[Completed] Moto razr maxx stuck in boot loop, Unable to Re-Flash - XDA Assist

HI,
So things goes like this; few months ago my Motorola Razr maxx XT910 (India) stuck in boot loop. I did a lot of research for the solution of problem, then i found RSD Lite and compatible firmware for my device so i flashed my device through RSD lite from " ICS (Asia) to jelly bean (EU) ".
here is the file name ( cdma_spyder_9.8.2O-72_VZW-16_1ff.xml ) the firmware file which i have used for flashing.
Eventually everything was good but from last few days my phone is going into the bootloop again but restarting making it boot properly. But today it is stuck in Boot loop and just looped......
i did wipe cache partition and wipe data/factory reset from Recovery option but after rebooting it's again into boot loop. I tried RSD lite again to flash again from cdma_spyder_9.8.2O-72_VZW-16_1ff.xml this file but getting below error:
Failed flashing process. 6/16 flash motoboot " motoboot.img " -> Phone returned fail
USB debugging is Enabled if that could help in anyway.
let me know if you need any more info....
Please help ....
Regards
Devank

Devank009 said:
HI,
So things goes like this; few months ago my Motorola Razr maxx XT910 (India) stuck in boot loop. I did a lot of research for the solution of problem, then i found RSD Lite and compatible firmware for my device so i flashed my device through RSD lite from " ICS (Asia) to jelly bean (EU) ".
here is the file name ( cdma_spyder_9.8.2O-72_VZW-16_1ff.xml ) the firmware file which i have used for flashing.
Eventually everything was good but from last few days my phone is going into the bootloop again but restarting making it boot properly. But today it is stuck in Boot loop and just looped......
i did wipe cache partition and wipe data/factory reset from Recovery option but after rebooting it's again into boot loop. I tried RSD lite again to flash again from cdma_spyder_9.8.2O-72_VZW-16_1ff.xml this file but getting below error:
Failed flashing process. 6/16 flash motoboot " motoboot.img " -> Phone returned fail
USB debugging is Enabled if that could help in anyway.
let me know if you need any more info....
Please help ....
Regards
Devank
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
It looks there is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.

Related

SOLVED [soft brick]-[need help] ---Edited

I have a Atrix 2 MB865 which is not a AT&T phone.. It was on ICS before..I rooted it,flashed custom recovery and everything went smooth till here.Then I tried to flash carbon 4.3 unoffical rom through CWM recovery.. Got a message that flash was a success but when I rebooted I got stucked in bootloop.. I tried flashing a stock rom using RSD lite in fastboot mode but everytime it get stucked at "7/20 rebooting cbt.bin fail".. Any help will be greatly appreciated.
Recovery mode is not working and phone is opening is just fastboot mode and no matter what stock rom I flash (ICS or GB) it is stucked at that 7/20 rebooting step and I get a FAIL message... again I say any help will be really appreciated.
EDIT:I can enter stock recovery... will this help???
The above scenario was my problem yesterday and after a lot of browsing and understanding the basic concept I was able to recover my phone.I want to thank to all the Atrix community group for helping me out and providing very good and accurate set of instructions. For me I come from a samsung background so dont have any much knowledge about Motorola chipset but again thanks for the helpful threads/post I was able to recover my phone.
SO THIS IS HOW I RECOVERED
As I mentioned in the above scenario that I was able to enter in fastboot and Stock recovery mode but flashing a stock rom (no matter ICS or GB) wont work because flashing failed in RSD LITE (7/20 Reboot cbt.bin FAIL).
I had drivers and I had antivirus turned off and I have met the every requirement that is favourable for RSD lite to flash stock rom package to my MB865.
Then I saw this THREAD,all thanks to @alteredlikeness.
He proposed a menthod of flashing firmware without using RSD Lite and it WORKED!!!!:victory:
He provided a batch file package and told to extract in your FXZ folder(extracted Stock Rom folder).
As told the device must be connected in fastboot mode to PC and then the batch file should be run ... I followed all the instructions carefully and took a while to run the batch file but in the end it flashed everything and I recovered my phone.
Just in case if anyone has met the above mentioned problem try this method .. It seems to be working for both AT&T and NON AT&T MB865 phones.

[Q] i think i need a bootloader for xt909

my xt909 failed to boot up after i did factory reset so i searched for a firmware that matches on my phone.i found china frimware which i think works for my phone so here's what i did.i already flash the rom in rsd lite and i was able to boot in an android boot set up but it suddenly stopped installing and went back to flashboot..what shall i do now?or am i missing something?is it the boot loader for xt909?how can i load bp tools using the fast boot.....please help me :crying:

[Q] XT925 stuck on bootloader/pulsating M

Hello
I have a xt925 that after behaving strange for a few days now is stuck on boot with a pulsating M.
A factory reset did not help so my guess is that some file somewhere is corrupt.
I can get into recovery mode or fastboot mode and RSD lite can talk to the phone.
Can I simply flash a stock motorola ROM? Or will that brick it even further since it was running kitkat before it broke?
Will any stock ROM do?
No the bootloader is not unlocked and I prefer not to do that.

[Completed] Lenovo a526 stuck at "lenovo" logo

Greetings, my lenovo a526 is stuck at lenovo logo.
I already tried wiping cache in stock recovery, but in wipe data/factory reset it says default data flag fail something like that.
Reboot, im still stuck
Then i tried flashing stock rom using spft it was successful yet still stuck at logo.
So I thought i should flash twrp or cwm recovery to install custom rom in sd card
I used adb fastboot. To flash those recovery because my stock recovery doesn't have "install zip in sdcard"
In fastboot,
My device is detected when i execute
Fastboot devices
"mt6582_phone --- device"
I cannot flash cwm or twrp directly because when i do it says remote partition does not support flash.
I believe i need to unlock bootloader first.
So i execute
Fastboot oem unlock
The result is 3 dots loading like forever
Now im in a dead end, i know i have to confirm it in my device but it has no display only logo.
Please, i need help. Is there any way to execute fastboot oem unlock without confirming in my device?
Hi mr__gutz
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
mr__gutz said:
Greetings, my lenovo a526 is stuck at lenovo logo.
I already tried wiping cache in stock recovery, but in wipe data/factory reset it says default data flag fail something like that.
Reboot, im still stuck
Then i tried flashing stock rom using spft it was successful yet still stuck at logo.
So I thought i should flash twrp or cwm recovery to install custom rom in sd card
I used adb fastboot. To flash those recovery because my stock recovery doesn't have "install zip in sdcard"
In fastboot,
My device is detected when i execute
Fastboot devices
"mt6582_phone --- device"
I cannot flash cwm or twrp directly because when i do it says remote partition does not support flash.
I believe i need to unlock bootloader first.
So i execute
Fastboot oem unlock
The result is 3 dots loading like forever
Now im in a dead end, i know i have to confirm it in my device but it has no display only logo.
Please, i need help. Is there any way to execute fastboot oem unlock without confirming in my device?
Click to expand...
Click to collapse

Can't able to flash Stock Firmware

hello guys
i got this problem in my device my phone showing this error Encryption Unsuccessful with a reset phone button(look image) in my moto g and i don't even try to reset my device its showing automatically.
when i press reset phone button boot in recovery for reset phone but can't able to boot in recovery only showing recovery logo(am using twrp).
when tried to flash new recovery from bootloader nothing happen and same with stock firmware when i flashed firmware nothing happen and device boot in same encryption error and same rom. i tried all fastboot erase commands but nothing happen. stuck at same error please help me.
am using moto g 2013 with 7.0 custom rom rooted.

Categories

Resources