Related
Hi, I want to completely unroot my phone and restore it to factory settings. Recently I've been experiencing system random reboot and hang ups. I want to revert it back completely so that the warranty can still cover me if it goes down.
So from what I have searched so far, I have to reset the flash counter before I unroot, and then flash a stock version of the ROM using Odin? which will take care of the root
My question is how can I uninstall Clockwork recovery? And is it necessary to flash all the way back to the very first version of the ROM? I want to make sure it says official binary or official release channel(forgot what its called exactly) instead custom binary...
Thanks!
also, is it necessary to flash all the way back to the very first firmware and update my way back up? Or can i just flash the UVLH5 one that gave ICS?
im1knight said:
also, is it necessary to flash all the way back to the very first firmware and update my way back up? Or can i just flash the UVLH5 one that gave ICS?
Click to expand...
Click to collapse
Just flash the counter reset and then download the new UVMB1 firmware (if you want to have ICS) from samfirmware.com. Extract the tar.md5 file and flash it in ODIN (repartition will NOT check itself - I tested this today). No pit file required. Afterwards you will show reset counter as "No" and binary as "samsung official" in download mode.
I'm not for sure, but I don't remember when the last time I flashed the counter reset tool... and after flashing the UVMB1 my counter still said 'no'. Could be nothing... but I know I didn't do it today when I flashed...
anactoraaron said:
Just flash the counter reset and then download the new UVMB1 firmware (if you want to have ICS) from samfirmware.com. Extract the tar.md5 file and flash it in ODIN (repartition will NOT check itself - I tested this today). No pit file required. Afterwards you will show reset counter as "No" and binary as "samsung official" in download mode.
I'm not for sure, but I don't remember when the last time I flashed the counter reset tool... and after flashing the UVMB1 my counter still said 'no'. Could be nothing... but I know I didn't do it today when I flashed...
Click to expand...
Click to collapse
so will clockwork recovery also be removed when I flash the stock firmware..?if not how should I go about removing it?
It will probably be removed when flashing the stock firmware. Try it if not then come back and ask for help.
You guys think we can use the blaze pit from Eric's thread to reroot?
jbats said:
You guys think we can use the blaze pit from Eric's thread to reroot?
Click to expand...
Click to collapse
Looking at the big tar from samsung-update - I would say the rooting process should not need to change in the slightest. Truth be told I rooted ICS the same way I rooted GB... gotta love Samsung
All I tend to do is:
- Turn on USB Debugging
- Open Odin 1.85
- Get phone into download mode
- Flash Shabbys CWM tar file without rebooting
- Boot into recovery mode (holding power for a while works for me, then hold vol up and down - or just battery pull, put back in battery, then hold power-vol up-vol down)
- Flash Superuser or SuperSU (latter has been my choice as of late) zip
That's what I'll be doing to the wifes phone once she gets home anyway - though she's gone until pretty late... meaning I won't get to do anything until tomorrow night most likely. I'm pretty sure someone else will beat me to it (and by all means please do), but I was thinking I would put together a full odexed bloated zip, then maybe a deodexed one w/ root sort of thing? I'll maybe take a little and try to clear out carrieriq remnants (I don't think those have been active in quite a while really) as well...
Was there anything in particular people wanted?
theprogram1 said:
It will probably be removed when flashing the stock firmware. Try it if not then come back and ask for help.
Click to expand...
Click to collapse
Indeed it has been removed! Nice. But whenever I go into download mode, it still shows Odin, I'm not sure if this will still void the warranty...? But at least the Current Binary shows samsung official, and counter shows No. So that's good.
This looks stock right? It's been so long that I forgot what the phone info page is supposed to look like...
im1knight said:
Indeed it has been removed! Nice. But whenever I go into download mode, it still shows Odin, I'm not sure if this will still void the warranty...? But at least the Current Binary shows samsung official, and counter shows No. So that's good.
This looks stock right? It's been so long that I forgot what the phone info page is supposed to look like...
Click to expand...
Click to collapse
All you need it to say in download mode is "Flash Counter : No" and "Current Binary: Samsung Official" and you're set. It will always say odin mode since that's download mode by another name.
Yesterday I installed latest CM 10.2 to my p3110. Today I flashed auto tablet-ui patch. Now there comes cyanogenmod startup image but it doesn't pass it. When I try to shutdown the tablet it starts by itself. Weird thing is that connecting tablet to recharger stops the bootloop.
I cannot get to CWM but I can get to download mode. How I fix this? I assume I should flash new rom trough odin. Where I can get detailed instructions?
