Related
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
This is an unofficial CyanogenMod 12.1 ROM for the LG G Pad 7.0 (WiFi) with a very shiny CAF-based kernel.
All of the basics should be working (video playback, WiFi, etc.).
Installation instructions:
Download ROM and save to sdcard
Boot into TWRP
Perform a full backup
Factory reset, wipe cache and system
Flash ROM, Flash GAPPS (Optional)
Reboot
Enjoy! (Optional)
Source code:
Kernel (cm-12.1 branch): https://github.com/sultanxda/android_kernel_lge_v400
Local manifest (contains the rest of the sources): https://github.com/sultanxda/android/blob/master/v400/cm-12.1/local_manifest.xml
Credits (in no particular order):
The CyanogenMod team
CyanogenMod contributors
CAF
bangprovn
invisiblek
timmytim
If I forgot you, slap me and force me to use an iPhone 4 running iOS 8
Downloads:
ROM: https://www.androidfilehost.com/?w=files&flid=29692&sort_by=date&sort_dir=DESC
XDA:DevDB Information
CAF CyanogenMod 12 for V400, ROM for the LG G Pad 10.1
Contributors
Sultanxda
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Created 2015-04-05
Last Updated 2018-01-20
Changelog:
October 13, 2015:
ROM:
*Switched to stable CyanogenMod branch
*Latest upstream (stable/cm-12.1-YOG7D) CyanogenMod changes
*Removed built-in superuser (use SuperSU instead)
*Disabled strict mode (fixes the flashing red borders that occur randomly, especially in Chrome)
*SELinux is now enforcing
*Changed I/O scheduler to Deadline
*Switched back to old WiFi firmware and configuration
Kernel:
*Updated CPU input boost driver (better performance now)
*Enabled CPU boosting on thread migration (gives much better performance)
*Switched back to old WiFi drivers
*Improved eMMC performance
*Added patches for SELinux
July 23, 2015:
ROM:
*Latest upstream CyanogenMod changes
*ROM is now compressed with LZMA (ROM zip is 50MB smaller as a result, and takes much less time to upload/download)
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.26
*Updated prima WiFi drivers from CAF LA.BF.1.1.1_rb1.26
*Enabled dynamic FPS feature for the display (this will reduce the power consumed by the display in some usecases)
July 6, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Synced audio HAL with CAF LA.BF.1.1.1_rb1.25
*Synced display HAL with CAF LA.BF.1.1.1_rb1.25
*Updated WCNSS WiFi configuration from V40020a update
*Updated WCNSS WiFi firmware from V40020a update
*Updated venus video firmware from V40020a update
*Reduced time needed to optimize apps at boot
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.25
*Updated prima WiFi drivers from CAF LA.BF.1.1.1_rb1.25
*Vibrator is disabled while recording videos (so the noise can't enter videos)
*Misc. fixes
June 14, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Synced audio HAL with CAF LA.BF.1.1.1_rb1.24
*Synced display HAL with CAF LA.BF.1.1.1_rb1.24
*Synced media HAL with CAF LA.BF.1.1.1_rb1.24
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.24
May 24, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Synced display and media HALs with CAF LA.BF.1.1.1_rb1.22
*Two CPUs are always kept online instead of one (better performance and unnoticeable change to battery life)
*Switched to vanilla CAF LA.BF.1.1.1_rb1.22 audio HAL (better audio quality)
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.22
*Updated core logic of the CPU input boost driver again (less aggressive and smarter now)
*Added some updates to the Interactive CPU governor
May 9, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Updated Adreno graphics libraries
*Updated display and media HALs from CAF
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.21
*Updated core logic of the CPU input boost driver
*Fixed high CPU load caused by uninterruptible threads (myfluxi)
April 22, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Android 5.1.1
*Increased speaker volume
*Updated display HAL to CAF LA.BF.1.1.2_rb1.18
*Added proper color-calibration interface for LiveDisplay (invisiblek)
*Disabled active fstrim (invisiblek)
Kernel:
*Synced with CAF LA.BF.1.1.2_rb1.18
*Added CPU input boost driver I wrote myself (makes the device feel smoooooth)
*Removed zRAM
*Disabled DSI burst mode (caused graphical glitches and made the display feel laggy)
*Limited vibrator to max of 1865mV (previous max of 3100mV was insane)
April 16, 2015:
ROM:
*CyanogenMod 12.1
*Android 5.1
*Updated Adreno graphics libraries from the official 20A Lollipop update
Kernel:
*Rebased kernel to CAF LA.BF.1.1.2_rb1.17
*Added back magnetic-cover support
*Added back dt2w support
April 5, 2015:
ROM:
*Initial release
Kernel:
*Initial release of kernel based on CAF LA.BF.1.1.1_rb1.17
Reserved
Like I said in the OP, some kernel features may be missing (as I removed a bunch of stuff that my dad will never use). I'm not sure if you guys had F2FS before, but this build does not have F2FS. Have fun.
Thanks for you work @Sultanxda , this build is much smoother than bangprovn's, nearly everything works, camera works, wifi is stable, performance is better
Awesome , downloading .... It's still not the CM12.1, right? Would not be stable yet? Why on my S4 also is not with CM 12.1...
thank Sultanxda : D: D: D
Does it have support for the magnetic smart case?
Thanks btw
Smoth Rom, but tap to wake seems to not work
---------- Post added 6th April 2015 at 12:04 AM ---------- Previous post was 5th April 2015 at 11:59 PM ----------
izzet3838 said:
Does it have support for the magnetic smart case?
Thanks btw
Click to expand...
Click to collapse
Mine doesn't work.
Touch unlock does not work.
Netflix does not run.
Kernel max, mini does not change.
My first try to modify my tablet was today with this ROM.
After a little time playing with it, I noticed that the screen brightness does not change, so it is a little tiring for the eyes.
I hope these little things to be fixed in the future.
But thanks for the effort to get the CM on our little tablets!
one question
Sorry for question) But tell whether another update cm 12.1 for our violent tablet?
