Like in title. Im using D2303
You can use AlsaMixer (of course, it needs root.)
I tried this on LP and %100 working for both speaker and headphones.
1-) Install AlsaMixer
2-) Install busybox
3-) Open AlsaMixer and open settings.
4-) Switch mod to ''alsa_amixer controls''
5-) Search for RX1
6-) Tap to RX1 Digital Volume and enter 100 to box
7-) Click apply
Now search for RX2 and do same thing to this
9-) Enjoy
Related
https://drive.google.com/file/d/0B39MStD8CDnVM2NQaEoyTnhtbGs/view?usp=docslist_api
Hey guys above is the Google drive link for official ota update for our Lenovo a6000 plus 1024mb
I had rooted Lenovo a6000 plus to install the viper4android fx equalizer did not install any custom rom
Rooted using superuser app using adb and successfully unrooted using the native superuser full unroot option. Still I was scared that the ota might brick my phone, but no it didn't brick my phone. I heard people bricked their phones using the kingroot app.
Place the zip file into sdcard0/lenovoota/
And press on the new found firmware and click update now
If this method doesn't work do it manually
Goto about/software updates
1. Click on the leftmost capacitive button
2. Click on toolkit
3.Then click on the first option install update from sdcard by a zip file
4. It will reboot the phone into recovery and ask you to select the zip file
*In the recovery Use Vol up and down to navigate ; Power button to select*
5. select the zip file and then select yes
6. sit back and relax ,wait for 10 to 15 mins
7. After update it is recommended that you apply a factory reset.
http://snappydevelopers.blogspot.in/2015/09/lenovo-a6000-plus-stock-lolipop-rom.html
My review:
https://youtu.be/EVMmETp1_Ec
Changes:
1. Camera is very well caliberated and optimized to capture good images makes the camera more optimized with less grains and no over exposure of flash
kitkat vs lolipop camera samples: http://snappydevelopers.blogspot.in/2015/09/lenovo-a6000-plus-kitkat-vs-lolipop.html
2. Battery saver which can boost your battery upto 90 mins more
3. Material design
4. 3d multitasking tray which is always helpful.
5. lockscreen notifications and float notifications and caller float notification
Bugs solved after a factory reset:
1. WhatsApp contacts not displayed
2. play store 64 bit error
Bugs: https://youtu.be/QHvGJkyblfo
1. Third party apps cannot write to the external sdcard
*The default apps can write to external sdcard*
2. default launcher pops up after every reboot
3. after unplugging the headphones the ringer volume is turned low
4. The mx player when headphones plugged in and volume increased above 10% it quits the app.
5. All four cores are running continuously which drains the battery faster but the phone still can manage to give a backup of 1 days on moderate-heavy usage and 1.5 days on low-moderate usage
6. No multiuser support
7. Estimated charging time not displayed on the lockscreen
8.One more bug which I noticed recently is that some facebook videos won't run
Hope Lenovo will fix these bugs soon
Those who bricked their Lenovo a6000 phones by rooting follow this link
*note: Not for a6000 plus*
https://boycracked.wordpress.com/2015/06/03/unbrick-lenovo-a6000/
[Solution] To fix Bug 4 ( MX Player Closing automatically at sound level above 10)
Just found a simple solution to fix Bug 4...
Go to the Settings of MX Player -> Audio and make sure System Volume is unchecked...
Hope this helps..
You can then increase the system volume as much as you want with the volume buttons on the right side of your phone...
Hi guys,
I've followed the extended installation instructions for XTREMEMusic:
Have permissive kernel ( [check] )
SuperSU System-Mode; disable mount namespace separation [check]
install BusyBox (as suggested by Viper4Android during installation)
install XTREMEMusic (or Viper4Android) [check]
But whether I installed Viper4Android or XTREMEMusic,
both have no effect,
AudioFX also appears to have no effect - so this indicates a ROM-side issue, which needs to be fixed/worked around yet
Have you observed anything similar on other devices or ROMs ?
Thanks !
Hi. I had same experience on z3 when using viper4android. Could "use" the mod, but could not notice any change in output sound. Never found any solution ?
Sent from my E6653 using Tapatalk
I would like to share to you a sound setup that would improve the sound quality of your device to your preferences. This is a bunch of guides I searched in XDA forums and tested them with my PAC-ROM KK RC-3 setup. Though it is a software-level modification, I found the end result quite pleasing.
Disclaimer:
I am not responsible for any damage that this may cause you. As a golden rule, make sure you to run a full backup of your current setup in case something goes wrong with the process. I have only tested this in my device (model: S7562). Do follow the instructions extensively.
