Database Info

Boot Looping Animation

I had a boot loop on the samsung logo on the Galaxy Tab 2 P5100, can not get into the main screen, until the battery runs out. I've tried to restore backup in CWM and wipe data / factory reset but still experienced the same thing. Is there another way to get into the main screen?

You might try flashing a rom through Odin, for instance this one:
http://forum.xda-developers.com/showthread.php?t=1836811
Verstuurd van mijn GT-P5100 met Tapatalk

eejee said:
You might try flashing a rom through Odin, for instance this one:
http://forum.xda-developers.com/showthread.php?t=1836811
Verstuurd van mijn GT-P5100 met Tapatalk
Click to expand...
Click to collapse
after trying these steps, still experiencing the same thing, and also when doing recovery mode, having stuck to the robo half loading then reboot and return to the samsung boot logo looping animation :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

First see if you can enter cwm recovery volume up + power when boot if xo try factory reset and delete cash and dalvik cash
you could also try flashing fryrom v7 from it
If no resolution so try enter download mode and try flashing firmware for 5100 download it from www.samfirmware.com and flash by pc odin
Do not worry i think it is a soft brick as long as you managed to enter recovery mode and download mode
Sent from my GT-P5100 using xda app-developers app

Thank U Selim :good::laugh:, after I try flashing firmware for 5100 download it from samfirmware and flash by pc odin and after that, I also did a factory reset and then can go to the main screen . Because of this incident, I get a shock therapy for a week :crying:. Now the position of my GT - P5100 was ICS 4.0.4 and unroot .

samsung i9003 stop on samsung logo

i flash odin
with this ver
MODEM_I9003DDKC1_REV_00_CL966700.tar.md5
MODEM_I9003DDKA5_REV_00_CL855960.tar.md5
MODEM_I9003DXKB2_REV_00_CL863799.tar.md5
all ver flash ok but same problem
show samsung model i9003 then prosess and stop on samsung logo blinking anybody help what to do next to recover handset

gauravrajput said:
i flash odin
with this ver
MODEM_I9003DDKC1_REV_00_CL966700.tar.md5
MODEM_I9003DDKA5_REV_00_CL855960.tar.md5
MODEM_I9003DXKB2_REV_00_CL863799.tar.md5
all ver flash ok but same problem
show samsung model i9003 then prosess and stop on samsung logo blinking anybody help what to do next to recover handset
Click to expand...
Click to collapse
*Download ODIN V1.85 ..
*Download samsung USB drivers for I9003
*Download a stock ROM of your choice from here http://forum.xda-developers.com/showthread.php?t=1004647
*Run ODIN and point the downloaded stock ROM(PDA only)
*Get your device in download mode (Volume down+Home button+Power key)
*Connect to PC via USB
*Your phone should be detected by ODIN by now and com port should turn yellow.
*Press Start and wait till its completely done and you get a message as "PASSED".
*Be patient till your phone boots up completely and dont panic,process like this take more than 15-20 mins for completion.
Dont mess up your device again .. GoodLuck:good:

THNX TO REPLY I DO AS U INSTRACT ME
I FLASH THIS FILE I9003DDKB2_bysamsdroid THIS IS STOCK ROM FLASH OK BUT PROBLEM SAME ANY OTHER WAY TO RECOVER IT

If u DX region (Asia) download dxkf1, if u XX region (euro) download xxkpe.
Others single tar firmware will not help you
Flash as normal
Pit file as pit
Code file as pda
Modem as phone
CSC as CSC.
Sent from my Galaxy Nexus using Tapatalk 2

If u DX region (Asia) download dxkf1, if u XX region (euro) download xxkpe.
Others single tar firmware will not help you
Flash as normal
Pit file as pit
Code file as pda
Modem as phone
CSC as CSC.
Click to expand...
Click to collapse
i downlode this ver [9003DXKF1] but this is single firmwer can u help me full flash file i w8
u r right i alredy flash this ver single firmwer but not done

I SERCH AND FOUND THIS VER [I9003DXKF1] FLASH OK THIS VER BUT STOP ON SAMSUNG LOGO PLZ HELP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

gauravrajput said:
I SERCH AND FOUND THIS VER [I9003DXKF1] FLASH OK THIS VER BUT STOP ON SAMSUNG LOGO PLZ HELP
Click to expand...
Click to collapse
wtf... use ODIN V1.81 or V1.85.. you are using that for galaxy tab.. I think maybe thats the problem

Flash pit first. Than Dicon the USB. Than take out battery than put back battery. Than download mode again. Than connect USB again than flash the firmware.
Did you ever read the guide?
Sent from my Galaxy Nexus using Tapatalk 2

[Q] P5100 think its a espressowifi!

Hell i have a proplem my tablet is a GT-2 10.1 3G P5100 and how ever somone installed wrong rom and the tablet now think its a other model and i cannt install custom rom got error 7. if try to flash firmware via odin it say pass, and after i restart device and its try to install.. half way its writh erase and install failed.. whats wrong and what way i take back?? sorry for my englisch im from switzerland..
It does only boot in Recovery if charger is pluged on a usb host its just charge and does not start.

