), then starts your bootanimation (like a video) with your music and starts again and again and again......
I hope you understand me/all of this, my english is not so good (Germany).
catdoggy said:
No, and as i said, with the rooted stock Rom installed, the backup can be flashed back without any errors....
Ok,i really don't know why is this happening.I installed it in my phone and restore my original backup and i don't have any problem(like boot-loop).Anyway,if your phone is working now with your original rom,wait for the one i will make for 991D.
P.S: For changing the bootanimation,you have to install Root Explorer then acces your system files like this: select "system" file -> "media" -> "bootanimation".There you have to find your original bootanimation.Copy it into your pc,unzip it and check the images you find in file1 and file 2.If it's not your original bootanimation,search it into "custpack" file -> JRD_custres -> "media".Make the same thing like with the other one.If this is your original one,replace the one you have into "system" file with the one you've found in custpack.
Let me know if you succeded.
Click to expand...
Click to collapse
Gradu2012 said:
P.S: For changing the bootanimation,you have to install Root Explorer then acces your system files like this: select "system" file -> "media" -> "bootanimation".There you have to find your original bootanimation.Copy it into your pc,unzip it and check the images you find in file1 and file 2.If it's not your original bootanimation,search it into "custpack" file -> JRD_custres -> "media".Make the same thing like with the other one.If this is your original one,replace the one you have into "system" file with the one you've found in custpack.
Let me know if you succeded.
Click to expand...
Click to collapse
Yes, my great master, I succeded. Yes, I tried it although I spend hours again to restore first the Alcatel original and then my backup :crying:
BUT its advantage is that I now know a trick to speed up the Alcatel Upgrade: This tool downloads directly from the Alcatel server, every time. So i was looking into OTA Dir and there was a "dowwnload" folder...but empty. Ok, i thought, the files were deleted after recovery. So i made a cup of coffee and do the upgrade procedure again and afterr the download, but before flashing, i copied the download folder to another place. :highfive:
And NOW i only need to copy the saved ffiles into OTA dowwnload directory and the tool is upgrading in about 5 minutes, not in 1-2 hours..jeeeeehaaaa
Ok, and now it´s your turn, i have a brain twister for you. The OTA is downloading 10.100 ".bin" files !!!! (yes, ten thousand and one hundred). Are YOU capable to make sweet two zip files (as by your ROM) with these original bin´s, that would make it very easy to recover. Or is there onother way (maybe for me, too) to make these 2 zip files from my running system or my backup??
:good:
CM 10 baseband fix:
GSM is completely working
Buttery Smooth
Easy Installation
Download link in the attached text file
Installation
(1)Flash the boot image from the zip
(2)Go to recovery first blue LED is for TWR after a while green LED is for CWM choose any one
(3)Go to mounts and storage , in TWR mount
(4)Mount system,data,cache
(5)Format system,data,cache in TWR wipe-advanced wipe select system,data,cache and wipe it
(6)Re-mount system,data,cache
(7)Install zip from the location you copied it
(8)Install Gapps and Reboot
For first time it will take a bit time finish the setup and done....................
New Update Released V2
Changelog
Video camera is now working with an 3rd Party app and it will be Integrated Very soon I found the app searching Google Playstore For something and I tried it It worked
Happy New Year
Link for Update In the Updated text File
Mere Updates will be released soon
[email protected] said:
CM 10 baseband fix:
GSM is completely working
Buttery Smooth
Easy Installation
Download link in the attached text file
Installation
(1)Flash the boot image from the zip
(2)Go to recovery first blue LED is for TWR after a while green LED is for CWM choose any one
(3)Go to mounts and storage , in TWR mount
(4)Mount system,data,cache
(5)Format system,data,cache in TWR wipe-advanced wipe select system,data,cache and wipe it
(6)Re-mount system,data,cache
(7)Install zip from the location you copied it
(8)Install Gapps and Reboot
For first time it will take a bit time finish the setup and done....................
Click to expand...
