Database Info

Micromax canvas 3d custom rom

_______________________________________ DGEEEK _________________________________
------------------------------------------------------------Read The whole Post -----------------------------------------------------
_____________________ 4.2.2 ROM FOR CANVAS 3D ___________________
Hi fnds here im present u the custom for micromax canvas 3d and my phone 3d (china) ....
Im not a developer of this custom rom i just port it to our device ...
This take me very long time to port this rom to our device :eek :....
so frnds i use extract system.img of micromax 3d and use as base rom.....:
and i use developer's sagarwep LegoIce™Galaxy S4v2 here is link to his rom http://forum.xda-developers.com/showthread.php?t=2458879
and gave a thanks to him....:good:
features:-
rom is touchwiz customized.
very smooth
samsung dialer
and much more
I am not responsible if you brick your device while flashing,so flash at your risk
Flashing instructions
you must be rooted and flashed custom recovery
Before doing anything take a cwm or twrp backup of your system
Now-
Go To Recovery Mode :
Switch off the Phone Press and hold "Volume Up & Down+ Power" Buttons
Select Recovery Mode by Volume Up
CWM:
1. - wipe data factory reset --> Yes--delete all user data
2. - wipe cache partition --> Yes--Wipe Cache
3. - advanced --> Wipe Dalvik Cache --> Yes--wipe dalvik cache
4, - Mounts and Storage--> format system --> Yes -- format system only
4. - install zip from sd --> - choose zip from sdcard --> - Suvi Rom for Canvas Lite.zip
5. - reboot System now
first boot take some time. so dont panic.
ALL 3D APPS LIKE 3D SPACE IS GONE AFTER FLASHING THE CUSTOM ROM
thanks to:-
(1) My family (without the permission i can't touch my pc )
(2) sagarwep (his legoice rom)
(3) xdadevelopers.com
And guy if u like my work please:angel:
Recharge my mobile number with any amount u want my number service provider is AIRCEL (Delhi India)
MY NUMBER IS
:angel: ( +917503332802 ) :angel:
PLEASE PLEASE PLEASE donate
Please donate to above mobile number to help me out from payment of my internet connection:...
here is the link:- http://d-h.st/NEG
POST 2 ====> NO APP INSTALLED AND MESSAGING FIX PATCH
hey guys i made full bugsfree fix for this rom...:laugh::laugh::laugh::laugh::laugh::laugh:
step 1 : flash the above custom rom properly [see installation instruction above ]
step 2: flash the 4_2_2_fix.zip in cwm and wipe cache and dalvik cache...
fix zip link ======> http://d-h.st/P6S
PLEASE HIT THE LIKE FOR APPRECIATE MY WORK AND MOTIVATION FOR NEWER STUFFS FOR OUR DEVICE

DGEEEK said:
_______________________________________ DGEEEK _________________________________
------------------------------------------------------------Read The whole Post -----------------------------------------------------
Hi fnds here im present u the custom for micromax canvas 3d and my phone 3d (china) ....
Im not a developer of this custom rom i just port it to our device ...
This take me very long time to port this rom to our device :eek :....
so frnds i use extract system.img of micromax 3d and use as base rom.....:
and i use developer's sagarwep LegoIce™Galaxy S4v2 here is link to his rom http://forum.xda-developers.com/showthread.php?t=2458879
and gave a thanks to him....:good:
features:-
rom is touchwiz customized.
very smooth
samsung dialer
and much more
I am not responsible if you brick your device while flashing,so flash at your risk
Flashing instructions
you must be rooted and flashed custom recovery
Before doing anything take a cwm or twrp backup of your system
Now-
Go To Recovery Mode :
Switch off the Phone Press and hold "Volume Up & Down+ Power" Buttons
Select Recovery Mode by Volume Up
CWM:
1. - wipe data factory reset --> Yes--delete all user data
2. - wipe cache partition --> Yes--Wipe Cache
3. - advanced --> Wipe Dalvik Cache --> Yes--wipe dalvik cache
4, - Mounts and Storage--> format system --> Yes -- format system only
4. - install zip from sd --> - choose zip from sdcard --> - Suvi Rom for Canvas Lite.zip
5. - reboot System now
first boot take some time. so dont panic.
ALL 3D APPS LIKE 3D SPACE IS GONE AFTER FLASHING THE CUSTOM ROM
thanks to:-
(1) My family (without the permission i can't touch my pc )
(2) sagarwep (his legoice rom)
(3) xdadevelopers.com
And guy if u like my work please:angel:
Recharge my mobile number with any amount u want my number service provider is AIRCEL (Delhi India)
MY NUMBER IS
:angel: ( +917503332802 ) :angel:
PLEASE PLEASE PLEASE donate
Please donate to above mobile number to help me out from payment of my internet connection :crying :...
here is the link:- http://d-h.st/NEG
Click to expand...
Click to collapse
that was fast 2 post an already asking fore donations not a good way to start a thread