90mrsandman said:
Yesterday I installed latest CM 10.2 to my p3110. Today I flashed auto tablet-ui patch. Now there comes cyanogenmod startup image but it doesn't pass it. When I try to shutdown the tablet it starts by itself. Weird thing is that connecting tablet to recharger stops the bootloop.
I cannot get to CWM but I can get to download mode. How I fix this? I assume I should flash new rom trough odin. Where I can get detailed instructions?
Click to expand...
Click to collapse
that call whit soft brick...
it can be happen if u jump from rom whit custom kernel to other rom n use differend kernel whitout flash stock kernel first...
n the only way to make phone can use again flash stock rom by odin...
hire the link to back fia odin
http://forum.xda-developers.com/showthread.php?t=2283598
hit thanks if i help
Instructions said I should do factory reset or at least wipe cache, but I can't because I can't get to recovery.
You may have flashed wrong model tabletui patch in your tab.
If you can get into download mode then do this:
*Go to download mode (Power + Volume down)
*Install Odin (I recommend use v1.85)
*Download a Official Firmware zip for your tab.
*Connect your tab to Pc, then open Odin, and then Flash official zip using Odin.
You are done. Now you will be running Official Firmware from Samsung.
(Please Read instructions carefully while flashing, Good Luck) :thumbup:
Sent from my GT-P3100 using XDA Premium 4 mobile app
It worked. Now happily in stock 4.1.2. Thank you!
Hi guys, I'm having this issue with my 915G
I rooted the phone, but now I'd like to unroot it,
I tried trough superSu doing "unroot" options, reboot it in recovery mode and doing factory reset and wipe cache and than with Odin I reinstalled a latest firmware, but the still showing me that the phone status is custom and I can' get OTA because of that.
What am I doing wrong?
Cheers
No even one that could help me?
Can't believe it..
What recovery and kernel do you have? I think stock recovery and kernel, will solve the problem after unroot.
Sendt fra min SM-N915FY
ibizapower2003 said:
hi guys, i'm having this issue with my 915g
i rooted the phone, but now i'd like to unroot it,
i tried trough supersu doing "unroot" options, reboot it in recovery mode and doing factory reset and wipe cache and than with odin i reinstalled a latest firmware, but the still showing me that the phone status is custom and i can' get ota because of that.
What am i doing wrong?
Cheers
Click to expand...
Click to collapse
to unroot you Will have to flash the original firmware.which is available from sammobile website
Although old Triangle Away might still work through flashing a stock rom from a site like Sammobile should reset the flash counter and return the status back to official. Therese's no way to restore the the Knox counter though but that shouldn't affect the phone status.
I will try triangle away.
I already flashed the original firm but Sammobile, so now it's totally stock,recovery and kernel as well
Cheers
I can't use triangle away cause I already installed the original firm and the originale recovery,than I can't use it..
Sorry you do have to be rooted for it and to be honest I'm not sure if it will even help but... except for flashing the stock rom again I can't think of what else you could do without needing to root again to be able to fix it.
Hey everyone, so I have from what I researched here is a "soft" bricked phone as my recovery mode (TWRP) and download mode works fine but no boot.
First let me say this is the Canadian version of the Note 5 SM-N920W8. I posted here because there is no forum for that version everything seems to be the same and posted under 920T version.
HISTORY OF THE PHONE:
It was a while ago that I rooted but let me describe to the best of my memory how my note 5 ended up in the state that it is in. So stock was lollipop 5.1.1. I flashed the skyhigh kernel which gave root access but had random reeboot issues which led me to flashing TWRP recovery so I could flash boot.img as an image file which did take away the random reeboot problem and removed that red error on startup "kernel is not SEANDROID enforcing". Life was good at this point! Everything worked great woth no issues. I greenified everything and underclocked the cpu with system tuner and used system app removed to manually all the bloatware as I didnt want to start using custom roms I stuck with the stock firmware. Part of the reason that I didnt want to use custom roms is because I started reading up on xposed framework, so I decided to flash it and give it a try. I read the xposed framework thread followed the download link to my version downloaded it and flashed with TWRP. Immediately after this was a bootloop.
TROUBLESHOOTING:
Unfortunately I had no backup in TWRP.. In a panic before researching I started flashing other kernels like arters kernel and I think space x whcih can be used on some note 5s.. which brought back that SEANDROID error message in the bootloop. I flashed the skyhigh kernel but flashing the boot.img didn't get rid of that error message again.