Click to collapse
Hey dude the link doesn't open i dunno why could you plzz mirror it
Bro the link is absolutely fine try to change http:// to https://
I recommend not to flash another kernel as it may result no baseband
does this works and for e dual?
Works fine till now, let's see how long this lasts. CM10's one awesome ROM, though - I liked it a lot before I started getting the GSM bug before. Thanks for this!
Where'd you get the ZIP?
Xperia E ds users I will upload CM10 today but I don't know it works or not ........
CM10 baseband fixed users do not set brightness modes in settings system notification drawer widget buttons other wise it won't open again
[email protected] said:
CM10 baseband fixed users do not set brightness modes in settings system notification drawer widget buttons other wise it won't open again
Click to expand...
Click to collapse
Dude its odexed the cm10 we have is deodexed i dont think it will work with me
Bro I am talking about the CM10 I Uploaded
How did you make gsm working?
Deodexed version is coming very soon
delete
Can you port in for Miro or tell how you make GSM works?
[email protected] said:
Bro I am talking about the CM10 I Uploaded
Click to expand...
Click to collapse
You mean to say this is a standalone rom and not just a fix??
It's a fix
[email protected] said:
It's a fix
Click to expand...
Click to collapse
So that means it will be flashed once i flash the main cm10 rom right?
GSM, once again, mysteriously stopped working. No go, guys.
doperthancoke said:
Does charging stop working as well?
Sent from my C1605 using XDA Free mobile app
Click to expand...
Click to collapse
Yep, stopped.
NSDCars5 said:
Yep, stopped.
Click to expand...
Click to collapse
Strange. I've rebooted a million times, install GLTools (which killed Xboost), some themes and mods, and gsm is still working.
In your case, should wipe system, cache ,dalvik (keep data) and reflash.
Oh, do not install any framework.jar and framework-res mods.
sasiskas 5.0.1 ROM for Galaxy S4 DUOS I9502
First of all, let me tell you the story and the philosophy behind this ROM.
The story: One month ago I bought an I9502 because it was the best dual sim phone for it's price. Unfortunately it is oriented for the Chinese market so it is full of Chinese customizations and apps. And since there are no International-oriented custom lollipop roms available, I decided to create one by my own.
The philosophy: The rom is based on my personal preferences, I just share it because why not! Since I am not a samsung software fan, I removed almost every samsung bloatware. And Obviously removed all the chinese crap and customized everything I could in order to make the rom more international.
The ROM is based on a the latest I9502ZNUJOC3 firmware. In order to save some time I found the official ROM Deodexed from romzj.com and customized it to my personal taste.
CUSTOMIZATIONS
Deodexed (by romzj)
Busyboxed (by romzj)
Rooted (by romzj)
Replaced Boot animation from China Unicom to Samsung
Removed almost all Samsung apps
Removed all Chinese apps
Added Google apps
Xposed
Camera shutter sound on/off
Added advanced power menu
3minitBattery
Network Stats On status bar (settings->connections->more networks->Network Traffic)
Removed Baidu location consent
Replaced location service from baidu to google
Removed SIM icon from status bar in order to save some space
Removed Sfinder and Quick connect from Pull down menu
In SMS app, replaced sharing location from mo.maps.com to google maps
Replaced Chinese keyboard with multilingual S6 Keyboard (all languages available)
Replaced file manager with S6 file manager
Added optical reader from S6
Added weather from S6
Added KidsMode from S6
Removed Chinese search engines from stock browser
Maybe something else that I don't remember
All languages are supported.
Modified SMS/MMS app, Replaced sharing location feature from chinese maps to google maps
Removed Airplane mode confirmation dialog
Added Application Permission option (app ops) in settings->more->security
KNOWN ISSUES
If you go to "settings->security->sim change alert" the settings app will crash. Generally some items in settings menu are not working because they are linked to Samsung Account, this happens because I removed Samsung Account, I left the settings there in case someone wants to reinstall Samsung Account.