There is another kernel for this rom.
evripidis said:
My first try to modify my tablet was today with this ROM.
After a little time playing with it, I noticed that the screen brightness does not change, so it is a little tiring for the eyes.
I hope these little things to be fixed in the future.
But thanks for the effort to get the CM on our little tablets!
Click to expand...
Click to collapse
Screen brightness can change. I just checked it and it works.
gusmao100 said:
There is another kernel for this rom.
Click to expand...
Click to collapse
No... Using a different kernel anyway wouldn't make sense, as you'd lose all the benefits of the CAF kernel.
I was preparing to install this rom more just received the official update to Android 5.0.2. I will test for a few days and evaluate whether it is the best option.
Sultanxda said:
Screen brightness can change. I just checked it and it works.
Click to expand...
Click to collapse
Mine doesn't work...
What can I do?
I have checked this many times...
The brightness change through Bs player but inside the OS.
Update
After a clean install the problem solved
installed the official update to Android 5.0.2, but now as rootear ???
gusmao100 said:
installed the official update to Android 5.0.2, but now as rootear ???
Click to expand...
Click to collapse
Activate Developer options (opções de desenvolvedor) , settings (configurações), Developer options, root access (acesso root), select only apps or apps and adb.
braulio_holtz said:
Activate Developer options (opções de desenvolvedor) , settings (configurações), Developer options, root access (acesso root), select only apps or apps and adb.
Click to expand...
Click to collapse
I'm talking about the official update today towelroot does not work !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gusmao100 said:
I'm talking about the official update today towelroot does not work !!!
Click to expand...
Click to collapse
Here is better http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995
XDA:DevDB Information
CyanogenMod 12.1 UNOFFICIAL, ROM for the Moto G
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo and Device Tree for Falcon is here Github repo. Feel Free to Contribute and Help in this Project.
-Screenshots:
-Downloads:
-.CyanogenMod 12.1 UNOFFICIAL - Motorola Moto G
-Differences with the official Nightlies:
-3.4.108 Kernel.
-Compatibility with KitKat bootloader(There may be flickering on the screen, is solved by blocking the phone and unlocking it).
-Tweaked Kernel.
-SELinux it's in permissive mode.
-Issues/Bugs:
-Same of CM Nightlies.
-Sources:
-https://github.com/Krizthian
-https://github.com/CyanogenMod
-Thanks to:
-CyanogenMod Team.
-Flashhhh
-KonstaT.
-Alberto97
XDA:DevDB Information
CyanogenMod 12.1 UNOFFICIAL, ROM for the Moto G
Contributors
Krizthian, Krizthian
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-04-06
Last Updated 2015-04-05
Changelogs:
20150705:
-android: Sync with the lastest CM-12.1 Sources.
-android_kernel_motorola_msm8226: mmc: Disable crc check.
-android_kernel_motorola_msm8226: power: msm_battery: increase battery check interval from 5 to 15 seconds.
-android_kernel_motorola_msm8226: timekeeping: fix timeout calculations into ktime_get routine.
-android_kernel_motorola_msm8226: timer: optimize apply_slack().
-android_kernel_motorola_msm8226: Makefile: Make use of pipe flag.
-android_kernel_motorola_msm8226: sched: Disable GENTLE_FAIR_SLEEPERS.
-android_kernel_motorola_msm8226: sched: msm8226: overclock GPU to 533MHz.
-android_kernel_motorola_msm8226: msm8226: underclock GPU to 100MHz.
-android_kernel_motorola_msm8226: msm8226: Reclaim RAM from loggers.
-android_kernel_motorola_msm8226: PM / devfreq: Check for GPU busy time before sending the sample.
-android_kernel_motorola_msm8226: cpufreq: Optimize cpufreq_frequency_table_verify().
-android_kernel_motorola_msm8226: Added optimized ARM RWSEM algorithm.
20150705:
-android: Sync with the lastest CM-12.1 Sources.
-android_kernel_motorola_msm8226: Revert msm-camera: move target checks to userspace(Fix camera).
-android_kernel_motorola_msm8226: security: force SELinux permissive mode.
-android_kernel_motorola_msm8226: clockchips: Add FEAT_PERCPU clockevent flag.
-android_kernel_motorola_msm8226: writeback: increase bdi_min_ratio to 5.
20150704:
-android: Sync with the lastest CM-12.1 Sources.
-android_kernel_motorola_msm8226: Kernel updates(f2fs, patched to 3.4.108).
20150614:
-android: Sync with the lastest CM-12.1 Sources.
-android_device_motorola_falcon: Use 536870912 for zRAM.
20150525:
-android: Sync with the lastest CM-12.1 Sources.
-android_device_motorola_msm8226-common: Doze it's working(Ambient Display, and more...).
20150501:
-android: Sync with the lastest CM-12.1 Sources.
20150429:
-android: Sync with the lastest CM-12.1 Sources.
-android_kernel_motorola_msm8226: Add some Cortex-A7 Optimizations.
-android_kernel_motorola_msm8226: qce50: Update clock vote for improved performance.
-android_kernel_motorola_msm8226: timer: optimize apply_slack().
-android_kernel_motorola_msm8226: security: force SELinux permissive mode.
-android_kernel_motorola_msm8226: block: cfq: merge tweaked tunables..
-android_kernel_motorola_msm8226: writeback: increase bdi_min_ratio to 5.
-android_kernel_motorola_msm8226: clockchips: Add FEAT_PERCPU clockevent flag.
-android_kernel_motorola_msm8226: vfp: makefile: optimize.
-android_kernel_motorola_msm8226: Optimize slub by not using fair sleepers.
20140423:
-android: Sync with the lastest CM-12.1 Sources.
-android: Now the Android version it's 5.1.1.
-android_device_motorola_falcon: Update XT1032 Fingerprint.
-android_device_motorola_msm8226-common: use shorter name of charger service.
-android_kernel_motorola_msm8226: Patched to 3.4.107 Kernel.
20150417:
-android: Sync with the lastest CM-12.1 Sources.
