Galaxy S6- Knox Warranty Void 1 (0x0400) - Galaxy S6 Q&A, Help & Troubleshooting

[HELP] Knox Warranty Void tripped while flashing official stock ROM
Hello, just bought a new Galaxy S6 with SFR France firmware. Downloaded and installed my country firmware (Romania) to get rid of SFR bloat. flashed via Odin (Knox was 0), reboot to recovery then it showed error dm-variety failed or something like that. I wiped system and cache, reboot again, waited and configured the settings and just to be sure I rebooted the phone in Odin mode and it showed Knox Warranty Void 1 (0x0400). why did that happened? Didn't try to root or install custom firmware, only official stock firmware from sammobile. anything I can do in this case?

Pray that somebody comes up with a workaround or reset (and nobody will notice it on warranty claim). Similiar thing happened to men since then I use custom ROMs.

I hope someone comes with a solution for this. I'll pay for it. Hate it because it happened to me.

What does that code stand for anyway? (0x0400) is it something like an error code or something?

really? flashing through odin up the knox?? that's new, at least to me...

hajyihia said:
really? flashing through odin up the knox?? that's new, at least to me...
Click to expand...
Click to collapse
Yes. no root, no custom ROMs/kernel/recovery. I only needed a stock official ROM with no carrier bloat whatsoever. and this is what happened.

Addix64 said:
Yes. no root, no custom ROMs/kernel/recovery. I only needed a stock official ROM with no carrier bloat whatsoever. and this is what happened.
Click to expand...
Click to collapse
there has to be something wrong, i had a galaxy S4, and i flashed many stock roms and it never upped the knox....can someone more professional explain or confirm that? because i was planning to flash a stock rom through odin to get the latest update....

hajyihia said:
there has to be something wrong, i had a galaxy S4, and i flashed many stock roms and it never upped the knox....can someone more professional explain or confirm that? because i was planning to flash a stock rom through odin to get the latest update....
Click to expand...
Click to collapse
Every time I install the stock firmware KNOX stays 0x0.
The only time I install the stock firmware is when my phone is in a bootloop.
It works every time--no issues whatsoever.
Odin should be the safest program in the world.

Snowby123 said:
Every time I install the stock firmware KNOX stays 0x0.
The only time I install the stock firmware is when my phone is in a bootloop.
It works every time--no issues whatsoever.
Odin should be the safest program in the world.
Click to expand...
Click to collapse
yeah, that's weird, did you try it on your S6? thanks

I can't post pictures yet so I can show to you. After flashing the ROM, reboot to recovery to perform system wipe..at the bottom of the screen where normally it shows applying the CSC, instead it wrote something like "dm-variety failed". Wiped, reboot to write the new firmware, check odin mode and there it was: Knox Warranty Void 1 (0x0400)

hajyihia said:
yeah, that's weird, did you try it on your S6? thanks
Click to expand...
Click to collapse
I actually own the galaxy s6 edge. I have tried it and have never once gotten a single issue.

No fix for this at all?
Sent from my SM-G920F using XDA Free mobile app

There is no fix at this moment for sure. I also flashed ROM(ania) and other stock roms and never had problems, maybe accidentally you tried to flash the carrier romania rom, not the stock one.
Anyway, there isn't anything you can do at this moment, but at least you can install some custom roms and make this phone fly.

http://www.sammobile.com/firmwares/download/54541/G920FXXU2COH2_G920FOXX2COH2_ROM/ this is the ROM I flashed. it's not my first time flashing with Odin. had the S4, Note 3 and Note 4, never had problems while flashing official stock ROMs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Weird, i saw some people also saying that they triped knox flashing stock roms. I don't really know the technical details about s6 but my only ideea is that your SFR rom had a different partition scheme(usually carrier roms have different PIT files) and installing a stock rom which also has a different partition scheme and maybe that''s what triggered the knox. I bought mine directly unlocked from emag and i can freely flash stock roms.
Your phone was locked and then unlocked via code or you bought it directly unlocked?

Phone was locked and unlocked via code. I use it on Digi Mobil network.
Sent from my SM-G920F using XDA Free mobile app

If I flash the SFR rom back, will it do something to the knox flag?
Sent from my SM-G920F using XDA Free mobile app

No Adi, it won't. Sorry.
Sent from my SM-G920F using Tapatalk

Well..bad luck. gonna have to wait for a fix.