A friend of mine at work recommended that I just wipe everything and flash the stock firmware from sammobile.com with odin since I still have recovery mode then just re root. So I went into TWRP and wiped EVERYTHING. I think there was 4 or 5 boxes in twrp data wipe but I selected all the boxes. Now the phone doesn't even get the Samsung logo on boot or anything but download mode works so I flashed twrp again which loads up. I downloaded my version of the Samsung firmware which was about 1.6gb from sammobile.com. I open odin load the file that I extracted. A tar.md5 file which took longer than normal to load into the AP but I didn't change any settings or anything. Should I have? Because after I hit start it failed. I retried at least 3 times. Does this firmware contain all the AP CP and all the other boxes or do I need to find those separately? Should I just try a custom rom?
Im not sure what to do here I have a completely blank phone but twrp and download mode works so it recoverable right?
I read up on adb sideloader but didn't get too far.. is that worth trying for recovery in this case?
I also read a few threads on here for other samsung versions where they say to flash a PIT file with odin but they all say that it only works specifically for that phone and I couldn't find one for this version of the note 5.
I know the #1 rule here is to research before posting and Ive really made my best attempt to research on here and Google over the last few days but I really need my phone back. Any help is greatly appreciated.
re: phone won't boot
bloewen4 said:
Hey everyone, so I have from what I researched here is a "soft" bricked phone as my recovery mode (TWRP) and download mode works fine but no boot.
First let me say this is the Canadian version of the Note 5 SM-N920W8. I posted here because there is no forum for that version everything seems to be the same and posted under 920T version.
HISTORY OF THE PHONE:
It was a while ago that I rooted but let me describe to the best of my memory how my note 5 ended up in the state that it is in. So stock was lollipop 5.1.1. I flashed the skyhigh kernel which gave root access but had random reeboot issues which led me to flashing TWRP recovery so I could flash boot.img as an image file which did take away the random reeboot problem and removed that red error on startup "kernel is not SEANDROID enforcing". Life was good at this point! Everything worked great woth no issues. I greenified everything and underclocked the cpu with system tuner and used system app removed to manually all the bloatware as I didnt want to start using custom roms I stuck with the stock firmware. Part of the reason that I didnt want to use custom roms is because I started reading up on xposed framework, so I decided to flash it and give it a try. I read the xposed framework thread followed the download link to my version downloaded it and flashed with TWRP. Immediately after this was a bootloop.
TROUBLESHOOTING:
Unfortunately I had no backup in TWRP.. In a panic before researching I started flashing other kernels like arters kernel and I think space x whcih can be used on some note 5s.. which brought back that SEANDROID error message in the bootloop. I flashed the skyhigh kernel but flashing the boot.img didn't get rid of that error message again.
A friend of mine at work recommended that I just wipe everything and flash the stock firmware from sammobile.com with odin since I still have recovery mode then just re root. So I went into TWRP and wiped EVERYTHING. I think there was 4 or 5 boxes in twrp data wipe but I selected all the boxes. Now the phone doesn't even get the Samsung logo on boot or anything but download mode works so I flashed twrp again which loads up. I downloaded my version of the Samsung firmware which was about 1.6gb from sammobile.com. I open odin load the file that I extracted. A tar.md5 file which took longer than normal to load into the AP but I didn't change any settings or anything. Should I have? Because after I hit start it failed. I retried at least 3 times. Does this firmware contain all the AP CP and all the other boxes or do I need to find those separately? Should I just try a custom rom?
Im not sure what to do here I have a completely blank phone but twrp and download mode works so it recoverable right?
I read up on adb sideloader but didn't get too far.. is that worth trying for recovery in this case?
I also read a few threads on here for other samsung versions where they say to flash a PIT file with odin but they all say that it only works specifically for that phone and I couldn't find one for this version of the note 5.
I know the #1 rule here is to research before posting and Ive really made my best attempt to research on here and Google over the last few days but I really need my phone back. Any help is greatly appreciated.
Click to expand...
Click to collapse
If you have either a custom or stock rom installed or the official Samsung firmware installed
then it should be an easy fix, you must have flashed a incompatible kernel or perhaps you
deleted the kerned. (the phone will not boot without a kernel)
You need to find a compatible kernel and flash it using twrp recovery.
Here is a link you may want to try, it's for kernels for the Note 5 only:
http://forum.xda-developers.com/tmobile-galaxy-note5/orig-development
It might even be better if you were to Odin flash a fresh copy of your Note 5 specific
firmware using download mode, that's the surest way to get your phone working again.
Give it a try...
Good luck,
Have a great day!
Good luck!
Hi thanks for the reply! I did try that already unless flashing a stock firmware is different than putting it in AP as I flashed the kernel. Do I need to select some different optioms in odin since I data wiped everything and need all the necessary files to boot the phone? Oh and I did put the skyhigh kernel back on.
