does our idol 3 support init.d and can we use init.d tweeks?
It does after you install Universal init.d
https://play.google.com/store/apps/details?id=com.androguide.universal.init.d&hl=en
ok, thank you famewolf, i just wanted to be sure
To me says kernel not supported..
Sent from hell
mine is working perfectly, i just switched it on and rebooted
Nikola Jovanovic said:
To it says kernel not supported..
Sent from hell
Click to expand...
Click to collapse
Been using it since around the 5th day after getting root...it sets my selinux settings to "permissive" on every boot via a script in /etc/init.d
I know you've been pointing me on it but the app writes a bad story for me.. Don't know why..
Sent from hell
Nikola Jovanovic said:
I know you've been pointing me on it but the app writes a bad story for me.. Don't know why..
Sent from hell
Click to expand...
Click to collapse
Hmm perhaps they did something strange with the 6045K kernel. Lets check what you've done so far...you enabled it and did the reboot then went back into it and it still said it's not compatible? If so, you might check "similar apps" that give init.d support to see if another works for you..there are literally dozens of ways to enable init.d so one of them will work for you I'm sure....as a last ditch alternative Rom Toolbox Lite has a scripter which can run scripts and you can tell it to run them at boot...it gives you similar abilities but it runs much later in the boot process than init.d...still better than nothing.
For sure. I'll try to find out later what might be a cause to a problem.
The only thing that got me in need for kernel set on permissive is viper4android, but found some script that works just by flashing it through custom recovery forcing viper to run on enforcing kernel.
Sent from hell
Related
If anyone is interested in trying this i have a beta kernel with root up for testing.Try at your own risk this is a test I have flashed and and two others have flashed it and it does work and gives root.
http://forum.sdx-developers.com/epi...l-fluffkernel-epic-version-0-9-9-2-with-root/
You will need to know how to use Odin to flash this there are many how to's on the forum here on how to use it.After the flashed the phone will reboot or power itself off twice then it should be stable after that.I highly recommend that you undo the JoeyKrim root method for the epic if you have done it basically just move back the playlogo file and delete the rooting script.
Just want to bump this.I have uploaded a new beta kernel root is now fully working for anyone who wants to test it.
I have a fully rooted and working kernel now posted please test it out.
It is fixed now it seems the sh that the epic uses doesn't like the use of brackets in the shell script.
skeeterslint said:
It is fixed now it seems the sh that the epic uses doesn't like the use of brackets in the shell script.
Click to expand...
Click to collapse
What else is included with kernel? just root?
If you look on sdx there are a few additions.
the script worked flawlessly thank you.
rjmjr69 said:
What else is included with kernel? just root?
Click to expand...
Click to collapse
For the time being it is just a proof of concept that the root script works it took alot of trail and error getting it to work it still needs some work but it does the job right now.The next thing is to find a toolchain that will build a stable kernel with then to start tweaking the kernel config to something with a little less bloat in it.
Works great
Just like to share! This is not a Tutorial!
http://forum.xda-developers.com/showthread.php?t=991276
I installed the Kickass Kernel Tweaks and the Super Charger script.
My Sensation at latest InsertCoin ROM is now faster and snappier as before! It boots faster and if it booted there are no laggs! I can use it from start without laggs.
Option 9 saved 50MB RAM for me!
Need´s more testing that the DEV´s include this in our ROM´s!
Its just great! The Thread dont lie! Its a "new" phone ;-)
Before: Long Press Power Button there was a noticeable lag in the Animation. That is now gone!
I used these scripts
1-V6_SuperCharger_for_Android-update9beta1.sh.txt
2-3GTurboChargerInstallerUpdate2.sh.txt
3-98KickAssKernelTweaksInstallerUpdate3-NO_IO_TWEAK (safer)_test.sh.txt
READ THE THREAD! I said i just like to share! And its need testing ... dont ***** me if YOU do something wrong!
Let's give it a try ;-)
Like how it said "if" it booted LOL
sent from Christ All Mighty II
I ran the script and carefully followed all the steps in the thread now my phone won't boot.Did a battery pull,and wiped cache and dalvik and phone still won't boot.WTF!!!!
STAY AWAY FROM THAT CRAP.It's not proven to work on the Sensation.I learned that the hard way.