Addix64 said:
Well..bad luck. gonna have to wait for a fix.
Click to expand...
Click to collapse
Which will never come, since the Knox counter is an eFuse, so once it is set to 0X1, then only Samsung can set it back to 0 (probably by replacing HW or the mainboard).

Related

Running cleanrom 7, fill me in

So, I upgraded to a moto x last year and haven't touched my vzw sgs3 since. I took out the sim card and gave it to my mom to use as a wifi only game player for her casino games.
Anyway, she finally made the switch and I activated it for her to use to test out the smartphone waters. I had to buy titanium backup and freeze the update because it already wanted to download updates which I'm sure would reek havoc on the phone.
From what I've searched and read, vzw locked up the bootloader and I can no longer flash updated roms or radios. Is this correct? It was super easy before but it seems complex now.
I don't want to brick the thing. I'll probably just leave it as is rather than fudge it up trying to update radios.
I guess the point of this post is what do I have to do to flash new stock roms and update radios? I've searched around and only seem to find stuff for people already on the locked bootloader and using a safestrap method. What about me on the unlocked bootloader?
If I have to lock it up then do all that jazz, I'll just leave it. If could figure out how to get it up to stock locked and on verizon ota I might do that but I'd hate to lose the unlocked bootloader and root in case I ever use this thing for anything again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
antiseen said:
So, I upgraded to a moto x last year and haven't touched my vzw sgs3 since. I took out the sim card and gave it to my mom to use as a wifi only game player for her casino games.
Anyway, she finally made the switch and I activated it for her to use to test out the smartphone waters. I had to buy titanium backup and freeze the update because it already wanted to download updates which I'm sure would reek havoc on the phone.
From what I've searched and read, vzw locked up the bootloader and I can no longer flash updated roms or radios. Is this correct? It was super easy before but it seems complex now.
I don't want to brick the thing. I'll probably just leave it as is rather than fudge it up trying to update radios.
I guess the point of this post is what do I have to do to flash new stock roms and update radios? I've searched around and only seem to find stuff for people already on the locked bootloader and using a safestrap method. What about me on the unlocked bootloader?
If I have to lock it up then do all that jazz, I'll just leave it. If could figure out how to get it up to stock locked and on verizon ota I might do that but I'd hate to lose the unlocked bootloader and root in case I ever use this thing for anything again.
Click to expand...
Click to collapse
I'm also on the unlocked bootloader, there are several of us who still are. As far as the newest stock rom no you cant update to it which is 4.4.2 NE1, you can flash the modem but not the rom itself unless of course you want a locked bootloader
From my CM11 S3
I know this is a bit of an old bump, but rather than make a new thread I figured I'd use this one since the OP still applies.
I updated CWM recovery....can I flash, say, one of the AOSP roms that are on 5.1 or will I brick this? Also, can I flash updated radios or is that a no-no on my unlocked bootloader device? The above screenshot is still applicable to my radios version.
antiseen said:
I know this is a bit of an old bump, but rather than make a new thread I figured I'd use this one since the OP still applies.
I updated CWM recovery....can I flash, say, one of the AOSP roms that are on 5.1 or will I brick this? Also, can I flash updated radios or is that a no-no on my unlocked bootloader device? The above screenshot is still applicable to my radios version.
Click to expand...
Click to collapse
According to the CM12.1 thread you can:
Notes:
Please Use Firmware: VRBMF1
and
Modem/Baseband Version: NE1
If you have recently downgraded from 4.3 to 4.1.2, DO NOT flash the MF1 firmware. You'll brick your device!
If you know you never took the 4.3 OTA, then you can flash the firmware and modem to your hearts content.
Click to expand...
Click to collapse
Thanks for the update. I flashed an updated radio and a cm12.1 nightly with no issues.
Was as easy as I remember and brought a lot of life back to this phone.