A friend of mine at work recommended that I just wipe everything and flash the stock firmware from sammobile.com with odin since I still have recovery mode then just re root. So I went into TWRP and wiped EVERYTHING. I think there was 4 or 5 boxes in twrp data wipe but I selected all the boxes. Now the phone doesn't even get the Samsung logo on boot or anything but download mode works so I flashed twrp again which loads up. I downloaded my version of the Samsung firmware which was about 1.6gb from sammobile.com. I open odin load the file that I extracted. A tar.md5 file which took longer than normal to load into the AP but I didn't change any settings or anything. Should I have? Because after I hit start it failed. I retried at least 3 times. Does this firmware contain all the AP CP and all the other boxes or do I need to find those separately? Should I just try a custom rom?
Click to expand...
Click to collapse
Unfortunately I had no backup in TWRP.. In a panic before researching I started flashing other kernels like arters kernel and I think space x whcih can be used on some note 5s.. which brought back that SEANDROID error message in the bootloop. I flashed the skyhigh kernel but flashing the boot.img didn't get rid of that error message again
Click to expand...
Click to collapse
re: not sure what you mean
bloewen4 said:
Hi thanks for the reply! I did try that already unless flashing a stock firmware is different than putting it in AP as I flashed the kernel. Do I need to select some different optioms in odin since I data wiped everything and need all the necessary files to boot the phone? Oh and I did put the skyhigh kernel back on.
Click to expand...
Click to collapse
Your best bet is to download the official Note 5 N920T odin flash firmware,
unzip it so you will end up with a TAR.MD5 file.
Then do a full wipe including system, data, cache, dalvik and last but not least
a factory reset in twrp recovery.
Once you do that your phone will be working properly again, flashing a kernel
or flashing firmware is the same process in odin. Use the AP slot.
And now I know what messed up your phone... it was as I posted before either
flashing the wrong kernel or the kernel got deleted who knows how.
That's all I can tell you except if you want the link to the official Samsung
N920T firmware here it is:
http://forum.xda-developers.com/tmo...t/rom-android-6-0-marshmallow-note-5-t3250812
The link also guides you thru the odin flashing process and other important things.
Good luck!
re: not sure what you mean
Quote:
Originally Posted by bloewen4
Hi thanks for the reply! I did try that already unless flashing a stock firmware is different than putting it in AP as I flashed the kernel. Do I need to select some different optioms in odin since I data wiped everything and need all the necessary files to boot the phone? Oh and I did put the skyhigh kernel back on.
Click to expand...
Click to collapse
I was researching some methods of flashing firmware to a completely wiped phone and read somewhere that there is a method to download all the files individually and put them into all the other sections in odin but I guess these tar.md5 files are a package of everything and one file is enough for a completely wiped phone? If all I need to k ow is to download that firmware unzip and flash in AP then awesome So longlong as they both have the same effect.
Your best bet is to download the official Note 5 N920T odin flash firmware,
unzip it so you will end up with a TAR.MD5 file.
Then do a full wipe including system, data, cache, dalvik and last but not least
a factory reset in twrp recovery.
Once you do that your phone will be working properly again, flashing a kernel
Click to expand...
Click to collapse
Just to clarify the order of this; first download that firmware via that link. 2nd wipe everything in twrp except for recovery so I can go back into twrp and factory reset in twrp? This alone will boot my phone before flashing the firmware? Or do I need to factory reset in twrp then flash that firmware in odin to get a boot? And is this custom firmware do I need to root again after I get boot?
Thanks for the link to that firmware going to be trying this right after work
bloewen4 said:
re: not sure what you mean
Quote:
Originally Posted by bloewen4
Hi thanks for the reply! I did try that already unless flashing a stock firmware is different than putting it in AP as I flashed the kernel. Do I need to select some different optioms in odin since I data wiped everything and need all the necessary files to boot the phone? Oh and I did put the skyhigh kernel back on.
I was researching some methods of flashing firmware to a completely wiped phone and read somewhere that there is a method to download all the files individually and put them into all the other sections in odin but I guess these tar.md5 files are a package of everything and one file is enough for a completely wiped phone? If all I need to k ow is to download that firmware unzip and flash in AP then awesome So longlong as they both have the same effect.
Your best bet is to download the official Note 5 N920T odin flash firmware,
unzip it so you will end up with a TAR.MD5 file.
Then do a full wipe including system, data, cache, dalvik and last but not least
a factory reset in twrp recovery.
Once you do that your phone will be working properly again, flashing a kernel
Just to clarify the order of this; first download that firmware via that link. 2nd wipe everything in twrp except for recovery so I can go back into twrp and factory reset in twrp? This alone will boot my phone before flashing the firmware? Or do I need to factory reset in twrp then flash that firmware in odin to get a boot? And is this custom firmware do I need to root again after I get boot?