After boot, Touchwiz might crash one time. I'm not sure what causes this issue, but I don't mind since I use Nova Launcher. If you want you can help me find the source of the problem. Fixed in version 1.1
Messaging app crashes Fixed in version 1.2
Contacts not recognized in messages or when receiving a call. Fix according to your country.
Generally the rom is VERY stable, and I have no issues so far.. (I use it since July 2015)
CHANGELOG
Version 1.1
-It is now, uncompressed because compression caused issues with TWRP
-Fixed TouchWiz crash, due to video widget
-Fixed fonts of weather widget
-Fixed shadows of weather widgets
Version 1.2
-Fixed Messaging app crash
-ROM is now multilanguage
-Update xposed version to v65
-Added KidsMode from S6
Version 1.3
-Added support for Xposed Uninstaller (For thos who like to Uninstall/Update Xposed)
-Added "Adapt Audio" feature
-Added Print Spooler (support for wifi printing)
-Modified SMS/MMS app, Replaced sharing location feature from chinese maps to google maps
-Added S6 Launcher
-Removed Airplane mode confirmation dialog
-Added Application Permission option (app ops) in settings->more->security
-Fixed sharing media over wifi
-Some more fixes
Version 2.0
-It includes all changes from V1.3
-Updated Kernel (I9502ZNUJOF1) (did not update to latest version I9502CHUIOH2 because it causes problems with my ROM)
-Updated Modem to latest version (I9502CHUIOH2)
-Updated photo edit tool[/URL]
-Translated USIM apps
-Improved translations
-Updated 3Minit battery to latest Version (the app will automatically install only on fresh ROM installs, in any other case you have to manually locate it and install it from system/preload/3minitBatterySettings)
-Some more fixes
DOWNLOAD LINK
SASISKAS ROM V1.2
SASISKAS ROM V1.3 - INSTALL AS AN UPDATE
SASISKAS ROM V2.0 - INSTALL AS AN UPDATE
INSTRUCTIONS
If you don't have custom recovery, flash TWRP using Odin 3.0.9 (Helpful video HERE)
Make a complete Backup, I'm not responsible if you brick your phone. ( Power off your phone, then press and hold Volume Up, Home and Power buttons simultaneously, then go to "Backup", tick all the check boxes , and select backup)
If you don't have Lollipop already installed, flash Bootloader using Odin (Helpful video HERE)
Unrar my ROM and move the folder "sasiskasROM_I9502_Lollipop" to your SDcard, in folder "TWRP/Backups/****** (make a random backup using TWRP and the folder ****** will be generated)"
Wipe data&cache (from custom recovery->wipe->swipe to factory reset),
Also wipe system (from custom recovery->wipe->advanced wipe-> check only Sytem->swipe to wipe)
From custom recovery, go to "Restore", find my rom in your SDcard and select restore
If for any reason you fail, then follow these instructions (MUST WORK 100%):
Download official I9502ZNUJOC3 firmware from sammobile
Flash it using Odin (Helpful video HERE)
Boot normally to official stock rom
Unrar my ROM and move the folder "sasiskasROM_I9502_Lollipop" to your SDcard, in folder "TWRP/Backups/****** (make a random backup using TWRP and the folder ****** will be generated)"
Wipe data&cache (from custom recovery->wipe->swipe to factory reset),
Also wipe system (from custom recovery->wipe->advanced wipe-> check only Sytem->swipe to wipe)
From custom recovery, go to "Restore", find my rom in your SDcard and select restore
If you like my ROM just hit the "THANKS!" button, to show me that the project is still alive, so I keep releasing new versions.
I assume that this ROM can't be used in the i9500?
rossarnie said:
I assume that this ROM can't be used in the i9500?
Click to expand...
Click to collapse
I'm not sure. I have heard of people using i9500 roms on i9502 devices, but never heard of someone using i9502 rom on a i9500 device.
Doesn't work
it doesn't work ....... i tried it with TWRP and try the buckup in the Recovery .... evrything goes well but after restarting Phone nothing happen ...... just Black screen
did you flash the bootloader?
also wiped data&cache?
also wiped system?