[ODIN] Stock Nougat Firmware [SM-G935T] S7 Edge

Stock Android 7.0 T-Mobile Firmware for the s7 edge
G935TUVU4BQB1
And
G935TUVS4BQC1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Here: https://drive.google.com/file/d/0B9QvmNs9dpD-LTdwQUgzejk5ZGM/view?usp=sharing
Mirror: https://mega.nz/#!H5cW1CIK!Z277bHwJlYrWEhmgMw9oaI_FKcZiZm2B1NUTZK1o6p8
Download latest Odin: https://forum.xda-developers.com/showthread.php?t=2711451
G935TUVS4BQC1 = New Firmware!
Download: https://drive.google.com/file/d/0B9QvmNs9dpD-N3lvMGJRemtpYW8/view?usp=sharing
can we flash it to g935v ?
Nice
justda said:
Since OP is taking forever here are 2 links to the odin files to flash nougat
https://www.sammobile.com/firmwares/download/123438/G935TUVU4BQB1_G935TTMB4BQB1_TMB/
http://www.mediafire.com/file/cnrtkb...61s9vc_fac.zip
Click to expand...
Click to collapse
Link is Live:https://drive.google.com/file/d/0B9QvmNs9dpD-LTdwQUgzejk5ZGM/view?usp=sharing
spiderkr said:
can we flash it to g935v ?
Click to expand...
Click to collapse
My s7 edge is from verizon and I did flash this t-mobile firmware with no issues through Odin (my s7 edge is unlocked btw)
Tetraguy said:
My s7 edge is from verizon and I did flash this t-mobile firmware with no issues through Odin (my s7 edge is unlocked btw)
Click to expand...
Click to collapse
Did you flashed directly on the g935v/g935u firmware ? or you flashed tmobile mm first ?
spiderkr said:
Did you flashed directly on the g935v/g935u firmware ? or you flashed tmobile mm first ?
Click to expand...
Click to collapse
Yes I had the Verizon Nougat bata installed. then I simply used odin 12.3 and flashed this firmware like any other stock rom.
When you flash it, your phone user data will be wiped. So I recommend you to make a backup of your files, apps and stuff first
Now we need root for 7.0. I'm gonna stick to 6.0.1 U firmware until then, but I'll be checking daily.
Tetraguy said:
Stock Android 7.0 T-Mobile Firmware for the s7 edge
G935TUVU4BQB1
Download Here: https://drive.google.com/file/d/0B9QvmNs9dpD-LTdwQUgzejk5ZGM/view?usp=sharing
Odin: https://forum.xda-developers.com/showthread.php?t=2711451
Click to expand...
Click to collapse
This wipe everything?
Bassion said:
This wipe everything?
Click to expand...
Click to collapse
Yes it did for me since I had Verizon's CSC installed. but since is a new rom I recommed you to make backups just in case.
Bassion said:
This wipe everything?
Click to expand...
Click to collapse
If you use the HOME.CSC it does not wipe the phone.
Tetraguy said:
Yes it did for me since I had Verizon's CSC installed. but since is a new rom I recommed you to make backups just in case.
Click to expand...
Click to collapse
@Tetraguy - THANKS!! I downloaded that 2.3GB file in 4 minutes via Google Drive share as opposed to Sam Mobile people keep referencing. We should get this on Android Files site too!
http://thunderztech.com/download-g935tuvu4bqb1-stable-nougat-update-for-t-mobile-s7-edge-g935t/
TOP 5 Solid Reasons Nougat is improved over Marsh:
1) Direct Boot
2) File-based Encryption
3) Number blocking/call screening
4) Faster, Refined, Optimized over Marsh
5) Notifications: redesigned, bundled and Quick Reply-able
#3: Number Blocking/Call Screening! DEATH to RoboCalls!
Android 7.0 features an advanced number blocking and call screening platform that provides users with complete control over unwanted callers and unknown numbers. Carrier integration also means numbers you’ve blocked through the dialer can be blocked via all mediums, including VOIP and call forwarding. Number blocking can also block texts and allow multiple apps to use the blocked numbers list for more system-wide blocking support.
I apologize for the noobish question, but I have the latest unlocked firmware ending with APL4(smg935u). To get this, do I just download the file and flash everything through odin? Do I have to flash just parts of the file( like just the ap/cp) or do I flash everything( BL/AP/CP/CSC) The last time I tried to flash tmobile firmware onto my unlocked, I kept getting issues. Been trying to figure this out all morning, but still a little confused. Any help will be greatly appreciated
