Database Info

[Q] Bricked s3 SSN I93000GSMH

have a problem with my bricked s3. upgraded to official jellybean but was unhappy that sky go wouldnt work so decided to downgrade back to ics.
found out i have put a wrong carrier firmware on the phone as it dosent get past the boot screen. scoured to find a 3 network ics firmware put on phone using odin i have done this odin passed it and it still sticks on the samsung boot screen. i figure now i need a firmware which corresponds to ssn: I9300GSMH can anyone help me figure what i need to do. Big noob but i can learn PLEASE HELP ME

calliburistic said:
have a problem with my bricked s3. upgraded to official jellybean but was unhappy that sky go wouldnt work so decided to downgrade back to ics.
found out i have put a wrong carrier firmware on the phone as it dosent get past the boot screen. scoured to find a 3 network ics firmware put on phone using odin i have done this odin passed it and it still sticks on the samsung boot screen. i figure now i need a firmware which corresponds to ssn: I9300GSMH can anyone help me figure what i need to do. Big noob but i can learn PLEASE HELP ME
Click to expand...
Click to collapse
you are in wrong thread this is the forum were you should post your problem http://forum.xda-developers.com/forumdisplay.php?f=1563

[Completed] [Q] After boot and samsung logo black screen. S3 SGH-I747M Kodoo Canada

I'm out of Ideas, please help me.
Here is my info:
Samsung galaxy s3 sgh-i747m from kodoo Canada. I had installed cyanogenmod through their installer over a year ago. I have been using it with my rogers sim with no problems. Less than 2 weeks ago my screen randomly goes black. I try pulling the battery. The samsung logo appears but then back to black but I can hear everything is working. I Try and boot into recovery and everything is black. I boot into download mode and everything looks fine. I try reinstalling cyanogenmod and then Samsung stock through kies and smart switch and every stock kodoo file I can find .
There is one of two things that happen.
If I install a stock below 4.4.2 I get fail in Odin 3.07 and this on download mode:
Odin Mode
Product Name: SGH-I747M
Current Binary: Samsung Official
System Status: Official
Qualcomm secureboot: Enable
Warranty Bit: 1
Bootloader AP SWREV: 2
SW REV Check Fail : Fused 2 Binary 1
If I install a stock rom with 4.4.2 or install from Smart Switch
Everything proceeds perfectly but upon reset I see the samsung logo and then nothing just a black screen with the chime in the background. Still can't boot into recovery. I only see the recovery in blue in the upper left corner but then nothing.
I would greatly appreciate any help you can give me.

Hi there,
All you need is here:
[STICKY INDEX] AT&T GS III - I747 {/Root/ROMsTools}
[HOW TO GUIDE] How To Unbrick AT&T I747 and I747M After 4.3 OTA
For questions please use this forum: AT&T Galaxy S III Q&A, Help & Troubleshooting
Good luck

Thanks for the reply R_a_z_v_a_n.
The [HOW TO GUIDE] How To Unbrick AT&T I747 and I747M After 4.3 OTA states from the beggining: thus far this method will not work for any of your 4.4.2 ota bricks if you flashed the 4.4.2 modem on the mjb bootloader, the only way to fix those bricks is with a new emmc, motherboard or a new phone. Jtag won't save you this time the phone is now a glorious paperweight.
I believe I'm on 4.4.2. because those are the only roms I am able to successfully install but then of course the screen goes black. So if that is the case, does it mean my phone is done? just a paperweight as the article says?
I'm wondering if I should try anyways or is there a sure way to get my phone running from 4.4.2.?
Thanks for the help, look forward to your answer.

sparaminpied said:
I'm wondering if I should try anyways or is there a sure way to get my phone running from 4.4.2.?
Click to expand...
Click to collapse
Hi again,
You'd be best served asking for help from the experts who own your device in the thread for Q&A I gave you link above, see bellow posted again:
AT&T Galaxy S III Q&A, Help & Troubleshooting
Have a good day