Pre-requisite:
~An android 4.4.4 Custom ROM
~Latest TWRP custom recovery built
~With root and Busybox installed
Instructions:
1.) Download and flash the 4.4.x Viper4android driver found here.
2.) Run this current Viper4android app. That should prompt a driver installation dialog box. Proceed installing it and choose what ever mode.
3.) Download and install the latest Viper4android apk. (currently using 2.5.0.5).
4.) Run this latest Viper4android app in order to update the driver to the latest.
5.) You can now disable the old Viper4android app (the one with the violet icon).
6.) Setup the Viper4android the way you like it, and also use a music player that integrates an equalizer (like Phonography or Spotify) and your good to go.
Current headset profile (got it from this):
Master power - on
Playback gain control - off
FET compressor - off
Viper DDC - on, set to sennheiser hd558
Spectrum extension - on, set to 1.0
Firequalizer - off
Convolver - on, set to Samsung soundalive tubeamp(included in the IRS samples)
Differential surround, field surround, headphone surround+, reverberation - all set to off
Dynamic system - off
Viper bass - off
Viper clarity - off
Tube sound simulator - off
AnalogX - on, set to extreme
Rest all are turned off or kept the default.
Links:
Viper4android driver: https://forum.xda-developers.com/oneplus-one/themes-apps/app-viper4android-v2-3-4-0-t3040014
Latest Viper4android apk: https://forum.xda-developers.com/showthread.php?t=2191223
IRS Samples: https://forum.xda-developers.com/attachment.php?attachmentid=4133893&d=1493617480
Thanks to @ScreaMySkrillEX , @gianton , @pavlepiramida, @zhuhang
RRR
Really appreciate the credits!
Thanks.....
ScreaMySkrillEX
Hi there,
I was installing Viper4Android on my GT-I9505 and came across this error about the LPA (low power audio). I then clicked ok but nothing really happened. My Viper then didn't work on the settings I wanted them to so I had look and fixed it here's how:
1. Download a build.prop editor from the play store e.g.(JRummy's BuildProp Editor)
2. Go/Serch for this line: Ipa.decode and lpa.use-stagefright
3. Change them to false.
4. Reinstall your drivers
5. DONE. ENJOYYY
Tested on i9500/i9505/i9505i/i9506
Please hit the thanks button if I helped
hi,
This is a full guide on installing the best sound mods and get a flagship grade audio performance in android 10
I'm not a developer. all credits goes to the developers of ainur audio and viper4android.
please hit thanks if I helped.
1- Uninstall all of your existing audio mods
2- make sure that the kernel is permissive to avoid any issue, if not, make this step:
just put the following inside a file ( you can name it whatever, say "selinux", doesn't even need an extension), place it in /data/adb/service.d, give it execution permission and that's it:
#!/system/bin/sh
setenforce 0
That'll change to permissive at each boot.
3-Install audio mods from Magisk in this exact order:
a- Ainur Sauron Then reboot to TWRP recovery and mount all partitions
then go to /data/ADB/modules/ Ainur SAURON > delete services.sh to avoid boot loops then reboot to system,
b- install Viper4Android and don't open it then reboot the system and open Viper4android, install drivers then reboot to recovery,
mount everything and go to the file manager, copy the file post-fs-data.sh to /data/ADB/modules/viper4android then reboot system,
c- install Audio Mod Library (AML), reboot.
4- open viper4android and apply these settings to enjoy a great sound quality from my experience:
speaker > enable master limiter > enable playback gain control and modify the output threshold value to 0.
Headset > enable master limiter > enable playback gain control and modify the output threshold value to 0,
> enable FIR equalizer and use these values: 3.5 - 6.0 - 3.0 - 0.0 -0.0 - 0.0 - 0.0 - 0.0 - 0.0 - -0.5
> enable convolver and put the attached file Htc Beats Audio in the kernel folder inside viper4android folder > select impulse response and select HTC Beats Audio file in kernel folder > cross channel 25%.
> enable headphone surround+ level 2 > enable dynamic system only without modifications of the vlaues under it.
> enable viper bass, bass mod: natural bass - bass frequency: 80HZ - Bass gain: 10dB
> enable viper clarity , Clarity mode: natural - clarity gain 8dB.
For Bluetooth and USB, apply the same headset settings.
Enjoy the quality sound and hit thanks :laugh:
Not work but I found my ways
Using android Q
Series of the nightfall said:
Not work but I found my ways
Using android Q
Click to expand...
Click to collapse
May I ask, what are your ways?
It's not working for me.
I understand if it's complicated or tedious, but if it's a few simple steps I would be delighted to learn from you and try my luck a few more times...