kng3025 said:
I apologize for the noobish question, but I have the latest unlocked firmware ending with APL4(smg935u). To get this, do I just download the file and flash everything through odin? Do I have to flash just parts of the file( like just the ap/cp) or do I flash everything( BL/AP/CP/CSC) The last time I tried to flash tmobile firmware onto my unlocked, I kept getting issues. Been trying to figure this out all morning, but still a little confused. Any help will be greatly appreciated
Click to expand...
Click to collapse
I believe you can just flash without any prep work (aside from backing up your data, of course). To my knowledge, most of the G935 firmwares are interchangeable in that even if you get stuck you can always flash your stock ROM again. I'm on AT&T running Tmo MM just fine. All I had to do was update APN afterward so it could talk with the AT&T network. As I understand it, per the above post you can flash the "HOME CSC" to avoid data deletion. I would still backup whatever you can via adb or whatever program you favor.
disturbd1 said:
I believe you can just flash without any prep work (aside from backing up your data, of course). To my knowledge, most of the G935 firmwares are interchangeable in that even if you get stuck you can always flash your stock ROM again. I'm on AT&T running Tmo MM just fine. All I had to do was update APN afterward so it could talk with the AT&T network. As I understand it, per the above post you can flash the "HOME CSC" to avoid data deletion. I would still backup whatever you can via adb or whatever program you favor.
Click to expand...
Click to collapse
Thanks for this. I have all the files loaded up in Odin but haven't hit the button yet. I have a G935U. Do you know if there is anything that prevents downgrading back to 6.0.1, since that's where my stock firmware currently is? And also, it's safe to flash the bottloader and all the rest, to my G935U? Thx!
kng3025 said:
I apologize for the noobish question, but I have the latest unlocked firmware ending with APL4(smg935u). To get this, do I just download the file and flash everything through odin? Do I have to flash just parts of the file( like just the ap/cp) or do I flash everything( BL/AP/CP/CSC) The last time I tried to flash tmobile firmware onto my unlocked, I kept getting issues. Been trying to figure this out all morning, but still a little confused. Any help will be greatly appreciated
Click to expand...
Click to collapse
Did that in mine and worked. I'm brazilian and both U and T versions of Marsh didn't have pt-BR language.
Nougat has \o/ \o/
Now i'm waiting U nougat version to keep away from T-Mobile trash.
Cabeção-Flu said:
Did that in mine and worked. I'm brazilian and both U and T versions of Marsh didn't have pt-BR language.
Nougat has \o/ \o/
Now i'm waiting U nougat version to keep away from T-Mobile trash.
Click to expand...
Click to collapse
Did you flash all 4 files of the firmware? BL, AP, CP, and CSC?
YrrchSebor said:
Did you flash all 4 files of the firmware? BL, AP, CP, and CSC?
Click to expand...
Click to collapse
Yes, sir. Fully wiped.
Everything seems working and very smooth. :good:
Cabeção-Flu said:
Yes, sir. Fully wiped.
Everything seems working and very smooth. :good:
Click to expand...
Click to collapse
Crazy that TMO got it before 935U!
YrrchSebor said:
Thanks for this. I have all the files loaded up in Odin but haven't hit the button yet. I have a G935U. Do you know if there is anything that prevents downgrading back to 6.0.1, since that's where my stock firmware currently is? And also, it's safe to flash the bottloader and all the rest, to my G935U? Thx!
Click to expand...
Click to collapse
That, I don't know; going back. I'll leave it up to a more seasoned veteran to answer the question about the bootloader version. My understanding is that the G935U is identical in terms of the hardware it has and the software it runs (sans bloatware from carriers), so in my mind it doesn't seem like you'd have to worry about it failing.