-android_device_motorola_msm8226-common: Build libqsap_sdk from source.
-android_kernel_motorola_msm8226: cpufreq: cpu-boost: Export cpu boost status.
-android_kernel_motorola_msm8226: cpufreq: performance: expose load to cpufreq.
20150416:
-android: Sync with the lastest CM-12.1 Sources.
-android_kernel_motorola_msm8226: drivers: mmc: disable CRC.
-android_kernel_motorola_msm8226: Update CONFIG_LOCALVERSION.
20150415:
-android: Sync with the lastest CM-12.1 Sources.
-android_device_motorola_falcon: Use again 268435456 for zRAM.
-android_kernel_motorola_msm8226: power: enable quickwakeup driver.
-android_kernel_motorola_msm8226: sched: cpu_power: enable ARCH_POWER.
20150411:
-android: Sync with the lastest CM-12.1 Sources.
-android_device_motorola_falcon: Change zRAM size from 368435456 to 536870912.
-android_kernel_motorola_msm8226: Update CONFIG_LOCALVERSION.
-android_kernel_motorola_msm8226: increase pet time.
-android_kernel_motorola_msm8226: Enable pipe flag.
-android_kernel_motorola_msm8226: Fix high load average from uninterruptible waits.
-android_kernel_motorola_msm8226: Fix a possible memory leak in cond_read_node().
-android_kernel_motorola_msm8226: Reclaim RAM from loggers.
20150410:
android: Sync with the lastest CM-12.1 Sources.
-android_kernel_motorola_msm8226: New Kernel source, patched to 3.4.106(Based on Alberto97 AOSP 5.1 Kernel).
-android_kernel_motorola_msm8226: Add again CONFIG_LOCALVERSION for the Kernel update.
-android_kernel_motorola_msm8226: Add again support to XZ Ramdisk for the Kernel update.
-android_kernel_motorola_msm8226: Add again support to LZ4 Ramdisk for the Kernel update.
-android_kernel_motorola_msm8226: Add again support to Reclaim virtual memory from each subsystem for the Kernel update.
-android_kernel_motorola_msm8226: Enabled again XZ decompress for the Kernel update.
-android_kernel_motorola_msm8226: Enabled again LZ4 decompress for the Kernel update.
-android_packages_inputmethods_LatinIME: Replace for cm-12.0 branch(Possible fix to AOSP Keyboard FC).
20150409:
-android: Sync with the lastest CM-12.1 Sources.
-android_device_motorola_msm8226-common: Revert "msm8226-common: Adjust min-free value for lowmemorykiller".
-android_kernel_motorola_msm8226: Clean kernel source.
20150408:
-android: Sync with the lastest CM-12.1 Sources.
-android_device_motorola_msm8226-common: Don't reverted LowMemoryKillValues.
-android_kernel_motorola_msm8226: CFQ now it's enabled per defect.
20150407:
-android: Sync with the lastest CM-12.1 Sources.
20150406:
-android: Sync with the lastest CM-12.1 Sources.
-android_device_motorola_falcon: Compatibility with KitKat Bootloader(Test Please).
-android_kernel_motorola_msm8226: Add CONFIG_LOCALVERSION.
-android_kernel_motorola_msm8226: Add support to XZ Ramdisk.
-android_kernel_motorola_msm8226: Add support to LZ4 Ramdisk.
-android_kernel_motorola_msm8226: Reclaim virtual memory from each subsystem.
-android_kernel_motorola_msm8226: Enable XZ decompress.
-android_kernel_motorola_msm8226: Enable LZ4 decompress.
Reserved.
Thanks. Waiting for download links.
91% .
And..... It's ready, my first UNOFFICIAL build of CyanogenMod 12.1.
Download link:
https://www.androidfilehost.com/?fid=95916177934551392
Morning:
-Bigger zRAM and support for KitKat Bootloader users(TEST PLEASE!).
Greatings.
Can I dirty flash over an official cm12?
Sent from my B1-730 using XDA Free mobile app
Reserved.
daniel910821 said:
Can I dirty flash over an official cm12?
Sent from my B1-730 using XDA Free mobile app
Click to expand...
Click to collapse
I not recommended.
Greatings.
one more 5.1..
Grabbing for testage.
I've been looking for clean CM12.1 since the release of 5.1.
Me too. I will test it tonight. If it's speedy and stable like AOSP 5.1 then I will keep it
I just wrote my bug reports... Please review it.
Thank you. (Sorry for my bad Grammar)
New BUILD Ready!(20150406).
Changes:
-android: Sync with the lastest CM-12.1 Sources.
-android_device_motorola_falcon: Compatibility with KitKat Bootloader(Test Please).
-android_kernel_motorola_msm8226: Add CONFIG_LOCALVERSION.
-android_kernel_motorola_msm8226: Add support to XZ Ramdisk.
-android_kernel_motorola_msm8226: Add support to LZ4 Ramdisk.
-android_kernel_motorola_msm8226: Reclaim virtual memory from each subsystem.
-android_kernel_motorola_msm8226: Enable XZ decompress.
-android_kernel_motorola_msm8226: Enable LZ4 decompress.
Download:
https://www.androidfilehost.com/?fid=95916177934551673
Greatings.
Working fine on my xt1033.
Note1: tested on secondary rom using multirom.
Note2: Finally have sources downloaded to make my build
Sent from my Moto G using XDA Free mobile app
This new build so good. Stable dan smooth.
I don't experience anymore about USSD error or FC from AOSKP Keyboard.
LOve this build. Thank you for your hardwork. Thumbs up!! :good::good:
Work great
build cm 12.1 working awesome in my xt1032, keep it !
In SIM Toolkit menu, you will get both options for SIM Toolkit 1 and SIM Toolkit 2.
And in App Drawer there is SIM Toolkit 2 too.
I hope in the next build, you can erase/delete that SIM Toolkit 2 in App Drawer.
Sorry for my bad English...
New BUILD Ready!(20150407).
Changes:
-android: Sync with the lastest CM-12.1 Sources.