Thanks for the link to that firmware going to be trying this right after work
Click to expand...
Click to collapse
Wait. You have a W8 variant. Odin won't flash a T variant on your W8 device, I don't believe. You need to download your carrier specific, hopefully 6.0.1 version, of the firmware for your specific carrier version, and flash that in the latest 3.10.7 version of odin.
---------- Post added at 09:21 PM ---------- Previous post was at 09:08 PM ----------
bloewen4 said:
re: not sure what you mean
Quote:
Originally Posted by bloewen4
Hi thanks for the reply! I did try that already unless flashing a stock firmware is different than putting it in AP as I flashed the kernel. Do I need to select some different optioms in odin since I data wiped everything and need all the necessary files to boot the phone? Oh and I did put the skyhigh kernel back on.
I was researching some methods of flashing firmware to a completely wiped phone and read somewhere that there is a method to download all the files individually and put them into all the other sections in odin but I guess these tar.md5 files are a package of everything and one file is enough for a completely wiped phone? If all I need to k ow is to download that firmware unzip and flash in AP then awesome So longlong as they both have the same effect.
Your best bet is to download the official Note 5 N920T odin flash firmware,
unzip it so you will end up with a TAR.MD5 file.
Then do a full wipe including system, data, cache, dalvik and last but not least
a factory reset in twrp recovery.
Once you do that your phone will be working properly again, flashing a kernel
Just to clarify the order of this; first download that firmware via that link. 2nd wipe everything in twrp except for recovery so I can go back into twrp and factory reset in twrp? This alone will boot my phone before flashing the firmware? Or do I need to factory reset in twrp then flash that firmware in odin to get a boot? And is this custom firmware do I need to root again after I get boot?
Thanks for the link to that firmware going to be trying this right after work
Click to expand...
Click to collapse
What carrier are you on? Go to sammobile and find out exactly what firmware is the latest for your variant on your carrier, for us T variants it's dpd1, but yours will be different, and sammobile is slow so if you can find a mirror somewhere for the stock firmware do that, download it...should be a tar.md5....if you get an error loading it you can often remove the .md5 from the extension...now first reboot recovery and you only need to wipe art/dalvik cache, system, data, cache, and if you want to internal storage but I normally don't...if you wipe efs and everything else you'll be sorry because only thing that will restore it is a full factory odin firmware flash...which is exactly what we're doing...so wipe those partitions then reboot download mode....launch odin and load your downloaded image into the AP slot. Make sure it's at least 3.10.7 version of Odin...when you connect the usb after rebooting to download mode you should see a green/blue box with COM:x (where x is a com port number on your pc) and it should say added...now flash it and wait until it finishes, it'll reboot maybe even a couple times, but it'll eventually make it to the setup screen- from here you can continue stock or flash twrp in odin then recovery flash a rooted kernel for stock rooted or continue with a custom rom, there's a fix in the note 5 gen section for making t/w8 devices work with call audio on intl roms and there's some stock Deodexed stuff at this point and certainly tekhd's mm rom...so from there the choices are yours...but your device is fine you just NEED to flash the correct stock firmware for your variant and use the latest version of odin with a factory usb cable and latest usb drivers from Samsung on your pc when you do it...you'll find links to all this stuff in most of the guides that are abundantly available...
Wait. You have a W8 variant. Odin won't flash a T variant on your W8 device, I don't believe. You need to download your carrier specific, hopefully 6.0.1 version, of the firmware for your specific carrier version, and flash that in the latest 3.10.7 version of odin.
Click to expand...
Click to collapse
I realize I have a W8 and hes providing the firmware for a T. I rooted with a kernel that was for a T version and everything worked fine. I researched rooting note 5 SM-N920W8 and they said do everything the same for the T version because theyre basically identical and isnt much info on the w8 version. So far Ive had no issues flashing everything designed for the T version on my W8. Actually Ive only tried flashing stock w8 firmware from.sammobile.com and got a fail in odin so now Ill try the version MisterJunkie provided me with for the T version unless considering all this you think I should still try a different firmware all together for the W8?
Misterjunky said:
Your best bet is to download the official Note 5 N920T odin flash firmware,
unzip it so you will end up with a TAR.MD5 file.
Then do a full wipe including system, data, cache, dalvik and last but not least
a factory reset in twrp recovery.
Once you do that your phone will be working properly again, flashing a kernel
or flashing firmware is the same process in odin. Use the AP slot.
And now I know what messed up your phone... it was as I posted before either
flashing the wrong kernel or the kernel got deleted who knows how.