If you already tried these. Then do the following. (MUST WORK 100%)
1. Download official I9502ZNUJOC3 firmware from sammobile http://www.sammobile.com/firmwares/download/44922/I9502ZNUJOC3_I9502CHUJOC3_CHU/
2. Flash it using Odin (Helpful video here: https://www.youtube.com/watch?v=Ulz-1UYzHBA)
3. Boot normally to official stock rom
3. Go to recovery, wiped data&cache, then also wiped system.
4. Recover my ROM as a backup from your SDcard
Do u have a cwm/twrp recovery for i9502 lollipop?? I cant install gapps on my device .
Parsicoola said:
Do u have a cwm/twrp recovery for i9502 lollipop?? I cant install gapps on my device .
Click to expand...
Click to collapse
Flash it using ODIN 3.0.9
sasiskas said:
Flash it using ODIN 3.0.9
Click to expand...
Click to collapse
tnx bro .. but i have 2.8.7.0 of this twrp recovery ... and tried too and didnt work !!! I use stock rom and i want to install gapps on my 5.0.1 (latest stock frimware downloaded from sammobile) . i flashed gapps with orignal recovery and twrp ... and all gapps package! neither didnt work tooo! but gapps minimal edition installed! but didnt work play store .
do u hav any solution?
Parsicoola said:
tnx bro .. but i have 2.8.7.0 of this twrp recovery ... and tried too and didnt work !!! I use stock rom and i want to install gapps on my 5.0.1 (latest stock frimware downloaded from sammobile) . i flashed gapps with orignal recovery and twrp ... and all gapps package! neither didnt work tooo! but gapps minimal edition installed! but didnt work play store .
do u hav any solution?
Click to expand...
Click to collapse
You can't because you dont have enough free space.
You must flash stock ROM, then root, then remove as many Chinese and Samsung apps as possible, then install "Gapps 5.0.x PICO" .
Pico is the smallest version of Gapps ( including only basics google apps) , but it is ok, you can install any google app you like, later from google play store.
Hello
Im about to flash this rom. Just making sure i have everything in order and prepared.
I have 9502 with BB I9502ZNUGNK2. I have downloaded your sasiskasrom also twrp tar and bootloader for lolipop.
Do i need anything else.?
Also i had s2 s3 and s4 before i know my way around odin but this chinese thing is makeing me nervous.
Can you provide step by step please how to flash this.
Will dual sim work after?
Thanks in advance
zloduheg said:
Hello
Im about to flash this rom. Just making sure i have everything in order and prepared.
I have 9502 with BB I9502ZNUGNK2. I have downloaded your sasiskasrom also twrp tar and bootloader for lolipop.
Do i need anything else.?
Also i had s2 s3 and s4 before i know my way around odin but this chinese thing is makeing me nervous.
Can you provide step by step please how to flash this.
Will dual sim work after?
Thanks in advance
Click to expand...
Click to collapse
If you don't have custom recovery, flash TWRP using Odin 3.0.9 (instructions HERE)
Make a complete Backup, I'm not responsible if you brick your phone. ( Power off your phone, then press and hold Volume Up, Home and Power buttons simultaneously, then go to "Backup", tick all the check boxes , and select backup)
If you don't have Lollipop already installed, flash Bootloader using Odin (instructions HERE)
Unrar my ROM and move the folder "sasiskasROM_I9502_Lollipop_V1" to your SDcard.
Wipe data&cache (from custom recovery->wipe->swipe to factory reset),
Also wipe system (from custom recovery->wipe->advanced wipe-> check only Sytem->swipe to wipe)
From custom recovery, go to "Restore", find my rom in your SDcard and select restore
If for any reason you fail, then follow these instructions (MUST WORK 100%):
Download official I9502ZNUJOC3 firmware from sammobile http://www.sammobile.com/firmwares/d...02CHUJOC3_CHU/
Flash it using Odin (Helpful video HERE)
Boot normally to official stock rom
Go to recovery, wiped data&cache,
Then also wiped system.