NYCguy2020 said:
I ran the script and carefully followed all the steps in the thread now my phone won't boot.Did a battery pull,and wiped cache and dalvik and phone still won't boot.WTF!!!!
STAY AWAY FROM THAT CRAP.It's not proven to work on the Sensation.I learned that the hard way.
Click to expand...
Click to collapse
I just ran the script as well, used option 9 as xtcislove did. works perfectly! feels snappier
t0mle said:
I just ran the script as well, used option 9 as xtcislove did. works perfectly! feels snappier
Click to expand...
Click to collapse
Well i did and i chose option 9 aswell,and i also ran the kickass kernel script per his suggestion.My phone wouldn't boot and i had to do a full wipe and a clean install of the Rom i was on.
NYCguy2020 said:
Well i did and i chose option 9 aswell,and i also ran the kickass kernel script per his suggestion.My phone wouldn't boot and i had to do a full wipe and a clean install of the Rom i was on.
Click to expand...
Click to collapse
Sux :/ perhaps something wrong with the kickass kernel script then..
Worked awesome for me as well!!
I too only have loaded the script (I also option 9) and all work ok.. for now I think if u have custom kernel like me, is better dont activate the script for kernel..
worked for me, i notice the difference!
SN4K3B1T3 said:
Like how it said "if" it booted LOL
sent from Christ All Mighty II
Click to expand...
Click to collapse
Noticed that too lol Ripping good laugh.
Is nine the best option to use?
NYCguy2020 said:
Well i did and i chose option 9 aswell,and i also ran the kickass kernel script per his suggestion.My phone wouldn't boot and i had to do a full wipe and a clean install of the Rom i was on.
Click to expand...
Click to collapse
That's why you nandroid backup before flashing **** like this.
Sent from my HTC Glacier using XDA Premium App
i only test the v6 supercharger, ( V6_SuperCharger_for_Android-update9beta1.sh )
and i can confirm my sensation is faster...
He needs to learn how to better manage a tutorial, looks like a draft copy post lol.
I chose option 9, and it said invalid. Didn't know what else to pick, so I exit.
How is the battery life with this syuff?
Sent from my HTC Sensation 4G using XDA App
asapelectric said:
I chose option 9, and it said invalid. Didn't know what else to pick, so I exit.
Click to expand...
Click to collapse
try downloading busybox installer from the market and install version 1.18.2
speedysilwady said:
try downloading busybox installer from the market and install version 1.18.2
Click to expand...
Click to collapse
I did. I seen the 17 options in the script, chose 9, and it said invalid. Of course when I chose 17 (exit), it said invalid also. Maybe Im not DL the right script? There appears to be multiple scripts on 2 pages.
now i used the :
3GTurboChargerInstallerUpdate2.sh
98KickAssKernelTweaksInstallerUpdate3-NO_IO_TWEAK (safer)_test.sh
i have more memory, i have 320mb, but i dont use sense.
know i have a faster phone
Thread closed because I no longer own this device. The download links no longer work. Sorry for any inconvenience.
Works on the stock system and everything? If you made the stock Triumph experience that much better, Virgin Mobile owes you a debt of gratitude. Heck, I owe you a debt of gratitude!
...just let me make sure it works on my phone first.
Sent from my Frankenphone using Tapatalk
Yeah it should work. You just need to be rooted and have CWM to flash it. Other than that the stock kernel will run the install-recovery.sh script at boot, which will intern run my tweak scripts at boot and viola you have a tweaked out stock phone. In therory it should work with any stock based(no cm7/aosp) rom and kernel as long as the kernel hasn't been modified to not run intsall-recovery.sh at boot!
Yes it works on Stock, and it seems to be running faster, and smoother. Also my compass is now correct, and GPS seems to lock faster 5-8ish seeconds
Thanks! Rated 5.
Thanks! This will be the set of tweaks that my bROM will contain plus me and my brother are trying to get a kernel going. Hopefully we will have the oc up to 1900 maybe more plus were trying to get controllable undervolting for each frequency. There are alot of stuff were going to try to add to it if we can ever get it working. But its still a while down the road!
Sent from my OC'ed Triumph!
What did you change? I locked onto GPS in 2s, whereas my 2nd to last one took 256s, and the last attempt wouldn't lock at all.
yesterday my phone reported it was off the coast of Africa. I'm suing
In all serious though, have you increased the speed the system accesses the SD card? I want to know because I'm running SD Speed Increase and FasterFix, and if your mod fixes both I'll just trash them.