[Q] Can we Downgrade SM-G930FD from 7.0 to 6.1 ????????

Can we downgrade SM-G930FD from 7.0 to 6.1. dual sim india model exynos.
not rooted ever
stock rom
bootloader locked.
if i simply flash 6.1 firmware from odin will it brick my device as i guess bootloaders are different in 7 and 6.
When you flash with Odin you should be flashing 4 files (AP, BL, CP, CSC) one of which is the bootloader (BL). So long as you download the correct BL for MM6.1 it should be fine.
Is downgrade possible ? i read somewhere that we cant downgrade because of the new locked bootloader. can some experienced person shed light on this ?
That might be true for the US models, but the 930F and 930FD bootloaders are unlockable.
Also correct me if I'm wrong, but flashing stock firmware is meant to work even if the bootloader is locked. It's only custom firmware that should be a problem.
mor_1228 said:
Can we downgrade SM-G930FD from 7.0 to 6.1. dual sim india model exynos.
not rooted ever
stock rom
bootloader locked.
if i simply flash 6.1 firmware from odin will it brick my device as i guess bootloaders are different in 7 and 6.
Click to expand...
Click to collapse
Can confirm this works, did it like a week ago on my SM-G930F.
Just be sure to flash AP,BL,CP and CSC, as @Beanvee7 mentioned
jaannnis said:
Can confirm this works, did it like a week ago on my SM-G930F.
Just be sure to flash AP,BL,CP and CSC, as @Beanvee7 mentioned
Click to expand...
Click to collapse
so u mean to say. i can flash 6.1 on 7.0 with locked bootloader just by simply flashing all these files in odin ?
mor_1228 said:
so u mean to say. i can flash 6.1 on 7.0 with locked bootloader just by simply flashing all these files in odin ?
Click to expand...
Click to collapse
Am pretty sure, but you will lose your files as you cant take the home_csc to downgrade (I believe??). Why not just try? Backup your stuff and in worst case just flash the 7.0 back.
jaannnis said:
Am pretty sure, but you will lose your files as you cant take the home_csc to downgrade (I believe??). Why not just try? Backup your stuff and in worst case just flash the 7.0 back.
Click to expand...
Click to collapse
but if i bricked my device then ?
mor_1228 said:
but if i bricked my device then ?
Click to expand...
Click to collapse
G930FD can use G930F firmware, I have successfully flashed from 7.0 to 6.0.1 a couple of times on my G930F
You will need to use CSC not HOME_CSC as nothing from 7.0 will work with 6.0.1 and you'll either bootloop or get lots of app crashes on boot
*Detection* said:
G930FD can use G930F firmware, I have successfully flashed from 7.0 to 6.0.1 a couple of times on my G930F
You will need to use CSC not HOME_CSC as nothing from 7.0 will work with 6.0.1 and you'll either bootloop or get lots of app crashes on boot
Click to expand...
Click to collapse
where will i get this csc and not home csc
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i got this from g930fd file. so in this
i should not use home_csc and should use all other files ?
mor_1228 said:
i got this from g930fd file. so in this
i should not use home_csc and should use all other files ?
Click to expand...
Click to collapse
Already been explained to you, use CSC and not HOME_CSC, yes all the others too
*Detection* said:
Already been explained to you, use CSC and not HOME_CSC, yes all the others too
Click to expand...
Click to collapse
i read in other threads people are facing issues after downgrading like apps behaving funny camera not working . did u also faced the same ?
mor_1228 said:
i read in other threads people are facing issues after downgrading like apps behaving funny camera not working . did u also faced the same ?
Click to expand...
Click to collapse
Did you read anything I wrote?
You made this thread 2 weeks ago, you could have tested it yourself many times by now
Either try it or don't
If you flash all 4 files you should have no issues.
Issues like you described are when people change android version using TWRP flashing ROM's, then they end up with bootloader mismatches etc.
That can't happen to you because you're cleanly flashing all 4 firmware files to a matching version.
*Detection* said:
Did you read anything I wrote?
You made this thread 2 weeks ago, you could have tested it yourself many times by now
Either try it or don't
Click to expand...
Click to collapse
its better to know the + - before flashing anything. flashing anything like stupid and crying later is not what i need. u r most welcome to help.
can i use ? Odin3_v3.10.6 or ODIN 3.12.3 ?????
mor_1228 said:
its better to know the + - before flashing anything. flashing anything like stupid and crying later is not what i need. u r most welcome to help.
can i use ? Odin3_v3.10.6 or ODIN 3.12.3 ?????
Click to expand...
Click to collapse
All the information is already here on XDA S7 forums many times over in many different threads, if you read some threads
No need for multiple ? either, we can see one just fine
Use the latest odin, there's a full update guide on updato.com with a link to the latest version of odin
i am back on 6.0.1 on december build.
but feels bit laggy and battery drain alot android OS.
is there any better version that i can flash rather than december build.
when i got the new device my mobile was fast and good battery life.
my device is manufactured of july 2016 so i guess the firmware must be pre installed of earlier than july.
so is there any firmware 6.0.1 which is faster than other build or is it a myth only ?
The differences between months would mostly be security updates, I doubt there is any major under the hood changes that would impact performance. Did you phone come with carrier bloat originally? Could be that you just need to debloat.