DarkWeed said:
Hell i have a proplem my tablet is a GT-2 10.1 3G P5100 and how ever somone installed wrong rom and the tablet now think its a other model and i cannt install custom rom got error 7. if try to flash firmware via odin it say pass, and after i restart device and its try to install.. half way its writh erase and install failed.. whats wrong and what way i take back?? sorry for my englisch im from switzerland..
It does only boot in Recovery if charger is pluged on a usb host its just charge and does not start.
Click to expand...
Click to collapse
So, your device says it's a 5110? Is your recovery custom or stock? Do you have root?
If you have root, you could try this: http://forum.xda-developers.com/showthread.php?t=1856532
If you don't have custom recovery, try to install it and then flash a correct ROM: http://forum.xda-developers.com/showthread.php?t=2202635

hi my tab does not start up so i dont know its still rootet or not i don know what rom is on it. In download mode it say its a 5100 and current binary is SAMSUNG_OFFICIAL..
if i try with odin flash stock firmware its all ok but it does not reboot. its show only battery charging!
if i disconnect the tab and start it it say installing... after half work it say erase.. and im back in android recovery

DarkWeed said:
hi my tab does not start up so i dont know its still rootet or not i don know what rom is on it. In download mode it say its a 5100 and current binary is SAMSUNG_OFFICIAL..
if i try with odin flash stock firmware its all ok but it does not reboot. its show only battery charging!
if i disconnect the tab and start it it say installing... after half work it say erase.. and im back in android recovery
Click to expand...
Click to collapse
You didn't tell me which recovery you have. If it's a custom recovery, that would be a big help. You could download a ROM to your external sd card and flash it that way. If it's stock recovery, well that's not so good.

i can flash twrp v2.4.0.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but if i try to flash a rom i got status 7 error
if i try to flash firmware with odin it say green pass but does not restart i have to start tablet manuall then it say install and after half work it say eraising and i got back to recovery of android
Hmm my tab never reboot it self.. now i have TWRP v2.7.0.1 on it.
its posible to install rom now but no diverence the tab starts only in recovery and does not reboot it self..

Flash latest recovery for your device, for p31xx and p51xx find the link in my signature.
Make a factory reset and wipe /system, after that flash a Rom for your device.
Gesendet von meinem GT-I8190 mit Tapatalk

Bricked my Micromax Unite 2

I bricked my phone while flashing It does not boot or go to cwm recovery mode. It is detected by pc. What to do????
Model of phone: Micromax unite 2

Flash Stock rom.....
http://www.skyneel.com/2014/11/how-to-flash-stock-rom-on-micromax-a106-unite-2.html
Don't forget to thanks. :thumbup:

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Error what to do now

DrakeDrago said:
View attachment 3177846
Error what to do now
Click to expand...
Click to collapse
Install proper driver

flash the correct version
DrakeDrago said:
I bricked my phone while flashing It does not boot or go to cwm recovery mode. It is detected by pc. What to do????
Model of phone: Micromax unite 2
Click to expand...
Click to collapse
Note there is three version of the OS Android see which version is loaded on your device check it by the sticker behind the battery search for a simialar rom
I flashed with the current here is the http://gaming.netalien.biz/2015/04/bricked-micromax-a106-how-to-unbrick.html hope this would help

Having the same issue...........
But even none of the drivers work properly with ma device...
Phone bricked while doing factory recovery after lollipop update
Please anybody help me out

the sp tool wont do anything even if i connect my phone with a usb to my comp... it just like freezes there... help!:crying:

Bricked My Unite 2 While installing Lollipop OTA Update using SP Flash Tool, Now phone is not Starting nor PC detect it. On Flashing with SP FlashTool , SP Flash Tool Starts (NOT RESPONDING) & PC gives error "USB Device Not Recognized"
please Help me to solve this problem.

Well Its hard bricked guys please tell me how to fix it...
I really want my phone back to normal it has been more than a month now since my phone got hard bricked!... pleasee......

MasterD.Ace said:
Well Its hard bricked guys please tell me how to fix it...
I really want my phone back to normal it has been more than a month now since my phone got hard bricked!... pleasee......
Click to expand...
Click to collapse
Try this www .micromaxunite2 . net/soft-brick-vs-hard-bricked-vs-broken
remove spaces

i flash this phone using flash tool and scatter file.. and selecting format+download option.. after flashing set is dead.. but it showing com port.. please help to solve this problem..

Hi all!!
Plz help me as my phone is hard bricked! I updated LP through OTA however after upgrade I went to recovery mode as SIM card were not detected! Hence I cleared the cache partition and now phone will not start nor able to connect it to PC! I tried Drakedragos link! However m unable to flash my phone! Plz help....