Plz fix error in this rom
no apps are installing from niether play store nor manually. unknown source is ticked off. plzz fix it ... plzz

sd9126 said:
no apps are installing from niether play store nor manually. unknown source is ticked off. plzz fix it ... plzz
Click to expand...
Click to collapse
ok im working on it...i need some time to fix it because i have to attend the exams..

Bugs results
Hi, I really like your work but I am having a bug issue with the ROM. That's why I switched back to my stock ROM. I hope you can fix these bugs.
1. App not installed issue when installing apk files
2. Messaging - Can't receive messages but I don't know if it can send
3. Sim toolkit - Not functioning
I hope you can fix this. And goodluck with your exams.

Hi how to install it wont work for me
What is touchwiz

Sim Toolkit Not Functioning
Hello I tested your ROM and I loved it but there's some minor problem left.
1. Sim Toolkit is force closing everytime I opened the STK
2. Bluetooth issue - I can't find other devices. What I did to fix this is to send any apps from using other phone from my phone and after sending apps to my phone it automatically display in the bluetooth.
That's all I hope you can fix this. Thanks.

Bugs
its seems that the messaging and installing and updating app is not working for me and also there are some minute bugs. please fix it.......
and please make the status bar transparent and system menu like original s4.
Thanks

please port micromax 3d to kitkat
kitkat port 4.4.2 to micromax canvas 3d help
Let go to kitkat 4.4.2 system ui

buju123 said:
its seems that the messaging and installing and updating app is not working for me and also there are some minute bugs. please fix it.......
and please make the status bar transparent and system menu like original s4.
Thanks
Click to expand...
Click to collapse
you need to root your phone and download xposed installer and install the farework and download gravity box app then enable it on module in xposed app (just google it u find the information how to do.):laugh::laugh::good: :good: please hit like if i help you

legoice
Hi deven
I have some problems with this rom like
Less ram free as compared to stock rom
Screens option in settings not working
Some apps like chaton is available in this rom in play store which used to be in stock rom
The resolution of shut animation is not good as it is set to 720*1280 instead of 480*800
Much lags while browsing net
The web pages become unresponsive
Google voice recognization is not working in google now
Gaming experience is very poor
Now very much good benchmarks
No multiwindow support
Some times when i press lock key to unlock it comes blurred rgb screen(as we can se when no network in tv)
I think u would understand my problems and do some thing fruitful
Plz....... Try to port legoice s4 fusion rom from canvas a92 canvas lite a very good rom
Thnx in advance..........deven

DGEEEK said:
you need to root your phone and download xposed installer and install the farework and download gravity box app then enable it on module in xposed app (just google it u find the information how to do.):laugh::laugh::good: :good: please hit like if i help you
Click to expand...
Click to collapse
Please make a complete working rom without any problems or you can make cyanogenmod for this phone, Micromax canvas 3d.
Thanks
---------- Post added at 07:48 AM ---------- Previous post was at 07:40 AM ----------
DGEEEK said:
you need to root your phone and download xposed installer and install the farework and download gravity box app then enable it on module in xposed app (just google it u find the information how to do.):laugh::laugh::good: :good: please hit like if i help you
Click to expand...
Click to collapse
Please make a complete working rom without any problems or you can make cyanogenmod for this phone, Micromax canvas 3d.
Thanks

Messaging Support
Hello sir, can you port the messaging apk of samsung galaxy s4 to this ROM?