Download:
https://www.androidfilehost.com/?fid=95916177934552115
Greatings.
Thanks so much!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM/KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will laugh at you.
* BOOM! goes the dynamite
*/
Hi XDA community, we are proud to present our vision of LineageOS with features that we think are useful. Hope you enjoy our builds as much as we do.
The main goal of Nuclear Team is to provide a clean and fast ROM with nice and useful features.
[ ROM / KERNEL ] [ NOUGAT ] >< [ 7.1.2_r29 ] NucleaRom >< [V5.0.1-FINAL]
//2017-11-30//
By ® NuclearTeam ®
• Unified for both devices OP3 and OP3T in the same zip
• Based on LineageOs 14.1
• Android version 7.1.2_r29
• Custom kernel included (Radioactive kernel) based on sultanXda's kernel with spectrum app support with preconfigured profiles
• Built with snapdragon clang and ubernaro 4.9.4 for rom and
linaro 7.1.1 kernel toolchains
• SultanXda's device tree and vendor
• Optimized for fast app opening and disabled lot of debugging
• Nuclear Settings
• Customizable status bar (clock position, date, network indicators, battery style...)
• Gestures Anywhere
• Switch To Hide SuperSu from Status Bar
• Qualcomm Assertive Display
• Network traffic indicator
• Three finger swipe to screenshot
• Show cpu info
• Dt2s everywhere on lockscreen
• Options to modify dash board (number of columns... Etc)
• Option to disable warning color on low battery
• Full oms7 support (use substratum to theme the rom)
• Omniswitch
• Option to reset battery history stats
• Pocket detection for power button and screen off gestures
• Enhanced dialer with smart call feature
• MicroG and signature spoofing support for use the rom without gapps
• Enhanced system animation scale sliders in developer options
• Screen pinning selection in recents
• Show current and new version in package installer
• Oos camera with ALL stock options working (RAW, HDR... etc) included
• Snapdragon camera from sultanXda's rom with all the goodies
• Option to disable screenshot sound
• More volume steps
• Option to unlock secured lockscreen (pin/pattern...etc) with fingerprint after reboot
• Substratum and Magisk tile in dashboard if is user installed
• Enhanced gps from SultanXDA cm14.1 device tree
• Qs tiles animations and row/columns configuration
• Alert slider modified with more options
• Wakeblock app support and baked into rom's zip ( more info Here ) all credits for @GioBozza
• Launcher3 with Google now gesture and icon support
• Exclusive NucleaRom wallpaper app
• AOSPA color engine
• All LineageOS goodies
-KNOWN BUGS: You must set a pin/pattern before setting up a fingerprint otherwise settings will fc.
-If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
if you flash any mod or whatever besides root please don't subbmit any bug report
First install: If you come from another rom or another Android version
× Read the whole op and make sure that you understand what is written here
× Make a nandroid backup (optional but always recommended)
× Download rom
× Download 7.1 arm64 Gapps
× Wipe system,data,cache,dalvik
× Flash latest firmware for your device
× Flash ROM
× Flash GApps (optional)
× Flash your preferred root method (optional)
× Reboot
Updating:
IMPORTANT NOTICE : Clean flash is highly recommended for final version due to device tree changes,, isn't mandatory but if you don't clean flash and encounter any bug you must clean flash before reporting anything.
× Flash ROM and latest firmware if any
× Reboot
Have fun....
Enjoy!
LineageOS
SultanXda
ResurrectionRemix
Aicp
Aospextended
XDA
Flar2
Grarak
Koenkk
nvertigo
GioBozza
Nuclear Team & testers
And a very special thanks to TugaPower
Anyone I might have forgotten (please let me know)
Main devs are @Moludo, @lozo2010, @Ordenkrieger and @acuicultor is the kernel Dev.
Telegram support chat:HERE
If you want to buy us a beer/coffee you can donate Here all donations will serve to improve the rom.
Thanks to all donors!!!!
@AlkaliV2
Please when do a donation tell your xda nickname in paypal message so i can give you proper credits here. Thanks.
XDA:DevDB Information
NucleaRom, ROM for the OnePlus 3T
Contributors
acuicultor
Source Code: https://github.com/OneRomOne-N
ROM OS Version: 7.x Nougat
ROM Firmware Required: OOS STABLE 4.5.1
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 5.0.1-FINAL
Stable Release Date: 2017-11-30
Created 2017-01-25
Last Updated 2017-11-30
CHANGELOG
3.0.4
Initial release
3.0.6
Synced with LineageOS source
Added various options for customize dash board
Compiled with snapdragon clang and ubernaro toolchain.