I have bricked my phone and only phone logo is coming ... What should I do 2 recover my phone.?? Pls help.. My mobile model is : Micromax unite 2

guys I have micromax unite2 a106 phone. I tryd to flash philz in it by mobile uncle tools with the help of a thread on xda.
But now when I reboot into recovery, it only shows logo for sometimes and then blank screen.
I think that philz rec was made fir its kitkat version but now it is lollipop updated.
But my recovery is lost.
How to bring it back.Or gv me CWM for lollipop version....????????

This is how you should install the drivers!

DrakeDrago said:
View attachment 3177846
Error what to do now
Click to expand...
Click to collapse
Did you get the solution...
Same issue here

Cache mount issue in recovery mode
After flashing Successfully darkl l custom Rom I am facing the problem. The Rom had been flashed correctly and after that I was trying to flash super. Su zip file by Phil recovery. And then these messages poped up
"E:can't mount /cache/recovery log"
"E:can't open/cache/recovery log "
E. T.C
After that I am stuck at boot logo and can't flash anything. Is there any solution. Plzzzz help.

My phone is not detected by pc in sp flash tool nothing happens when i insert my phone help guys UNITE 2

A106 bricked
I bricked my a106. Its detected bys SP flash tool and by my PC. I tried flashing it with stock ROM and SP flash tool showed a green circle. But my phone is not charging not boots. But it's detected by PC and SP flash tool. What to do? Please help!!

Altair827 said:
I bricked my a106. Its detected bys SP flash tool and by my PC. I tried flashing it with stock ROM and SP flash tool showed a green circle. But my phone is not charging not boots. But it's detected by PC and SP flash tool. What to do? Please help!!
Click to expand...
Click to collapse
I am also bricked it many times .now using cm 13 by temasek no issues.

Note 5 White Boot Loader (SM-N920G)

Hello guys If you Feel Bad regrading the black boot loader of note 5 when you are using Note 7 Rom then i have a solution for your problem
Here you go the custom boot loader of Note 5 SM-N920G made by me
1) Note 5 White Boot Loader
Download Link:- https://drive.google.com/file/d/0B8NYN9JzEZlqcjg0UllUeFdJUGM/view?usp=sharing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
=======================================================
2) Note 5 Stock Boot Loader
Download Link:- https://drive.google.com/file/d/0B8NYN9JzEZlqRm14YnVPbTdLOWc/view?usp=sharing
=======================================================
3) Note 7 Boot Loader
Download Link:- https://drive.google.com/file/d/0B8NYN9JzEZlqRHlBRjE3ZjhOT00/view?usp=sharing
=======================================================
!Warring!
If you Flash this your Knox Will Become 0x1 and you will loose your phone warranty
=======================================================
Instructions To Use this
Download the file and go to download mode in your phone then connect your phone to pc and make sure you are familiar with odin .tar files flashing if you know about it then flash it via Odin (in odin under "AP" section select the file and flash it thats it) if you are not knowing anything about flashing it then take any advice from others in this thread or ask me
=======================================================
Thanking My Best Helpers Always
@Gabri98
@bulldog74ts
@Albe95
If this works on other note 5 model No# let me know but take your own risk as always

Reserved for Upcoming Custom Boot loader as requested By Users in this thread

Amit.A said:
Reserved for Upcoming Custom Boot loader as requested By Users in this thread
Click to expand...
Click to collapse
Note 7 white not working. Its stuck at odin

Vishnu pv said:
Note 7 white not working. Its stuck at odin
Click to expand...
Click to collapse
Is other boot loaders working except note 7

Vishnu pv said:
Note 7 white not working. Its stuck at odin
Click to expand...
Click to collapse
whats the error message in odin you get failed or passed if failed then send me odin logs

Amit.A said:
whats the error message in odin you get failed or passed if failed then send me odin logs
Click to expand...
Click to collapse
I tried note 5 black and note 7 white. Note 5 black successfully flashed via odin. And it showed "Passed". But note 7, its got stucked at 90% green progress bar in odin and at that stage its flashing param. I waited for 10mins. But not succeeded. Then i had to disconnect the cable and it showed "Failed"

Vishnu pv said:
I tried note 5 black and note 7 white. Note 5 black successfully flashed via odin. And it showed "Passed". But note 7, its got stucked at 90% green progress bar in odin and at that stage its flashing param. I waited for 10mins. But not succeeded. Then i had to disconnect the cable and it showed "Failed"
Click to expand...
Click to collapse
is the note 5 white boot loader working

Hello! excellent work, I would like to use it in N920T you can make it compatible? or share some zip file to install manually?

Will work with SM-N920CD ??

javierduran said:
Hello! excellent work, I would like to use it in N920T you can make it compatible? or share some zip file to install manually?
Click to expand...
Click to collapse
I posted n5 boot splashes(white/black) some time ago as a zip, were working on most variants(T included). http://forum.xda-developers.com/showthread.php?t=3446260