That's all I can tell you except if you want the link to the official Samsung
N920T firmware here it is:
http://forum.xda-developers.com/tmo...t/rom-android-6-0-marshmallow-note-5-t3250812
The link also guides you thru the odin flashing process and other important things.
Good luck!
Click to expand...
Click to collapse
Bud, that's not the official tmo pd1 firmware, and I'm not sure if the leaked (alright it would likely run) would be the best here...plus he scares me when he says he cleared EVERYTHING cuz I'm thinking back to exactly how much twrp will wipe, but it's a lot so I fear he's going to need some partitions restored that are only going to come from a full pit file mapping...I don't believe official pd1 would flash in odin, nor would I recommend doing so- I would locate the most recently official firmware to ensure all partitions are restored, then if he doesn't have official mm support he can look into the leak, but if he had official for his variant and carrier that's his best bet to ensure 100% fix and give him a solid foundation to start from if he wants to root, rom, mod, etc
Not to discount your advice, I'd just hate to see him in a worse place than he is...which he's not even bricked YET...but he's starts screwing with wiping efs or messaging with csc stuff from different variants and he could back himself into a corner...
What carrier are you on? Go to sammobile and find out exactly what firmware is the latest for your variant on your carrier, for us T variants it's dpd1, but yours will be different, and sammobile is slow so if you can find a mirror somewhere for the stock firmware do that, download it...should be a tar.md5....if you get an error loading it you can often remove the .md5 from the extension...now first reboot recovery and you only need to wipe art/dalvik cache, system, data, cache, and if you want to internal storage but I normally don't...if you wipe efs and everything else you'll be sorry because only thing that will restore it is a full factory odin firmware flash...which is exactly what we're doing...so wipe those partitions then reboot download mode....launch odin and load your downloaded image into the AP slot. Make sure it's at least 3.10.7 version of Odin...when you connect the usb after rebooting to download mode you should see a green/blue box with COM:x (where x is a com port number on your pc) and it should say added...now flash it and wait until it finishes, it'll reboot maybe even a couple times, but it'll eventually make it to the setup screen- from here you can continue stock or flash twrp in odin then recovery flash a rooted kernel for stock rooted or continue with a custom rom, there's a fix in the note 5 gen section for making t/w8 devices work with call audio on intl roms and there's some stock Deodexed stuff at this point and certainly tekhd's mm rom...so from there the choices are yours...but your device is fine you just NEED to flash the correct stock firmware for your variant and use the latest version of odin with a factory usb cable and latest usb drivers from Samsung on your pc when you do it...you'll find links to all this stuff in most of the guides that are abundantly available...
Click to expand...
Click to collapse
My carrier is Rogers. I did goto sammobile.com already and downloaded and flashed what I thought was the current stock firmware for my 920w8, but I flashed without wiping all data as previously stated. Maybe doing this will allow my firmware to flash? Will try when Im home from work. Will also post the link from sammobile.com for the exact firmware I download just to verify ots the right one.
Yeah I literally wiped everything I checked all the boxes and I remember having to manually type y e s to proceed so yeah pretty serious wipe lol.
I have the latest version of odin 3.10.7 and tried installing drivers on my pc said theyre already installed.
When I connect my phone to usb in download mode it says com:4
I thought also that just flashing the stock firmware would be the solution since I get download mode and twrp I just have a blank phone but as I said I did get the stock firmware from sammobile.com and try but it failed. Maybe I grabbed the wrong one but it looked pretty straightforward. Maybe with MM coming out Wednesday for rogers note 5 Im downloading the wrong version.
Im worried like you wrote earlier that I deleted too much with twrp if I needing mapping partitions and PIT files I will need some serious help that stuff is beyond me.
Go to sammobile and find out exactly what firmware is the latest for your variant on your carrier, for us T variants it's dpd1, but yours will be different, and sammobile is slow so if you can find a mirror somewhere for the stock firmware do that, download it...should be a tar.md5....if you get an error loading it you can often remove the .md5 from the extension...now first reboot recovery and you only need to wipe art/dalvik cache, system, data, cache, and if you want to internal storage but I normally don't...if you wipe efs and everything else you'll be sorry because only thing that will restore it is a full factory odin firmware flash...which is exactly what we're doing...so wipe those partitions then reboot download mode....launch odin and load your downloaded image into the AP slot. Make sure it's at least 3.10.7 version of Odin...when you connect the usb after rebooting to download mode you should see a green/blue box with COM:x (where x is a com port number on your pc) and it should say added...now flash it and wait until it finishes, it'll reboot maybe even a couple times, but it'll eventually make it to the setup screen- from here you can continue stock or flash twrp in odin then recovery flash a rooted kernel for stock rooted or continue with a custom rom
Click to expand...
