MIUI 7 Rom launcher overlapping icons! - Micromax Canvas 2 Plus A110Q

I am new to XDA
A few days ago I downloaded the MIUI 6 Rom for our phone....absolutely fantastic Rom. I got an OTA update (MIUI 7 5.8.27) through the rom...which was for MT6589. I flashed the OTA but it has some bugs. I think the framework is not optimized which causes this issue. As I am new to all this I don't know what I should do. Please someone help me...please tell what file needs to be optimized or ported..is it the framework-res.apk?
I have already tried the build property ro.sf.lcd_density=200/210. It doesnt help.

himanlovestesla said:
I am new to XDA
A few days ago I downloaded the MIUI 6 Rom for our phone....absolutely fantastic Rom. I got an OTA update (MIUI 7 5.8.27) through the rom...which was for MT6589. I flashed the OTA but it has some bugs. I think the framework is not optimized which causes this issue. As I am new to all this I don't know what I should do. Please someone help me...please tell what file needs to be optimized or ported..is it the framework-res.apk?
I have already tried the build property ro.sf.lcd_density=200/210. It doesnt help.
Click to expand...
Click to collapse
I am new too on xda... But i recommend you to flash miui 7 new version using cwm... This will worked fine...i am also faced some problems during an OTA Update...

Related

Help Please

Im a newb here but heres my question oh yah hello everyone lol
1. When i go to download the live wallpaper that was posted here by bonsai on the new bonsai 3.0.1 it says not installed when i click install...
2. Also on the new bosai rom can't get hulu to wrk when you flash it sys something like not comatable..
3.
Thanks
ROM
Check your ROM version. Android version may be different than your stock version and will not work right with the ROM you installed. You also have to be careful on which ROMs you are installing as you may get an incomplete one that has many bugs.

Problem turn off phone

Hey all i have a problem whit my lg p500,a week ago i flashed rom "oxygen 2.3.3" and my phone get turn off when i dont know (..i think cuz rom have bugs and i chose to change it,i find Miui 2.3.7 i instaled and this problem repeat again i find my phone off what i can do? please help me
"
Dont overclock too much.
729>
Issues with some specific build
BlackHeartt said:
Hey all i have a problem whit my lg p500,a week ago i flashed rom "oxygen 2.3.3" and my phone get turn off when i dont know (..i think cuz rom have bugs and i chose to change it,i find Miui 2.3.7 i instaled and this problem repeat again i find my phone off what i can do? please help me
"
Click to expand...
Click to collapse
When I used Cyagenmod 10 - specific builds I faced this issue. Later they fixed it.
FYI. Currently I am using the PAC version 19.9.0 ( Android 4.2.1) for my LG Optimus one P500 phone. It is giving some great look and feel. Smooth operations. Still Battery draining and 'no FM radio' support is the major minus in this build.
Hello
rameshkvp said:
When I used Cyagenmod 10 - specific builds I faced this issue. Later they fixed it.
FYI. Currently I am using the PAC version 19.9.0 ( Android 4.2.1) for my LG Optimus one P500 phone. It is giving some great look and feel. Smooth operations. Still Battery draining and 'no FM radio' support is the major minus in this build.
Click to expand...
Click to collapse
I find ,i tested now , you phone dont rebot on this rom?dont have problem whit this ?

