Hi there,
Long time lurker, first time poster and overall Newb.
I was wondering if anyone could please provide concise instructions on How to restore my phone to stock Galaxy 3 2.2 Firmware.
I have it Rooted (via super one click), OC3 Mod 2.6.32.9 and Kyorarom Infinity (v0.4.1 JPU) currently and am having major issues with stability.
Yet How can I restore it to Factory so that Kies recognises it?
Ive tried the hard reset with the button pressing but it just loops back to oc3 mod. Do i need to "unflash" it somehow or reflash it to a base package?
Please Help.
Regards
Take a look at the stock ROMs here & download suitable one for your region.
BTW, you should have posted in the Q&A subforum.
Yep cheers, ill give that a crack, and copy that on posting elsewhere. tyvm
Hi guys. The link provided above seems to be broken, well the links embedded in them are broken. Can anyone advise me, which stock firmware i need for a Samsung Galaxy 3 bought in New Zealand, and provide an active link?
Thanks a bunch
look over here
Is there a way to tell, which firmware i need as stock from the above link, by looking at my phone physically? Or checking somewhere in settings? Im guessing its region should be North America...
physically theres no chance given
just use the settings -> scroll down -> telephone info
you see the versions here
teariki said:
Is there a way to tell, which firmware i need as stock from the above link, by looking at my phone physically? Or checking somewhere in settings? Im guessing its region should be North America...
Click to expand...
Click to collapse
flashing any of these will allow you to connect to KIES, that will tell you if you need another version
tomsi191 said:
flashing any of these will allow you to connect to KIES, that will tell you if you need another version
Click to expand...
Click to collapse
KIES:
in my former days I had the thought that KIES is really necessary and tried a lot of eclair FW versions from the link above (samfirmware), but none of them established a succesful connection with KIES.
Therefore I upgraded manually with ODIN and uninstalled KIES.
I dont miss a thing until now.
Good luck in finding a fw which connects with KIES.
I read anywhere that XXJG1 or XXJG7 is one the rare fw which could establish a KIES connection. Maybe I am wrong...
A feedback from anyone which of the fw versions can connect to KIES would be very helpfulin this topic.
Cheers
qaysed
Good afternoon guys,
I have a problem with a Samsung Tab 2 GT-P5110 16gb 10.1 tab.... i went to restore to factory settings and it wouldnt load...
I tried using ODIN and stock rom but here is what happens... It loads to device fine and then says updating for about 20 seconds then says deleting and just goes back to the Error screen with Android robot... Tried this a few times before coming here to ask for help...
I am just downloading the P5110xxDMH2_P5110 UK Version from SAM Mobile.... But the guide says to also add PIT File... this is where i am stuck... Do i need this... What is this...
I have Done plenty with my S2 and S3's but never needed to do this on any of them...
Any help is much appreciated and will try to give as much info as required
Cheers
Steve
steved271 said:
Good afternoon guys,
I have a problem with a Samsung Tab 2 GT-P5110 16gb 10.1 tab.... i went to restore to factory settings and it wouldnt load...
I tried using ODIN and stock rom but here is what happens... It loads to device fine and then says updating for about 20 seconds then says deleting and just goes back to the Error screen with Android robot... Tried this a few times before coming here to ask for help...
I am just downloading the P5110xxDMH2_P5110 UK Version from SAM Mobile.... But the guide says to also add PIT File... this is where i am stuck... Do i need this... What is this...
I have Done plenty with my S2 and S3's but never needed to do this on any of them...
Any help is much appreciated and will try to give as much info as required
Cheers
Steve
Click to expand...
Click to collapse
Here's the thread with your answers: http://forum.xda-developers.com/showthread.php?t=2203309
been trying this quite a few times now, someone suggested extracting the PIT and the Bootloader and CSC files from the stock Rom... will this help?
So I had a rooted Galaxy Tab 4 10.1 that I didn't have any backups for and I stupidly changed the DPI of the screen and rebooted the device and it started up in bootloop and I tried recovering it and nothing would work. So I finally settled on the wipe and factory reset, and now it starts up VERY SLOWLY, and the start of the set up for the device shows up but constantly I'm being bombarbed by TOUCHWIZUI has stopped working and 3 other things keep popping up saying they have stopped working. The touch screen barely works.
I have no idea what to do. I have no backups. I am not that familiar with android. I am downloading the stock firmware and am going to try to put it on with odin but I doubt it's going to work.
Can someone give me some advice on what to do? I would REALLY appreciate it.