Recover my ROM as a backup from your SDcard
Dual sim works 100%
sasiskas said:
You can't because you dont have enough free space.
You must flash stock ROM, then root, then remove as many Chinese and Samsung apps as possible, then install "Gapps 5.0.x PICO" .
Pico is the smallest version of Gapps ( including only basics google apps) , but it is ok, you can install any google app you like, later from google play store.
Click to expand...
Click to collapse
tnx bro .. i did what u said .. and u r my hero now man!! :good::good::good::good::highfive::highfive:
thanks alot ..
Parsicoola said:
tnx bro .. i did what u said .. and u r my hero now man!! :good::good::good::good::highfive::highfive:
thanks alot ..
Click to expand...
Click to collapse
You are welcome
It is strange when i unpack your rom on my SD twrp is not seeing it as a backup.
I had to make a backup and then delete everyting from that folder then put your files inside and only then i can do a restore, but restore fails.
I will try once more. I follow your instructions to the letter but for some reason it is not working for me.
zloduheg said:
It is strange when i unpack your rom on my SD twrp is not seeing it as a backup.
Click to expand...
Click to collapse
That happens because TWRP sees only the content of TWRP folder that is generated inside your SDcard. I should have mention that but I forgot.
zloduheg said:
I had to make a backup and then delete everyting from that folder then put your files inside and only then i can do a restore, but restore fails.
Click to expand...
Click to collapse
What message do you receive when it fails?
zloduheg said:
I will try once more. I follow your instructions to the letter but for some reason it is not working for me.
Click to expand...
Click to collapse
Did you try the second method I described? it should work.
Sorry for the trouble but I don't have a second device to try it, and on my device it works fine.
Awaiting your feedback
Ok first because i didn't had lollipop flashed only bootloader and twrp after. When i tried to restore twrp didn't see your folder so i made a small backup first and i then deleted it and moved your files into that folder. Twrp then saw the files and it restored boot, preload but when it starts to restore system it has some strange progression, it starts from 0MB to 172836928327MB and it is always on 0% no matter how much MB it restores, it reaches around 1500MB then it reports Failure. I will try again and will post the log.
Also when it failed first time i have downloaded full rom from your post, i have updated the phone, it boots normally. Same china baidu crap all over it. I again flashed twrp and repeated the procedure.
Wipe data / cache. Wipe system and i try restore but it fail again.
zloduheg said:
Ok first because i didn't had lollipop flashed only bootloader and twrp after. When i tried to restore twrp didn't see your folder so i made a small backup first and i then deleted it and moved your files into that folder. Twrp then saw the files and it restored boot, preload but when it starts to restore system it has some strange progression, it starts from 0MB to 172836928327MB and it is always on 0% no matter how much MB it restores, it reaches around 1500MB then it reports Failure. I will try again and will post the log.
Also when it failed first time i have downloaded full rom from your post, i have updated the phone, it boots normally. Same china baidu crap all over it. I again flashed twrp and repeated the procedure.
Wipe data / cache. Wipe system and i try restore but it fail again.
Click to expand...
Click to collapse
I juts tried it and it works fine for me.
I'm uploading a new Version V1.1. You should better try the new version.
This time it is complete backup, not just system
It is not compressed, maybe the compression was causing problems
Fixed some bugs from previous version
And I'm also trying to find a way to make my ROM as a flashable zip, for easier installation, but I have no idea how to do it at the moment.
can you confirme that more locale is working??
sasiskas said:
I juts tried it and it works fine for me.
I'm uploading a new Version V1.1. You should better try the new version.
This time it is complete backup, not just system
It is not compressed, maybe the compression was causing problems
Fixed some bugs from previous version
And I'm also trying to find a way to make my ROM as a flashable zip, for easier installation, but I have no idea how to do it at the moment.
Click to expand...
Click to collapse
can you confirme that more locale is working on these rom i need french lang???
thanks for the rom dev
addelll said:
can you confirme that more locale is working on these rom i need french lang???
thanks for the rom dev
Click to expand...