Bugs
I found transition bugs in the home page..
Plss try to fix it.
Can u pls create z1 ROM for canvas 3D..

cool...thx for Rom.....:good:

Increase rom
DGEEEK said:
you need to root your phone and download xposed installer and install the farework and download gravity box app then enable it on module in xposed app (just google it u find the information how to do.):laugh::laugh::good: :good: please hit like if i help you
Click to expand...
Click to collapse
thanx bro & please creat a new rom for increase ram in micromax canvas a115 3d please......:

1 bug left
otg cable not working please fix this issue:crying:

could you plz guide me how to port that phone.

awesome working flawless
DGEEEK said:
_______________________________________ DGEEEK _________________________________
------------------------------------------------------------Read The whole Post -----------------------------------------------------
_____________________ 4.2.2 ROM FOR CANVAS 3D ___________________
Hi fnds here im present u the custom for micromax canvas 3d and my phone 3d (china) ....
Im not a developer of this custom rom i just port it to our device ...
This take me very long time to port this rom to our device :eek :....
so frnds i use extract system.img of micromax 3d and use as base rom.....:
and i use developer's sagarwep LegoIce™Galaxy S4v2 here is link to his rom http://forum.xda-developers.com/showthread.php?t=2458879
and gave a thanks to him....:good:
features:-
rom is touchwiz customized.
very smooth
samsung dialer
and much more
I am not responsible if you brick your device while flashing,so flash at your risk
Flashing instructions
you must be rooted and flashed custom recovery
Before doing anything take a cwm or twrp backup of your system
Now-
Go To Recovery Mode :
Switch off the Phone Press and hold "Volume Up & Down+ Power" Buttons
Select Recovery Mode by Volume Up
CWM:
1. - wipe data factory reset --> Yes--delete all user data
2. - wipe cache partition --> Yes--Wipe Cache
3. - advanced --> Wipe Dalvik Cache --> Yes--wipe dalvik cache
4, - Mounts and Storage--> format system --> Yes -- format system only
4. - install zip from sd --> - choose zip from sdcard --> - Suvi Rom for Canvas Lite.zip
5. - reboot System now
first boot take some time. so dont panic.
ALL 3D APPS LIKE 3D SPACE IS GONE AFTER FLASHING THE CUSTOM ROM
thanks to:-
(1) My family (without the permission i can't touch my pc )
(2) sagarwep (his legoice rom)
(3) xdadevelopers.com
And guy if u like my work please:angel:
Recharge my mobile number with any amount u want my number service provider is AIRCEL (Delhi India)
MY NUMBER IS
:angel: ( +917503332802 ) :angel:
PLEASE PLEASE PLEASE donate
Please donate to above mobile number to help me out from payment of my internet connection:...
here is the link:- http://d-h.st/NEG
POST 2 ====> NO APP INSTALLED AND MESSAGING FIX PATCH
hey guys i made full bugsfree fix for this rom...:laugh::laugh::laugh::laugh::laugh::laugh:
step 1 : flash the above custom rom properly [see installation instruction above ]
step 2: flash the 4_2_2_fix.zip in cwm and wipe cache and dalvik cache...
fix zip link ======> http://d-h.st/P6S
PLEASE HIT THE LIKE FOR APPRECIATE MY WORK AND MOTIVATION FOR NEWER STUFFS FOR OUR DEVICE
Click to expand...
Click to collapse
Thank you so much buddy , really many many thanks, i was frustrated with my Canvas 3D, now i love my canvas new look and performance.

Thanks !
This was first ROM which got booted properly on my device

HNY15 ROM series -03/01/15 ANSP V3 ROM

HAPPY NEW YEAR 2015 TO ALL XOLO USERS
THIS IS THE THIRD ROM IN HNY15 ROM SERIES​
ANSP v3 ROM (03-01-2015)
Double tap unlock screen (beta)
Screen recording fixed
Statusbar shadows fixed
Added Android 5.0 style swipe for stock toogles
Changable clock for statusbar
Gbox edition RAM bar & old aosp RAM bar
Dpi changer
Multi user advanced settings
Nav bar enabler
Smart corner for statusbar
(Double tap lock etc)
Notification flashligt
Lock screen mods
HOW TO INSTALL
Use custom KK recovery from here.
I prefer [CWM Advanced Edition] PhilZ Touch 6.57.9 - cwm 6.0.5.1.
(Internal sd-card refereed as sdcard00, external as sdcard01)
Download rom zip file.
Put into sd card.
Flash the desired recovery.
Boot into recovery.
BACKUP CURRENT ROM
Wipe for flash of new rom.
Or wipe data/system/delvic cache/cache.
Select Install From SD (Internal or External)
Select the zip file and Select YES
Reboot.
THINGS TOBE NOTED
First boot takes time 3-5 mins so be patient.
wait until it boots.
DOWNLOAD LINK​
Credits:- @yavuz21
original thread - for more info and screenshots.