Sincerely,
SalvelinuxFontinalix
BTW. The tab is the SM-T530NU Canadian (Wifi) version. The firmware I am downloading is the T530NUUEU1ANI1_T530NUXAC1ANI1...
Can I use ODIN to flash this firmware from my PC onto the device or will it be a huge problem if the tablet has been wiped and factory reset and is missing all sorts of information?
Your gonna need to flash the stock rom for the device.
Thank you for your guidance!
zelendel said:
Your gonna need to flash the stock rom for the device.
Click to expand...
Click to collapse
Thank you so much I did what you said. I found the stock rom and "flashed it" I got it back to exactly how it was when I got the tablet! I was unsure how to do it but I learned a bit on my own form the search feature of XDA. I found the stock rom out of a list of many different ones and I found the correct ROM for my country and area and flashed it on with ODIN using my PC and it rebooted and was brand new. I re-rooted it and decided not to alter the DPI of the screen. It's nice enough as is.
Thanks Again! Zelendel! You are a life safer! Oh and BTW...is using ODIN to transfer the stock ROM onto the device considered "flashing"? Or is there some other way people flash devices?
Thanks again I'm so thrilled I don't have a broken device haha. THANKS!!!
Sincerely,
SalvelinuxFontinalix
SalvelinuxFontinalis said:
Thank you so much I did what you said. I found the stock rom and "flashed it" I got it back to exactly how it was when I got the tablet! I was unsure how to do it but I learned a bit on my own form the search feature of XDA. I found the stock rom out of a list of many different ones and I found the correct ROM for my country and area and flashed it on with ODIN using my PC and it rebooted and was brand new. I re-rooted it and decided not to alter the DPI of the screen. It's nice enough as is.
Thanks Again! Zelendel! You are a life safer! Oh and BTW...is using ODIN to transfer the stock ROM onto the device considered "flashing"? Or is there some other way people flash devices?
Thanks again I'm so thrilled I don't have a broken device haha. THANKS!!!
Sincerely,
SalvelinuxFontinalix
Click to expand...
Click to collapse
Yes it is. There are other ways with custom recoveries but that is only for custom rom flashs
HI GUYS IM NEW HERE.
I HAVE GOT PROBLEM WITH MY TABLET. IM STUCK ON SAMSUNG LOGO ITS NOT GOING TO MAIN MENU I TRIED DOWNLOAD FIRMWARE AGAIN BUT NOTHING CHANGED. i took some pictures plz have a look and i will really appreciate if any1 will b able to help. thanks
sjdon007 said:
HI GUYS IM NEW HERE.
I HAVE GOT PROBLEM WITH MY TABLET. IM STUCK ON SAMSUNG LOGO ITS NOT GOING TO MAIN MENU I TRIED DOWNLOAD FIRMWARE AGAIN BUT NOTHING CHANGED. i took some pictures plz have a look and i will really appreciate if any1 will b able to help. thanks
Click to expand...
Click to collapse
Hello
You can download the stock firmware for your device from here (if you don't already have the correct one) and follow the instructions to flash it. Also, factory reset your tab from recovery after flashing the firmware correctly, otherwise it will not boot.
Good luck!
Howdy
Not sure where to start asking for help. Here is where I'm at :
Twrp (2.8.6?) works great... Too good
Used it to create a complete Nandroid of my original (jb) system.. I backed up everything I could see.
Installed a blisspop rom that also worked.
Decided to return to the original system .
In twrp did factory reset, advanced wipe of dalvic cache, data, and system each time.
Did restore with md5 check. 6 md5's all good, no failures
Restore from Nandroid file on ext micro sd. Everything successful. No fails reported anywhere.
Reboot. System tries to start but returns to twrp instead of booting to system. Have done this 3 times with same results.
My stock was something like UEUCOI1.
I hate to have to start over but will if that's the best I can do. If so I don't know where to proceed from here. Where to locate a stock room
Any suggestions are much appreciated,
Best regards,
Dr Dan
Jonathan Kang said:
Ok, I have seen what you have done. You installed and did too many things at once on TWRP! If you do that you will get a bootloop or a soft-brick which is very common. If I ever got stuck I just downloaded Samsung Smart Switch for Windows.
1st: Turn off your tablet/phone.
2nd: Press More then Emergency software recovery and initialization.
3rd: Press Device initialization.
4th: Take off your cover of your tablet/phone and see the sticker for the Model Number and the Serial Number and type it in.
5th: Sit back and wait for 10 - 120 minutes and it should be done!
(Not all steps have been written down in this post. You'll see it in the Smart Switch app for Windows.)
That should do it!
Hope I helped,
Jonathan
Click to expand...
