I have a Moto G 1st Gen Dual Sim (XT1032). I tried to convert it to XT1032 GPE but I think I failed. After that I flashed the following ROM
http://forum.xda-developers.com/moto-g/development/rom-android-source-project-t3060704
But in this ROM I am unable to send or receive any SMS. I installed CM12.1, but the problem persists. I have also tried to flash Lollipop Stock ROM for Moto G but It fails every-time. I am currently on the AOSP based ROM. Any solutions for this?
nomad47 said:
I have a Moto G 1st Gen Dual Sim (XT1032). I tried to convert it to XT1032 GPE but I think I failed. After that I flashed the following ROM
http://forum.xda-developers.com/moto-g/development/rom-android-source-project-t3060704
But in this ROM I am unable to send or receive any SMS. I installed CM12.1, but the problem persists. I have also tried to flash Lollipop Stock ROM for Moto G but It fails every-time. I am currently on the AOSP based ROM. Any solutions for this?
Click to expand...
Click to collapse
Bumping it up
Have you tried using the version Stock / Standard device?
And update the system ? Firmware Unchanged / Stock?
Cleared by the standard data recovery ?
Check SIM Card , Signal and connectors,
can sometimes be setup your service provider.
killerBRs said:
Have you tried using the version Stock / Standard device?
And update the system ? Firmware Unchanged / Stock?
Cleared by the standard data recovery ?
Check SIM Card , Signal and connectors,
can sometimes be setup your service provider.
Click to expand...
Click to collapse
I tried installing stock Lollipop ROM but it failed.
The problem is definitely with the phone. As none of my sim cards can send message from this phone.
Sent from my Moto G using Tapatalk
nomad47 said:
Bumping it up
Click to expand...
Click to collapse
Wirya88 told that this might help in another thread.
"Go to this thread http://forum.xda-developers.com/show...php?p=58209973 and flash the forcess.zip"
skyluker said:
Wirya88 told that this might help in another thread.
"Go to this thread http://forum.xda-developers.com/show...php?p=58209973 and flash the forcess.zip"
Click to expand...
Click to collapse
Thank you
Updated:
Holy mother of God!! That worked man. Thank you thank you so much
Sent from my Moto G using Tapatalk
Link off. Can you sendo that file again? Im having problme with SMS
Related
My moto g xt1033 always show for emergency call only after installed ROM.. It will be great help if sum1 can give me an stock ROM wif working dualsim n flashable via clockworkmod...plzz I miss ton of important call n SMS coz of this...
mrclumcys said:
My moto g xt1033 always show for emergency call only after installed ROM.. It will be great help if sum1 can give me an stock ROM wif working dualsim n flashable via clockworkmod...plzz I miss ton of important call n SMS coz of this...
Click to expand...
Click to collapse
Read this: http://forum.xda-developers.com/showthread.php?t=2542219
mrclumcys said:
My moto g xt1033 always show for emergency call only after installed ROM.. It will be great help if sum1 can give me an stock ROM wif working dualsim n flashable via clockworkmod...plzz I miss ton of important call n SMS coz of this...
Click to expand...
Click to collapse
There is still no support for XT1033 or our dual SIM Moto g. Do the revert back to the stock 4.3 and upgrade to 4.4.2 via stock recovery. This is for the Asian XT1033
http://forum.xda-developers.com/showthread.php?t=2639384
IM no newb. But i cant find a rom that works or any info on how to trouble shoot my prob.
I have the Moto G GPE bought from the play store.
Its Rooted using Philz Touch CWM recovery.
Getting encryption error every time I install roms.
what am i doing wrong?
PLease help
i think most roms are aimed at the 'stock' moto g.
what i did was convert it to the standard version then stuck on a recovery/rom etc.
use this thread if you want to go down the same route:
http://forum.xda-developers.com/showthread.php?t=2542219
it's really easy to do (just a few fastboot commands) and will take you about 10-20 mins.
good luck
twist3d0n3 said:
i think most roms are aimed at the 'stock' moto g.
what i did was convert it to the standard version then stuck on a recovery/rom etc.
use this thread if you want to go down the same route:
http://forum.xda-developers.com/showthread.php?t=2542219
it's really easy to do (just a few fastboot commands) and will take you about 10-20 mins.
good luck
Click to expand...
Click to collapse
So I'm turning my GPE into a stock Moto G like the one if I bought from Motorola ? Thanks for the help
yup.
twist3d0n3 said:
yup.