[Completed] Help changing ROM on Samsung Note 3 SM-N900V from Verizon

I have a Samsung Galaxy Note 3 SM-N900V from Verizon and I have been trying to change it to the DarkLord ROM that is a Modded Mix between Note 7 & Edge ROM.
I at first had problems rooting the phone with Odin (it always failed) so I search and search and found a tool called ArabicTool which took care of it and finally I rooted my phone, after that I tried adding TWRP so I could change the ROM but every time I added the recovery tool I got the message saying that the “System software not authorized by Verizon Wireless has been found on your phone” and then had to do an emergency restoration using Kies3 and the cycle began again with other methods but always the same result.
I would like to know if anyone has a way to change the ROM on a SM-N900V from Verizon, I have seem some guides that claim the process works with the SM-N900V but every time I try to do them I get the message of software not authorized when I install the recovery app TWRP and then I have to do an emergency restore in Kies3.
Please help anyone it would be really appreciated.

anrabaro said:
I have a Samsung Galaxy Note 3 SM-N900V from Verizon and I have been trying to change it to the DarkLord ROM that is a Modded Mix between Note 7 & Edge ROM.
I at first had problems rooting the phone with Odin (it always failed) so I search and search and found a tool called ArabicTool which took care of it and finally I rooted my phone, after that I tried adding TWRP so I could change the ROM but every time I added the recovery tool I got the message saying that the “System software not authorized by Verizon Wireless has been found on your phone” and then had to do an emergency restoration using Kies3 and the cycle began again with other methods but always the same result.
I would like to know if anyone has a way to change the ROM on a SM-N900V from Verizon, I have seem some guides that claim the process works with the SM-N900V but every time I try to do them I get the message of software not authorized when I install the recovery app TWRP and then I have to do an emergency restore in Kies3.
Please help anyone it would be really appreciated.
Click to expand...
Click to collapse
Greetings and welcome to xda. I am not sure the rom you mentioned is compatible with your device and I think your bootloader may also be locked. This thread here
http://forum.xda-developers.com/showthread.php?t=2517610
should help you with a custom recovery and I found this rom which is a s7 port for your device
http://forum.xda-developers.com/ver...ent/rom-aryamod-port-s7edge-portv6-5-t3506144
Good Luck
Sawdoctor

This ROm
sawdoctor said:
Greetings and welcome to xda. I am not sure the rom you mentioned is compatible with your device and I think your bootloader may also be locked. This thread here
http://forum.xda-developers.com/showthread.php?t=2517610
should help you with a custom recovery and I found this rom which is a s7 port for your device
http://forum.xda-developers.com/ver...ent/rom-aryamod-port-s7edge-portv6-5-t3506144
Good Luck
Sawdoctor
Click to expand...
Click to collapse
This is teh ROM i was trying to use but the main problem I'm having is trying to install a recovery tool everytime I do the phone gets stock on the software not authorized screen.
How do I know if teh bootloader is locked and if it is is there a way i can unblocke it?
http://forum.xda-developers.com/galaxy-note-3/development/darklord-s7-edge-port-6-0-1-mm-t3382954

anrabaro said:
This is teh ROM i was trying to use but the main problem I'm having is trying to install a recovery tool everytime I do the phone gets stock on the software not authorized screen.
How do I know if teh bootloader is locked and if it is is there a way i can unblocke it?
http://forum.xda-developers.com/galaxy-note-3/development/darklord-s7-edge-port-6-0-1-mm-t3382954
Click to expand...
Click to collapse
That rom may not be compatible with your device, the verizon variant is different to the other note 3's. I'm pretty sure the verizon note 3 is locked bootloader but if you ask your questions here
http://forum.xda-developers.com/verizon-galaxy-note-3/help
the experts there will be able to confirm this for you
Good Luck
Sawdoctor

