I have the problem that my galaxy s6 is stuck at the samsung boot logo. If I flash another rom I have the same problem. Anyone know how to fix it?
milantenhave said:
I have the problem that my galaxy s6 is stuck at the samsung boot logo. If I flash another rom I have the same problem. Anyone know how to fix it?
Click to expand...
Click to collapse
Make sure, you have a compatible ROM (you did not provide your variant) - clean /system + /data & /cache in your recovery and flash the ROM.
First boot might take some minutes.
Also make sure you have the modem and boot loader required for that ROM.
davebugyi said:
Make sure, you have a compatible ROM (you did not provide your variant) - clean /system + /data & /cache in your recovery and flash the ROM.
First boot might take some minutes.
Also make sure you have the modem and boot loader required for that ROM.
Click to expand...
Click to collapse
Try flashing your stock software through ODIN
Related
Alrite, my phone is ****ing stuck on bootloop, while installing Stock ROM. I install'd stock rom via Odin, After flashing i completed and it says 'Close the serial port and wait until reboot'. So i waited until reboot and after GT-S5670 it show'd me the clockwork mod screen loading something i only remember the last line "E:/can't mount/system.Reboot" (something like that) and voila it's stuck in bootloop of bloody samsung logo. I tried 2 stock roms, DDKT3 and DXKT7, same result on both the ROMS.
Any idea?
And i've also tried replacing cwm version with diff. one. (Same results)
EDIT: I'm sorry but I DON'T KNOW HOW, it fixed it self. After 10 minutes, i started my phone and thought to install custom ROM. CWM was gone and samsung official recovery was there. So i restarted my phone, and it was fixed. But i'm still wondering that i got that message ("E:/can't mount/system.Reboot") like 3 times after every flash of stock ROM done through ODIN at first 2 flashes done (DDKT3) was useless and showed that error and also after the 3rd flash (DXKT7) but after some time , it fixed it self. Still thinking why and how?
EDIT2: Mods can delete this thread if they feel like it's useless. :/
echo104 said:
Alrite, my phone is ****ing stuck on bootloop, while installing Stock ROM. I install'd stock rom via Odin, After flashing i completed and it says 'Close the serial port and wait until reboot'. So i waited until reboot and after GT-S5670 it show'd me the clockwork mod screen loading something i only remember the last line "E:/can't mount/system.Reboot" (something like that) and voila it's stuck in bootloop of bloody samsung logo. I tried 2 stock roms, DDKT3 and DXKT7, same result on both the ROMS.
Any idea?
And i've also tried replacing cwm version with diff. one. (Same results)
EDIT: I'm sorry but I DON'T KNOW HOW, it fixed it self. After 10 minutes, i started my phone and thought to install custom ROM. CWM was gone and samsung official recovery was there. So i restarted my phone, and it was fixed. But i'm still wondering that i got that message ("E:/can't mount/system.Reboot") like 3 times after every flash of stock ROM done through ODIN at first 2 flashes done (DDKT3) was useless and showed that error and also after the 3rd flash (DXKT7) but after some time , it fixed it self. Still thinking why and how?
EDIT2: Mods can delete this thread if they feel like it's useless. :/
Click to expand...
Click to collapse
And this is what t i guess:
-You use a custom rom
-Now you flash an stock rom
I think it because your DATA partition is EXT4, stock rom doesnt support EXT4. And in DDKT3,DXKT7 has no data.rfs so DATA partition doesnt convert to RFS
As you said above, Go to stock Recovery and do a wipe/reset Data format DATA partition to RFS
zcop said:
And this is what t i guess:
-You use a custom rom
-Now you flash an stock rom
I think it because your DATA partition is EXT4, stock rom doesnt support EXT4. And in DDKT3,DXKT7 has no data.rfs so DATA partition doesnt convert to RFS
As you said above, Go to stock Recovery and do a wipe/reset Data format DATA partition to RFS
Click to expand...
Click to collapse
So how was it fixed i didn't did anything?
Sent from my GT-S5670 using xda premium
Actually when ever u try to go to stock flash the full package 1st and after one package.. it will boot with no problems
Hi all please can someone help me. I tried to flash the latest version of Elegence ROM sense 4 and updated my bootloader to 3.33. Since doing this my phone will not boot past the first animation screen. I have tried other ROMs and older bootloaders I have previously used but no luck. I cant used ADB because windows wont detect my phone, I have the ability to get into the bootloader and EXT4 recovery thats it. If anyone can help me I would be greatly appreciated!
ok try this pal.
1.re-install the required firmware for your prefered rom. (elegance?)
2.boot into recovery
3.format everything apart from your sd-card.
4.install rom.
5.reboot and wait for 10 mins max. if it doesnt boot come back for help.
additional. when you flash new firmware you need to delete your cache or the phone will just bootloop. just so you know for next time :highfive:
Just for future reference if you get to the bootanimation screen its probably not bricked.
Sent from my HTC Sensation using xda app-developers app
So I am stuck on a boot screen I followed the istruction of deleting system,dalvik,cache, factory reset. I installed the CM10 rom and Gapps yet it hangs for a really long time about 5-6 mins on the boot screen. Did I do something wrong>? I can mount the storage through TWRP and throw a different rom on.
bratten2121 said:
So I am stuck on a boot screen I followed the istruction of deleting system,dalvik,cache, factory reset. I installed the CM10 rom and Gapps yet it hangs for a really long time about 5-6 mins on the boot screen. Did I do something wrong>? I can mount the storage through TWRP and throw a different rom on.
Click to expand...