[Q] Kernel is not seandroid enforcing

First of all, Ive searched regarding this error a lot and am hoping someone can clarify.
I "mistakenly" updated to the stock kitkat 4.4.2 that was released for the Galaxy s4 recently and after realising how crap it was, i installed a recovery manager and loaded on the Google play edition rom by Danvdh
http://forum.xda-developers.com/showthread.php?t=2539361
The rom works great and for the most part my phone works. But every now and then randomly it reboots and then will show Kernel is not seeandroid enforcing. Im assuming the error is due to the fact that I installed stock kitkat.
Am I able to circumvent this error by installing a different kernel? and Is the error related to the random bootloops?
Any help would be much appreciated.
Daikonran said:
First of all, Ive searched regarding this error a lot and am hoping someone can clarify.
I "mistakenly" updated to the stock kitkat 4.4.2 that was released for the Galaxy s4 recently and after realising how crap it was, i installed a recovery manager and loaded on the Google play edition rom by Danvdh
http://forum.xda-developers.com/showthread.php?t=2539361
The rom works great and for the most part my phone works. But every now and then randomly it reboots and then will show Kernel is not seeandroid enforcing. Im assuming the error is due to the fact that I installed stock kitkat.
Am I able to circumvent this error by installing a different kernel? and Is the error related to the random bootloops?
Any help would be much appreciated.
Click to expand...
Click to collapse
Hi,
Generally you must flash the same kernal which has come with the installation ZIP, Please check if you are using a different kernal and the ROM.
This happened with me , as i was using a CWM nightly Kernal with a PAC ROM, which didnt worked for me.
It worked when i got a Kernal build by the PAC itself.
Hope this might answer your query
atuldarne said:
Hi,
Generally you must flash the same kernal which has come with the installation ZIP, Please check if you are using a different kernal and the ROM.
This happened with me , as i was using a CWM nightly Kernal with a PAC ROM, which didnt worked for me.
It worked when i got a Kernal build by the PAC itself.
Hope this might answer your query
Click to expand...
Click to collapse
Well I havent changed anything yet. I am using the same kernel that came with the Google play rom that I installed.

[Q] Still on stock 4.1.2, any better option/ROM available yet?