Click to expand...
Click to collapse
Is this the firmware you used?
Blur_Version.14.14.16.falcon_umts.Retail.en.US
ardaz87 said:
Is this the firmware you used?
Blur_Version.14.14.16.falcon_umts.Retail.en.US
Click to expand...
Click to collapse
Can anyone confirm that that is the firm ware to use to get to sick moto g from gpe
ardaz87 said:
Can anyone confirm that that is the firm ware to use to get to sick moto g from gpe
Click to expand...
Click to collapse
Yes, i used this firmware yesterday, for the same problem... after use the moto tool utility to root. Works fine!
Enviado de meu Moto G usando Tapatalk
ardaz87 said:
Is this the firmware you used?
Blur_Version.14.14.16.falcon_umts.Retail.en.US
Click to expand...
Click to collapse
i'm in England so used the en.GB version, but yes, that'll put you on the 'retail' version, which afaik doesn't have network branding etc.
leowaltrick said:
Yes, i used this firmware yesterday, for the same problem... after use the moto tool utility to root. Works fine!
Enviado de meu Moto G usando Tapatalk
Click to expand...
Click to collapse
So I've tried for the past week to see what I was doing wrong. But every time I try to flash the file spasarechunk files I get Image to big.... Advice? T
Thanks for the help
Try mfastboot. Check GPE thread in development for alternative fastboot.exe
ardaz87 said:
IM no newb. But i cant find a rom that works or any info on how to trouble shoot my prob.
I have the Moto G GPE bought from the play store.
Its Rooted using Philz Touch CWM recovery.
Getting encryption error every time I install roms.
what am i doing wrong?
PLease help
Click to expand...
Click to collapse
Cyanogenmod from @dhacker29 works with gpe now. http://forum.xda-developers.com/showthread.php?t=2608377
Q&A for Stock firmware images
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Please note that the latest 4.4.4 firmware images are no longer being uploaded to sbf.droid-developers.org.
It's better to check here: http://www.filefactory.com/folder/c6cdedc45a775d27 and read through the thread in OP for announcements about new firmware availability.
Be very careful with Fastboot commands and never 'fastboot erase all' or format random partitions.
XT1032 4.4.4 Retail US
is the full firmware 4.4.4 image of the "XT1032 4.4.4 Retail US" available?
cubk said:
is the full firmware 4.4.4 image of the "XT1032 4.4.4 Retail US" available?
Click to expand...
Click to collapse
Not yet. Hopefully soon.
delited
---------- Post added at 08:41 AM ---------- Previous post was at 08:36 AM ----------
I need 173.44.9. falcon_umts.AIO.en.US.
who can help please?
venul said:
I need 173.44.9. falcon_umts.AIO.en.US.
who can help please?
Click to expand...
Click to collapse
http://www.filefactory.com/file/1inpvzndmgop/AIO_XT1032_4.4.2-KXB20.9-1.10-1.9_CFC_1FF.xml.zip
Is the site going to come back up anytime soon?
primey said:
Is the site going to come back up anytime soon?
Click to expand...
Click to collapse
Unknown. Read through this thread for links to firmware images.
DO THESE BELONG TO XT1033 INDIAN VERSION-
http://www.filefactory.com/file/4k0..._4.4.4_KXB21.14-L1.40_34_cid7_CFC_1FF.xml.zip
www.rbu.xyz/stock-official-motorola...-dual-sim-4-4-4-lock-bootloader-t9481470.html (baseband version is written to be something different than what's desirable, rest all things are same)
??
Hey,
I am pretty new to all of this. I have bought a Moto G on Amazon Germany, it's a XT1032. I installed Cyanogen and it keeps freezing and I have to restart the phone once a day because it slows down.
The question: Can I use a GPE version? Any reason not to? I would use this one:
XT1032_GPE_444_Optimized_v1.1.zip
Cheers
RaeonSlaze said:
Hey,
I am pretty new to all of this. I have bought a Moto G on Amazon Germany, it's a XT1032. I installed Cyanogen and it keeps freezing and I have to restart the phone once a day because it slows down.
The question: Can I use a GPE version? Any reason not to? I would use this one:
XT1032_GPE_444_Optimized_v1.1.zip
Cheers
Click to expand...
Click to collapse
You can try GPE, without problems. Just follow a proper guide, the partition table between stock and gpe is different.
therover said:
You can try GPE, without problems. Just follow a proper guide, the partition table between stock and gpe is different.
