Hello XDA!
This is my first post here and I am sorry if it's in the wrong forum - there are just too many and I am not used to.
And after that said, I want to ask you for help.
Basically:
- I have Kingleon (alternative name is Star) g9000 that had Android 4.2.2 and I decided to reflash it to 4.4.2
- After few hours of trying, I managed to flash the Recovery (recovery.img) using something called CTRv2.7 ( SP Flash Tool and FlashBoot did not work).
- Well, that is when I broke it and it didn't want to boot in recovery.
- Then I had the great idea to reflash the Boot (boot.img) with the custom one I found for my phone.
- Did the reflashing with fastboot and right after the fastboot flash boot boot.img command, my phone rebooted and got in a bootloop
So, how can I fix this mess?
Thank you for your attention
P.S. I have a backup of the stock ROM
Related
I have a Atrix 2 MB865 which is not a AT&T phone.. It was on ICS before..I rooted it,flashed custom recovery and everything went smooth till here.Then I tried to flash carbon 4.3 unoffical rom through CWM recovery.. Got a message that flash was a success but when I rebooted I got stucked in bootloop.. I tried flashing a stock rom using RSD lite in fastboot mode but everytime it get stucked at "7/20 rebooting cbt.bin fail".. Any help will be greatly appreciated.
Recovery mode is not working and phone is opening is just fastboot mode and no matter what stock rom I flash (ICS or GB) it is stucked at that 7/20 rebooting step and I get a FAIL message... again I say any help will be really appreciated.
EDIT:I can enter stock recovery... will this help???
The above scenario was my problem yesterday and after a lot of browsing and understanding the basic concept I was able to recover my phone.I want to thank to all the Atrix community group for helping me out and providing very good and accurate set of instructions. For me I come from a samsung background so dont have any much knowledge about Motorola chipset but again thanks for the helpful threads/post I was able to recover my phone.
SO THIS IS HOW I RECOVERED
As I mentioned in the above scenario that I was able to enter in fastboot and Stock recovery mode but flashing a stock rom (no matter ICS or GB) wont work because flashing failed in RSD LITE (7/20 Reboot cbt.bin FAIL).
I had drivers and I had antivirus turned off and I have met the every requirement that is favourable for RSD lite to flash stock rom package to my MB865.
Then I saw this THREAD,all thanks to @alteredlikeness.
He proposed a menthod of flashing firmware without using RSD Lite and it WORKED!!!!:victory:
He provided a batch file package and told to extract in your FXZ folder(extracted Stock Rom folder).
As told the device must be connected in fastboot mode to PC and then the batch file should be run ... I followed all the instructions carefully and took a while to run the batch file but in the end it flashed everything and I recovered my phone.
Just in case if anyone has met the above mentioned problem try this method .. It seems to be working for both AT&T and NON AT&T MB865 phones.
Hello,
I tried to flash a custom rom with custom boot.img, i flashed the boot.img, but didn't add the rom to the phone memory, so the phone didn't start, then I got to the cwm, tried to install different custom roms hopping that boot.img will somehow fix, but it told me that it can't be done. then I done the backup at cwm without knowing what it does and then i couldn't get even to the cwm.
So the phone is keeping on the "Sony" screen. Can't get to the fastboot, flashmode.
Is the only way to fix it is fixing the boot.img by jtag?
Sorry for my bad english.
With Regards,
Gediminas
Hi there,
If you don't find any solution in the bellow thread:
[GUIDE] Recover 2012 and newer XPERIAs from SOFT-brick
then you must register an account and ask directly here:
[S/SL/AS/Ion]General bricked device thread
Good luck
Hello friends,
I often used to flash several ROM since I had my OnePlus One phone, and now I'm currently facing one "little" problem with my OP3.
I have recently flashed the new official LineageOs custom ROM (which normally support MultiROM), since the recovery. After the flash, the output mentionned a successful flash, but after reboot, my phone were unable to boot properly and the recovery was not here anymore...(black screen).
The only option available until now is the fastboot mode. I tried many methods, like flashing several recoveries, unbricking my phone with the official guide made by Naman Bhalla...but nothing to do in order to get a proper and working system with a fully functional recovery...
Could someone help me?
My friendships,
S0bek
Hi !
Start by reverting to stock oos from the dedicated forum
When you arrive to fastboot flash recovery.img , don`t boot into android , just power off the device and boot into recovery using the buttons combination
Good luck !
I have this problem last month that when I'm going to access recovery mode it always bootloop and doesn't do anything. THE LAST TIME I did is I flashed a twrp recovery image but I've download the wrong model for my phone. I used Flashify for flashing the wrong twrp recovery and as I entered, my phone rebooted but it stucked at the logo. So what I did was I removed the battery and it went to a boot. After that, I tried to enter in my recovery mode but it keep on bootlooping when I'm trying to access Recovery mode... I need suggestions and help from you guys! This problem was not solved by others that's why it will help not just me, also those who encountered my experience. I'm using Huawei Honor Bee :laugh::laugh:
Forgot to mention
I flashed the recovery img without unlocking the bootloader.
Nomorenoless said:
I flashed the recovery img without unlocking the bootloader.
Click to expand...
Click to collapse
You need to flash a copy of your device's stock recovery or flash your stock firmware.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.
cybrax said:
Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.
Click to expand...
Click to collapse
Hey I got one of them x27 plus wish phone....mtk6572 4.4.2 kitkat .....for true info on device install "device info hw" green icon and activity launcher .....check out the info it gives compared to info from ph settings menu.....but my question did you find way to root of flash a generic android rom?
I used kingroot with laptop.