Hi, I'm kinda new here, bought the tablet only few days ago and didn't play with it too much,
Have updated to the latest official version (4.1.2) and rooted.
I'm on N8013.
I saw the half-way leaked version of the kitkat on the general post but it says no word if it fits for anything else but N8000.
I don't really care for Kitkat but 4.1.2 is too old..
Any stable release / ROM with TW for a newer version? (I prefer stock)
kinda hard to tell since most of the posts are from 2012 and I have never been to any of them.. you probably know better than I do.
Thanks !
The leaked rom works fine on my N8013, I didn't even have to wipe out my device, kept all my apps from 4.1.2 to 4.4.2. Unfortunately, there is no other versions of Samsung's rom between 4.1.2 and 4.4.2. If you really want to upgrade, I think the leaked rom works fine. As long as you have made a backup in some recovery, you shouldn't have much to worry about.
mcjordan92 said:
Hi, I'm kinda new here, bought the tablet only few days ago and didn't play with it too much,
Have updated to the latest official version (4.1.2) and rooted.
I'm on N8013.
I saw the half-way leaked version of the kitkat on the general post but it says no word if it fits for anything else but N8000.
I don't really care for Kitkat but 4.1.2 is too old..
Any stable release / ROM with TW for a newer version? (I prefer stock)
kinda hard to tell since most of the posts are from 2012 and I have never been to any of them.. you probably know better than I do.
Thanks !
Click to expand...
Click to collapse
The leaked KitKat verion is for testing purpose only, many features disabled.
Stock or close to stock ROM is available, ARHD is the one.
I'm using ARHD for years now & it's very stable.
Read carefully & understand everything on the ARHD thread before doing anything.
d4rkkn16ht said:
The leaked KitKat verion is for testing purpose only, many features disabled.
Stock or close to stock ROM is available, ARHD is the one.
I'm using ARHD for years now & it's very stable.
Read carefully & understand everything on the ARHD thread before doing anything.
Click to expand...
Click to collapse
All the features work. You can flash a deodexed rom, install some mods, and you are good to go
Verstuurd vanaf mijn SM-P905 met Tapatalk
Hmm ARHD = revolution?
If so it is also 4.1 so it ain't worth switching. ?
If not please link me..
And about the leaked 4.4.. what do you mean not all features are enabled?
Could you say which? And deodexed run over the disability? Is it stable enough?
I really have no time and effort to fight with mess and bugs..
Thank you for your tips
mcjordan92 said:
Hmm ARHD = revolution?
If so it is also 4.1 so it ain't worth switching. ?
If not please link me..
And about the leaked 4.4.. what do you mean not all features are enabled?
Could you say which? And deodexed run over the disability? Is it stable enough?
I really have no time and effort to fight with mess and bugs..
Thank you for your tips
Click to expand...
Click to collapse
ARHD = Android Revolution HD
ARHD is the best close to stock 4.1.2 ROM I've ever use. (I have HTC Sensation & GT-N8000 all using ARHD)
Right now there is no Stock KitKat for N8000/8013/8010/8020
All you can get is LEAKED version of KitKat which is only for TESTING purpose, so don't expect to get all features working.
Some "testers" said they get all features working, some said WiFi is not working.
I will not recommend you to flash it, at least wait for official release.
Official KitKat release may be very different / may have features not in the Leaked TEST ROM
[GT-N8000][Leaked firmware] N8000XXUDND5 (Android 4.4) - Open Europe (OXA) [26-04-14]
NOTE:
Mike, the ARHD chef, said he will cook KitKat ROM as soon as the official release out on the net
Lord Boeffla also said that he will make KitKat version of Boeffla Kernel as soon as the official release is there.
Running the Gnabo ROM V1
mcjordan92 said:
Hi, I'm kinda new here, bought the tablet only few days ago and didn't play with it too much,
Have updated to the latest official version (4.1.2) and rooted.
I'm on N8013.
I saw the half-way leaked version of the kitkat on the general post but it says no word if it fits for anything else but N8000.
I don't really care for Kitkat but 4.1.2 is too old..
Any stable release / ROM with TW for a newer version? (I prefer stock)
kinda hard to tell since most of the posts are from 2012 and I have never been to any of them.. you probably know better than I do.
Thanks !
Click to expand...
Click to collapse
I have installed and running Gnabo ROM V1.
It is a great ROM , it seems that on my N8013 if you take away the fact that my WiFi does some 'lags' everything works simply fine.
Stratos
mcjordan92 said:
Hi, I'm kinda new here, bought the tablet only few days ago and didn't play with it too much,
Have updated to the latest official version (4.1.2) and rooted.
I'm on N8013.
I saw the half-way leaked version of the kitkat on the general post but it says no word if it fits for anything else but N8000.
I don't really care for Kitkat but 4.1.2 is too old..
Any stable release / ROM with TW for a newer version? (I prefer stock)
kinda hard to tell since most of the posts are from 2012 and I have never been to any of them.. you probably know better than I do.
Thanks !
Click to expand...
Click to collapse
Why dont u try Gnobo ROM or Offiical 4.4.2 Firmware Here
LiMITZERO said:
Why dont u try Gnobo ROM or Offiical 4.4.2 Firmware Here
Click to expand...