Click to expand...
Click to collapse
You can use GPE without formatting 'userdata' by read the first post here and flash the GPE zip: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
Basically you need to flash the non-GPE Stock 4.4.4 Kernel immediately after flashing the zip.
xt1034 wind mobile
I am in need of the wind mobile moto g xt1034 stock rom, or atleast the baseband files from it
useless2764 said:
I am in need of the wind mobile moto g xt1034 stock rom, or atleast the baseband files from it
Click to expand...
Click to collapse
XT1034 Basebands / Radios available here: http://forum.xda-developers.com/showthread.php?t=2649763 (Any region should work for you)
coool.....thanks man for this...!!
Lollipop Firmware
do u know when the Lollipop Firmware.tar.gz will come Or as u expected !! ???
http://forum.xda-developers.com/moto-g/general/lollipop-stock-rom-t3018568
Can I flash this ( http://forum.xda-developers.com/showthread.php?p=58534609#post58534609 ) Lollipop firmware on my Moto G LTE (XT1040)?
Radra said:
Can I flash this ( http://forum.xda-developers.com/showthread.php?p=58534609#post58534609 ) Lollipop firmware on my Moto G LTE (XT1040)?
Click to expand...
Click to collapse
No you can't
Sent from my Moto G
Moto G XT1033 issues
Please help me. Today i flashed an AsiaRetail Lollipop 5.0.2 Firmware with fastboot. But i didn't like it so i tried to flash 4.4.4 gpe again, flash a recovery and install a custom kitkat rom but after i flashed the 4.4.4 gpe, the rom just doesn't boot up anymore, it is stuck on the "Bootloader unlocked" screen. I tried to reflash the lollipop firmware over and over again, it just doesn't boot up anymore. Please, help me.
I mention that my Bootloader is the 41.18 version.
[Q&A] [RADIO][KERNEL][CWM] Stock Radio | Kernel Firmware Images (All Variants / Regi
Q&A for [RADIO][KERNEL][CWM] Stock Radio | Kernel Firmware Images (All Variants / Regions)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RADIO][KERNEL][CWM] Stock Radio | Kernel Firmware Images (All Variants / Regions). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I have the xt1032 variant running Moto stock 4.4.4 with stock recovery.
If I flash GPe ROM and GPe stock recovery will I be able to receive lollipop update OTA?
EDIT: nvm. I posted in the wrong thread by mistake
Signal Problem
Boss, i have tried all of the above files related to my ph. but still i am not getting signal after converting my my moto g xt-1033 to gpe...
please help if anyone can help me... its a request... thanks in advance
Hi, can I flash 4.4.4 radio on a 4.4.2 Moto G? Thanks
WiFi and 3G not working on XT1088
I have a Moto G 2014 xt1088,
unfortunatelly I think I ran the command "fastboot erase all" and now I can't use WiFi and get 3G signal. I think if I replace the radio/modem via fastboot could solve it.
Can someone tell me if is possible, and what if I flash the xt1033 radio, it will boot?
Or someone could upload the xt1088 or xt1084 version.
Sorry my english.
Thanks.
smashen said:
Hi, can I flash 4.4.4 radio on a 4.4.2 Moto G? Thanks
Click to expand...
Click to collapse
Yes.
joaoricardo.rm said:
I have a Moto G 2014 xt1088,
unfortunatelly I think I ran the command "fastboot erase all" and now I can't use WiFi and get 3G signal. I think if I replace the radio/modem via fastboot could solve it.
Can someone tell me if is possible, and what if I flash the xt1033 radio, it will boot?
Or someone could upload the xt1088 or xt1084 version.
Click to expand...
Click to collapse
Unfortuantely if you really have used the fastboot command 'erase all' - you have lost your IMEI and there is currently no way to restore it. You have to return the phone to Motorola.
Anyone else reading this: NEVER, EVER use: Fastboot Erase all
Related:
Moto G (2014) forum
Moto G IMEI = 0
Other questions :S
Thanks for the support man,
just confirming, the WiFi depends of the IMEI too, right? even the WiFi I can`t restore?
And one last thing: only Motorola can repair it (or just replace the device), or may a regular repair phone store could do something? what if they replace physicaly the phone memory?
Sorry so many question, it`s my last. :angel:
Thanks again.
lost101 said:
Yes.