review..
flashed this rom...but volume output from apolo music is not clear dont wether its rom or my phone fault..battery comsuption in 3g mode is high..nees to check more..and last its seem rom is ported from 5" scren phone ...
rest all is ok..great work.
---------- Post added at 02:31 PM ---------- Previous post was at 02:25 PM ----------
flashed this rom...but volume output from apolo music is not clear dont wether its rom or my phone fault..battery comsuption in 3g mode is high..nees to check more..and last its seem rom is ported from 5" scren phone ...
rest all is ok..great work.

mujaid714 said:
flashed this rom...but volume output from apolo music is not clear dont wether its rom or my phone fault..battery comsuption in 3g mode is high..nees to check more..and last its seem rom is ported from 5" scren phone ...
rest all is ok..great work.
Click to expand...
Click to collapse
Yes rom is a port from 5" phone.
There is no volume issue with the rom.
Battery consumption for 3g will be more just post a screenshot of setting-battery

please, provide update over the earlier version of ANSP rom

first of all..congrats to original dev and avi..great rom, so far the best one..many options, seems like cm11 on our phone..until now, no FC, smooth, battery life is good, im tweaking the rom a bit and will release for BQ 5.7 users..network signal and wifi tweaked cause it seemed a little bit weak..im testing since yesterday and it seems nice and fast.

VIDEO REVIEW IN HD:

how to use multi user option & or enable it?
@avi sir, how to use multi user function in ANSP V3. When I tried to setup user, its rebooting before setting process. Also I am getting exchange service FC notification.

Custom ROM Links for Micro Max Canvas a111

Rom Name‬​RJ_A111_DDX_KKT_V3​
A very Impressive ROM to all of Micromax Canvas A111.
It's a STOCK Deodexed ROM.
Themed Like Kitkat 4.4
Base ROM for all My ROMS
ROM Features::
Pure Deodexed
[*]KIT-KAT 4.4 Launcher
[*]Pre-Rooted
[*]Zip align apps in "/system" and apps in "/data" every reboot which result in less RAM usage.
[*]Build.prop tweaks and improvements.
[*]Games are Running smoothly with less lag and is very playable !
[*]KITKAT 4.4 THEMED
[*]Lightweight Music player with @Viper4android fx v2.3.1.5 auto driver no need busy box now to run it
[*]Media(Sounds & Boot and Shut Down) Changed
[*]Fonts Changed
[*]Good Battery Backup
[*]Highly Themed Like KITKAT
[*]NOTE:: Impotent thing enable Stand-alone mode in messages
for this go Messages>>settings>>choose Stand-alone mode.
[*]if u still facing Problem with Messaging Just Go Patch here http://www.mediafire.com/download/6cslh9vhpcmklks/Mesaging_Patch.zip
BUGS::
Panorama & Video Mode not working in KK 4.4 Camera that's why added stock camera with 4.4 camera
NOTE‬::
I informing again Flash on your own responsibility. This ROM is working and tested on my phone​Download Links
Dev Host-- RJ_A111_DDX_KKT_V3
MediaFire-- RJ_A111_DDX_KKT_V3
Dropbox-- NOT AVAILABLE​
------------------------------------------
PROCEDURE TO FLASH ROM ::
------------------------------------------
Install Through TWRP or CWM Recovery
[*]Wipe & delvik cache
[*]Factory Reset
[*]Install Zip from SD Card
[*]Wipe & delvik cache
[*]Finally Reboot
After Boot Logo wait for 5 min to Boot-up.
My Another ROMs & Guides Works
1. RJ_MS5_Flare_Droid_V4 -- http://forum.xda-developers.com/canvas-doodle-2/general/rom-rjms5flaredroidv4wififix-t2983800‬
2. [GUIDE]Newbie Guide for How to Root/Flash Recovery/UNBRICK on Canvas A111-- http://forum.xda-developers.com/canvas-doodle-2/general/rom-rjms5flaredroidv4wififix-t2983800‬