3.0.7
Synced with LineageOS source
Kernel updated with oos n source3.0.7
Synced with LineageOS source
3.0.8
Synced with LineageOS source
Kernel updated with latest LineageOS commits
3.0.9
Synced with LineageOS source
Kernel updated with latest LineageOS commits
Added enhanced dialer and omniswitch
3.1.0
Synced with LineageOS source
Kernel updated to latest version
3.1.1
Synced with LineageOS source
Kernel updated to latest version
Reorganization of Nuclear tweaks
3.1.5
Synced with LineageOS source
Kernel updated to latest version
Reorganization of Nuclear tweaks again lol
3.1.6
Synced with LineageOS source
Kernel updated to latest version
3.1.8
Synced with LineageOS source
March security patch, 7.1.1 blobs and more
Kernel updated to latest version
3.2.0
Synced with LineageOS source
Kernel updated to latest version
Added Rootless Oms7 support
3.2.1
Synced with LineageOS source
Kernel updated to latest version
3.2.3
Synced with LineageOS source
Kernel updated to latest version
Rom and kernel compiled with UberTC 4.9.4 and snapdragon llvm clang
Fixed uncompatibility with multirom
3.2.5
Synced with LineageOS source
Kernel updated to latest version
Tweaked for better battery life without losing performance
3.2.6
Synced with LineageOS source
Kernel updated to latest version
3.2.8
Synced with LineageOS source
3.2.9
Synced with LineageOS source
Added own Nuclear setup wizard [Thanks @OrdenKrieger]
3.3.1
Synced with LineageOS source
3.3.2
Synced with LineageOS source
Kernel updated to latest version (rebased with cm14.1 branch)
Upgrade to Android version to 7.1.2_r2
Update to April's security patch
3.3.3
Synced with LineageOS source
Kernel updated to latest version
3.3.4
Synced with LineageOS source
Kernel updated to latest version
3.3.5
Synced with LineageOS source
Added option to hide roaming icon in statusbar
Kernel updated to latest version
3.3.6
Synced with LineageOS source
Added pocket detection for power button
Added optimizations for faster app opening and smoother experience
3.3.7
Synced with LineageOS source
Added MicroG and signature spoofing support for use the rom without gapps
Added enhanced system animation scale sliders in developer options
3.3.8
Synced with LineageOS source
Added gsm/lte hack from SultanXda's cm14.1
3.3.9
Synced with LineageOS source
Kernel updated to latest version
Upgrade to Android version to 7.1.2_r8
Update to May's security patch
Added screen pinning in recents
Added the option to show current and new version in package installer
Added real time scheduling to frame and core repos for smoother ui
3.4.1
Synced with LineageOS source
Reverted real time scheduling to frame and core repos for smoother ui
Updated oms7 commits
3.4.2
Synced with LineageOS source
Kernel updated to latest version
3.4.4
Synced with LineageOS source
Kernel updated to latest version
Added fix for d2ts in home button
3.4.6
Synced with LineageOS source
Kernel updated to latest version
Added Spectrum support for preconfigured kernel profiles
3.4.9
Synced with LineageOS source
Kernel updated to latest version
Added multihal capability and oos cam , credits to nvertigo
3.5.0
Synced with LineageOS source
3.5.2
Synced with LineageOS source
Kernel updated to latest version
3.5.3
Synced with LineageOS source
Kernel updated to latest version
Added Option to disable screenshot sound
Added More volume steps
Added Option to unlock secured lockscreen (pin/pattern...etc) with fingerprint after reboot
Added Substratum and Magisk tile in dashboard if is user installed
3.5.4
Synced with LineageOS source
Kernel updated to latest version
Switch to linaro 6.x kernel toolchain
3.5.6
Synced with LineageOS source
Kernel updated to latest version
3.5.8
Synced with LineageOS source
Kernel updated to latest version
Upgrade to Android version to 7.1.2_r17
Update to June's security patch
Added Enhanced gps from SultanXDA LAOS14.1 rom
Updated to 4.1.5 oos blobs
3.5.9
Synced with LineageOS source
Kernel updated to latest version
3.6.0
Synced with LineageOS source
Kernel updated to latest version
3.6.1
Synced with LineageOS source
Kernel updated to latest version
Fix for wifi disconnections with some routers
3.6.3
Synced with LineageOS source
Kernel updated to latest version
3.6.5
Synced with LineageOS source
Kernel updated to latest version (completely new kernel rebased with new features)
Added option to customize clear all recents button positions
3.6.7
Synced with LineageOS source
Kernel updated to latest version
Switch to official LineageOS camera hal solution
3.6.8
Synced with LineageOS source
Added Qs tiles animation and row/columns configuration options
3.6.9
Synced with LineageOS source
Kernel updated to latest version (added new drivers and updated to 3.18.58)
3.7.1
Synced with LineageOS source
Added confirmation dialog for power off
Kernel updated to latest version (added new drivers and updated to 3.18.59)
3.7.2
Synced with LineageOS source
Added more options to alert slider (ring, vibrate)
3.7.3
Synced with LineageOS source
Kernel updated to latest version (Linux kernel version updated to 3.18.60)
Updated to July security patch
3.7.4
Synced with LineageOS source
3.7.5
Synced with LineageOS source
Kernel updated to latest version
Added wakeblock app support
3.7.8
Synced with LineageOS source
Kernel updated to latest version
Added New modded Launcher3 and Nuclear wallpapers app
3.7.9
Synced with LineageOS source
Kernel updated to latest version
3.8.4
Synced with LineageOS source
Kernel updated to latest version
3.8.6
Synced with LineageOS source
Kernel updated to latest version (Linux kernel version updated to 3.18.63)
Updated to August security patch
3.8.7
Synced with LineageOS source
Kernel updated to latest version (Linux kernel version updated to 3.18.65)
Added touch to add/remove qs tiles
3.9.0
Synced with LineageOS source
Kernel updated to latest version
Added Modified oos cam with all stock features working
3.9.1
Synced with LineageOS source
Kernel updated to latest version (Linux kernel version updated to 3.18.66)
Added Google camera with hdr+ and 60fps video recording
Added dci-p3 option in live display settings
3.9.2
Synced with LineageOS source
Fix for green screen while changing camera modes and some small bugs with default settings not being properly applied
3.9.4
Synced with LineageOS source
Kernel updated to latest version
Fix for gcam slow-motion recording
Updated wakeblock app to latest
3.9.5
Synced with LineageOS source
Kernel updated to latest version
Added music tile
Added option to reset battery history stats
3.9.6
Synced with LineageOS source
Kernel updated to latest version, added new driver to boost fingerprint unlock
3.9.8
Synced with LineageOS source
Kernel updated to latest version
Fix dark video recording in Google camera with 30fps
3.9.9
Synced with LineageOS source
Kernel updated to latest version (Linux kernel version updated to 3.18.67)
4.0.1
Synced with LineageOS source
Kernel updated to latest version (Linux kernel version updated to 3.18.68)
Added AOSPA color engine
Update Google camera, now with raw too
4.0.2
Synced with LineageOS source
Fixed setup wizard fc on first installs
4.0.3
Synced with LineageOS source
Kernel updated to latest version (Linux kernel version updated to 3.18.69)
Tweaked interactive to get a bit more of performance
4.0.4
Synced with LineageOS source
Kernel updated to latest version (Linux kernel version updated to 3.18.70)
Added DCI-P3 for op3 users
4.0.5
Switch to enforcing selinux
Fix weird bug with some substratum font apps not working properly
4.0.7
Synced with LineageOS source
Kernel updated to latest version (Linux kernel version updated to 3.18.71)
4.0.8
Synced with LineageOS source
Kernel updated to latest version
Updated to September security patch
Fixed srgb not sticking
4.0.9
Synced with LineageOS source
Kernel updated to latest version
Clean up build.prop tweaks
4.1.1
Synced with LineageOS source
Kernel updated to latest version
Bug fixes
4.1.3
Synced with LineageOS source
Kernel updated to latest version (totally new kernel rebased)
Updated prebuilt apks
4.1.4
Synced with LineageOS source
Kernel updated to latest version
4.1.5
Synced with LineageOS source
Kernel updated to latest version (linux version updated to 3.18.74)
4.1.6
Synced with LineageOS source
Kernel updated to latest version (linux version updated to 3.18.75)
4.1.7
Kernel updated to latest version (fix slow screen unlock when idle)
4.1.8
Synced with LineageOS source
Kernel updated to latest version (linux version updated to 3.18.76) removed some useless drivers and tweaked for better responsiveness.