Sent from my Frankenphone using Tapatalk
Rezanow said:
What did you change? I locked onto GPS in 2s, whereas my 2nd to last one took 256s, and the last attempt wouldn't lock at all.
Click to expand...
Click to collapse
Times 2, I would like to know as well
Mine does that too lol, it locates me by africa in the atl ocean, but i just start up gps test and immediately finds my correct location.
Sent from my MOTWX435KT using XDA App
Just the config file for GPS. I found some various fixes. Yeah mine does that as well sometimes. I may look and see if I can fix that!
Yes the SD card read ahead as well ad entire mmc read ahead for the whole system is increased. Partitions are mounted as noatime, nodiratime.
Sent from my OC'ed Triumph!
So I can flash this on my existing ROM? Would be nice to have these tweaks but I dont want to start from stock again Also, I tried that OC kernel but gave me some issues. If I leave this at stock speed I should be ok right?
Sent from my rooted Moto Triumph
b_randon14 said:
Just the config file for GPS. I found some various fixes. Yeah mine does that as well sometimes. I may look and see if I can fix that!
Yes the SD card read ahead as well ad entire mmc read ahead for the whole system is increased. Partitions are mounted as noatime, nodiratime.
Sent from my OC'ed Triumph!
Click to expand...
Click to collapse
Yeah its no biggie seeing as how it immediately locates me after i start gps test, way better than waiting around seeing if it will even locate me at all.
Sent from my MOTWX435KT using XDA App
Fodoom said:
So I can flash this on my existing ROM? Would be nice to have these tweaks but I dont want to start from stock again Also, I tried that OC kernel but gave me some issues. If I leave this at stock speed I should be ok right?
Sent from my rooted Moto Triumph
Click to expand...
Click to collapse
Yeah you can flash this over the stock ROM. This leaves whatever kernel you have intact so if you got the stock kernel it will leave it. But yeah this is pretty universal!
b_randon14 said:
Just the config file for GPS. I found some various fixes. Yeah mine does that as well sometimes. I may look and see if I can fix that!
Yes the SD card read ahead as well ad entire mmc read ahead for the whole system is increased. Partitions are mounted as noatime, nodiratime.
Sent from my OC'ed Triumph!
Click to expand...
Click to collapse
How does this compare to the advanced system tweaks that are a part of Autokiller Memory Optimizer? A few of which might overlap with what you have done.
b_randon14 said:
Yeah you can flash this over the stock ROM. This leaves whatever kernel you have intact so if you got the stock kernel it will leave it. But yeah this is pretty universal!
Click to expand...
Click to collapse
Thanks duder. I'll flash this puppy when I get off work.
Sent from my rooted Moto Triumph
cant wait to flash this! im a newb at this stuff though. how do i root and get CWM on my phone? also, i dont know where to get the drivers i need
Rezanow said:
How does this compare to the advanced system tweaks that are a part of Autokiller Memory Optimizer? A few of which might overlap with what you have done.
Click to expand...
Click to collapse
Well I couldn't ever get the noatime tweaks of autokiller to actually work. And my tcp tweaks increase the tcp buffer window even more than autokillers. And autokillers I/o tweaks only work on the cfq scheduler and none of our kernels use cfq. We have noop anticioatory and deadline. The others I'm not to sure about!
Sent from my OC'ed Triumph!
i installed your tweak and now im in africa..
My gps said I was in africa until I turned on wifi, but now it only locks at 2000 meters.
Sent from my rooted Moto Triumph
@zephiK , I installed the VomerTweaks on top of Mahdi rom and Franco kernel from your signature. I flashed it via TWRP , but dont know if its installed or is successfull etc. Can you let me know what exactly this tweak does and any way of finding if its active / installed ? Is there a option which appears in settings ? Thanks !
You didn't have to make a new thread for this.
To verify that the settings indeed have loaded, you need to use a kernel tweaker app (e.g. FKU, Trickster)... if you see that the maximum (fixed) CPU frequency is 1.2GHz then its loaded. A lot of the questions you asked are answered https://192.227.135.147/get/vomertweaks.txt (ignore the warning)
# What is it?
VomerTweaks is a tried and tested set of custom settings and power modes for your device!