I have flashed this rom and used it. Well the rom is smooth as hell and ram optimsation is toooo good. But I found the notification panel look awkward and I guess the font reminds me of samsung devices ... Well the holo theme background was :sly: ... Well I changed it with xblast ... But great rom :thumbup:
Sent from my [email protected] MIXperia

[Xolo Q3000] [4.4.2] [KK] MysticOS_v6

TRIBUTE TO "THE SYMBOL OF KNOWLEDGE : DR. B. R. AMBEDKAR"​Here is my 9th ported Rom, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) @itsraj011 (Developer of the Rom).
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MysticOS_v6_by Sachin.zip in sd card.
2) Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4) Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5) Install MysticOS_v6_by Sachin.zip
6) Wipe Cache & Dalvik Cache.
7) Reboot System.
8) 1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo).
WARNING:​I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Custom Boot Logo (by Me)
2)Superb system animations & transitions.
3) Lag less performance.
4) Everything from original Rom is working fine.
5) Official changelog at: http://forum.xda-developers.com/android/development/rom-t3184945
Bugs:
If you find any problem with camera, use a better camera or google camera app from play store.
Bugless...... Report, if you found any.
Download Links:
1) MysticOS_v6 Full ROM
ALL THE BEST GUYS....

SCREENSHOTS:
https://drive.google.com/open?id=0B9c3NsdJ2PscYi1EQ0ZaNGRuX0U

THEMES:[/U]
1) TOUCHWIZ THEME
2) Dark Mystic_v6 Theme

BUG FIXES

sachin.r.fulzele said:
TRIBUTE TO "THE SYMBOL OF KNOWLEDGE : DR. B. R. AMBEDKAR"​Here is my 9th ported Rom, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) @itsraj011 (Developer of the Rom).
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MysticOS_v6_by Sachin.zip in sd card.
2) Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4) Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5) Install MysticOS_v6_by Sachin.zip
6) Wipe Cache & Dalvik Cache.
7) Reboot System.
8) 1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo).
WARNING:​I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Custom Boot Logo (by Me)
2)Superb system animations & transitions.
3) Lag less performance.
4) Everything from original Rom is working fine.
5) Official changelog at: http://forum.xda-developers.com/android/development/rom-t3184945
Bugs:
If you find any problem with camera, use a better camera or google camera app from play store.
Bugless...... Report, if you found any.
Download Links:
1) MysticOS_v6 Full ROM : Link to be updated
ALL THE BEST GUYS....
Click to expand...
Click to collapse
Waiting......

Smooth as butter...nice animations. Everything works as expected.. Only Dolby atmos gives an fc.. And sound is very low.. I get loud sound in stock..so no problem in my speaker ... Thanks..

drsarkar said:
Smooth as butter...nice animations. Everything works as expected.. Only Dolby atmos gives an fc.. And sound is very low.. I get loud sound in stock..so no problem in my speaker ... Thanks..
Click to expand...
Click to collapse
Try increasing volume from engg. Mode. I'll provide fix for dolby. Thanks a lot

sachin.r.fulzele said:
Try increasing volume from engg. Mode. I'll provide fix for dolby. Thanks a lot
Click to expand...
Click to collapse
I tried a lot to increase the sound volume in every possible ways ...but failed. So please help by providing any patch.. Thanks.

Bro after mysticos v6 my phone ui behaving as tablet ui ( resolution,keybord etc)
https://drive.google.com/folderview?id=0B1xm_yNK0pydMG9xNy03M0tiaGs&usp=sharing

Dolby Zip
sachin.r.fulzele said:
Try increasing volume from engg. Mode. I'll provide fix for dolby. Thanks a lot
Click to expand...
Click to collapse
Dear Sachin I found a flashable dolby zip which works in this rom. Please review.. There is an uninstaller flashable zip also... Thanks..

iaditya91 said:
Bro after mysticos v6 my phone ui behaving as tablet ui ( resolution,keybord etc)
https://drive.google.com/folderview?id=0B1xm_yNK0pydMG9xNy03M0tiaGs&usp=sharing
Click to expand...
Click to collapse
Please follow the steps as given............. go to settings.. Mystic Fibres..Mystic settings...System..LCD Density.. change to preset value..480... reboot...done.