4.1.9
Synced with LineageOS source
Kernel updated to latest version ( totally remaked and upstreamed to linux version 3.18.77)
4.2.0
Synced with LineageOS source
Kernel updated to latest version
Bug fixes
4.2.4
Synced with LineageOS source
Kernel updated to latest version (upstreamed to linux version 3.18.80)
5.0.0-FINAL
Synced with LineageOS source
Kernel updated to latest version (upstreamed to Linux version 3.18.82)
Fixed slow screen unlock while in deepsleep
Updated to November security patch
Added krack vulnerability patch
Another one just in case
Good to see here, you make the zuk Z1 better than was
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Verry Nice to see! Maybe point out that LineageOS ships with their own root.
PS thank you for you interest in this device.
Sent from my OnePlus3T using XDA Labs
Mr_White_214 said:
Verry Nice to see! Maybe point out that LineageOS ships with their own root.
PS thank you for you interest in this device.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
No mate LineageOS don't ships root by default, builders have to add the necessary code to root be builded and i will not do it because i preffer to let users decide about rooted and unrooted rom just like official LineageOS.
Sent from my Nuclear OnePlus3T
acuicultor said:
No mate LineageOS don't ships root by default, builders have to add the necessary code to root be builded and i will not do it because i preffer to let users decide about rooted and unrooted rom just like official LineageOS.
Click to expand...
Click to collapse
Well my bad, cyanogenmod did ship with that. That is why i thought LOS would have it to.
Sent from my OnePlus3T using XDA Labs
Tried to install and after setting WiFi network it automatically goes to tap and go which I did not want it to do. I can't get through setup.
Sent from my OnePlus 3T using Tapatalk
tdamocles said:
Tried to install and after setting WiFi network it automatically goes to tap and go which I did not want it to do. I can't get through setup.
Sent from my OnePlus 3T using Tapatalk
Click to expand...
Click to collapse
Gapps issue, use older ones.
Sent from my Nuclear OnePlus3T
Any specific how much older?
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
@acuicultor please release your kernel separate
Enviado desde mi unknown mediante Tapatalk
liver20 said:
@acuicultor please release your kernel separate
Enviado desde mi unknown mediante Tapatalk
Click to expand...
Click to collapse
I'll do it when i get some spare time to open a thread.
Sent from my Nuclear OnePlus3T
MATRIKS said:
Any specific how much older?
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Im using nano 2017-01-17 and working flawesly.
Sent from my Nuclear OnePlus3T
MATRIKS said:
Any specific how much older?
Click to expand...
Click to collapse
As old as the build date i guess
acuicultor said:
Im using nano 2017-01-17 and working flawesly.
Sent from my Nuclear OnePlus3T
Click to expand...
Click to collapse
This rom works great with the gapps that you suggested
Sent from my ONEPLUS A3000 using Tapatalk
Just to let you know, camera port 4.1 works fine and fully functional by disabling or removing the built-in camera
Sent from my ONEPLUS A3003 using Tapatalk
xanthrax said:
Just to let you know, camera port 4.1 works fine and fully functional by disabling or removing the built-in camera
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Do you mean OOS camera port apks?
tdamocles said:
Do you mean OOS camera port apks?
Click to expand...
Click to collapse
Yes, that one
Sent from my Darkside of Oneplus 3T
Acuicultor! Hmmm... maybe it's time for me to sell the Zuk & get a Oneplus 3T...
New build up!!
Download link and changelog in op.
Enjoy!!!!
Sent from my Nuclear OnePlus3T
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
CodeX makes your device even snappier than before. Being a battery and performance balanced kernel it never compromises on stability. You know why? Cause your device deserves it! CodeX main priority is battery. More Juice equals More Fun. Introducing the new CodeX Kernel Updater, which downloads the latest builds available from the remote server and flashes it automatically! All you need is network access to download the latest builds from the app. Then just click the Flash Kernel option in the navigation menu to flash the kernel. This app flashes the kernel through TWRP automatically and reboots your device with the latest CodeX Kernel
Rules that CodeX follow:
Be up to date with linux-stable
Stability and Security are at peaks
Features will be added based on Stability (If some feature breaks the stability, then I'll need to break it)
Have fun. And yeah, let me know if you need any feature. I'll always consider user opinions. But as I said, If that feature breaks the stability then I'll consider removing it!
Okay, time for most Interesting part, FEATURES!
Features:
OTA
More Juice
Built with clang-7.0.2
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0)
Latest linux-stable upstream (4.4.150)
Built on OOS source
DT2W support
Deep sleep fixed
Dirty Ratio tweaks
Better performance than stock
KCAL color control
Boeffla wake lock blocker
CPU wake boost driver
Switch for Fsync
Wireguard VPN support
Audio Control
Disables dm-verity
AnyKernel2 Flashable
CPU Governors:
Alucard
Blu_active
I/O Schedulers:
Maple(default)
TCP:
Westwood(default)
Instructions:
1. Download both the builds (given below).
2. Flash both of them in TWRP/RWRP.
3. Reboot and enjoy
Downloads:
CodeX Updater:
Don't install any of these APKs directly without flashing the Version 1.0 zip! (If you do so, Flashing Kernel option crashes the app!)