The aim is to enable your device to have insane battery life without losing performance (all of us love da juice!)
We develop and test multiple configurations (for different "user types") & share them with the community.
Click to expand...
Click to collapse
Sorry but it's not showing that min. Cpu frequency on my device in fku but the file was installed correctly via twrp and I just checked it is in the correct location. Any other parameters I could check if it's working correctly somehow?
shapethelola said:
Sorry but it's not showing that min. Cpu frequency on my device in fku but the file was installed correctly via twrp and I just checked it is in the correct location. Any other parameters I could check if it's working correctly somehow?
Click to expand...
Click to collapse
Errr whoops, I messed that up. I meant to say Maximium CPU frequency.
zephiK said:
Errr whoops, I messed that up. I meant to say Maximium CPU frequency.
Click to expand...
Click to collapse
LOL. I too was about to post the same question Thanks !! by the way , do i need to flash it everytime OTA arrives ?
You need to reinstall Franco if it's supported yet that's all
dayanandgp said:
LOL. I too was about to post the same question Thanks !! by the way , do i need to flash it everytime OTA arrives ?
Click to expand...
Click to collapse
If you're on a custom ROM, it is not needed since a backup script is included.
If you're on CM11S, then you will need to reflash it on a OTA (Or even remove the script before being able to accept the OTA) since addon.d is not supported in CM11S.
You need to reinstall Franco if it's supported yet that's all
Click to expand...
Click to collapse
No, flashing a newer/older version of Franco does not touch this script at all.
zephiK said:
If you're on a custom ROM, it is not needed since a backup script is included.
If you're on CM11S, then you will need to reflash it on a OTA (Or even remove the script before being able to accept the OTA) since addon.d is not supported in CM11S.
No, flashing a newer/older version of Franco does not touch this script at all.
Click to expand...
Click to collapse
Okay, youre the boss. I just thought installing an ota update from cm11s will overwrite francos kernel and without francos kernel this vomer tweak wont work. What I basically was saying was you need to have a kernel of franco running after you updated your cm11s again.
shapethelola said:
Okay, youre the boss. I just thought installing an ota update from cm11s will overwrite francos kernel and without francos kernel this vomer tweak wont work. What I basically was saying was you need to have a kernel of franco running after you updated your cm11s again.
Click to expand...
Click to collapse
As I said before, CM11S does not support addon.d scripts so therefore it cannot back up the script. Even if the script was allowed to be backed up, the OTA will most likely not work due to changes being made to /system/ unless using a modified upgrade script to the OTA package.
If the user flashed the script without Franco Kernel, then it will simply just not be able to change certain parts since the path is invalid. And I think its pretty obvious that the user needs Franco Kernel for the script to work. The whole point of the script was to be revolved around Franco Kernel and not any other kernel, its not there to discriminate other kernels but kernel developers have their own paths to certain parameters. Its not uniform throughout the phone.
zephiK said:
As I said before, CM11S does not support addon.d scripts so therefore it cannot back up the script. Even if the script was allowed to be backed up, the OTA will most likely not work due to changes being made to /system/ unless using a modified upgrade script to the OTA package.
If the user flashed the script without Franco Kernel, then it will simply just not be able to change certain parts since the path is invalid. And I think its pretty obvious that the user needs Franco Kernel for the script to work. The whole point of the script was to be revolved around Franco Kernel and not any other kernel, its not there to discriminate other kernels but kernel developers have their own paths to certain parameters. Its not uniform throughout the phone.
Click to expand...
Click to collapse
@zephiK i cant find the link to Vomertweaks anymore in your signature. Is somthing wrong ? Did you delete it ?
I wanted to find out how to disable/delete for future , as it is surviving mahdi OTA's
Check this post for download links:
http://forum.xda-developers.com/showthread.php?p=55150676
Sent from the One
dayanandgp said:
@zephiK i cant find the link to Vomertweaks anymore in your signature. Is somthing wrong ? Did you delete it ?
I wanted to find out how to disable/delete for future , as it is surviving mahdi OTA's
Click to expand...
Click to collapse
I removed it since the links were just all over the place. Refer to nikzDHD's link above ^^.