Click to collapse
Thank you.. what is more stable? the gnabo or the link you brought?
also could you please link gnabo too? I really can't find it
Advising Caution!!!!!!!!!!!!
mcjordan92 said:
Thank you.. what is more stable? the gnabo or the link you brought?
also could you please link gnabo too? I really can't find it
Click to expand...
Click to collapse
Please tell us your ability and experience flashing roms? Using cwm/ twrp recovery. Do you know and understand adb? Have you ever flashed a device and know how to backup before doing so?
The above efforts MUST be something you need to understand Before you Flash anything.
The note tablet is to expensive to go flashing without knowing how to get back and recover if you have issues.
With the above said.. The issue with the stock 8000 rom and the leak is Bootloader . Changes your tablet info to look likes its a 8000 instead of 8xxx . In the past when the Stock firmware for your device is released you have been able to get back to the correct version for your device. BUT WELL BUT We or nobody can tell you for sure..
Again read read and think . Most important read the threads and post from people who have went back to 4.1 stock for there Device.
I know my post may sound Confusing. If so DO NOT FLASH your device.IF you know all of this already Sorry for the post. Just dont wanna see a help I'M
BRICKED POST from anyone
Good Luck..
ohh im on 4.1 rom Tweaked by me For my own use. I do not make roms for public use because i'm Not that smart or have time to help with issues .And most on here would not appreciate pink purple and floral UI.. Giggles.
erica_renee said:
Please tell us your ability and experience flashing roms? Using cwm/ twrp recovery. Do you know and understand adb? Have you ever flashed a device and know how to backup before doing so?
The above efforts MUST be something you need to understand Before you Flash anything.
The note tablet is to expensive to go flashing without knowing how to get back and recover if you have issues.
With the above said.. The issue with the stock 8000 rom and the leak is Bootloader . Changes your tablet info to look likes its a 8000 instead of 8xxx . In the past when the Stock firmware for your device is released you have been able to get back to the correct version for your device. BUT WELL BUT We or nobody can tell you for sure..
Again read read and think . Most important read the threads and post from people who have went back to 4.1 stock for there Device.
I know my post may sound Confusing. If so DO NOT FLASH your device.IF you know all of this already Sorry for the post. Just dont wanna see a help I'M
BRICKED POST from anyone
Good Luck..
ohh im on 4.1 rom Tweaked by me For my own use. I do not make roms for public use because i'm Not that smart or have time to help with issues .And most on here would not appreciate pink purple and floral UI.. Giggles.
Click to expand...
Click to collapse
Very thanks for your warning!
I'm well based by switching ROMs in my last 2 phones and few others some times..
My new GN tablet is only rooted so this would be my first one..
I'm of course gonna nandroid backup and read the special instructions before switching.. the big reason for this long post thread is to save me precious time of trying each of any ROMs and testing it..
mcjordan92 said:
Very thanks for your warning!
I'm well based by switching ROMs in my last 2 phones and few others some times..
My new GN tablet is only rooted so this would be my first one..
I'm of course gonna nandroid backup and read the special instructions before switching.. the big reason for this long post thread is to save me precious time of trying each of any ROMs and testing it..
Click to expand...
Click to collapse
I understand..
For me with the Note 10.1 and even my note 2 phone. I bought it for the s-pen capability. For me i have tried many roms and yes each has there own advantages. Not saying nothing bad about any of them. As i have took some small pieces from some Like frame work changes for my Slightly modified Stock. But I still think for the Note line .. Stock is the best solution for those who bought it for the s-pen and muli window Real work able tablet i think Stock or VERY Near is Best.
The Developers on the note devices have much more to deal with then many others due to the S-pen features and they are awesome at it .
Have installed the Gnabo ROM.. Looks cool.. Let's hope it won't makes me troubles
Sent from my Xperia Z.
mcjordan92 said:
Have installed the Gnabo ROM.. Looks cool.. Let's hope it won't make me troubles
Sent from my Xperia Z.
Click to expand...
Click to collapse
Sent from my Xperia Z.
s-pen apps
mcjordan92 said:
Have installed the Gnabo ROM.. Looks cool.. Let's hope it won't makes me troubles
Sent from my Xperia Z.
Click to expand...
Click to collapse
Hello mcjordan,
Do you made experiences with the new rom?
Especially: works the s-pen apps (s-note, handwriting)?
Regards
Dr.Sahnebacke said:
Hello mcjordan,
Do you made experiences with the new rom?
Especially: works the s-pen apps (s-note, handwriting)?
Regards
Click to expand...
Click to collapse
I actually reflashed the stock kitkat version linked by some 1 here..
It seems to be more stable and has the default stock tw apps.. I actually prefer the old s note app over the new one so now I have both..
Also got back the defalt samaung keyboard which has the ability to handwriting recognation.. Gnabo didnt have it..
Sent from my Xperia Z.