Unfortuantely if you really have used the fastboot command 'erase all' - you have lost your IMEI and there is currently no way to restore it. You have to return the phone to Motorola.
Anyone else reading this: NEVER, EVER use: Fastboot Erase all
Related:
Moto G (2014) forum
Moto G IMEI = 0
Click to expand...
Click to collapse
You should be able to get WiFi working. Try flashing full Motorola firmware image or custom ROMs.
Radio to XT1088
Could someone upload the radio to XT1088 Moto G 2 gen 8 GB from Brazil?
Thanks.
joaoricardo.rm said:
Could someone upload the radio to XT1088 Moto G 2 gen 8 GB from Brazil?
Thanks.
Click to expand...
Click to collapse
This forum is for Moto G (2013) only. Please make your request in the Moto G (2014) forum.
lost101 said:
This forum is for Moto G (2013) only. Please make your request in the Moto G (2014) forum.
Click to expand...
Click to collapse
Thank you and sorry.
I flashed Donkey Kang Kernel - V3.5 and did not work, I was caught in the first logo.
Flashed the original 5.0 version of the kernel and all returned to work perfectly but I am without Wifi, installed the modules version 4.4.4 kernel but without success.
Please someone that is running version 5.0 from Brazil can post your kernel modules?
Thank you in advance.
wagnerdd said:
Please someone that is running version 5.0 from Brazil can post your kernel modules?
Click to expand...
Click to collapse
Try these modules from GPE 5.0.1: https://www.androidfilehost.com/?fid=95864024717069088
It did not work friend, I am preparing a backup to an installation from scratch since last night trying to fix the Wifi problem just flashing the wrong (I think) radio and that was with only one sim card.
so if i flash 1031_Boost_US_CDMA_Kernel_3.4.42-gb89c9dd.zip on my boost moto g with cm12 rom it will get my phone signal working?
godlike777 said:
so if i flash 1031_Boost_US_CDMA_Kernel_3.4.42-gb89c9dd.zip on my boost moto g with cm12 rom it will get my phone signal working?
Click to expand...
Click to collapse
Possibly. It depends on the reason why you have no signal.
Does flashing 5.0.2 kernel and radio ensures update of 4.4.4 to 5.0.2 dual Sim xt1033?
I have received official OTA but hesitant as am rooted with xposed.
Any help?
Sent from my XT1033 using XDA Free mobile app
vikraminside said:
Does flashing 5.0.2 kernel and radio ensures update of 4.4.4 to 5.0.2 dual Sim xt1033?
I have received official OTA but hesitant as am rooted with xposed.
Click to expand...
Click to collapse
They aren't absolutely necessary to run Android 5.0.2. For example you can use this ROM with your current 4.4.4 Radio:
http://forum.xda-developers.com/moto-g/development/rom-retail-brazil-lollipop-soak-test-t2998793
confusion
I have a gpe converted xt1033. Now I have restored stock 4.4.4 but I'm not getting any network. Should I flash the radio of dual sim version or single sim version since my phone was converted to gpe. Also rather restoring 4.4.4 Asia retail I should directly install stock 4.4.4 gpe and the radio of gpe.
hacnav said:
I have a gpe converted xt1033. Now I have restored stock 4.4.4 but I'm not getting any network. Should I flash the radio of dual sim version or single sim version since my phone was converted to gpe. Also rather restoring 4.4.4 Asia retail I should directly install stock 4.4.4 gpe and the radio of gpe.
Click to expand...
Click to collapse
You can flash the Dual-SIM 4.4.4 radio. Also flash the 'Kernel Modules' at the bottom of OP.
I installed the mokee rom for my moto g. It is the boost mobile variant and it doesn't use a sim card. I cant send a text or call anybody because it is asking for a sim card and I have no service since I installed the rom. Here is a screenshot.
ExcaliburEX said:
I installed the mokee rom for my moto g. It is the boost mobile variant and it doesn't use a sim card. I cant send a text or call anybody because it is asking for a sim card and I have no service since I installed the rom. Here is a screenshot.
Click to expand...
Click to collapse
If you havent noticed there isnt any CDMA roms for android L out yet only GPE and stock ones that arent dual sim.
Awesomeslayerg said:
If you havent noticed there isnt any CDMA roms for android L out yet only GPE and stock ones that arent dual sim.
Click to expand...
Click to collapse
Oh ok thanks for the quick reply.