drsarkar said:
Please follow the steps as given............. go to settings.. Mystic Fibres..Mystic settings...System..LCD Density.. change to preset value..480... reboot...done.
Click to expand...
Click to collapse
bro it recovered upto some extent but screen size is to small.......
https://drive.google.com/folderview?id=0B1xm_yNK0pydNmVGOXBUb3h1ek0&usp=sharing

iaditya91 said:
bro it recovered upto some extent but screen size is to small.......
https://drive.google.com/folderview?id=0B1xm_yNK0pydNmVGOXBUb3h1ek0&usp=sharing
Click to expand...
Click to collapse
You can change the theme by flashing those given by sachin and see if it improves ...

drsarkar said:
You can change the theme by flashing those given by sachin and see if it improves ...
Click to expand...
Click to collapse
ya i tried mysticos dark theme but no change in size. It only changed icons and dark theme.......
you had no such problem?

iaditya91 said:
Bro after mysticos v6 my phone ui behaving as tablet ui ( resolution,keybord etc)
https://drive.google.com/folderview?id=0B1xm_yNK0pydMG9xNy03M0tiaGs&usp=sharing
Click to expand...
Click to collapse
Change lcd density to 400+ and restart.

iaditya91 said:
ya i tried mysticos dark theme but no change in size. It only changed icons and dark theme.......
you had no such problem?
Click to expand...
Click to collapse
Yes, it's only dark ui. Have you switched to one handed mode?

sachin.r.fulzele said:
Yes, it's only dark ui. Have you switched to one handed mode?
Click to expand...
Click to collapse
No rom directly installed with tablet ui........installed four times but no success.......
So came back to mysticos v4........

iaditya91 said:
No rom directly installed with tablet ui........installed four times but no success.......
So came back to mysticos v4........
Click to expand...
Click to collapse
After setting lcd density, everything is working fine. Have you left any rom data from previous rom??

sachin.r.fulzele said:
After setting lcd density, everything is working fine. Have you left any rom data from previous rom??
Click to expand...
Click to collapse
No, deleted all android data and wiped all data,caches and andriod secure as per your procedure.

I had the same problem...change the LCD density & reboot.....Guess the problem is with Nova launcher...So switch to Now launcher

[ROM][6.0.1][STABLE] Marshmallow Based Resurrection Remix For A6000/A6000+

[size=+4]••• Credits ••• [/size]​
Stuep dec ,Pinggit Wahyu Nugroho , Budiyono
Thanks to @mshoaib7 for fixing proximity sensor issue.
Presenting you the stable marshmallow based Resurrection Remix V5.6.0 .
This is a stable marshmallow for our Lenovo A6000/A6000+ .
Don't ask me that is this working or that working . I am Just Gonna say "EVERYTHING IS WORKING" . I have personally flashed it on my phone.
[size=+2]HighLights ••• [/size]​
• 64 Bit
• Pre Rooted
• Xposed Working (Not PreInstalled)
• No Bugs (I didn't noticed any bug )
• Gapps are working (I flashed Pico version .No signin problem)
Bugs :•• Proximity Sensor Not working .Screen dont turn off while calling .(fixed)
Fb & Messenger Force Closing ( Use Facebook Lite - The best Alternative)
Screenshots •See attachments
[size=+2]How To Flash ••• [/size]​
••IT IS RECOMMENDED TO MAKE A BACKUP OF CURRENT ROM , I AM NOT RESPONSIBLE IF SOMETHING WEIRED HAPPENS TO YOUR LOVING SMARTPHONE DUE TO YOUR NOOBNESS AND LAZYNESS. ••
1. Download The ROM from Below.
2.Reboot To Recovery (Recommended TWRP by Jav, you can try with other)
3.Wipe dalvik,cache,data,system.
4. Now locate the ROM zip file and slide bottom bar to flash.
5. Flash Gapps (if you want - Arm64 • 6.0 • Nano/Pico/Micro/Bla Bla Bla...)
6.flash rr560_proximity_fix.zip .
5. Reboot . Done .Enjoy
[size=+2]Download ••• [/size]​ From Here
rr560_proximity_fix.zip From Here
Other Info ••
ROM OS Version: 6.0.1r3 Marshmallow
ROM Kernel: Linux 3.4.49
Based On:CyanogenMod 13.0
Resurrection Remix•• Source Code
Kernel source:https://github.com/lenovo-Kraft-T/android_kernel_lenovo_msm8916/tree/cm-13.0
Device Tree: https://github.com/lenovo-Kraft-T/android_device_lenovo_msm8916
Thanks to FlourMo for kernel Sources.