Is it possible to Flash SM-G955W firmware on SM-G955U

As the title says, Is it possible to Flash SM-G955W firmware on SM-G955U from sammobile.
PhoneInfo app screenshots:
General/Model:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CSC Code:
Firmware:
_abc said:
As the title says, Is it possible to Flash SM-G955W firmware on SM-G955U from sammobile.
PhoneInfo app screenshots:
General/Model:
CSC Code:
Firmware:
Click to expand...
Click to collapse
i know the samfail partcyborg rom does it
TheMadScientist said:
i know the samfail partcyborg rom does it
Click to expand...
Click to collapse
Thanks for the reply. I searched on xda and it seems it will most likely trip knox. Is it possible with the official firmware from sammobile using odin?
_abc said:
Thanks for the reply. I searched on xda and it seems it will most likely trip knox. Is it possible with the official firmware from sammobile using odin?
Click to expand...
Click to collapse
Partcyborg rom does not trip knox as it does not unlock the bootloader
TheMadScientist said:
Partcyborg rom does not trip knox as it does not unlock the bootloader
Click to expand...
Click to collapse
A..are you serious?
turboedm said:
A..are you serious?
Click to expand...
Click to collapse
Yes as the boot-loader is not unlocked Knox is not tripped on snapdragon S8s we do not have twrp or custom roms besides the one....
But as we have locked boot-loaders that is a perk to it as Knox is nearly untrippable
TheMadScientist said:
Yes as the boot-loader is not unlocked Knox is not tripped on snapdragon S8s we do not have twrp or custom roms besides the one....
But as we have locked boot-loaders that is a perk to it as Knox is nearly untrippable
Click to expand...
Click to collapse
Doesn't root break samsung pay though? That ROM comes pre-rooted.
turboedm said:
Doesn't root break samsung pay though? That ROM comes pre-rooted.
Click to expand...
Click to collapse
That it does it does break pay
I have never went through the csc switch so i do not know the exacts to it but it could be as easy as just flashing the u1 firmware and which you pick determined by which bootloader your on now
TheMadScientist said:
That it does it does break pay
Click to expand...
Click to collapse
Yeah, Samsung Pay is used on a daily basis for me. Unfortunately I can't use a custom ROM if it's rooted
Most people go from W to U not the other way but I dont see why it wouldnt work
TheMadScientist said:
Yes as the boot-loader is not unlocked Knox is not tripped on snapdragon S8s we do not have twrp or custom roms besides the one....
But as we have locked boot-loaders that is a perk to it as Knox is nearly untrippable
Click to expand...
Click to collapse
How do I tell if the boot loader is locked or not? I booted to Download mode at it doesn't say anything about boot loader there.
_abc said:
How do I tell if the boot loader is locked or not? I booted to Download mode at it doesn't say anything about boot loader there.
Click to expand...
Click to collapse
They are all locked all the us snapdragons and ws only china and exynos has unlockable
There is basically nothing you can do to trip knox
All of us that test and those that dev
I have tested some pretty righteous stuff and still no knox trip Infact mine is currently on its way to the repair center for stuff I flashed just testing some theory out..... but it was major stuff not just with the rom or anything I dont want to scare you....
Trying this
Hi there,
So I am trying exactly this (flashing an SM-G955U with firmware for SM-G955W). My reason for doing this is I am hoping that it will improve the reception since SM-G955W is the Bell Mobility firmware and I am on Bell Mobility in Canada.