Click to collapse
Goodmorning, as I mentioned I would try this right after work. Heres what I did.. I verified that I had the 3.10.7 version of odin which I do, checked drivers on pc which I have. I re downloaded the firmware from here http://www.sammobile.com/firmwares/database/SM-N920W8/ Its was the Canadian Rogers version 5.1.1 near the bottom as mm isnt out for rogers yet.. Oh and I checked my cable ot connected another device to my PC.. so after all this I went into twrp wiped everything you mentioned. After that I was looking for the factory reset option in twrp but couldn't find anywhere only restore which I have no rom backups made. Do I need this step?
Went into download mode pressed vol up.. opened odin 3.10.7. I did notice a change after wiping. Its now says com:6 instead of com:4 if that means anything.. I loaded the firmware into AP it took a while to load but it did without errors. Flashed and failed If you need I can copy the error message from odin in here tonight.
Do you think I need to remap partitions as you said earlier? Getting PIT files? Im lost here... appreciate any help
Still with a blank phone, any ideas?
Or if anyone could direct me to another thread that might be useful for re mapping partitions?
Have you tried flashing twrp again in Odin?
I hit too many buttons before when wiping. It even erased my recovery.
Once I had recovery again I could Odin flash the official firmware.
Could try Philz recovery as well.
Sent from my SM-N920T using XDA-Developers mobile app
Yeah I did try that heres the link where I got the firmware and yeah twrp is on there.
Goodmorning, as I mentioned I would try this right after work. Heres what I did.. I verified that I had the 3.10.7 version of odin which I do, checked drivers on pc which I have. I re downloaded the firmware from here http://www.sammobile.com/firmwares/database/SM-N920W8/ Its was the Canadian Rogers version 5.1.1 near the bottom as mm isnt out for rogers yet.. Oh and I checked my cable ot connected another device to my PC.. so after all this I went into twrp wiped everything you mentioned. After that I was looking for the factory reset option in twrp but couldn't find anywhere only restore which I have no rom backups made. Do I need this step?
Went into download mode pressed vol up.. opened odin 3.10.7. I did notice a change after wiping. Its now says com:6 instead of com:4 if that means anything.. I loaded the firmware into AP it took a while to load but it did without errors. Flashed and failed If you need I can copy the error message from odin in here tonight.
Click to expand...
Click to collapse
bloewen4 said:
Yeah I did try that heres the link where I got the firmware and yeah twrp is on there.
Click to expand...
Click to collapse
Since you have twrp on the phone.. Tap to create a backup even if there's no system on it so that you can at least make it create the folder.. Try using adb to push a ROM and kernel to the phone so you can use twrp to flash it. If you can get into the phones storage using Windows then just drop a ROM and kernel for your device in the folder and then use twrp to flash.
By the way.. Use the SkyHigh kernel.
Follow the directions to a T!!
http://forum.xda-developers.com/note5/orig-development/kernel-skyhigh-tw-6-0-1-kernel-t3321646
If you can get into the phones storage using Windows then just drop a ROM and kernel for your device in the folder and then use twrp to flash.
Click to expand...
Click to collapse
I did try immediately to connect with Windows to my phone so I could try flashing stock firmware with twrp but its currently not allowing me access to view storage on Windows though it does connect with odin saying com:6.
Since you have twrp on the phone.. Tap to create a backup even if there's no system on it so that you can at least make it create the folder..
Click to expand...
Click to collapse
I will do this as soon as I am home from work. Will this perhaps allow access with Windows and/or adb sideloader?
Try using adb to push a ROM and kernel to the phone so you can use twrp to flash it.
Click to expand...
Click to collapse
I will be researching how to do this. Have you any threads to learn adb? So basically this will allow me to put ROMS or other files into the internal memory?
By the way.. Use the SkyHigh kernel.
Follow the directions to a T!!
http://forum.xda-developers.com/note...ernel-t3321646
Click to expand...
Click to collapse
Is this the right kernel for SM-N920W8?
* SAME kernel for ALL supported variant !!
** If other party cannot hear voice when on speaker phone ** Then read Post #636
SM-N920 C / CD / G / i [ v3.2 ]
SM-N9200_HK [ v3.2 ]
Click to expand...
Click to collapse
Also Marshmellow isnt out officially for SM-N920W8 so Ill need a kernel for lollipop 5.1.1 unless you suggest to wait for marshmellow then try a mm kernel?
Thanks for helping!
How about this adb sideloader does anyone think that will work to load the firmware? If so any good threads to guode me?