Click to collapse
Thank you very much Jonathan. Your words are more comforting than you know and much appreciated. It'll be late today before I've time to test this out but I'll get back with you either way.
Best regards,
Dr Dan :victory:
drdan123 said:
Thank you very much Jonathan. Your words are more comforting than you know and much appreciated. It'll be late today before I've time to test this out but I'll get back with you either way.
Best regards,
Dr Dan :victory:
Click to expand...
Click to collapse
Hi Jonathan,
I got the back cover off and found something that I suspect is the serial number. It is SNR32CB01G4SN. Does that seem right to you? Inside the back cover (plastic) is KIGDSW1102 504B. Regardless it never asks for a serial number.
Your instructions call for a model number. I could not find one inside the back cover. The smart switch PC app is calling for a model name. There is no place for a serial number. The app will not accept GT-N8013 in the name space nor will it accept Samsung Galaxy Note 10.1.
I don't know what other info I can give it. What do you recommend?
Thanks for helping me get started,
Dr Dan
drdan123 said:
Hi Jonathan,
I got the back cover off and found something that I suspect is the serial number. It is SNR32CB01G4SN. Does that seem right to you? Inside the back cover (plastic) is KIGDSW1102 504B. Regardless it never asks for a serial number.
Your instructions call for a model number. I could not find one inside the back cover. The smart switch PC app is calling for a model name. There is no place for a serial number. The app will not accept GT-N8013 in the name space nor will it accept Samsung Galaxy Note 10.1.
I don't know what other info I can give it. What do you recommend?
Thanks for helping me get started,
Dr Dan
Click to expand...
Click to collapse
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.
drdan123 said:
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.
Click to expand...
Click to collapse
I actually starting to think that twrp is just not the right recovery for Note 10.1. When I was trying to flash the original software it happened to me too. It just has a bug or insufficiency to install system on some roms. Here is what I did:
-Installed gnabo rom for a system base. I STRONGLY SUGGEST THAT YOU FLASH THE SAME BASED ROM WITH THE ROM YOU WANT TO FLASH.
-Wipe everything EXCEPT system.
-Flash the rom you want. In my case it was the stock rom.
Well, not a proper, solid solution but if it's working, who cares?
Hi furkey,
I also saw the gnabo room. I got 6 files...
Gnabo room v8
N801x+v6. Zip
Update-supersu-v1. 99.zip
Gt-n8013-kk-WiFi -fix .zip
Stock-gt-n8000-leaked-kk-boot.img-cwr-installer.zip (really a convoluted name?)
V8-final-fix.zip
I was unable to get the kernal. Each attempt sent me to the playstore to install Mega drive. I have it already installed and am fully subscribed but...
I wrote Mikyno (the creator of gnabo) asking for help but never heard back.
The morass of gnabo files is bewildering. I don't know what I need and don't need and how or with what tools to load them.
I'm pretty sure I need the kernal as I understand it the kernal is the interface between hardware and software. Without it and without some guidance or support from the creator I gave up.
Then I spent a couple of days trying to locate a 4.1,2 stock firmware (ready to give up on roms altogether) . There were several published but all links have expired and the posters do not respond. Sammobile requires a puzzle be solved to register. I spent several hours trying to make my tablet move a puzzle piece. No success.
Finally I gave up and reloaded the blisspop I'd installed to start this journey. It is a bit flakey at times but it's all I have. I cannot go forward and cannot go backward.
Any directions you can send my way are much appreciated.
Dr Dan
Hello,
I too am experiencing this. I really can't throw this device away. I have even tried a stock rom from high on android. Downloaded and used odin to flash to no avail. I hope anyone will have an answer or another stock rom or anything!
Thank you!
Tony
Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan
drdan123 said:
Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan
Click to expand...
Click to collapse
Dr. Dan!
of course! here's the link:
http://rootgalaxynote.com/galaxy-note-10-1-2/how-to-unrootunbrick-galaxy-note-10-1-factory-firmware/
the link to download the rom is here:
http://stockroms.net/file/GalaxyNote10.1/N8013/N8013UEALI3_N8013XARALI3_XAR.zip
i have not tried the blisspop rom. I believe I was using the latest twrp.
Just do what I said in the first place. It worked out for me and I have a strong feeling that it will work out for you too (well, hopefully). You can use just the main rom file, not thinking others are required too. Or you can simply flash the tab s sensation rom instead of gnabo rom. It can be found in this page: http://forum.xda-developers.com/galaxy-note-10-1/development/gnabo-rom-x-tab-s-feature-t3164779. Notify me if you succeed or not.