I have tried Odin 3.13.1 and 3.12.5. I got my firmware from SamMobile.com. This is the link to the exact firmware I downloaded:
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955W/BMC/download/G955WVLU5BRG4/230118/
I put my device into bootloader (power off, power on with Power+Bixby+Volume Down) and when I try to flash I get FAIL! SHA256 is invalid in Odin.
Any suggestions? Am I missing something?
I do not want to root my device. Just flash with stock firmware to re-brand it for the carrier I am using. I want this phone to be as if I purchased it from Bell directly if at all possible. Or should I be using the generic "Canada (XAC)" firmware instead of the BMC firmware? I can get the XAC firmware here:
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955W/XAC/download/G955WVLU5BRG4/230670/
OK, slight update on this. If I use the PrinceComsey edition or Odin found here:
https://drive.google.com/file/d/1dzNPNe2SPVPr2FR1R9aPmbiENajzRsMN/view?usp=sharing I can get it loading but it loads to my phone real quick (doesn't seem like it transfers everything) and then reboots and my phone is still running the same firmware (with all my apps installed, etc) as before.
Thanks,
The Fish
I recently went from bootloader 5 G955u to g955w. Phone was carrier unlocked. Need a combination rom and a rom from your desired canadian cell provider with same bootloader version.
Follow the carrier switching steps. Then follow the flashing standard firmware steps.
https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
avo1213 said:
I recently went from bootloader 5 G955u to g955w. Phone was carrier unlocked. Need a combination rom and a rom from your desired canadian cell provider with same bootloader version.
Follow the carrier switching steps. Then follow the flashing standard firmware steps.
https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
Click to expand...
Click to collapse
I am really interested in how you did this. I keep getting a fail at step 13 in the "Carrier Switching" section. The only thing I can think of is that I am using 3.13.1 and his guide says (under step 6) that I should be using Odin 3.12.7 but I am using the one from the download links the author provides in his post.
The failure message I get on my phone itself is SW REV CHECK FAIL: [abl]Fused 5 > Binary 2 which makes me think this has something to do with the bootloader being at version 5?
Any tips would be greatly appreciated!!
The Fish
thefish123 said:
I am really interested in how you did this. I keep getting a fail at step 13 in the "Carrier Switching" section. The only thing I can think of is that I am using 3.13.1 and his guide says (under step 6) that I should be using Odin 3.12.7 but I am using the one from the download links the author provides in his post.
The failure message I get on my phone itself is SW REV CHECK FAIL: [abl]Fused 5 > Binary 2 which makes me think this has something to do with the bootloader being at version 5?
Any tips would be greatly appreciated!!
The Fish
Click to expand...
Click to collapse
OK, just to answer my own question(s) and document this for Google. I successfully carrier switched my SM-G955U to Bell and it now reports that it actually is an SM-G955W.
You need version 5 of everything (boot loader, factory ROM, HOME_CSC, etc). You also need to use the new “3b” Patched Odin 3.13.1 by realbbb available here:
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572. Otherwise I could not flash the HOME_CSC file.
Basically you can follow the instructions here:
https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
But replace the references to Prince Comsy Odin with the 3b patched Odin. In fact I think you can use 3b patched Odin in place of “standard” Odin as well.
Regards,
The Fish