What did you end up doing? I have a similar problem except no recovery mode, just download mode for Odin.
bloewen4 said:
Goodmorning, as I mentioned I would try this right after work. Heres what I did.. I verified that I had the 3.10.7 version of odin which I do, checked drivers on pc which I have. I re downloaded the firmware from here http://www.sammobile.com/firmwares/database/SM-N920W8/ Its was the Canadian Rogers version 5.1.1 near the bottom as mm isnt out for rogers yet.. Oh and I checked my cable ot connected another device to my PC.. so after all this I went into twrp wiped everything you mentioned. After that I was looking for the factory reset option in twrp but couldn't find anywhere only restore which I have no rom backups made. Do I need this step?
Went into download mode pressed vol up.. opened odin 3.10.7. I did notice a change after wiping. Its now says com:6 instead of com:4 if that means anything.. I loaded the firmware into AP it took a while to load but it did without errors. Flashed and failed If you need I can copy the error message from odin in here tonight.
Do you think I need to remap partitions as you said earlier? Getting PIT files? Im lost here... appreciate any help
Click to expand...
Click to collapse
Where did you get your firmware from?
Why oh why did I bother reading through this entire thread, with intentions to help OP. Lol I didnt realize the date till the last post.
Hey guys,
I was previously on xtresolite 2.4 lollipop rom and saw that he had a new rom out based on Marshmellow 6.01.
The instructions for the installation the new rom said to flash the new bootloader, modem and recovery before installing the new rom.
I flashed the bootloader with Odin using the BL button as instructed and how it's stuck on the Samsung Screen. I can still boot into download mode, but that's about it. It won't let me boot into recovery. Doing a bit of research it says to boot into download warning screen and cancel. Then quickly do the recovery buttons (volup, home, power), but it still won't go in.
So now I'm stuck! i'm trying to download the new stock Marshmellow firmware to see if I can install that, but aside from that I'm not sure what else I can do.
Any suggestions? Since I'm still able to use Odin, can I try to re-install the correct bootloader or is that too late? I'm not even sure which bootloader to install now. :crying::crying::crying:
Any help is much appreciated!
Thanks,
kc
as long as you can boot into the download mode, everything's alright. try flashing the latest stock rom for your model. then a new recovery, and then the new xtrestolite rom.
if something fails. do it again.... flash the latest stock rom, and so on.
Just make sure you have the correct model software for your phone and there won't be any issues. Did you backup your imei way back when you rooted on lollipop? If you did then everything will be fine if you didn't, Restore stock ROM and root, then backup your imei, hopefully you won't have any issues with your modem
Try pressing on power + vol down untill the phone shuts down then quickly press home+power+vol up before the phone starts . you will be in recovery try a factory reset then wait for the first boot. Voila !
hey all, just wanted to update. I still couldn't get into recovery, but was able to flash the stock rom and it's working as stock right now. Been using it for the past week or so and no major issues noted. I'm a bit scared to mess around again
Now that I'm on stock Marshmallow 6.0.1 rom, do I still need to try and flash the modem and boot loader for it?
Also, now that i'm on stock do I need to unroot again to install the twrp recovery? or can I just go into odin and flash it right away?
Thanks again for the help and suggestions!!!
tnimk said:
hey all, just wanted to update. I still couldn't get into recovery, but was able to flash the stock rom and it's working as stock right now. Been using it for the past week or so and no major issues noted. I'm a bit scared to mess around again
Now that I'm on stock Marshmallow 6.0.1 rom, do I still need to try and flash the modem and boot loader for it?
Also, now that i'm on stock do I need to unroot again to install the twrp recovery? or can I just go into odin and flash it right away?
Thanks again for the help and suggestions!!!
Click to expand...
Click to collapse
Stock rom overrides everything so your root is long gone & you now have the latest bootloader & modem already - don't stress & no need to do anything else! If you want custom recovery simply flash with latest TWRP using Odin in download mode (in tar format using AP button). Don't root with TWRP if asked to - instead download latest recovery flash-able SuperSU (ZIP) onto your device & then flash it using TWRP. This will be the safest option for you (with root if you want).
AFAIK one always uses the "AP" button if you wanna flash <anything> with Odin - not the BL button (I've never used this). The rest are for pro's only (of which I'm not one). I'm simply a regular rom flasher & read/study/compare several guides before attempting anything I've never done before with my device. If the overall feeling is not a good one, rule of thumb is I don't proceed until I feel confident enough about what I'm attempting to do.
Good luck.
On my sm-G920I
I flashed the xtresolite ROM without first flashing the bootloader and modem and it worked fine for me, if you back up everything with an otg cable onto a USB then flash the ROM everything should work fine but you will have to wait around 5 minutes for it to boot. If your still waiting after 10-20 minutes then you did something wrong and you can just wipe your entire phone then recover everything from your backup on your USB ????????