Thanks for sharing......................
-Sourav_8434

Great work and thanks for sharing

not booting properly after apps optimization phones goes soft reboot and the same apps optimization process will goes again....and again...and again

i have installed this rom but unable to update binary for supersu when i want to update via recovery it always restart in stock recovery so help me to update binary
---------- Post added at 01:21 PM ---------- Previous post was at 12:41 PM ----------
facebook and messenger always crash
flash in app drawer not working but camara flash working and it showing green colour circular stip in right side of screen

Apoorv_def19 said:
not booting properly after apps optimization phones goes soft reboot and the same apps optimization process will goes again....and again...and again
Click to expand...
Click to collapse
some workaround
1. Flash over stock lollipop.
2. Use TWRP by JAV Team
3. Follow steps clearly as mentioned in thread .
4. Try to boot without Gapps .( I used Pico ,it may not boot sometime when we flash mini & full Gapps)

krishna526 said:
i have installed this rom but unable to update binary for supersu when i want to update via recovery it always restart in stock recovery so help me to update binary
---------- Post added at 01:21 PM ---------- Previous post was at 12:41 PM ----------
facebook and messenger always crash
flash in app drawer not working but camara flash working and it showing green colour circular stip in right side of screen
Click to expand...
Click to collapse
Why you updating binary . SuperSU is already flashed while flashing ROM . You didn't need to update SuperSU binary . ...
If you want to update SuperSU than grab latest recovery flashable SuperSU from somehere and flash it by booting into recovery . that's it.
I don't know about flash issue . But that green color is showing because you enabled some feature in it like gesture or something . You can search on Google to fix fb and messenger issues.

Can I, like, flash this over CM 12.1 by ED300?

coolakshansh said:
Can I, like, flash this over CM 12.1 by ED300?
Click to expand...
Click to collapse
Try it . .. . it may work... But if it didn't then first flash stock ROM then This ROM . use TWRP by JaV

shivdroid said:
some workaround
1. Flash over stock lollipop.
2. Use TWRP by JAV Team
3. Follow steps clearly as mentioned in thread .
4. Try to boot without Gapps .( I used Pico ,it may not boot sometime when we flash mini & full Gapps)
Click to expand...
Click to collapse
Bro i did without gapps and its boot properly but when i used pico or micro...then its not

Apoorv_def19 said:
Bro i did without gapps and its boot properly but when i used pico or micro...then its not
Click to expand...
Click to collapse
I used Pico gapps and It booted properly without any problem.
Don't flash higher Gapps .I can't help you much in this case . This ROM is ported from other device.
Here is screenshot Of
1. ROM zip and Nano gapps Zip
2. Google Account setup after booting into Resurrection Remix.

after GAapps flash it show unfortunately setup wijirt has stop
I also flash pico,nano micro

Apoorv_def19 said:
Bro i did without gapps and its boot properly but when i used pico or micro...then its not
Click to expand...
Click to collapse
You have flash gapps right after flashing the rom....flash the rom then gapps, reboot only after that...that is cm13 bug, older build still have those bugs...its not the rom...