Finally found how to install the ROM
So I finally found the solution on how to change the ROM on my SM-900V Verizon Wireless Note 3.
>>>>1) First Step How to Root the phone:
Activate USB debugging, download ArabicTool.exe.
I follow this youtube Vid to do it:
https://www.youtube.com/watch?v=GtuOPhSlymg
>>>>2) Unblock boot loader:
I follow this link:
http://forum.xda-developers.com/ver...l/official-note-3-verizon-bootloader-t3359370
>>>>3) Install TWRP (Using Flashly):
Download Flashly from the Android Play Store then download a recovery img using Flashly I picked TWRP.
>>>>4) Install the ROM:
I follow this link:
http://forum.xda-developers.com/galaxy-note-3/development/darklord-s7-edge-port-6-0-1-mm-t3382954
and
https://www.youtube.com/watch?v=-i6DsGKTsJc
So happy

[Completed] Help needed!!!!!

I have a Samsung Galaxy s6 G920A and I Tried to downgrade to 5.1.1 firmware. After flashing with odin it gets stuck at the Samsung boot screen. It will not enter recovery. I can only enter odin mode. I can only assume that marshmallow has locked in the bootloader so it cannot be downgraded. I recently found out you can unlock it but I do not have a way to as long as I cannot boot the phone. The only thing I can think of is to get a flashable, threw odin for the marshmallow firmware but I cannot find it online anywhere. If there is anyone who knows how to make one or has one already that can be uploaded, I would love to fix my softbricked phone.

Hi
This is the only thread I could find
http://forum.xda-developers.com/att-galaxy-s6/general/sm-g920a-stock-firmware-g920aucs4cpf1-t3430296
You can also browse the link below to see if theres more
http://forum.xda-developers.com/att-galaxy-s6/general
If you have further questions for your device, please post in your device Q&A
http://forum.xda-developers.com/att-galaxy-s6/help
Good luck and welcome to XDA

Thanks but did not work

chris62594 said:
Thanks but did not work
Click to expand...
Click to collapse
Try requesting for the file in your device Q&A which i posted earlier. Hopefully someone may have the file youre looking for

Help?

I dont know if i should post this here but here i go. Hey Guys i am very new to xda and very new to rooting. i recently rooted my galaxy s7 edge (sm-g935fd)
And my phone wasnt connecting to phone and i searched and they said to turn off usb debugging. and then i restarted my phone once and it said custom binary blocked by frp lock.
and since then i have been trying for almost three days and i am hopeless. I did factory reset by holding power and volume up and did not work
i tried using odin to upload a stock firmware but i get nand start and then fail.
i have tried a few post about how to fix nand but i cant understand it as it is not very clear
So please i really need help on how i can fix this
my device details
Samsung s7 edge (Says Duos on the back)
Model- SM-G935FD
Please help a brother out
oh and it says sw rev check bootloader failed when i use odin for new stock firmware

Saifu.jpg said:
I dont know if i should post this here but here i go. Hey Guys i am very new to xda and very new to rooting. i recently rooted my galaxy s7 edge (sm-g935fd)
And my phone wasnt connecting to phone and i searched and they said to turn off usb debugging. and then i restarted my phone once and it said custom binary blocked by frp lock.
and since then i have been trying for almost three days and i am hopeless. I did factory reset by holding power and volume up and did not work
i tried using odin to upload a stock firmware but i get nand start and then fail.
i have tried a few post about how to fix nand but i cant understand it as it is not very clear
So please i really need help on how i can fix this
my device details
Samsung s7 edge (Says Duos on the back)
Model- SM-G935FD
Please help a brother out
oh and it says sw rev check bootloader failed when i use odin for new stock firmware
Click to expand...
Click to collapse
The firmware that you are trying to flash is giving you the sw rev error because that firmware is an older/downgraded version than the version that is already on the phone. You have to flash the firmware that is the same as what is already on the device or a newer version, you can't flash an older version. Find the newest, most updated firmware that you can find for your specific model number.
Do a Google search for:
"Stock firmware for SM-G935FD"
Then find the newest available version that is made for your specific region/carrier.
Sent from my SM-S767VL using Tapatalk

Thank you. I shall try this let you know.