And do not forget to mention me otherwise I may not notice that you have wroten to me.
badteddy said:
Dr. Dan!
of course! here's the link:
http://rootgalaxynote.com/galaxy-note-10-1-2/how-to-unrootunbrick-galaxy-note-10-1-factory-firmware/
the link to download the rom is here:
http://stockroms.net/file/GalaxyNote10.1/N8013/N8013UEALI3_N8013XARALI3_XAR.zip
i have not tried the blisspop rom. I believe I was using the latest twrp.
Click to expand...
Click to collapse
Hi Tony,
Thanks much for the links. That site has always given me grief. When I select download it simply takes me back to the same page to select download again etc. This time your 2nd link worked! Great day. I got the file, unzipped it, removed the ". Md5" extension and ran the md5 Checker. It failed. I hope you checked yours before installing it. Is there any other place I can get that file. Upon returning to the same page to dl the file again I got stuck back in the old circle I have always found myself in.
On anther note; I think furkey is stepping in to help. He wants us to try the gnabo rom. It looks good but there are 7 files needed. I don't know if furkey was referring to you or to me in his last post. I'll ask and see. I think he can easily clear the air on what is needed to load gnabo.
I also am using the latest twrp (2.8.6 I think).
I'll get back when I learn more.
Dr Dan
furkey said:
Just do what I said in the first place. It worked out for me and I have a strong feeling that it will work out for you too (well, hopefully). You can use just the main rom file, not thinking others are required too. Or you can simply flash the tab s sensation rom instead of gnabo rom. It can be found in this page: http://forum.xda-developers.com/galaxy-note-10-1/development/gnabo-rom-x-tab-s-feature-t3164779. Notify me if you succeed or not.
And do not forget to mention me otherwise I may not notice that you have wroten to me.
Click to expand...
Click to collapse
Hi furkey,
Thanks much for stepping in. I'm assuming you mean me instead of (possibly in addition to) badteddy.
I'd never heard of the tab s rom. It looks really good. The gnabo scares me a little. My concern is you likely have flashed more support software than I. What works for you may well crash mine.
The tab s rom was given without an md5 so I can only hope I got a good download.
Once I've rebuilt my courage I'll give it a go and report back to you (and badteddy) with results.
Best regards,
Dr Dan
I don't recall a stylus on the tab s. Does this rom support the active stylus? Do you know if there is an addon that will include support of not? I'll also ask the creator but I've yet to hear back from any rom maker save the sweet lady that made the blisspop rom.... Needy blonde.
drdan123 said:
Hi furkey,
Thanks much for stepping in. I'm assuming you mean me instead of (possibly in addition to) badteddy.
I'd never heard of the tab s rom. It looks really good. The gnabo scares me a little. My concern is you likely have flashed more support software than I. What works for you may well crash mine.
The tab s rom was given without an md5 so I can only hope I got a good download.
Once I've rebuilt my courage I'll give it a go and report back to you (and badteddy) with results.
Best regards,
Dr Dan
I don't recall a stylus on the tab s. Does this rom support the active stylus? Do you know if there is an addon that will include support of not? I'll also ask the creator but I've yet to hear back from any rom maker save the sweet lady that made the blisspop rom.... Needy blonde.
Click to expand...
Click to collapse
It's not a Tab S rom. It's a Note 10.1 rom with Tab S features in it like new touchwiz, file explorer and etc. Your s-pen will work on this rom.
drdan123 said:
Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan
Click to expand...
Click to collapse
OK. I tried out the Tab S Sensation Rom. It is outstanding. Here is a link that shows what I did,
http://forum.xda-developers.com/showpost.php?p=67440486&postcount=342
Furkey recommended it and he was spot on!
I was never able to dl the link you gave but I did find the file and checksum on a different mirror. I finally got it but have no use for it as the tab s room works better than the stock.
Enjoy,
Dr Dan
furkey said:
It's not a Tab S rom. It's a Note 10.1 rom with Tab S features in it like new touchwiz, file explorer and etc. Your s-pen will work on this rom.
Click to expand...
Click to collapse
You are the greatest. That rom is everything you said it would be. Wish I'd found it 2 years ago.
Best regards,
Dr Dan
drdan123 said:
You are the greatest. That rom is everything you said it would be. Wish I'd found it 2 years ago.
Best regards,
Dr Dan
Click to expand...
Click to collapse
You're welcome mate. I am glad that worked out for you
drdan123 said:
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.
Click to expand...
Click to collapse
Hello, drdan123,
I am Jonathan Kang, and I'm using my secondary account.
So try to use Samsung Kies because it probably supports older devices. Smart Switch is for the newer devices. I hope I helped!