Click to collapse
what h-boot are you ? you may need to fastboot the boot.img
Hboot-1.14.0002
do some searching i think you need to flash the boot.img
Do I have to flash one of these? http://forum.xda-developers.com/showthread.php?t=1694012 or will these not work because I have hboot 1.14? I do want to be able to flash CM10.
bratten2121 said:
Do I have to flash one of these? http://forum.xda-developers.com/showthread.php?t=1694012 or will these not work because I have hboot 1.14? I do want to be able to flash CM10.
Click to expand...
Click to collapse
you will be able to put CM10 on your device, you will just need to flash the kernel seperately. before you flash the ROM in your recovery, you will need to boot the phone to fastboot mode and run "fastboot flash boot boot.img" using the boot.img file extracted from the ROM you are flashing.
the thread you are linking to there are the radio files. You can flash those, but they aren't necessary for the ROM to work. They may improve your reception.
Thanks a lot! It booted up but cant get past setup services keeps force closing? SHould I first flash the kernel then install the rom?
bratten2121 said:
Thanks a lot! It booted up but cant get past setup services keeps force closing? SHould I first flash the kernel then install the rom?
Click to expand...
Click to collapse
I think it should work either way, maybe clear cache and dalvik again and see how you go?
Hi,
I tried to upgrade my samsung Galaxy Tab 2 GT-P3100 without backup. and the upgrade failed.
now the tab is not able to start, shows Android Recovery <3e> only.
Kindly provide suggestions how to boot, or load android again.
piyusheta said:
Hi,
I tried to upgrade my samsung Galaxy Tab 2 GT-P3100 without backup. and the upgrade failed.
now the tab is not able to start, shows Android Recovery <3e> only.
Kindly provide suggestions how to boot, or load android again.
Click to expand...
Click to collapse
Can you enter "DOWNLOAD" mode?
first, please provide your steps from rooting to flashing rom.
and also provide any kind of information of recoveries, roms, gapps, kernels, etc you're using.
so anyone can help you better..
150208 said:
first, please provide your steps from rooting to flashing rom.
and also provide any kind of information of recoveries, roms, gapps, kernels, etc you're using.
so anyone can help you better..
Click to expand...
Click to collapse
Thats needed in most cases right.
BUT
Simple solution is just reflash stock. The error message means he has stock recovery installed.
Just need to know if you can enter "DOWNLOAD" mode
LS.xD said:
Thats needed in most cases right.
BUT
Simple solution is just reflash stock. The error message means he has stock recovery installed.
Just need to know if you can enter "DOWNLOAD" mode
Click to expand...
Click to collapse
i'm just misdoubt that he flash something incorrectly you know
because he said that he can get to the recovery, but seems that he doesn't know what means recovery is
so before i say futher the solutions or what might causing the problems, it's better to know what he's knows first. because if i explain something that he doesn't know, things will be more complicated heheh :laugh: :laugh: :laugh:
like my words haha :laugh: :laugh: :laugh:
Actaully tried to upgrade to android kitkat 4.4 from 4.2.2
but error generated and even coundt restore the backup.
now the stage is, the screen never goes off until battery runs out.
the screen appears with android logo
"Android system recovery <3e>"
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
I tried all options, but didn't work.
even the tablet is not being connected with laptop.
so only option is, if reflash stock done from SDMemory card ?
kindly guide me the suitable steps.
You can't just flash kitkat roms directly from stock recovery,, you need a custom recovery to do that,,, here is the work around :
1 first reflash stock rom again
2 secondly flash a custom recovery from odin ,,, use luigi way of one step recovery and root
3 after that when you are able to boot into custom recovery,make sure you have cwm recovery >6.0.4.5 installed otherwise you will not be able to flash kitkat roms. For the record, you can flash phillz recovery 6.19.6 from custom recovery.
When you are done,please come here again
Sent from my GT-P3100 using Tapatalk
Hello everyone !
I have some questions about the installaton of superman rom.
I've tried to change the bootloader and the modem but when i tried to install it via Odin it doesn't want to reboot and stay on samsung logo.. That's my only problem because i've successfully installed twrp.
I've heard that my actual rom (stock rom APB2) is encrypted.. how to unencrypt it.. (sorry for my english).
Thanks you !
Did you follow the install instructions on the first page?
They are very clear
suprememaster said:
Did you follow the install instructions on the first page?
They are very clear
Click to expand...
Click to collapse
Of course, i've followed everything but like i said when i want to install bootloader and modem that allow to install rom, it never boot
Try to flash the stock rom ape9 i think instead of the modem only. Can you still go to twrp even when you got a bootloop? If so. Flash the rom in twrp
suprememaster said:
Try to flash the stock rom ape9 i think instead of the modem only. Can you still go to twrp even when you got a bootloop? If so. Flash the rom in twrp
Click to expand...
Click to collapse
Can you give me the link to download the ape9 stock rom please i didn't found it :/
Yes when it booloops i can go to twrp and i've tried to install the rom but when the installation with aroma finished, it bootloop again
I think you might've skip a step in this thread:
http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
Namely step 9. that should answer you decrypting question.
It does a few minutes for boot up. How long were you in the bootloop??
But the rom is pre-rooted no ? It means that i don't have to root the phone before if i've right understand ?
If i let this 3 hours i think it have bootloop during 3 hours
@p0m-walt
Yes the Rom is prerooted but that was not what I was referring to. You asked how to decrypt the phone so I provided a link to the dm-verity zip file that you need to flash through twrp before installing a Rom. If you missed that step that's probably what's causing you problems.
3 hours in a bootloop is a little excessive. You should figured something was was wrong after 15-20 mins.
Format data
I installed the rom successfuly. I had to install an APE9 stock rom and after that, the installation via twrp was a success, Thanks for your help guys