Version 1.1 It is a zip to install the app with the right privileges. The app has auto-updater for latest releases
CodeX Kernel:
Version 1.3
Version 1.4
Version 1.5
Version 1.6
Version 1.7
FAQs:
1. Can you add xyz feature?
A. As already said, I'll always consider user opinions. But as I said, If that feature breaks the stability then I'll consider removing it!
2. Why the app needs internet for loading changelog or while flashing kernel?
A. Well, the app tries to load the latest changelog available in the remote server. And regarding flashing kernel, it makes sure that you're flashing latest version of the kernel.
3. Battery drains a lot! Damn CodeX?!
A. I've added most of the battery patches to the kernel. Still if battery drains faster for you, then consider either calibrating your battery or use an app like BetterBatteryStats to know what's causing the drain. Alternatively, I suggest using Greenify.
4. Which ROMs does this kernel support?
A. Have a look at the title. Only AOSP/LOS based ROMs. Though you can try it on MIUI, but you may face bugs
5. Why does the app says CodeX not found?
A. Well, I made this app to work exclusively with CodeX Kernel. I may plan to support other kernels in the future.
6. App Force closes on clicking Flash Kernel?
A. Make sure that you have your Updater in the system.
Thanks to:
@AxelBlaz3 for inviting me to continue his project. He'll work on it when he finds time.
@mihran_thalhath for helping me with some kernel things :good:
@sscsps for his cloud. CodeX shouldn't be existing without him
@Psycho-Mods for helping me in UI designing and fixing weird bugs in the CodeX Updater app.
@Shahan_mik3 for DT2W on custom ROMs.
@shekhawat2 for qcacld driver (Wi-Fi fix).
@nathanchance for the commits I've cherry-picked.
@Sultanxda for several battery and performance commits.
@franciscofranco for battery tweaks.
@osm0sis for AnyKernel2
Sources:
https://github.com/MiguelNdeCarvalho/Codex-Kernel
Telegram group:
Codex Kernel | Whyred: https://t.me/codexkernel
Whyred - OFFICIAL: https://t.me/redminote5proofficial
XDA:DevDB Information
[KERNEL][OTA][AOSP/LOS][CLANG-7.0.2][4.4.150] CodeX Kernel v1.6 [August 18, 2018], Kernel for the Xiaomi Redmi Note 5 Pro
Contributors
MIguelNdeCarvalho, AxelBlaz3
Source Code: https://github.com/MiguelNdeCarvalho/Codex-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.7
Stable Release Date: 2018-08-18
Created 2018-07-23
Last Updated 2018-08-18
Changelog:
Version 1.3 (July 23, 2018)
Latest linux-stable upstream (4.4.143),
Latest CAF upstream tag merged (LA.UM.6.2.r1-09500-sdm660.0),
Remove Adreno Boost,
Remove Adreno Idler
Version 1.4 (July 25, 2018)
Latest linux-stable upstream (4.4.144)
Version 1.5 (August 4, 2018)
Latest linux-stable upstream (4.4.145),
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0),
Add sound control,
Enabled sound control by default,
Added more frequencies and dropped voltage. Thanks to Mihran,
Fully working on Android P
Version 1.6 (August 16, 2018)
Latest linux-stable upstream (4.4.148)
Version 1.7 (August 18, 2018)
Latest linux-stable upstream (4.4.150)
The Codex Updater link is unavailable...
Why another thread?
bayad said:
The Codex Updater link is unavailable...
Click to expand...
Click to collapse
already fixed
alreadyregistered said:
Why another thread?
Click to expand...
Click to collapse
because the project will be mantained by me and Axel will only help me, he has no time
Audio control feature ??
Ara Seferian said:
Audio control feature ??
Click to expand...
Click to collapse
I am not so experienced with kernel, but I will take a look
Uh oh. This happened.
The AndroidGuy said:
Uh oh. This happened.
Click to expand...
Click to collapse
Soon you'll have to ask Google for permission before making a phone call.
peter-k said:
Soon you'll have to ask Google for permission before making a phone call.
Click to expand...
Click to collapse
Haha:silly:
New Build Is Up!
Version 1.5 (August 4, 2018)
Latest linux-stable upstream (4.4.145)
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0)
Add sound control
Enabled sound control by default
Added more frequencies and dropped voltage. Thanks to Mihran
Fully working on Android P
Have fun!
Great
Thx brthr for this Kernel?? and Thx for Keeping it Updated
Updates Not Showing In The CodeX Updater App...
New Version 1.5, Still Showing 1.2 New Version
great kernel, best performance on AEX. Thanks.
i'm using AEX 5.7 now, how can i flash this kernel?
should i download v1.3 and v1.4? or just v1.5 and then flash it through RWRP?
edomiredo said:
i'm using AEX 5.7 now, how can i flash this kernel?
should i download v1.3 and v1.4? or just v1.5 and then flash it through RWRP?
Click to expand...
Click to collapse
You only need to download 1.5 and flash with twrp. sorry for my bad english.
Ver 1.5 UC/OC CPU
Big: 300 -> 2.2 Ghz
Litle: 300->1.8 Ghz
nghiabh said:
You only need to download 1.5 and flash with twrp. sorry for my bad english.
Ver 1.5 UC/OC CPU
Big: 300 -> 2.2 Ghz
Litle: 300->1.8 Ghz
Click to expand...
Click to collapse
so i can customize kernel configuration with Kernel Adiutor?
edomiredo said:
so i can customize kernel configuration with Kernel Adiutor?
Click to expand...
Click to collapse
Yes
nghiabh said:
Yes
Click to expand...
Click to collapse
it is just me or v1.5 is draining too fast than v1.2?