Hi. Thanx for the ROM. Is there any chance of further development of this ROM or is it just single port and then it's over?

i have flashed the rom and almost every things work fine except flash light
and after flashing the rom battery draning issue after 100% just browsing for 15-20 min battery level go to about 70% and in stand by mode also battey drain so fast if i charge to 100% and left it unused and wi fi is on in night time then in morning after abut 8h battery level go to below 20% so any one can suggest me how to control it. As i think marsmallow provide great battery backup but in my case it just goes opposite
so help me if any one
Proximity sensor not working properly during call screen do not turn off and also some time during call screen do not wake up after several time pressing the power key
I like to listen radio but in this ROM no FM radio

krishna526 said:
i have flashed the rom and almost every things work fine except flash light
and after flashing the rom battery draning issue after 100% just browsing for 15-20 min battery level go to about 70% and in stand by mode also battey drain so fast if i charge to 100% and left it unused and wi fi is on in night time then in morning after abut 8h battery level go to below 20% so any one can suggest me how to control it. As i think marsmallow provide great battery backup but in my case it just goes opposite
so help me if any one
Proximity sensor not working properly during call screen do not turn off and also some time during call screen do not wake up after several time pressing the power key
I like to listen radio but in this ROM no FM radio
Click to expand...
Click to collapse
USE ANOTHER ROM IF U THINK ITS CAUSING TOO MUCH TROUBLE..... I am not using this rom because I can't login to my Google account due to account security issues . (Google think my device is stolen and someone is trying to login from same device with another account). Otherwise it was working fine . This ROM is ported from Other device due to which it maybe causing little problem.... If I using this rom , I can live with that.

You've ported this rom include [port] in the title.

It is a very good,smooth rom for a6000
Here's a small clip:
https://youtu.be/bpyzbm0eNTk
All headphones,features work well
Sent from my Lenovo A6000s using XDA-Developers mobile app

kanwaljeetsm said:
It is a very good,smooth rom for a6000
Here's a small clip:
https://youtu.be/bpyzbm0eNTk
All headphones,features work well
Sent from my Lenovo A6000s using XDA-Developers mobile app
Click to expand...
Click to collapse
Are you been able to sign in to google apps completely?
I was facing problem where I cannot sync my contacts.
*Edit* : PROBLEM SOLVED

kanwaljeetsm said:
It is a very good,smooth rom for a6000
Here's a small clip:
https://youtu.be/bpyzbm0eNTk
All headphones,features work well
Sent from my Lenovo A6000s using XDA-Developers mobile app
Click to expand...
Click to collapse
yes rom is working fine i am using a6000 plus proximity sensor not working during call and all the cpu core working at same time so any custom kernal then this problem may be solved and this rom is battery hunger. it comsume too much battery and no option for fm radio
---------- Post added at 01:28 PM ---------- Previous post was at 01:18 PM ----------
shivdroid said:
[size=+4]••• Credits ••• [/size]​
Stuep dec ,Pinggit Wahyu Nugroho , Budiyono
Presenting you the stable marshmallow based Resurrection Remix V5.6.0 .
This is a stable marshmallow for our Lenovo A6000/A6000+ .
Don't ask me that is this working or that working . I am Just Gonna say "EVERYTHING IS WORKING" . I have personally flashed it on my phone.
[size=+2]HighLights ••• [/size]​
• 64 Bit
• Pre Rooted
• Xposed Working (Not PreInstalled)
• No Bugs (I didn't noticed any bug )
• Gapps are working (I flashed Pico version .No signin problem)
Screenshots •See attachments
[size=+2]How To Flash ••• [/size]​
••IT IS RECOMMENDED TO MAKE A BACKUP OF CURRENT ROM , I AM NOT RESPONSIBLE IF SOMETHING WEIRED HAPPENS TO YOUR LOVING SMARTPHONE DUE TO YOUR NOOBNESS AND LAZYNESS. ••
1. Download The ROM from Below.
2.Reboot To Recovery (Recommended TWRP by Jav, you can try with other)
3.Wipe dalvik,cache,data,system.
4. Now locate the ROM zip file and slide bottom bar to flash.
6. Flash Gapps (if you want - Arm64 • 6.0 • Nano/Pico/Micro/Bla Bla Bla...)
5. Reboot . Done .Enjoy
[size=+2]Download ••• [/size]​ From Here
Other Info ••
ROM OS Version: 6.0.1r3 Marshmallow
ROM Kernel: Linux 3.4.49
Based On:CyanogenMod 13.0
Resurrection Remix•• Source Code
Kernel source:https://github.com/lenovo-Kraft-T/android_kernel_lenovo_msm8916/tree/cm-13.0
Device Tree: https://github.com/lenovo-Kraft-T/android_device_lenovo_msm8916
Thanks to FlourMo for kernel Sources.
Click to expand...
Click to collapse
from where u find the source of this rom