I have upgraded my galaxy gt i9003 From FROYO to gingerbread, But while upgrading i chose wrong country firmware( i9003JPKP5) instead of I9003ODDLF2_INU. After upgrade incoming calls were blocked,I wasnt getting calls, When any user calls he was getting busy tone.
Later I tried upgrading to ODDLF2 my native country firmware and my phone started to restart every time (Boot Loop)(soft brick i think) .After trying multiple times I wasnt successful. Finally i decided to give my phone to SAMSUNG service center and after couple of days they also said my phone cant be repaired bcoz of overseas version, it needs mother board replacement. Pls help me i m clueless what to do next , Is my phone Ir-repairable ?
njayann said:
I have upgraded my galaxy gt i9003 From FROYO to gingerbread, But while upgrading i chose wrong country firmware( i9003JPKP5) instead of I9003ODDLF2_INU. After upgrade incoming calls were blocked,I wasnt getting calls, When any user calls he was getting busy tone.
Later I tried upgrading to ODDLF2 my native country firmware and my phone started to restart every time (Boot Loop)(soft brick i think) .After trying multiple times I wasnt successful. Finally i decided to give my phone to SAMSUNG service center and after couple of days they also said my phone cant be repaired bcoz of overseas version, it needs mother board replacement. Pls help me i m clueless what to do next , Is my phone Ir-repairable ?
Click to expand...
Click to collapse
how did u flash ur phone?.try flashing xxkpe twice with all the files and then flash ddlf2.also do a complete wipe.did u flash indian rom before going to service centre?u have to flash indian rom before going to service centre.some times bootloop can be cured with simple solutions and sometimes it may be a hardware(motherboard)problem.search xda i9003 bootloop solutions.there are some threads on bootloop problems
njayann said:
I have upgraded my galaxy gt i9003 From FROYO to gingerbread, But while upgrading i chose wrong country firmware( i9003JPKP5) instead of I9003ODDLF2_INU. After upgrade incoming calls were blocked,I wasnt getting calls, When any user calls he was getting busy tone.
Later I tried upgrading to ODDLF2 my native country firmware and my phone started to restart every time (Boot Loop)(soft brick i think) .After trying multiple times I wasnt successful. Finally i decided to give my phone to SAMSUNG service center and after couple of days they also said my phone cant be repaired bcoz of overseas version, it needs mother board replacement. Pls help me i m clueless what to do next , Is my phone Ir-repairable ?
Click to expand...
Click to collapse
LOL at Samsung service center!
U can easily repair it yourself. Just go through some related threads.
I suggest u to root it 1st then flash DDLF2 firmware.
Sent from my GT-I9003.
njayann said:
I have upgraded my galaxy gt i9003 From FROYO to gingerbread, But while upgrading i chose wrong country firmware( i9003JPKP5) instead of I9003ODDLF2_INU. After upgrade incoming calls were blocked,I wasnt getting calls, When any user calls he was getting busy tone.
Later I tried upgrading to ODDLF2 my native country firmware and my phone started to restart every time (Boot Loop)(soft brick i think) .After trying multiple times I wasnt successful. Finally i decided to give my phone to SAMSUNG service center and after couple of days they also said my phone cant be repaired bcoz of overseas version, it needs mother board replacement. Pls help me i m clueless what to do next , Is my phone Ir-repairable ?
Click to expand...
Click to collapse
Next time, if you're not sure/familiar about phone's official updates, please bring it to back to their service centre for further assistance.
Siddhant Shankpal said:
LOL at Samsung service center!
U can easily repair it yourself. Just go through some related threads.
I suggest u to root it 1st then flash DDLF2 firmware.
Sent from my GT-I9003.
Click to expand...
Click to collapse
Thanks for your reply : Now My hand set has FROYO xxKB3 ,down graded by SAMSUNG service center ppl n gave it to me . Can pls tell the steps to follow after this ? i am asking you bcoz i am scared of doing wrong steps which i already did earlier......
pratik_s said:
how did u flash ur phone?.try flashing xxkpe twice with all the files and then flash ddlf2.also do a complete wipe.did u flash indian rom before going to service centre?u have to flash indian rom before going to service centre.some times bootloop can be cured with simple solutions and sometimes it may be a hardware(motherboard)problem.search xda i9003 bootloop solutions.there are some threads on bootloop problems
Click to expand...
Click to collapse
I flashed using ODIN : After i found my phone having some problem I did many time flash and install ddlf2 Boot loop never went but when i switched back to JPkp5 my phone work well only incoming calls wont happen, then only i gave to service centre. Now they down graded to xxkp3, Pls tell me what i need to do !
njayann said:
Thanks for your reply : Now My hand set has FROYO xxKB3 ,down graded by SAMSUNG service center ppl n gave it to me . Can pls tell the steps to follow after this ? i am asking you bcoz i am scared of doing wrong steps which i already did earlier......
Click to expand...
Click to collapse
How much did they charge u for that?
Follow this guide:
http://forum.xda-developers.com/showthread.php?t=1133787
Flash DDLF2, it's best firmware till date.
Any doubt? U can ask here or in that thread.
Good luck!
Sent from my GT-I9003.
Siddhant Shankpal said:
How much did they charge u for that?
Follow this guide:
http://forum.xda-developers.com/showthread.php?t=1133787
Flash DDLF2, it's best firmware till date.
Any doubt? U can ask here or in that thread.
Good luck!
Sent from my GT-I9003.
Click to expand...