GENOM KERNEL
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This kernel is only for MIUI PIE rom
Always upstreamed with
Linux Upstream | Latest CAF Tag | Latest Wlan Driver Tag
Download :
Github Release
Installations :
Backup boot.img and /vendor/lib/modules folder if you want to go back
Flash Zip file with any twrp based recovery
reboot and Enjoy
XDA:DevDB Information
Genom Kernel tulip, ROM for the Xiaomi Redmi Note 6 Pro
Contributors
rama982
Source Code: https://github.com/rama982/kernel_xiaomi_sdm660-tulip_miui
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Stable Release Date: 2019-01-10
Created 2019-01-10
Last Updated 2019-05-18
[SIZE=+1]Changelogs[/SIZE]
r5 - 2019-05-18 (UTC)
*Merge* Linux Stable 4.4.180
*Merge* F2FS Stable Upstream
Drop touchboost
Use speedbin4 CPU freq table (1.8GHz/1.95Ghz)
lowmemorykiller: checkout to kernel/common
r4 - 2019-05-14 (UTC)
Rebased on new Pie kernel source from Xiaomi
Add support for AOSP
Core Improvement
r3 - 2019-05-11 (UTC)
Add adreno idler
Add adrenoboost, disable by default
Add sound control
Add wireguard support
Core Improvement
Disable CRC check
Disable fsync by default
Enable TTL support
Enable wq power efficient default
Queue work on system_power_efficient_wq
Sync with sdm660-perf_defconfig
Pick KGSL patch
Pick MMC patch
Pick TCP patch
Use westwood as default TCP
r2 - 2019-05-08 (UTC)
Add 32-bit vDSO implementation
Add Boeffla Wakelocks Blocker
Add CPU Input Boost
Add Devfreq Boost
Add KCAL color control
Core Improvement
Enable and Use LZ4 compression for ZRAM
Pick CFQ I/O scheduler patch
r1 - 2019-05-07 (UTC)
Compiled with Android Clang 9.0.3
Linux 4.4.179
CAF tag: LA.UM.7.2.r1-06900-sdm660.0
Merged aosp/android-4.4 kernel common
Add F2FS support for MIUI (only data partition)
Upstreamed F2FS from linux stable
Merged F2FS patch from Arter97
Hax GPU ID to use Adreno 512 (for HD settings)
rama982 said:
UPSTREAM KERNEL
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This kernel is only for MIUI OREO rom
Always upstreamed with
Linux Upstream | Latest CAF Tag | Latest Wlan Tag
Features:
Only upstream!
Merged Linux 4.4.169
Merged Oreo CAF & Wlan Tag : LA.UM.6.2.r1-11500-sdm660.0
Vibration Control
exFAT Support
Download :
Github Release
Installations :
Backup boot.img and /vendor/lib/modules folder if you want to go back
Flash Zip file with any twrp based recovery
reboot and Enjoy
TELEGRAM NIGHTLY BUILD :
Genom Kernel CI
XDA:DevDB Information
Contributors
rama982
Source Code: https://github.com/Genom-Projek/android_kernel_xiaomi_tulip
Kernel: Linux 4.x
Version Information
Status: Stable
Stable Release Date: 2019-01-10
Created 2019-01-10
Last Updated 2019-01-10
Click to expand...
Click to collapse
Can someone simplify this for a newb?
@Shadowsts
Can't be simpler than that...
Shadowsts said:
Can someone simplify this for a newb?
Click to expand...
Click to collapse
it's basically an updated stock kernel, without new features or flashy things
What can we expect now for the custom ROM community?
stavrakas2007 said:
What can we expect now for the custom ROM community?
Click to expand...
Click to collapse
wrong thread
Does it support dt2w?
Didierpiscis said:
Does it support dt2w?
Click to expand...
Click to collapse
of course, because that's present in the stock kernel and this is the stock kernel
no features were added or removed
Sorry for asking: Good for pie roms?
Didierpiscis said:
Sorry for asking: Good for pie roms?
Click to expand...
Click to collapse
No, its for MIUI
rama982 said:
No, its for MIUI
Click to expand...
Click to collapse
Have an idea for the AOSP Kernel?
Because your kernel is the best!
Didierpiscis said:
Sorry for asking: Good for pie roms?
Click to expand...
Click to collapse
its say
This kernel is only for MIUI OREO rom:silly:
Click to expand...
Click to collapse
Upstream Kernel MIUI (20190117)
* Merged Linux 4.4.170 & 4.4.171
* Merged CAF tag 'LA.UM.6.2.r1-11600-sdm660.0'
https://github.com/Genom-Projek/and...90117/Upstream-Kernel-MIUI-tulip-20190117.zip
nb: this kernel only upstream, if you want some feature, you can ask.
rama982 said:
Upstream Kernel MIUI (20190117)
* Merged Linux 4.4.170 & 4.4.171
* Merged CAF tag 'LA.UM.6.2.r1-11600-sdm660.0'
https://github.com/Genom-Projek/and...90117/Upstream-Kernel-MIUI-tulip-20190117.zip
nb: this kernel only upstream, if you want some feature, you can ask.
Click to expand...
Click to collapse
Kcal would be great
Is there any way to flash this with locked bootloader?? Battery life with stock kernel is hideous!
pikachukaki said:
Is there any way to flash this with locked bootloader?? Battery life with stock kernel is hideous!
Click to expand...
Click to collapse
This kernel can improve battery life？I thought its just an update
sorry for asking. i haven't flashed any kernel before.
what is this good for? only vibration control? i mean any noticeable differance?
g070140 said:
This kernel can improve battery life？I thought its just an update
Click to expand...
Click to collapse
Surely is better than stock!on what degree I'm not sure! But I never had 3h sot with a xiaomi phone!
pikachukaki said:
Is there any way to flash this with locked bootloader?? Battery life with stock kernel is hideous!
Click to expand...
Click to collapse
Really ? I have constantly 7h+ of SOT with the stock kernel... that's why i'm hesitating to even unlock my footlocker