To uninstall, just flash vt_uninstaller.zip
@zephiK sorry to ask this here, but is it possible for someone to build chroma rom for oneplus one? would be great right?
Old thread.
You're the best, mate
minimale_ldz said:
You're the best, mate
Click to expand...
Click to collapse
Much appreciated and hope you all find it usefull to use. Just saw soniCron released a new script called "hawktail" based on a total different technique using an extreme low timer_rate. Shall try to translate that also next week and if it works ill add this in the thread.
Make a donation link. We love you.
Hi guys! And thanks for your work, @Sickaxis79!
A noob question here. Could these scripts be applied to another governor? Precisely, impulse which is supposed to be similar to interactive?
Sent from my XT1562 using Tapatalk
stazz83 said:
Hi guys! And thanks for your work, @Sickaxis79!
A noob question here. Could these scripts be applied to another governor? Precisely, impulse which is supposed to be similar to interactive?
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
Im afraid that ain't possible. Impulse governor use some different tunables, but you can for example use one interactive script for the big or small cpu and use impulse governor for the other cpu.
Applied the two profiles with latest squids kernel and cm13. Working Great so Far. I guess i have to manually disable touchboost everytime?
Leni_YO said:
Applied the two profiles with latest squids kernel and cm13. Working Great so Far. I guess i have to manually disable touchboost everytime?
Click to expand...
Click to collapse
Yes, its best to disable touchboost. Touchboost is a kernel/rom extra feature. Im also using latest squid kernel with stock rom and dont have this feature and forgot to disable it by default. I will check if i can update the script so its also disables touchboost. Im used to create and edit init.d scripts, but json files k.a. uses are a total different language, but ill try.
Master Mike, how are these scripsts working with optimized init.qcom.post_boot.sh you posted once. Should it be restored to default/stock one or can it all work together? Thanks
minimale_ldz said:
Master Mike, how are these scripsts working with optimized init.qcom.post_boot.sh you posted once. Should it be restored to default/stock one or can it all work together? Thanks
Click to expand...
Click to collapse
No problem. Post_boot script contains the stock settings and applies them first when the phone startup.
Sickaxis79 said:
No problem. Post_boot script contains the stock settings and applies them first when the phone startup.
Click to expand...
Click to collapse
Is KA changing them after boot anyway if it's got some scripts applied?
minimale_ldz said:
Is KA changing them after boot anyway if it's got some scripts applied?
Click to expand...
Click to collapse
Reboot reverts all stock settings unless you enable the checkbox "on boot". It will always first launch your normal stock settings and after the phone finished starting up it will launch the k.a. scripts.In the settings menu you can set the timer how many seconds after boot the scripts will launch.
You can always launch them manually when you dont want to apply them on boot. Just tap on the 2 scripts you imported and it will ask to launch them and finished.
Edit: K.a. overwrites the normal stock settings after youre phone booted temporarily.
Sickaxis79 said:
Reboot reverts all stock settings unless you enable the checkbox "on boot". It will always first launch your normal stock settings and after the phone finished starting up it will launch the k.a. scripts.In the settings menu you can set the timer how many seconds after boot the scripts will launch.
You can always launch them manually when you dont want to apply them on boot. Just tap on the 2 scripts you imported and it will ask to launch them and finished.
Edit: K.a. overwrites the normal stock settings after youre phone booted temporarily.
Click to expand...
Click to collapse
Got it, thanks
Can't import ghostpepper profiles, k.a. says the file is malformed. Great work btw, keep it up.
too bad i have the free version ...
thanks for your work, the script works very well in resurrection rom and optimus kernel, can someone upload the stopperfd script? the KA doesnt work for me creating the script
I've reached over 7hrs SOT on the first run after applying the profiles with 75% Charge left. Good job!
zenez said:
thanks for your work, the script works very well in resurrection rom and optimus kernel, can someone upload the stopperfd script? the KA doesnt work for me creating the script
Click to expand...
Click to collapse
You can also do this using a terminal emulator
Type: "su" (root permission) and "stop perfd".
Sickaxis79 said:
No problem. Post_boot script contains the stock settings and applies them first when the phone startup.
Click to expand...
Click to collapse
Thanks for answering for me.
ViperX85 said:
Can't import ghostpepper profiles, k.a. says the file is malformed. Great work btw, keep it up.
Click to expand...
Click to collapse
BUMP