Stucked on 9.6.4.0

Hello guys ! I just bought this mix 2s a couple of days ago. Also this is my first experience with MIUI so please if I ask something stupid or retarded just forgive me .
When I took the phone out of the box it updated right away to 9.6.4.0 , but as we all know MIUI 10 is already out there for a while . Still my phone doesn't find any update to MIUI 10.
I saw that I can download the firmware from MIUI website and flash it through the update section three dots etc . But since this is my first experience with MIUI I don't know what to think about this flashing method and if I should wait longer for ota or I'm stuck somehow on this version or if I should update like I mentioned before.
Some advice please ? Cheers !
Updating by downloading firmware and using the updater app is safe but decide whether you want to stay on the stable ROM (which normally gets updated monthly) or the developer (which normally gets updated weekly). The MIUI Developer ROM is more stable and bug free than any "stable" version of Oxygen I ran when I had an OP5 so don't let the developer tag scare you.
I would also strongly recommend doing a complete factory reset after upgrading from MIUI 9 to MIUI 10 or Android Oreo to Pie so you get the best user experience. You might end up with some buggy behavior otherwise and since you just got the phone and aren't familiar with MIUI you might not realize that something isn't working like it should.
jhs39 said:
Updating by downloading firmware and using the updater app is safe but decide whether you want to stay on the stable ROM (which normally gets updated monthly) or the developer (which normally gets updated weekly). The MIUI Developer ROM is more stable and bug free than any "stable" version of Oxygen I ran when I had an OP5 so don't let the developer tag scare you.
I would also strongly recommend doing a complete factory reset after upgrading from MIUI 9 to MIUI 10 or Android Oreo to Pie so you get the best user experience. You might end up with some buggy behavior otherwise and since you just got the phone and aren't familiar with MIUI you might not realize that something isn't working like it should.
Click to expand...
Click to collapse
Well I would like to thank you from the heart for the complex answer ! I was just wondering why my phone can't find the MIUI 10 update if it's already been out for a while. I'm thinking to wait for the Android Pie stable release before I flash a new rom. MIUI 10 has great new features but I'll just wait for MIUI 10 pie. I have to get used to MIUI anyway so I think that I will enjoy 9 while I still have it. Thank you for you time and quick answer! Cheers mate !
boggy27 said:
Hello guys ! I just bought this mix 2s a couple of days ago. Also this is my first experience with MIUI so please if I ask something stupid or retarded just forgive me .
When I took the phone out of the box it updated right away to 9.6.4.0 , but as we all know MIUI 10 is already out there for a while . Still my phone doesn't find any update to MIUI 10.
I saw that I can download the firmware from MIUI website and flash it through the update section three dots etc . But since this is my first experience with MIUI I don't know what to think about this flashing method and if I should wait longer for ota or I'm stuck somehow on this version or if I should update like I mentioned before.
Some advice please ? Cheers !
Click to expand...
Click to collapse
manually update:
download ROM from http://en.miui.com/download-343.html
copy to downloaded_rom folder on phone
select ‘About phone’, click ‘System update’, then press ‘three dots’ icon at the top-right corner, and select ‘choose update package’
boggy27 said:
Hello guys ! I just bought this mix 2s a couple of days ago. Also this is my first experience with MIUI so please if I ask something stupid or retarded just forgive me .
When I took the phone out of the box it updated right away to 9.6.4.0 , but as we all know MIUI 10 is already out there for a while . Still my phone doesn't find any update to MIUI 10.
I saw that I can download the firmware from MIUI website and flash it through the update section three dots etc . But since this is my first experience with MIUI I don't know what to think about this flashing method and if I should wait longer for ota or I'm stuck somehow on this version or if I should update like I mentioned before.
Some advice please ? Cheers !
Click to expand...
Click to collapse
...Or you can download rom, and flash it with MiFlash...it's easy, and fast.
http://en.miui.com/a-232.html
You must have unlocked bootloader.
Thank you very much guys!

Categories

Resources