Question SM-A326U Combination Firmware

US Combination Firmware link for Galaxy A32 5G
Supposedly you can FRP bypass or OEM unlock based on what I've heard
Google Drive - Virus scan warning
drive.google.com
TypicalGellert said:
US Combination Firmware link for Galaxy A32 5G
Supposedly you can FRP bypass or OEM unlock based on what I've heard
Google Drive - Virus scan warning
drive.google.com
Click to expand...
Click to collapse
Have you tested this approach? If yes, then can you provide instruction.
TIA
furballi said:
Have you tested this approach? If yes, then can you provide instruction.
TIA
Click to expand...
Click to collapse
I tried last night but it wouldn't flash Odin kept failing it, so I'm going to try to find a different combo Firmware and re-up with the new link to it once I know the new one works.... In the meantime y'all could try that to see if you get a different result with flashing it
TypicalGellert said:
I tried last night but it wouldn't flash Odin kept failing it, so I'm going to try to find a different combo Firmware and re-up with the new link to it once I know the new one works.... In the meantime y'all could try that to see if you get a different result with flashing it
Click to expand...
Click to collapse
I am also going to try using Frija to download the TMK version which is apparently another US unlocked variant Firmware to see if that might flash and go from there
TypicalGellert said:
I am also going to try using Frija to download the TMK version which is apparently another US unlocked variant Firmware to see if that might flash and go from there
Click to expand...
Click to collapse
Thanks. Will post if I find a solution.
T Mo and Samsung are not playing nice. I was able to completely remove the T Mo app with the Samsung A21, but no luck with the A32 5G (using ADB). Also removed over 200 junk apps from the A32 5G. My goal was to get it as bare-bone as the A21. Yet the A32 still pull about 1.3 GB of RAM vs. 930 MB for the A21, with the major difference being Android 11 vs. Android 10. Apparently, the claim about better memory management in Android 11 does not pan out in actual use. The Android 6 in my ZTE V8 Pro is lightning fast compared to Android 11.
Most people are not aware of the tremendous amount of spyware that are hidden on these Samsung phones (Amazon, Microsoft, etc). The OS is free, but informed users should have the option to easily remove these junk apps with a few keystrokes.
TypicalGellert said:
I tried last night but it wouldn't flash Odin kept failing it, so I'm going to try to find a different combo Firmware and re-up with the new link to it once I know the new one works.... In the meantime y'all could try that to see if you get a different result with flashing it
Click to expand...
Click to collapse
I'm new to this device and still figuring things out. Meanwhile, came across this post that gives different versions of Odin to try with. https://www.droidwin.com/create-samsung-combination-firmware-flash-it-via-odin/
TypicalGellert said:
I tried last night but it wouldn't flash Odin kept failing it, so I'm going to try to find a different combo Firmware and re-up with the new link to it once I know the new one works.... In the meantime y'all could try that to see if you get a different result with flashing it
Click to expand...
Click to collapse
You have to use a patched version of Odin.
TypicalGellert said:
I am also going to try using Frija to download the TMK version which is apparently another US unlocked variant Firmware to see if that might flash and go from there
Click to expand...
Click to collapse
TMK is T-Mobile not unlocked varient.
Crossflashing to unlocked/bloat-free firmware works just fine.
gamer765 said:
Crossflashing to unlocked/bloat-free firmware works just fine.
Click to expand...
Click to collapse
More info please? Were you able to flash a different firmware on a Tmobile device and unlock bootloader with it?
If yes, can you confirm that the phone works fine and give the rest of us step by step instructions?
gamer765 said:
Crossflashing to unlocked/bloat-free firmware works just fine.
Click to expand...
Click to collapse
Did you crossflash to A326U1 XAA firmware?
how did you managed to do that without unlock bootloader
financeledger said:
Did you crossflash to A326U1 XAA firmware?
how did you managed to do that without unlock bootloader
Click to expand...
Click to collapse
ODIN, You never have to be bootloader unlocked for that on Samsung Devices.
hyelton said:
ODIN, You never have to be bootloader unlocked for that on Samsung Devices.
Click to expand...
Click to collapse
then i am missing something i am trying with Odin to flash the A326u1 XAA and get only fail.
pressing Volumey kesyw while inserting usb i never get into DL mode for flashing
Don't PM me please.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gamer765 said:
Don't PM me please.
Click to expand...
Click to collapse
Wont get pms if you share info
Did you use combination from this thread?
Did nothing special, same procedure as with all other Samsung phones. Flash U1 firmware on top of U firmware. Don't see what's so difficult about it. @hyelton also mentioned how he did it as well.
gamer765 said:
Did nothing special, same procedure as with all other Samsung phones. Flash U1 firmware on top of U firmware. Don't see what's so difficult about it. @hyelton also mentioned how he did it as well.
Click to expand...
Click to collapse
newb here just wanted to make sure it was same steps thanks for that
(OS11/Sprint/SPR)
(OS11/MetroPCS/TMK)
(OS11/US Cellular/USC)
(OS11/T-Mobile/TMB)
Using Odin Patched 3B v3.14.1 and I’m receiving a truncate message stating the following:
sw rev check fail [vbmeta[fused 2 > bi
I’m using the SM-A326U1 for Product Code TMB from April 19, 2021. The phone now boots up with a blue screen ”An error has occurred while updating the device software”. Any suggestions?
CSC seems to fail at boot.img per Odin
CSC_HOME fails at preloader.img
——— Update ——-
Flashed latest TMK using Patched Odin 3.14.1 and the device is functional again.
tavella said:
Using Odin Patched 3B v3.14.1 and I’m receiving a truncate message stating the following:
sw rev check fail [vbmeta[fused 2 > bi
I’m using the SM-A326U1 for Product Code TMB from April 19, 2021. The phone now boots up with a blue screen ”An error has occurred while updating the device software”. Any suggestions?
CSC seems to fail at boot.img per Odin
CSC_HOME fails at preloader.img
Click to expand...
Click to collapse
bricked im on the same roadif you find way out let me know
edit : just debricked real easy using odin 3b patch last version and A326USQU2AUD9_A326UOYN2AUD9_TMB

Categories

Resources