Click to collapse
My brother is using this mobile from the last 2 years. Now he's facing some issues with the stock os in his mobile, he asked me to update. I never had any samsung mobile, so I dont have any idea how to unlock the bootloader, how to install cwm recovery etc. If the latest 2.3.5 stock rom is good, then I will flash that. The device's firmware version is showing as DDKA5 and ddkb2. In the OP it says XKPQ was the good one to flash, is it possible to flash on my device. Thank u!
shree.cse said:
My brother is using this mobile from the last 2 years. Now he's facing some issues with the stock os in his mobile, he asked me to update. I never had any samsung mobile, so I dont have any idea how to unlock the bootloader, how to install cwm recovery etc. If the latest 2.3.5 stock rom is good, then I will flash that. The device's firmware version is showing as DDKA5 and ddkb2. In the OP it says XKPQ was the good one to flash, is it possible to flash on my device. Thank u!
Click to expand...
Click to collapse
The link I posted above has all the firmwares with instructions. I recommend u to flash DDLF2 (2.3.6) firmware through odin.
Sent from my GT-I9003 using xda premium
I think you can use any firmware from any country, you just have to flash the correct modem using odin
Siddhant Shankpal said:
How much did they charge u for that?
Follow this guide:
http://forum.xda-developers.com/showthread.php?t=1133787
Flash DDLF2, it's best firmware till date.
Any doubt? U can ask here or in that thread.
Good luck!
Sent from my GT-I9003.
Click to expand...
Click to collapse
Siddhant the Link u specified above is for xxkpn-h..... but current my version is xxKB3 . i think there will be some difference. Can you please link me to flash xxkb3 and upgrade to DDLF2. PLs pls pls......
njayann said:
Siddhant the Link u specified above is for xxkpn-h..... but current my version is xxKB3 . i think there will be some difference. Can you please link me to flash xxkb3 and upgrade to DDLF2. PLs pls pls......
Click to expand...
Click to collapse
DDLF2 link:
http://forum.xda-developers.com/showthread.php?t=1741370
Good luck!
Sent from my GT-I9003.
Hi,
I am from India n also my phone India version.
After installing rom 4.1.1 my phone dosent shows IMEI number its Blank,I cant use my phone to call ,Wifi,Blurtooth i am in big problem pleas any one help me i bought it in 32,000 Ind rupees.
It already unlocked.
sorry for my bad English
Thank you
khalid shah said:
Hi,
I am from India n also my phone India version.
After installing rom 4.1.1 my phone dosent shows IMEI number its Blank,I cant use my phone to call ,Wifi,Blurtooth i am in big problem pleas any one help me i bought it in 32,000 Ind rupees.
It already unlocked.
sorry for my bad English
Thank you
Click to expand...
Click to collapse
try flashing the stock firmware then u shut get ur imei back
Hox Imei problem
Thank bro, but its not happening i call to my Mechanic its not show IMEI aftet installing stock rom of One x.
I think it want a Radio file will it work?
if it work plz give me a link..
plz rply..
" Thank You "
khalid shah said:
Thank bro, but its not happening i call to my Mechanic its not show IMEI aftet installing stock rom of One x.
I think it want a Radio file will it work?
if it work plz give me a link..
plz rply..
" Thank You "
Click to expand...
Click to collapse
I got my Wifi adress back but not the imei
Plz more suggest .
and thank u a lot bro!
Signal receiving is poor....only 2 bar shows while in other phone with same network provider receives full strength..
2g signal strength is ok only 3g having problem
ashuchem said:
Signal receiving is poor....only 2 bar shows while in other phone with same network provider receives full strength..
Click to expand...
Click to collapse
Solve urgent
ashuchem said:
Solve urgent
Click to expand...
Click to collapse
there is no solution for this.
Stock KK 4.4.2 has this issue almost in all mediatek phones.
avi3230 said:
there is no solution for this.
Stock KK 4.4.2 has this issue almost in all mediatek phones.
Click to expand...
Click to collapse
has a solution, submit ur phone to service centre, they will replace pbc of ur phone, if it's in warranty then it will be free of cost.
after flashing stock rom form sp tool i got imei bull please help
prazool007 said:
after flashing stock rom form sp tool i got imei bull please help
Click to expand...
Click to collapse
got the same problem bro. trying since a week.
you got it corrected or its still the same....please share if you got it solved somehow.
Thanks in advance.
Refer to this link
http://forum.xda-developers.com/sparkle-v/help/karbonn-sparkle-nvram-wi-fi-mac-imei-t3362687
I will definitely solve your problem.
hi dev's
I super CID'ed my butterfly and now I'm capable of flashing any firmware right?
My Question is If i flash a firmware or radio developed for other country code [say CID_621 on CID_038] device will it causes any problem?
will i get my mobile data and other stuff work as normal?
I wanted to flash kairi_621 firmware on my CID_038 device... help me !!!
Also I want to back up my stock firware. hoe can i do this ? redirect me to related thread
THANKS IN ADVANCE
Akilanl said:
hi dev's
I super CID'ed my butterfly and now I'm capable of flashing any firmware right?
My Question is If i flash a firmware or radio developed for other country code [say CID_621 on CID_038] device will it causes any problem?
will i get my mobile data and other stuff work as normal?
I wanted to flash kairi_621 firmware on my CID_038 device... help me !!!
Also I want to back up my stock firware. hoe can i do this ? redirect me to related thread
THANKS IN ADVANCE
Click to expand...
Click to collapse
You can backup through TWRP and changing the radio could impact signal reception issue.
Thanks for the help