Click to collapse
Works but not everywhere. For example settings is still in English. I will fix this on version 1.2
Yes i confirm that . The rom is working perfectly also exposed ,thanks DEV.
Sent from my GT-I9502 using XDA Free mobile app
I’m presenting my 4th ported ROM Project Alice_Revolution 9.1.2 for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) Alice Project Team for the wonderful rom,
3) Dr. Avinash for Boot Logo,
4) Of course, me for Repartitioning Xolo Q3000 & Porting ROM. But, I need not to Thank myself as I know U will Like the rom & press the Thank Button,
I haven't take any permissions from you guys, I'm sorry for that, but your work is all credited to you, so, please forgive me.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded Alice_Revolution_p780.zip in sd card.
2) Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4) Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5) Install Alice_Revolution_p780.zip
6) Don't reboot system, Wipe Cache & Dalvik Cache & Press Home button.
7) Immediately, Install the Revolution_Port_Patch.zip
8) Again, Wipe Cache & Dalvik Cache.
9) Reboot System.
10) 1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo. If you stuck at Boot Logo, then go to recovery & flash the rom again).
11) 1st screen will show some error, related to android.provision. Don't panic, reboot and go to recovery by pressing volume up button.
12) Wipe cache & Dalvik cache.
13) Flash Rev_Patch.zip
14) Reboot your phone. Everything will be fixed.
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from Alice_Revolution working fine.
2) MX Player as default media player.
3) Xposed, GravityBox, Viper4android (Install as apk, manually) working fine.
4) SuperUser & BusyBox installed.
5) For full changelog, visit: http://alicerom.ru
Bugs:
1) WCDMA network signal reception is weak (Tried a lot, but couldn't fixed. Suggest, if anybody solved it).
2) Report, if you found any.
Download Links:
1) Alice_Revolution_ROM
2) Revolution_Port_Patch
3) Revolution_Patch
All the Best, Guys
Screenshots:
Click For Screenshots
Updates:
1) Revolution_9.0.1
2) Revolution_9.1.2
Bug Fixes:
Great work
actually this rom i wanted to post way before.
Just go for 9.1.2 directly.
Here is the link.
avi3230 said:
Great work
actually this rom i wanted to post way before.
Just go for 9.1.2 directly.
Here is the link.
Click to expand...
Click to collapse
Thank U @avi3230, but 9.1.2 is OTA. I'll try as you suggested. Thanks a lot, again.
sachin.r.fulzele said:
Thank U @avi3230, but 9.1.2 is OTA. I'll try as you suggested. Thanks a lot, again.
Click to expand...
Click to collapse
Incorporate OTA in final release.
It will be just updated apps, so just replace them.:good:
When it will be released waiting for it.....
Thanks @sachin.r.fulzele
For your great contribution & also Avi sir for all your support.
Vinay Patani said:
When it will be released waiting for it.....
Thanks @sachin.r.fulzele
For your great contribution & also Avi sir for all your support.
Click to expand...
Click to collapse
Facing coverage problem for wcdma......
sachin.r.fulzele said:
Facing coverage problem for wcdma......
Click to expand...
Click to collapse
Hope will be solved soon...
Waiting for it
Thanks for your great work
Hi bro waiting for rom...
When this rom will be available???
Vinay Patani said:
When this rom will be available???
Click to expand...
Click to collapse
ROM will b released tomorrow......
When this rom will be released???
Waiting since morning?
Vinay Patani said:
When this rom will be released???
Waiting since morning��
Click to expand...
Click to collapse
As promised, ROM is available for users. All the links are updated i.e. ROM, Scrrenshots as well as Updates.
Updates are working for our phone???
Vinay Patani said:
Updates are working for our phone???
Click to expand...
Click to collapse
If they weren't working, I wouldn't posted them
How to flash this updates
mujaid714 said:
How to flash this updates
Click to expand...
Click to collapse
Flash the update directly, no need to wipe cache/ dalvik
I am getting UI same as of stock not as in screenshot..what can the problem..I followed step as mentioned by u.